134,073 used machines on RESALE, but how to find them? Machine Search
Komptech Multistar L3 Category: Star Screen Specification: Serial / reference number: 75070 Designation: Multistar L3 Performance: Weight: kg Emission class: Tier 4 Final / Stage V Equipment and description: Screen with 3 fractions – fine fraction (mm): 0/10... 25 Middle fraction (mm): 10... 25/60… 90; Coarse fraction (mm): > 90... 120 75 kW/A Diesel Generator Bunker volume: 7 m3 Feed height (mm): 3,450 / Feed length (mm): 3,750 Max. discharge height medium and fine fraction (mm): 3,500 / Max. discharge height coarse fraction (mm): 2,850 Weight approx. 21 tons / Transport length (mm): 11,500 / Transport width (mm): 2,250 / Transport height (mm): 4,000 Throughput depending on the type of material up to approx. 200 m3/h Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no ...
ESC-HIGH PRESS PLUS E3 Model 0 max. print size: 510 x 720 mm max. sheet size: 520 x 720 mm min. sheet size: 270 x 350 mm gripper margin: 10 mm Additional equipment: - RKS squeegee system - Antistatic device with control unit AFC-2 and SCPB electrodes 530 with cable length 180 cm including connector HV-4 - integrated cleaning station system TEKNEK in the machine inlet - equipped with ESC leading edge feeder Find more here - .ucymachines/
I think the machine dates from the 1990s. The machine was used until last year. It has been replaced by a newer machine. Have a nice day, This is an MPM Corporation screen printing machine. The model is as follows: UP2030. Find more here - .ucymachines/ Contact us at - sales@ucymachines
Komptech Multistar One Star screen with electric drive #6929 Facilities Multistar ONE EU Declaration of Conformity Feed hopper Anthology Machine documentation 5 inch touch panel Electric Hydraulic Pump HyDrive 2.0 MS ONE Doppstadt Siebdeck 60/90 Drive motors (2 pcs.) Fine grain discharge belt Oversize discharge belt Hook Lift axle Shunting drawbar Condition: Servicemaintained Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.
EKRA Drucker X3 Automatic Screen & Stencil Printer is expected to be available at the end of 2024 This system is part of an entire assembly line that can be purchased in its entirety It has a modified hood so that large stencils can also be used. This is the retrofitted stencil cleaning system (stencil underside cleaning). Installed in the machine The X3 automatic screen and stencil printer is specially designed for the flexible production demands of today’s market. The X3 can be used for the application of solder paste and / or glue onto PCBs, ceramics or glass substrates up to a size of max. 460 x 460 mm (18 x 18 inches). The standard EKRA screen and stencil holder has a flexible design which allows it to be used with all common stencils / screens up to 740 mm (29 inches) without use of an additional adapter. Quick clamp adapter systems of various manufacturers can e ...
Reference ID PP-59633 Category Screen Printer Manufacturer - Model S-LINE Year Built 2022 Color - Impression - Working Hours - Speed - - Max. Size - Min. Size - Condition Good Location Europe Availability Immediately Machine Description Screen Printing Carousel for Textile Printing VERSATRONIC S-lim Number of stations / pallets: 8 Number of print heads: 6 Maximum printing area: 400 x 450 mm Pallet drive: frequency-controlled AC servo gear drive Squeegee Drive System High-precision AC servo drive 4-piston POWER squeegee system Main Control Rotary arm with control panel and 7" SMART touchscreen Microprocessor with diagnostic program Printing Programs 6 standard programs High opacity MULTIFLASH program Cooling stop Test print Start / stop Screen cleaning mode Pallet stop between print heads Free running mode Accessories 8 aluminium sandwich pallets 420 x ...
Screening machine PAGUS sieve Ø approx. 2.5 and 5 mm Screen box: 400 x 295 mm approx. 63 stroke per min motor: 0.37 kW 380 V used, tested ! Dimensions: 1200 x 750 x 550 mm
Manufacturer: EKRA Model: X4 PROF Weight: 920 kg Year of Manufacture: 2008 Nominal Voltage: 230 V AC Frequency: 50/60 Hz Working Voltage: 24 V DC Number of Phases: 1 Power: 1.2 kW Circuit Breakers: 16 A Pressure: 6 bar Maintenance status: Machine is not currently serviced, but is fully functional Operating hours: unfortunately no counter in the system; machine has been running on average in 1-shift operation since the beginning of 2008 Accessories: 2x squeegee 220mm, 65°; 2x squeegee 350mm, 65°; 2x squeegee 350mm, 45°; 2x squeegee 450mm, 65°; 2 support plates 275mm Documentation: complete system manual in paper form Operating system: WIN XP Software version: SCBDRV V6.11-2 Last maintenance July 2024, shortly before the system was dismantled. Maintenance documented back to 2021. No documents available before that Does the offered system have an integrated SPI? What c ...
Manufacturer: EKRA Model: X5 Type of machine: Screen Printer Year of manufacture: 2002 Weight: 720 kg Power rating: 230 V, 50/60 Hz Power: 2.0 kW External fuse: 16 A Control voltage: 24 V DC Air pressure: 6 bar Find more here - .ucymachines/ Contact us at - sales@ucymachines
1 Deck Resonance Screening Machine - Workshop overhauled and tested
Resonance screening machine / feed chute with perforated sieve Workshop overhauled and tested
ID3825 Gravel washing plant / Kieswaschanlage year/Year of construction approx. 1996 Gravel washing plant, comprising: 1 single-deck washing screen (5.00 m x 1.70 m), 1 Fiebig twin-shaft log washer (6.00 m x 2.00 m), 1 double-deck washing screen (3.00 m x 2.00 m), 1 Stichweh dewatering bucket wheel (3.00 m), 1 single-deck scalping screen (3.20 m x 1.00 m), 1 container with 2 control cabinets, 1 container with Iveco generator set (175 kW, 2,900 hrs, AVK generator 200 kVA), 2 conveyor lines (length 90 m, belt width 0.65 m), 1 inclined conveyor (length 40 m, belt width 0.65 m), 1 inclined conveyor (length 20 m, belt width 0.65 m), 4 stockpiling conveyors (length 20 m, belt width 0.50 m), 1 double feeder (9.00 m x 2.50 m), 1 feeder conveyor (length 17 m, belt width 1.00 m), water pump on pontoon (suction line 200 mm, discharge line 150 mm), 1 discharge line (150 mm poly pipe, approx. 100 ...
ID3475 Binder ES/DD 2500x5 year/Baujahr 2019 Coarse sieve, double decker (45/65 perforation), housing has cracks, incl. motor and supports Coarse strainer, double-decker (45/65 perforations), housing has cracks, incl. motor and supports
A flatbed screen printing machine ESC is available. Print dimensions X/Y: 1200mm/800mm, max. print format: DIN A0, machine dimensions X/Y/Z: approx. 1550mm/1750mm/1200mm, weight: approx. 550kg. An on-site inspection is possible.
Manufacturer: HAVER NIAGARA Model: T-Class U 400x800 1D Year of Manufacture: 2023 Type of Machine: Screening Machine/ Vibrating Screen Find more here - .ucymachines/ Contact us at - sales@ucymachines
Screen deck 2-fold, 60x100cm Coarse/Fine: 3mm/5mm Coarse/Fine 2mm/6mm 4 pieces in stock
High-Load Analytical Sieving Machine, Used The ANALYSETTE 18 is the robust high-load analytical screening machine from FRITSCH. It effortlessly screens up to 15 kg of material between 20 μm and 125 mm. The three-dimensional screening movement ensures particularly fast screening results without manual post-screening and optimum reproducibility.The ANALYSETTE 18 is used for particle size analysis and fractionation of coarse-grained material. The feed quantity of a maximum of 15 kg for screening material and screen set also allows use in pilot line production or for serial testing of larger quantities. Preferably suitable for particle size analysis and fractionation of coarse-grained material by dry screening
CINTEX SENTRY METAL DETECTOR - SPARES COMPLETE FRONT SCREEN MODULE CONSISTING OF METAL WORK, SCREEN AND MAIN BOARD BOXED UNUSED STOCK OTHER MACHINE SPARES AVAILABLE PLEASE DO NOT HESITATE TO ASK
Construction Waste - Coarse – Sieve-SBR 4 Coarse material via rod sizer Fine grain over screen deck Capacity 140 cbm/h Manufacturer: BHS Type: SBR 4 Year of Make: 2020 Drive: 4 KW Weight: 5700 kg Dimensions: 4340 x 2990 x 2900 mm Location NRW Ex-site price net 33,000,-- € I offer as an intermediary on behalf of the owner. The information is non-binding, prior sale is reserved. The offer prices are net. If you don't like the price, please let me know your ideas. I am committed to realizing a price that meets your expectations. I am happy to answer any further questions you may have. Wilfried Goldmann +49 173 6242 600 (also WhatsApp) w.goldmannt-online
Knut Schneideer Sewing and Special Machine Construction Screening plant Serial number 001 Immediate availability Location Germany City of Erfurt (on the Haarberg) Number of screens: 3
Hydraulic power unit with pressure accumulator
Tub diameter 1900 mm Collection plate diameter 3200 mm Output depending on material 45 cbm/h
new ground sieve on electricity. can be moved with pallet fork, sieves in 3fractions Auction-ID: A3-46151-6999
Collection plate diameter 1900 mm Volume throughput 12 cbm/h
Screen round feeder with the new vat and overweight gearbox. Tub diameter 1900 mm Throughput capacity 45 cbm
A 6-color Kammann screen printing machine is available. Disk diameter: 120mm, cycle time: 75 cycles/min, colors: 6, UV dryer: 4, number of spindles: 2x8. Documentation available. On-site inspection is possible.
A small screen printing machine and a spray booth for print pre-treatment are available. 1) Screen printing machine (orange machine). 2) Spray booth SER.TEC. s.r.l. Cabina S / Apply Eco, year of manufacture: 2014. The system was only used for test purposes, as a print changeover took place. Documentation available. On-site inspection is possible.
-Capacity 20 – 40 tons/h -No documents -Electrically powered -New Auction-ID: A3-46151-219
Buser Rotary Printing Machine (Switzerland) Model: CH-3428 Type: R5B E 1850/24L Year: 1997 Printing: Blades Blanket newly installed Conveyor in Good condition Colours: 24 Open Bearing with Repeats: 640, 720, 820, 914, 1018 Repeat Gears: all Repeats 12 sets available Sequgee: Different Sizes (1 Lot) Entry with Dust Suction Slot High Efficiency 3 pass Two Dryer Chambers with Gas Heated Sequgee Washer 01 Set Screen Washer 01 Find more here - .ucymachines/ Contact us at - sales@ucymachines
STORK PEGASUS ROTARY SCREEN PRINTER STORK PEGASUS ROTARY SCREEN PRINTER. TYPE 3200/24/20 .Year 2001 20 colours installed on a 24 position print block. Max printing width 3200mm Repeat sizes 640/914mm . Magnet System print paste application. Comprising : High entry with fabric guide rollers E+L KF 2020 edge guiders ,dust extraction unit. Reconditioned and upgraded January, 2024 Fabric passage onto a Curved Plate with Thermoplast , Wet Gluing.Belt Washing. STORK APOLLO Dryer ,Type 3200. 2 compartments ,Gas heated with support conveyor. Ext with fabric take off rollers and plaiter. Complete Engraving machines included along with this machine. Find more here - .ucymachines/ Contact us at - sales@ucymachines
Two identical screen printing machines are available, max. frame dimensions: 750x1100mm, compressed air connection: 8bar, indexer connected load: 2.5kW, squeegee connected load: 0.6kW, an on-site inspection is possible.
GKM Siebtechnik KTS-V 600/1 – Vibratory tumbler screening machine (YOC 02/2021) Professional vibratory tumbler screening machine from GKM Siebtechnik (Waibstadt). Type: KTS-V 600/1 Serial Number: 3794 Year of construction: February 2021 Technical features: • Size 600 (sieve diameter approx. 670 mm) • 1-deck design • High-frequency, three-dimensional screening movement • High acceleration (suitable for dry and wet screening) • Modular, self-centering design • Parts in contact with the product in stainless steel • Maintenance-free vibration motor • CE and EAC compliant • Manufacturer: GKM Siebtechnik GmbH, Felix-Wankel-Str. 11, 74915 Waibstadt The machine is used, but fully functional and ready for use. Ideal for classification, fractionation and dedusting of dry and moist bulk materials in the food, pharmaceutical, chemical, plastics, minerals ...
A screen printing system including a feed table with XY adjustment is available. Printing area: 800mm/500mm, max. print object height: 160mm, max. frame dimensions X/Y/Z: 1290mm/760mm/40mm, max. printing speed: 500 prints/h, machine dimensions X/Y/Z: approx. 1700mm/1100mm/2000mm, weight: approx. 450kg. Documentation available. An on-site inspection is possible.
The most cost effective solution for extruders up to 3.000 kg/h., Very compact shape, less metal to heat up., High resistance to pressures line (up to 350 bar)., Minimum material waste due to the continuous cotamination removal., Adjustable speed of the discharge screw allows the finest handling. Continuous cleaning allows to use filters longer than traditional technologies., Pressure is kept constant all the time for a more even process, Easy maintenance: filter replacement easier and faster, without removing machine’s components. Also available with an automatic opening system that makes opening and closing lid’s operations easier, faster and safer., Double screening system : 2 x Ø 370 mm., With laser screens (from 60 to 350 µm), punched screens (from 400 to 2000 µm),, metallic mesh screens (from 230 to 10 mesh)., Bespoke screens available since they are produced in-house., Lase ...
SEMI-AUTOMATIC, NON-STOP SCREENCHANGER, Screen Ø 30 to 400 mm. Can fit any type of extruders with single or twin screws Made in sturdy steel on supporting wheeled cart for easy transport Smart construction out of our long experience in plastic extrusion Complete with control panel for temperature and pressure management Hydraulic power pack Connection flanges available on given design of pelletizer and extruder Single drawer with 2 sliding breakers (available also double/4 breakers), when asking for a quotation, please detail:, - Type of extruder, - screw (s) diameter, - production rate in kg/h, - material tyupe, - material MFI, - contamination and average %, - filtration required in mesh or my, type: Semi-automatic, non-stop
Simon RPNP automatic multi-palox leek harvester – 2022 – 4,000 mm picker – 7\" touchscreen Specifications: Brand: Simon Type: RPNP Year of construction: 2022 Application: automatic leek harvesting / multi-palox Own weight: approx. 3,750 kg Dimensions (L × W × H): approx. 5,250 × 4,745 × 3,000 mm Required tractor power: from approx. 110 hp, with crawler gears PTO: 540 rpm, 6 splines, 1 3/8\" Picker length: 4,000 mm Peeling length: 460 mm Cutting height: approx. 580-650 mm Cutting height of industrial leeks: approx. 440-500 mm Suitable for containers up to approx. 1,900 mm high and 2,200 mm long Features: Double hydraulic pump unit Water-repellent picking belts Hydraulic brushes and leaf polisher Hydraulic first beater Peller 2 smooth blades for cutting the foliage 7\" touchscreen control Memory for 4 container sizes Automatic left/right moving read/ ...
Complete THIEME 3050 screen printing line with TESOMA hot air + UV drying tunnel and automatic stacker at the outlet. Large format industrial assembly to be overhauled. THIEME 3050 screen printing Maximum print size: 1,400 x 1,800 mm Maximum sheet size: 1,430 x 1,870 mm Maximum frame size: 1,900 x 2,200 mm Maximum media thickness: 50 mm Squeegee speed: 0.2 to 1.4 m/s Fine screen adjustment: +/- 5 mm Machine-only footprint: 3,975 x 2,832 mm (L x W) Machine weight alone: approx. 1,900 kg Power supply: 400 / 230 V - connection power 2.8 kW TESOMA drying tunnel (2005) Hot air + UV drying Installed power: 60 kW - heating power: 43 kW Power supply: 400 V - 50 Hz - 134 A Recent UV lamp and conveyor belts New UV lamp sets included (in stock) Service meter read at 11,168 hours Additional equipment Automatic stacker at the end of the line Remova ...
Vibrating screen with 3 levels motor 4 kW Very good condition, Immediately available!
with cover Auction-ID: A1-49804-29
Manufacturer: Buhler Model: SORTEX E PolyVision Year of Manufacture: 2018 Type of Machine: Optical sorting line Sorting Capabilities: - Capable of separating materials by color, including black and polymers. - Detects and partially ejects aluminum based on color recognition. Included Components: - Operator platform - Water chiller (~3.5 kW) for cooling - Flake feeding system with fan-assisted delivery - Suction system for good flakes with transfer to a packing cyclone - Cyclone/bunker unit with big bag frame and pneumatic cylinders - Separate suction and cyclone system for rejected (bad) flakes Performance: - Proven throughput of 1 to 1.3 tons per hour with sufficiently clean flake input Additional Applications: - Suitable for sorting berries and other small-sized items Technical Specifications Dimensions (Service Access - Including Vibrator): - Width: 2651 mm (104.8 in) - ...
TECNOVA RECYCLING EXTRUDER for BIO - PE PP ABS PC PS, Barrel with 90 mm screw diam. 37 L/D, Crammed feeding unit, Is working with BIO at 70 rpm yielding 270 kg/h, with PE at 100 rpm yelds 120 kg/h, N.1 degassing point, hydraulic screenchanger, water ring pelletizer from Gamma Meccanica, drying centrifuge, rotating classifier, electric cabinet for omplete management of the line, availability: 4 weeks for reconditioning or 1 week for AS IS, capacity: 120-270 kg/h, conditions: reconditioned, type: 90 mm. crammed feeder for light scraps
Rotary Brush Screen Properties: Total height 1900 mm Overall length 580 mm Depth 500 mm
maximum number of results exceeded
please refine your search
10 € 
