We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,818 used machines on RESALE, but how to find them? Machine Search
used
Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002 Operating hours 43,954 hours, stand March Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: As can be seen in the photos, some maintenance work needs to be carried out. The seal set of the main hydraulic cylinder must be replaced. In general, the hydraulics should be cleaned and a seal replac ...
used
Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Kampwert Umwelttechnik GmbH & Co. KG) Type HC 50 (formerly HPK 50 BK) Year of manufacture 2007 Operating hours 11,970 hours, as of March Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 ...
used
Well drilling rig, drilling mount, UNIMOG drilling rig, UNIMOG drilling rig -Well drilling rig: on Mercedes Benz UNIMOG 4x4 with truck tandem trailer -Unimog: Mercedes Type 435 built in 1976, mileage: 97,243 km -Trailer: Schmid type MTT500 built in 1991 -Drilling rig: drilling power turret U 58 (company AGBO) torque 1700 Nm, speed 140 min -Linkage tensioning device: up to 165mm -22 boring bars: Ø 76mm length 4 m total length 88 meters -Theoretical drilling depth: 150 meters (depends on the soil and diameter of the drill hole) -1 flushing pump: Hatz 30C 30L, with Reno standard block pump type 65-250/263, 100m³/h, 8.9 bar -Price/tax: complete -Dimensions: Truck 6250/2300/H3350 mm / Trailer 6300/2400/H3050 mm -Total dimensions: 11300/2400/H3350 mm -Weight: kg
used
Description: Arbeitsbreite Bürsten 400 mm Arbeitsbreite Absaugung 400 mm Frisch-/Schmutzwassertank 10 / 10 L Theoretische Flächenleistung 400 m²/h Praktische Flächenleistung 300 m²/h Bürstengeschwindigkeit 1100 U/min  , Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,200 mm, weight approx.: 40 kg
used
Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine docu ...
used
From operating resolution: Dulevo 75 EH Basu Year 2016 Running hours 435 Sweeping width 950mm Sweeping roller width 700mm Theoretical area performance 5700m²/h Speed 6km/h Tire Solid Rubber Battery 24Volt with charger --good condition-
used
Technical data baler: Manufacturer unoTech GmbH, Niederlangen, Germany Typ 120 V5 Year of construction 2009 Press force main press 100 tons Specific press force 145 N/m² Max. cutting force 120 tons Press force free stamper 25 tons Feed channel 2,000 x 1,020 mm (l x w) Capacity per cycle time 1,5 m³ Theoretic throughput rate 650 m³/hour Bale size 1,100 x 750 mm (w x h) Driving motor 2 x 75 kW Connected load 160 kW Rated current 280 A Tying system 5-fold vertical, fully automatic Throughput rate at a bulk weight of 20 to 30 kg/cbm up to 15 tons/hour bulk weight of 35 to 50 kg/cbm up to 23 tons/hour bulk weight of 60 kg/cbm up to 27 tons/hour bulk weight of 100 kg/cbm up to 44 tons/hour Bale weight 600 up to 900 kg, depends on material SPS controller (manuf., type) Siemens S7 300 Operating panel (manuf., type) Siemens SIMATIC Transport dimensions only baler 13.630 x 2.350 x 3.130 mm (l x ...
used
Description: Daewoo floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L Connection voltage 230 V Battery 24V / 100Ah Brush diameter 510 mm Speed 175 rpm Suction power air 24 L / s Tank volume 50 / 50 liters Weight 160kg Dimensions L-W-H 1.1 x 0.52 x 1.0 m weight approx.: 160 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 520 x 1,000 mm
used
Description: Technical data Locking force 120,000 kN Preforming force 2,400 kN Retraction force 2,000 kN Max. Mold weight upper part 30,000 kg Plunger stroke 1250 mm Closing speed (theoretical 450 mm/s)400 mm/s Max. Pressing speed 150 mm/s Return speed (theoretical 450 mm/s) 400 mm/s Positioning accuracy ± 0.1 mm Measuring resolution 0.01 mm Pressure regulating systems for gun pre-tensioning Number of independent systems 2 sets (1 x top, 1 x bottom) Max. Pressure 25 MPa Max. Return flow rate 2 x 900 l/min Accuracy of pressure regulation ± 0.5 MPa Pump - Motor Pump capacity 3 x 360 l/min Max. Working pressure 30 MPa Electric motors (3 x 160) 480 kW Electric motor cooling/filter circuit22 kW Speed1450 rpm (50 Hz) Pressure accumulator system Min. - Max. Working pressure 27 - 30 MPa Volume piston accumulator (6 x 50) 300 liters Oil tank volume 4000 liters ...