the unit compressor used for sale

External extraction 0.37 KW 380 V 16 A 3 ports Length 40 cm Width 50 cm Height 84 cm

Hydraulic unit, hydraulic pump, hydraulic pump -Spare part E forklift -Power supply: 24 volts -Power: 2.8 kW -Speed: 1600 rpm -Hydraulic tank -Weight: 70 kg

Hydraulic unit, hydraulic pump, hydraulic pump -Max. pressure: 80 bar -Liter flow rate: 18 l/min -Motor: 2.2 kW 950 rpm -Hydraulic tank: 800/650/H280 mm -Dimensions: 1000/650/H1150 mm -Weight: 400 kg

Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: 100 bar -Liter flow rate: 6 l/min -Hydraulic tank -Hydraulic valve -Weight: 110 kg

Hydraulic unit, hydraulic pump, hydraulic pump -Max. pressure: 63 bar -Liter flow rate: 4 l/min -Drive: 0.75 kW -Hydraulic tank -Hydraulic valve - Additionally: Hand hydraulic pump -Weight: 110 kg

Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: approx. 40 bar -Liter flow rate: 15 l/min -Drive: 0.55 kW 1400 rpm -Hydraulic tank -Foot switch -Weight: 100 kg

HIGH SPEED MULTIFORMAT POUCH MACHINE MATERIAL WIDTH :1200MM (MAX) MATERIAL DIA : 1000 MM (MAX) POUCH WIDTH : 50-650 MM POUCH LENGTH : 30-300 MM - (250 MM X 6 =1500 MM) MACHINE SPEED :180CPM /45 meters POWER : 220V, 3 PHASE, 50/60 HZ COLOR: : STAINLESS STEEL/White COMPLETE WITH: - SHAFTED UNWIND ST AND X 1 SET - UNWIND DIA. 800 MM WITH ROLL - 3" AIR SHAFT - 2.5 KW POWDER BRAKE WITH ROTARY ENCODER AND DANCER FOR TENSION CONTROL - .55KW DRIVE MOTOR NIP WITH INVERTER CONTROL FOR UNWIND UNIT FOR CONTINUOUS MOTI ON UNWINDING - LPC SENSOR FOR UNWIND MATERIAL FOR EDGE/LINE GUIDING - PHOTO SENSOR (NT-6) FOR PUNCHING AND ELECTRONIC TOUCHSCREEN CONTROL FOR POSITIONING X 1 SET - DANCER ROLLER DEVICE X 1 SETS - UNWIND STAND CAN BE MOVED LEFT/ RIGHT BY MANUAL - ADJUSTMENT FOR QUICK SETUPS Material folding device for gussets x 1 set. Material ...

Ser. No.: PJ000400 // Type: PJ.003.0000 Print plate size (mm): 240 x 240 up to 670 x 525 Plate thickness (mm): 0.15 to 0.30 Equipment / Additional information: G & J stacker Software, RIP, Computer The machine has 1 laser head with 64 diodes Very good condition // Dismantling, packaging of the machine and securing (insurance of the machine during transport) were carried out by the manufacturer / Heidelberg.

Double-end tenoner, edge processing machine, flush trim router bit, edge router bit, spindle motor, milling motor -2x motor: 0.4 kW 20 shaft 11300 rpm at 200 Hz -Motor: mounted on guides -Motors: swiveling -Cutter: with indexable inserts -3x consoles: each with 2 motors Price: per piece -Weight: 60 kg/piece

Spindles, machining unit, automatic drilling machine, drilling machine, pillar drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Max. feed rate: Stroke 60 mm -Drive: 1.1 kW -Recording: 10 x 17 mm -Number: 2x quill processing units available Price: per piece -Weight: 25 kg/piece

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.15 kW 11160 rpm at 200 Hz -Saw: max. Ø 150 mm -Motor: mounted on guides -Travel distance: 320/100 mm -Dimensions: 550/250/H330 mm -Weight: 17 kg

Heating elements control unit -for: heating elements -Connection: from the electrode welding machine -Regulator and recorder -Handover in its current condition as inspected -in transport crate -Weight: 80 kg

Heating elements control unit -for: heating elements -Connection: from the electrode welding machine -Regulator and recorder -Handover in its current condition as inspected -in transport crate -Weight: 95 kg

Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: approx. 150 bar -Liter flow rate: approx. 30 l/min -Drive: 3 kW 1400 rpm -Dimensions: 520/360/H340 mm -Weight: 65 kg

Beumer bar band 1360-680-430 + injection unit 30° 800-680-430 RA1262 Injection unit 30° consisting of a clock band and a triangular band. Scaffolding and cladding are made of profiled steel sheet. The drive is carried out by means of a gear edgear motor and belt drive. Without control and connections to upstream and downstream conveyors Technical data: Manufacturer: Beumer Year built: unknown Condition: good (used) Engine: fully functional Data Triangular Band Type: Injection unit 30° 800-680-430 Angle (injection): 30° Conveyor length (FL): 1360 mm Nominal/outer width (NB): 680 mm Usable width (NUB): 430 mm Wide transport belt: 393 mm Drive drum: dia. 74 mm Deflection roller: 63.5 mm Funding speed: 2.0 m/sec Engine power: 0.55 kW Data clock band: Type: Tape 1360-680-430 Function: Acceleration tape Conveyor length (FL): 800 mm Nominal/outer width (NB): 680 mm Usable width  ...

Gebhardt roller curve conveyor 45° 610-550 with inclined inlet 45° RA1279 The Gebhardt roller curve is from 2007 and in a good (used) condition. It has an engine of the brand SEW. Supports and side guides are not included in the scope of delivery. These are optionally available. Technical data: Manufacturer: Gebhardt Type: 314.01 Position: 010.05.1 Built: 2007 Condition: very good (used) Engine: fully functional Angle: 45° Nominal/outer width (NB):610mm Usable width (NUB): 550 mm Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2.00/1.15 Funding speed: 0.35 m/sec Drive: Head drive Rolls: Type: G6/50 sliding bearing with conical plastic molded part Weight: 45 kg Scope of delivery: without supports and side guide (if necessary please enquiries) Optional Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment  ...

Rolling curve 45° with a criminal Conveyor curves, drive Centre Make: Transnorm Type: TS 2712 Year of construction: 1995 Project A49993 POS. 665 Conveyor angle: 45° Width: 500 mm constant speed V = 0.78 m/sec Role: slide stored with conical plastic molding and metal rollers without posts Optional columns Shipping weight: 120 kg on euro pallet Transportmasze: L x B x H = 1800 x 700 x 400 mm Features: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

SMU Unit without batteriepack, 3HAC14757-1/01, ABB, used-function assurance Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - had been in storage for quite some time, - is in very good condition and fully functional, Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case  ...

Unit without battery pack, 3HAC8365-1/01, ABB, used-function assurance Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - had been in storage for quite some time, - is in very good condition and fully functional, Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of di ...

A total of 8 pieces available, price per table Pros: - Due to the narrow design of the base, good accessibility of the elements from all sides - Large adjustment range of the contact surface by extending the diamond-shaped pads - Tools and small parts always ready to hand on the shelf on the assembly tables - Support rails optionally covered with rubber, brushes, sliding strips or felt - No cable clutter when using the implement carriers: the machines are always ready to hand at the place of use Equipment: - Work surface covered with profile rubber - Diamond shaped supports in the edge area for placing profiles in the longitudinal direction - Height adjustable 900 – 1,100 mm

We sell a used system of recycling machines with the following components (built in 2004): - Chip crusher type RS 300 E with coarse part outlet (Steimel) - Scraper belt conveyor with torque cut-off (DGS) - Chip centrifuge AZ - 250 (ARP) - Vacuum valve VSS 100 (ARP) - Pump sump (ARP) - Vibrating sieve -Switchboard The facility is fully functional and can be picked up.

hydraulic unit, hydraulic pump, hydraulic pump -max. pressure: 200 bar -Liter output: 6 l/min per pump -Drive: 0.55 kW 1360 rpm -hydraulic tank -Number: 4x units available -Price: per piece -Weight: 95 kg

impressions: 28 Mio. max. printing speed sheets: 10000 /h max. paper size: 34 x 46 cm serial no.: 956.596 total weight with 2 piles: 1030 kg paper thickness max.: 0,3 mm numbering unit: minus Version Dimensions (L/W/H): 160x110x160 mm dampening system: Direktfilmfeuchtwerk Stack height: Anleger 490 mm Stack height: Ausleger 460 mm power required: 3,0 KW frequency: 60 Hz voltage: 220-240 V 3 inking forme roller per printing unit Blanket washer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

impressions: 42 Mio. max. printing speed sheets: 10000 /h max. paper size: 34 x 46 cm serial no.: 961.450 total weight with 2 piles: 1030 kg paper thickness max.: 0,3 mm numbering unit: minus Version Dimensions (L/W/H): 160x127x160 cm dampening system: Direkt Dampening System plate clamping system: Autoplate powder device: ink unit wash-up device blanket washer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data Maximum pressure: 50 tons Year of Make: 1994 Pressing force: 7.14 kg/cm² Number of bindings: 3 horizontal Channel cross-section: 1000 x 700 mm Dimensions of the tailgate: 145 x 95 cm Bale weight: do 500 kg Weight: approx. 10 tons Power connection: 400 V/ 45 kW Bale tying: automatic Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers Large flaps of the bale chamber for easy maintenance

impressions: 42 Mio. max. printing speed sheets: 10000 /h max. paper size: 34 x 46 cm serial no.: 958.026 total weight with 2 piles: 1030 kg paper thickness max.: 0,3 mm numbering unit: minus Version Dimensions (L/W/H): 160x127x160 cm dampening system: Direkt Dampening System plate clamping system: Autoplate powder device: ink unit wash-up device blanket washer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

impressions: - Mio. max. printing speed sheets: 10000 /h max. paper size: 38 x 52 cm serial no.: 8212074 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

impressions: 35 Mio. max. printing speed sheets: 10000 /h max. paper size: 34 x 46 cm serial no.: 957.449 total weight with 2 piles: 1030 kg paper thickness max.: 0,3 mm numbering unit: minus Version Dimensions (L/W/H): 160x110x160 mm dampening system: Direktfilmfeuchtwerk The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

impressions: - Mio. max. printing speed sheets: 13000 /h max. paper size: 36 x 52 cm serial no.: 1809 dampening system: konventionell The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Linear unit with planetary gearbox, stroke 1028mm, RK Monoline Z 60, RK Rose+Krieger, used Top Used - top condition like a demonstration unit The part was removed from a pilot system that was only used for a short time and is in almost new condition. Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. The current price of a similar product is € 1980 excl. VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. Technical data: - Linear unit RK Monline Z 60, with toothed belt drive, RK Rose+Krieger, - Incl. 2 tables 187 x 140mm, table 1 is driven, table 2 is freely movable - the 2nd table can be removed - Max. stroke when using one table = 1028mm - Variable positioning of the drive - Connection linear unit - Gearbox with backlash-free Rotex ...

Hydraulic unit, 330 bar, 10 circuits, 2 servo motorised pumps, 130L, Niehues, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The system was only in operation for a few years and is in top condition. Technical data - Operating pressure 330 bar, 5.1 L/min per pump, 130 L, valve voltage 24VDC, Here are the most important, system-relevant parts of the system, the current new value of these parts is approx. € 32,000. - 2 pcs servomotors 1FK7084-2AC71-1HA0, Siemens - 2 pcs radial piston pumps R 3.6 Hawe + Rotex coupling - 1 pc Aluminium tank NG 13 - 2 pcs pressure relief valves RDM2PT35SVG, Parker - 2 pcs 4/2 way valve D1VW002ENJW, Parker - 10 pcs Check valve CPOM2DDV, Parker - 10 pcs 4/3 way valve D1VW004CNJW, Parker - 8 pcs pressure reducing valve PRDM2PP35SVG, Parker - 20 pcs pressure switches EDS 3446-3-040 ...

impressions: 41 Mio. max. printing speed sheets: 8000 /h max. paper size: 36 x 52 cm dampening system: Alcohol numbering unit: optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We sell 4 pieces of used welding units, welding rectifiers, brand Lincoln DC400, year: 1993, functional, in need of easy repair, only for export For purchase of 4 pieces Price per piece 500,00 E net Single price 600,00 E net

impressions: - Mio. max. printing speed sheets: 6000 /h max. paper size: 46 x 64 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TGW curves roller conveyors 45° left Order no. 150072 Item 03.0721 year of manufacture: 2012- working width: 345 mm plastic rollers working width: 400 mm metal rollers total width: 480 mm inner radius: 1050 mm speed: 0.45 m / sec lateral guide on both sides Rollers: conical plastic molded rollers: Metal Optional: 3 supports Shipping dimensions: Lxwxh 2200 x 800 x 400 mm: 90 kg Features: Running direction: LEFT Construction year: 2012 condition: very good (used) Nominal / outside width in mm: 480 Roll width in mm: 345 angle: 45° Driven: YES Engine type: SEW Eurodrive Conveyor speed m / s: 0,45 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf v ...

Key data: 700 bar, 3 kW

Hytorc High Pressure Hydraulic Pump 700bar, 400V, 3kW with Test Certificate High Pressure Hydraulic Pump Manufacturer: Hytorc Seis GmbH Type JetPro 18.3-4T with integrated, electrically ventilated hydraulic oil cooler. Printed test certificate from 2018, then no longer in use! The hydraulic power unit was used to transport turbine shafts weighing several tons to a hydraulic oil cushion to rotate smoothly and easily. For example, turbine shafts were tested for concentricity and damage. The article is available multiple times.

Ser. No.: 023910293 // Speed: 20 plates /h Counter: 69'068 plates Format (cm): 50x70 Equipment / Additional information: With Server, Trueflow Software with integrated plate punch with 40 laser diodes (individually replaceable) Very good condition // Dismantling, packaging of the machine and securing (insurance of the machine during transport) were carried out by the manufacturer / Heidelberg.

Key data: 250 mm, 5 kW, 4700 m³/h

Spänex dust extractor SMU 4500.11 Suction nozzle 250 mm Cleaning vibrating motor Nominal flow rate 4700 m³/h Minimum flow rate 3530 m³/h Motor 5.5 kW Filter renewed

CNC control, power supply, switching power supply, controller, control unit, Promodul -Manufacturer: AEG, control unit -Type: LOGISTAT CP 80-A04.1 -Dimensions: 485/130/H170 mm -Weight: 5.3 kg

Hydraulic power unit, hydraulic pump, hydraulic pump -Hydraulic unit comes from a 15 t lifting platform -Max. pressure: 130 bar -Tank capacity: 100 liters -Motor: 7.5 kW 1450 rpm -Equipment: Emergency hand pump, hand valve, electric valve, emergency drain, -Dimensions: 1130/445/1320 mm -Weight: 334 kg

Rotary unit, rotary device, turning table, turning unit -Roller conveyor length: 850 mm -Rollers: Ø 80-120 mm -Roller spacing: 190 mm -Roller width: 220 mm

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir and valves -Hydraulic pump: Pressure up to 150 bar -Flow rate: 4 l/min -Motor: -Individual components: see photos -Dimensions: 380/220/H450 mm -Weight: 28.7 kg

Compound plant Bitzer with 6 pcs. compressor Bitzer S6F-30.2Y, in a container as a machine room, with control box fixed wired and condenser with 6 fans on the container.

Blast Freezer Refrigeration Unit Bitzer 16 HP Two-stage with evaporator LH135-S6j-16.2Y, 63,5 cbm/h Vaporizer Crocco Italy

Weber Assembly Table Joining Station Solid industrial assembly table / joining station from the quality manufacturer WEBER Konstruktion Maschinenbau GmbH. The machine features an extremely solid basic mechanical design and is ideal for production plants, workshops or as the perfect base for a modernization project Technical data (according to nameplate): Manufacturer: WEBER Konstruktion Maschinenbau GmbH (Aschaffenburg) Type: Assembly Table Machine No.: BA 659 00 Year of manufacture: 08 / 2000 Electrical connected load: 380 V (CEE plug available) Connected load pneumatics: 6 bar "Everything from a single source: We will be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de More items - new and used - can be found in our shop! International shipping costs on request!

Koma blast freezer refrigeration unit with Bitzer compressor S6F-30.2Y, as solo compressor or S66F-60.2Y, tandem compressor Refrigeration unit with compressor, subcooler, oil separator, liquid separator, collector, filter, pressostats, control box. All on one rack, easy to transport.

Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punch die, punching die -Punch tool: Angle notching tool, notching unit -Dimensions: see photos -Dimensions: 150/130/H80 mm -Weight: 4.4 kg

Inv. Num. : 6803 Type: SUPRAREX SXE P-1 400 Producer: ESAB Created: 2007 Parameters: Table height: 700 mm Cutting speed: 24000 mm/min Sheet thickness: 300 mm Cutting length: 2x6000 mm Cutting width: 3000 mm Machine height: 2190 mm Machine length: 2025 mm Machine width: 4654 mm Machine weight: 2000 kg

Stationary high-pressure pump unit Hammelmann HDP 77 on base frame. Similar but no Kamat, Uraca, Woma. Pump Type: HDP 77 Operating pressure: 330 bar Flow rate: 59 l/min. Drive speed: 1500 rpm. Drive power: 37 kW with Siemens 1LA6223-4AA60 electric motor 45 kW with pressure regulating valve, Fzhoqck with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,450x750x1,150 mm Weight: approx. 600 kg Year of construction: 2019 Condition: In good used condition.