the unit compressor used for sale

High-temperature oven with a maximum working temperature of 1,800C and lowerable/swivel bottom. All sides of the furnace chamber are heated with Kanthal super elements (= MoSi2). Temperature homogeneity is achieved by downward removable U-elements. Operation with 3 transformers and thyristor control. Chamber dimensions: 500 mm x 500 mm x 500 mm (= 125 l.). The oven is practically unused (only about 50 fires).

Stone slabs / cooker trolley for oven HEUFT VTR or Daub Thermo roll possible 2 x or 3 x deep oven width 80 cm or 100cm and how much floor you need. All for special bestelung

New venture for special order Requirements as you need all standart with daub/HEUFT 60 x 80 cm or 60x80cm sheets Stainless steel New

Buggies - HEUFT - Daub Thermo roll VTR for baking on stove. possible 2 x or 3 x deep oven width 80 cm or 100cm and how much floor you need. All for special bestelung

Baking cart - HEUFT - Daub Thermo roll VTR for baking on stove. possible 2 x or 3 x deep oven width 80 cm or 100cm and how much floor you need. All for special bestelung

Thermo Scientific Wellwash Microplate Washer  Description Wash 96-well plates reliably with the Thermo Scientific Wellwash, an easy-to-use and reliable microplate washer for routine ELISA applications. The washer is equipped with a graphical user interface, different language versions and a USB port for optimal ease of use and excellent convenience. Characteristics: Large, clear color display and keypad ensure ease of use User interface is logical and intuitive and enables fast protocol programming Easy-to-use software requires minimal training and ensures a quick start Pressure-free bottles are safe to use Liquid level sensors in washing and waste bottles ensure safe throughput Automatic pre-rinse function ensures safe performance Aerosol cover prevents the escape of aerosols of infectious material Plate sensor detects whether a plate is present or not Wellwash is used to ...

Multiskan FC Microplate Photometer with Incubator A wide range of applications, from enzyme kinetic studies to Lowry assays The Multiskan FC covers a wavelength range of 340 to 850 nm, allowing for a wide range of applications, from enzyme kinetic studies to Lowry assays. The device takes fast and accurate measurements. For example, the complete measurement of a 96-well plate is possible in less than seven seconds. The device is equipped with a linear shaker as standard. An incubator model reaches incubation temperatures up to 50°C and is capable of reading 384-well microplates. SkanIt software supports the optimal use of the device through a visual workflow, effortless data analysis, and export capabilities. Characteristics In addition to the common features of all microplate readers, the Multiskan FC offers: SkanIt Software The SkanIt software can be used to control the  ...

Checkweigher manufactured by Thermo Ramsey Italia S.r.l. RXM model. Year of construction 2008. Machine for checking weight deviations from the nominal weight of a series of similar objects. These deviations are then compared with the previously set accepted weight limits and the weight trend of the products from the production line on which the equipment is installed is automatically calculated. The machine consists of an electronic control panel and a main frame on which the transporters weighing and carrying objects are mounted. The high-speed processing comparison system has a detector that continuously converts the weighing plate position signal that changes during weighing (the passage of an object through the weighing plate) into an electrical signal. The weighing signal from the weighing plate is amplified and electronically processed. It is converted to a number and a compa ...

Thank you very much for your interest in our Theegarten cooking - and mixing machine for yield and hard candy also heavy masses of the type KM, which we are allowed to offer as follows: manufacturer: Theegarten type: KM cooking and mixing machine for heavy masses Boiler contents usable: 175 Liter/charge Machine measurements: 1600 x 1750 x 2750 mm (width x deep x High) Machine net weight: 1480 kg Details: Sugar cooking and mixing machine for yield and hardcandy, steam heated New parts; bearings, seals, gearoil, new electrical box, complete painting Testrun without product I offer this machine in checked, cleaned and tested (without product) condition

20,000 liters tank with thermal insulation not used tanks

Material: PVC / Details: DC motor 70 kW, degassing, counter-runner, vacuum pump, screw diameter 88-151 mm (conical) Throughput: approx. 300 - 400 KG/hr.

Material: PE, PP, PS, ABS, // Details: DC motor: 93 kW, degassing, screw diameter 115 mm, L/D 26

Make: THERMOKEY Type: 46 W2 54 3 7000 21 41 C T Year built: 2010 Power: Volume: 242.6 litres Pressure: 10 Bar Max Temperature: +120 °C Min. Temperature: -40 °C Fan: x 900mm 4 pieces Available Price on request Contact details can be found under Contact

Thermo Scientific Metal detector Model: Apex 500 Stainless frame, elevates from 300mm to 950mm, pneumatic blow reject with reject bin, 450mm x 160mm, belt dimensions 3300mm x 320mm, 3Ph, mobile

Multivac M860F MC Thermoforming Packaging Machine High-performance thermoforming packaging machine designed for vacuum and modified atmosphere packaging (MAP) applications. The Multivac M860F MC offers reliable operation, flexible format handling, and hygienic stainless steel construction, making it suitable for industrial food packaging environments. General Information - Manufacturer: Multivac - Model: M860F MC - Year of Manufacture: 1995 - Operating Hours: approx. 30,000 - Ownership: Single owner - Origin: Switzerland - Current Location: Sharjah, UAE - Production Status: Ready for immediate installation and production - Condition: Excellent used condition - Vacuum Pump: Not included in the scope of supply Machine Dimensions - Length: 670 cm - Width: 96 cm - Height: 190 cm Film Specifications - Film Width: 420 mm Packaging Formats Forming Dimensions - 250 ...

Qty. 1 Second-hand H-Beam production line Mfc.: Production Line: B&K Welding Machines: THERMATOOL Saw Cutting: LINCOLN Driving Part: Seoho Electric Drive: PAKER PLC: MITSUBISHI Leveller: FLATTENER Press cutter & DDS: Samyang Run-out Table: Wuchang Production range: No. Class Width (mm) Thickness (mm) Length(M) 1 Web 53 ~ 450 2.3 ~ 12.0 6.0 ~ 18.0 2 Flange 50 ~ 300 3.0 ~ 12.0 Capacity: 60,000 MT/annum Equipment total weight: approx.139 MT First installation: 10/1973 Type: Welding H-Beam Facility Welding Type: Electric Resistance Welding Cutting type: Cut-Off Saw, Presscutter Line Speed: Max. 37 m/min.

MTA Spotcooler SC7.3 Manufacturer: THERMOBILE INDUSTRIES BV Type: Coolmobile 25 (industrial version) Mobile spot cooler Coolmobile 25 for selective cooling of e.g. material, cooling tunnels, room areas and heat sources. The Spotcooler is mobile via wheels and can be easily driven to the place to be cooled. The control panel has an adjustment range of +1°C to +31°C and can be switched on and off automatically via a timer. The device can be used anywhere via a Schuko plug (230V / 50Hz). Cold air can be distributed via three flexible hose nozzles. Warm air can be discharged via a flange and warm air hose (both not included). Specifications: Cooling capacity / kw 7.32 (25,000 Btu) Air flow m/h 10.5 - 8.5 Power connection / V / Hz 230 / 50 Starting current / A 57 Operating current / A 13 Power consumption / Kw 2.6 Air filter aluminum and carbon Max. static pressure / mm 3 ...

MTA Spotcooler SC7.3 Manufacturer: THERMOBILE INDUSTRIES BV Type: Coolmobile 25 (industrial version) Mobile spot cooler Coolmobile 25 for selective cooling of e.g. material, cooling tunnels, room areas and heat sources. The Spotcooler is mobile via wheels and can be easily driven to the place to be cooled. The control panel has an adjustment range of +1°C to +31°C and can be switched on and off automatically via a timer. The device can be used anywhere via a Schuko plug (230V / 50Hz). Cold air can be distributed via three flexible hose nozzles. Warm air can be discharged via a flange and warm air hose (both not included). Specifications: Cooling capacity / kw 7.32 (25,000 Btu) Air flow m/h 10.5 - 8.5 Power connection / V / Hz 230 / 50 Starting current / A 57 Operating current / A 13 Power consumption / Kw 2.6 Air filter aluminum and carbon Max. static pressure / mm 3 ...

Top condition, completely serviced and checked, built in 2018 incl. 2 backing pumps, IonMax source, HESI sample, PC and SW. THERMO Q-Exactive HF-X High Field Orbitrap High-resolution mass spectrometer for the analysis of proteins, peptides, lipids, glycans and small molecules. The Q Exactive RF system combines a segmented quadrupole for high-performance precursor ion selection with an ultra-high-field Orbitrap mass analyzer with high resolution and accurate mass determination (HR/AM) for an optimal combination of scanning speed, resolution, mass accuracy, spectral quality, and sensitivity. I Identify, quantify and confirm components in a single analysis with the Q-Exactive HFX mass spectrometer.

According to description pdf attached complete line for profiles + WPC profiles

Used lab centrifuge SL 40 THERMO SCIENIFIC. New 2017, available 2 pcs.

cutting range for steel to: 76 mm capacity at 100%: 51 mm cutting medium: 400 Amp regulated drive: 50-150 und 100 - 400 AmpSteuerSteuer control voltage: 24 Volt weight of the machine ca.: 750 kg dimensions of the machine ca.: 82 x 122 x 930 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SALE ONLY COMPLETELY! NO RETAIL SALE! ALSO APPLIES TO WMF MACHINES. THEREFORE SAVE YOURSELF THE CALLS, HOW MUCH DO YOU WANT ONLY FOR THE WMF ETC... Coffee machine - Espresso machines 2x WMF Cafemat 5x Wmf Presto 2x WMF 1000S 11x Thermoplan Tiger (1x WMF 1000 S I kept to myself and is now in my office) in total there are 20 coffee machines A few machines are defective. or a few parts are missing. A box full of parts for the WMF is available. The machines are sold without warranty and guarantee, in net.

Rack trolleys for Daub Heuft Thermo Roll trolley furnaces Rack trolley stainless steel for Daub Heuft Thermo Roll trolley furnaces with 10 af layers. -suitable for Heuft VTR 08.12,5.10 -suitable for Daub RDTO -Wagons are equipped with 10 editions -for sheets 60x100 or 58x78cm -Outside dimensions: 86.5x65cm and 193.5cm high

Thermopöl Pump Magnetic Pump for Daub Heuft Thermal Oil Furnaces

Rack trolley for Heuft Daub thermal oil furnaces for 100cm sheets -Stainless steel rack trolley stove trolley for Daub RDTO Heuft VTR -10 Etagig -for sheets 58x98cm and 60x100cm -2 pieces available in stock -External dimensions: 106.5 x 65cm and 192cm high -Internal width: 101,5x 60cm

Manufacturer: Pasilac Therm AS Denmark Type: N-35 Year: 1985/ 2022 Output: P624236 60 hl/h

Eppendorf Mastercycler ep Gradient S PCR/Thermalcycler 96 well-plates or tubes heatable lid Graphically programmable Ramp rate 6C/sec, cooling 4.5 C/sec Temperature range 30C to 99C, lid 37-110C Temperature constant +/- 0.2 C

pdf attached

In-store oven Quail Mini Thermic Plus 10 - Quail Mini Thermic Plus 10 hot air oven - Ovens 5+5 controllable - for 5 + 5 baking trays 60x40cm - Door stop on the right - elek. Power supply: 18.2 kW - with proofing cabinet - Control: Shopmatic 5 Plus Timer - 400 Volt AC /3Ph/N/PE/ 50Hz - Year of construction 10 / 2008

wire electrode, welding wire, welding wire -MAG wire electrode: started roll -Type: Thermanite D O 1.0 mm -Dimension: O 300 /100 mm -Weight reel: 10.7 kg

Plasma Cutter VCS 2000, HiPerformance Plasma HPR 260 XD and suction Filtercube 4H 7500 m³/h volume flow. To be visited in operation.

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Theleico: 42A 60-1 I 6 -Outer diameter: 200 mm -Width: 6 mm -Inside diameter: 40 mm -Price: per piece -Number: 19 pieces -Weight: 0.4 kg

20 Somet Thema E11 Year 1993-1994 360cm width 6 Harness Frames 1 IRO weft feeder 2 Beams (twin beam) 1 Cloth roll   10 Looms working and 10 looms are stopped Each loom can be tested before shipment.

Stock No. 2590k 1 used compounding pelletizing line, throughput up to 1200 kg/h depending on material, consisting of: 1x Grav. Dosing system 5-component SITECOM incl. control 1x Extruder twin screw THEYSOHN type TSK 90 Screws 2x Ø 90 mm – 36 LD synchronization Segment screw and barrel, water / medium cooled Screw speed up to 300 rpm-1 Extruder drive 255 kW-DC 1x side dosing extruder TSD 75 twin screw with drive 3 kW 3x degassing openings 1x melt filter No. 1 type K –HS- Y with sieve 176 mm, incl hydraulic 1x melt pump with drive 22 kW 1x meelt filter No.2 type K-SWE 180 RS back-flush self-cleaning incl. hydraulic 1x strand head with 32 x Ø3.5 mm holes 1x strand cooling pool 620 x 5000 mm 1x string granulator SG 300, drive 11 kW Screen control ResoTec / control cabinet Visit / demonstration at short notice by arrangement. Further compounding lines and access ...

GM 1207 thermal oil plant consisting of: 4 wagon ovens 1 central heating system with gas burner Total baking area: 48 sqm Manufacturer: MIwe Year of construction: 2002 Condition: very good dismantled in stock Pratteln Specifications: 4 trolley ovens for 2 baking trolleys each with 10 supports Baking area per oven: 12 sqm Central heating system: Gas, 350 Kw 18 baking trolleys with 10 pads for: Baking trays: 600 mm x 1000 mm Footprint per furnace: W 1600 mm x D 3100 mm x H > 3000 mm Side by side: W 8000 mm x D 3100 mm x H 3000 mm

Single screw Extruder Theysohn 63mm

Line for PVC profiles : 1.Extuder Single Theysohn AS 63mm PVC 2. Calibration table Greiner Genius Cal 2P/3.6 3. Theysohn REA32/1HJ-TECH belt lashing 4. saw Theysohn REA32/1HJ-TECH) price for all Line 31.000 Euro

refrigeration system with a fan Year of construction :1990 Power : 1,1kW Voltage : 220/380 V 50Hz Amperage : 6.6 /5.8 V For further information, please refer to the type plate

Refrigeration system with a fan Year of manufacture : 1993 Power : 3,2/2,0 kW Voltage : 380 V 50Hz Amperage : 6.4 / 3.7A Capacity : 41,5 dm³

Refrigerant recovery system, vacuum pump for air conditioners, air conditioners, refrigeration units, differential pressure gauge -For use in: air conditioning systems with recovery, CFC, HFC and HCFC -Dimensions: 300/400/H320 mm -Weight: 19kg

2 pieces Hohner head mounts (suspension) for Theisen & Bonitz Booklet Maker Price per 1 pc. Art.: PS3135

Type: KH-2580 Producer: Thermokey Serial numb.: R120398900 Created: 2012 Max pressure: 30bar mail adress.: zuzana.novotnanovotny-chlazeni.cz

Bitzer refrigerant compressors unit Type: HSK7461-80-40P (x3) Volume: 220 m3/h (x3) Cooling capacity for R404A: 560 kW at - 5°C/40°C, 477 kW at -10°C/40°C, 338 kW at -20°C/40°C Dimensions: 4500 x 1200 x 2300 mm Condenser Thermofin Type: X-TCH 100.1-25-B-N(D5/S5) Cooling capacity: 963/852 KW Air flow: 295 000 / 234 000 m3/h Number of fans: 10 x 1000 mm Dimensions: 9800 x 2300 x 1600 mm Volume: 229.3 L Weight: 1 929 kg Control panel Dimensions: 2400 x 600 x 2000 mm

Bitzer refrigerant compressors unit Type: HSK7471-90-40P (x3) Volume: 250 m3/h (x3) Cooling capacity for R404A: 531 kW at -5°C/40°C, 435 kW at -10°C/40°C, 280 kW at -20°C/40°C Dimensions: 4500 x 1200 x 2300 mm Condenser Thermofin Type: X-TCH 100.1-26-B-N(D5) Cooling capacity: 1103 / 997 KW Air flow: 354 000 / 281 000 m3/h Number of fans: 12 x 1000 mm Dimensions: 11 800 x 2300 x 1600 mm Volume: 276 L Weight: 2 400 kg Control panel Dimensions: 2400 x 600 x 2000 mm

• Stirring volume max. 200 l • Stirring speeds 100-1,000 rpm • Mounting plate 180 x 180 mm • Effective power 80 W • Max. Shaft torque 50 Ncm • Control unit Cimarec Telemodul 40 M (stirring start, stirring time, speed) • Mounted on a mobile stainless steel frame with inclined mounting plate with counter support (format part) for mounting a vessel with Ø 235 mm • Drive 230V/50-60Hz

Wire electrode, welding wire, welding wire, cored wire -Manufacturer: Böhler, started roll of protective gas wire electrode -Type: Thermanit 316 L-PW Ø 1.2 mm -Dimensions: Ø 200/55 mm -Weight roll: 4.0 kg

Wire electrode, welding wire, welding wire, cored wire -Manufacturer: Böhler, started roll of protective gas wire electrode -Type: Thermanit 316 L-PW Ø 1.2 mm -Dimensions: Ø 300/100 mm -Weight roll: 12.0 kg