the full tetra used for sale

0: 1200 °C internal diameter: 210 mm internal length of the oven: 1000 mm total power requirement: 25,2 kW weight of the machine ca.: 0,55 t dimensions of the machine ca.: BTH 1,3 x 1,6 x 1,8 m Hochtemperatur ROHROFFEN - Labor Split - Tube Furnace Kelltool Furnace GAS H2 und N2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thermo Scientific LTQ Orbitrap - Hybrid Ion Trap Mass Spectrometer LC/MSn in high resolution at an affordable price! Including: Ion Max ESI Source, HCD Collision Cell, backing pumps and Thermoflex 900 chiller. Fully tested with 3 months warranty. HPLC / UPLC / nanoLC available for an extra charge, installation in D/A/CH/NL possible.

Evaporator Thermofin Type: TEN071.1-D-2-7 Cooling capacity: 37.3 kW at DT8, 29.6 kW at DT7 Fin spinning: 7 mm Fans: 2 x 710 mm Dimensions: 3450 x 850 x 110 mm Volume: 52 L Weight: 380 kg Quantity in stock: 4 Reference number: CH 534 Condition: Used in good condition, evaporator 100% tight under nitrogen, fans working, ready to work Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Evaporator Thermofin Type: TEN071.1-F-2-7-HG Cooling capacity: 52.1 kW at DT8, 39.3 kW at DT7 Fin spinning: 7 mm Fans: 2 x 710 mm Dimensions: 3450 x 1000 x 1120 mm Volume: 86.66 L Weight: 460 kg Quantity in stock: 5 Reference number: CH 533 Condition: Used in good condition, evaporator 100% tight under nitrogen, fans working, ready to work Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Manufacturer: Thermacut Model: EX-TRACK CNC-PA OX Year of Manufacture: 2021 Type of Machine: Plasma cutter Max Travel Speed: 3000 mm/min Max Cutting Length: 3050 mm Max Cutting Width: 1525 mm Voltage: 110V/230V Current: 1A Find more here - / Contact us at -

Key data: 100 °C

Tool temperature control unit - HB-Therm HB-100Z1 Years of manufacture: 2013 and 2014 Description: Max. heating capacity - 100°C Heat transfer medium – water Heating capacity: 8 kW Cooling capacity: 30 kW Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended Price: On request

HB THERM 140 Z 2 (2010) Measurement range 0–400 °C Resolution 0.1 °C Regulation accuracy ±0.1 K Tolerance ±0.8 K Flow measurement Measuring range 0.4–40 l/min Resolution 0.1 l/min Regulation accuracy ±0.1 l/min Tolerance ±(5% of measured value + 0.1 L/min) Pressure measurement Value Unit Measuring range 0–20 bar Resolution 0.1 bar Tolerance ±5% of final value Technical data O8360-CS 2023-08 25 3.2 Emission value unit Permanent sound pressure level <70 dB(A) Surface temperature (back side of the device) >55 °C 3.3 Operating conditions Temperature range 5–40 °C Relative humidity 35–85 % RH Minimum free space (→ picture) A 10 mm B 50 mm C 150 mm D 50 mm E 70 mm

Key data: 250 °C, 8 kW

This temperature controller can heat up to 250 degrees with oil medium. It can also be used for injection molding tools, extruder screws, and metal processing machines. Everything works perfectly. Pump, heating, heat exchanger and control are good. I have 1 of these, but there are also other types of temperature controllers for lower temperatures and other machines in the plastics industry. Please see my other ads.

Stitcher-folder-trimmer unit Make Theisen & Bonitz Model TB Sprint 303 Year 1997 Maximum size 350 x 500 mm Details 2 Hohner 48-5 S stitching heads - folding - front trimming- belt delivery - on a rails Speed up to 3.100 cycles per hour Video Click here Available Direct

Description Control unit for molds: 76 zones Microcontroller: TH-SYNC output voltage: 230V temperature range: 0-400 ° C Without thermocouple cables and resistors

Description Flexo gearless printing machine 8 colors Max printing width 1260mm Max film width 1300mm Print repeat min/max 340/800mm Winder and unwinder for roll 3" Elecrtical drying Video control system 8 pumps

Description Gauging Scanner for thickness

Manufacturer: Thermo Model: HeraSafe KS Year of Manufacture: 2017 Find more here - / Contact us at -

The THERMOLIFT 100-2 from ARBURG offers the possibility of drying and feeding a wide range of plastics with just one system. The THERMOLIFT is easy to operate thanks to its compact, modular concept and small size. All programming steps can be integrated into the machine control system. With a capacity of 100 l, you can feed up to two machines. A suction system enables the automatic filling of your THERMOLIFT. Please also note our large selection of other used plastic processing machines. All our machines can be viewed on site via video and tested in person.

Key data: 100 °C, 8 kW, 30 W

HB-Therm HB-100Z1 temperature control unit with water medium for a maximum temperature of 100 °C. Heating 8 kW, cooling 30 kW, pump 1 kW, 60 l/min, 60 m. In good condition, ready for use. Please also note our large selection of other used plastic processing machines. All our machines can be viewed on site via video and tested in person.

Evaporator Thermofin -Type: TEN 050.1-E-2-7 -Cooling capacity: 18.6 kW at DT8, 14.7 kW at DT7 -Fin spinning: 7 mm -Fans: 2 x 500 mm -Dimensions: 2450 x 660 x 670 mm -Volume: 28.2 L -Weight: 134 kg -Quantity in stock: 6 -Reference number: CH 551 -Condition: Used in good condition, evaporator 100% tight under nitrogen, fans working, ready to work

A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available.

A foldable tube furnace from Thermconcept is available. Maximum temperature: 1100°C, heated length: 500mm, constant zone: 160mm, recommended tube diameter/length: 70mm/750mm, power: 3kW, dimensions X/Y/Z: 650mm/500mm/510mm. Documentation available.

AMUT - COMI FFG-760-ADV, Format area: mm. 750x550 (max. leaf width mm.900), Material: PET-PS-PP-PLA - XPS, Film thickness: mm. 0,2 - 2, Heaters: YES, Foil loading: automatic, Cycles/min: MAX AT EMPTY 60, ONE OWNER ONLY, Other details:, In production: yes, Can it be tested? yes, Availability to load it in a truck? Container?: price net of transport, machine loading and dismantling, Additional details:, 1.PRE-HEATING LEAF BLOWER ON SIDES FOR CHAINS, 2.ROBOT/MANIPULATOR AT END OF LINE WITH POSSIBILITY TO ROTATE FOR A/B TRAYS, 3.+ BASKET WITH BULKHEAD FOR CLASSIC EVACUATION, 4.LONG ROPE FOR EVAQUACING PRODUCTS, 5.CLOSING FORCE PRESS kN 300, 6.CLOSING FORCE CUTTING PRESS kN 600, 7.MAXIMUM LEAF WIDTH mm. 900, 8.MAXIMUM LEAF DIAMETER mm. 1200, 9.BOTH MACHINING OPERATIONS POSSIBLE (FORM AND DIE-CUT RESUMPTION / SIMULTANEOUS DIE-CUT FORM)

There is a recirculating air cooling system consisting of an Alfa Laval plate heat exchanger and a Thermofin finned tube heat exchanger. 1) Alfa Laval M10-BW plate heat exchanger, year of manufacture: 2005, cooling capacity: 115kW, flow rate: 28.2m³/h, refrigerant NH3. 2) Finned tube heat exchanger Thermofin TBN, year of manufacture: 2019. Including panel housing and condensate drip tray. Documentation available.

For high-performance applications with temperature-sensitive samples, with pre-cooling function, direct button and CFC-free cooling system. Temperature range: -10 to 40°C, connected load: 1950W, dimensions: 670x745x790mm, net weight: 142.5kg. Including 4x oval 1l bottles, 4x adapters for 15ml tubes, 4x white adapters and bottles, castors, rotor cross TX-1000 and set of 4 metal beakers TX-10000, with instructions for use and appliance test book, no maintenance or repairs, in good condition, little used. On-site inspection is possible.

Zusammentragmaschine / Broschürenfertigung Theisen & Bonitz TB Sprint 315 VP - TB Sprint 303 Booklet Maker / Brochure Finishing Theisen & Bonitz TB Sprint 315 VP - TB Sprint 303 Zusammentragmaschine / Gatherer TB Sprint 310 VP - 15 Stations Feeder Baujahr / Year 1992 Format / Size min. 65 x 100mm Format / Size max. 350 x 500mm Broschürenfertigung / Booklet Maker TB Sprint 303 Baujahr / Year 1992 Heften-Falzen-Schneiden / Stitching-Folding-Trimmer Unit 2 Universalheftköpfen / 2 Stitching heads Hohner 48/5S Kompressor / Compressor Becker Auslage / Delivery

Immersion Cooler, Two-Stage Cooling suitable for Mettler Toledo DSC8822eCooling Unit, Water Cooler, Chiller, Laboratory Cooler, Cooler, Immersion CoolerTHERMO HAAKE Type EK90 / MTTyp No. 003-4403Ser. Nr. 1200001655/004Year of construction: 2000Working temperature range -90 ... + 40 CCothing: 300 W (at 20 C)Coolant R23 + R404ASsmoke length: 2000 mmImmersion sleeve d x L: 18 x 70 mm (suitable for Mettler Toledo DSC822e)Mains connection: 230 volts, 50 HzPower consumption: approx. 1 kW- cooling circuit with 2

Incubator Manufacturer: Thermo Scientific Forma Steri-Cycle Model 371 Year of construction 2014 Very good condition The Thermo Scientific Type 371 CO2 Incubator is ideal for sensitive incubation applications and ensures optimal cell growth. This CO2 incubator can be used in bio tissue engineering, in vitro fertilization (IVF) clinics, and academic hospitals, among others. Specifications Voltage: 230V, 50/60Hz Current: 4.4A Temperature range: + 5 °C above ambient temperature up to 50 °C CO2 range: 0 – 20% Capacity: 184 L External dimensions (W) x (D) x (H): 66 x 64 x 98 cm Inner dimensions (W) x (D) x (H): 47 x 47 x 65 cm

Key data: 160 °C

Description 1pc 800.--2 pieces 1.500.-- +VAT.HB Therm HB 160U1 max-160°C 8 KW ,year 2000 from resolution plastic production of medical device manufacturer ,operating instructions in the device in special compartment R1329 and R1330our identification no. Display protected by fold-away film Viewing by e-mail appointment is desirable Sale only to traders and under the following conditions The machine is considered to have been taken over when it leaves the company, subsequent complaints cannot be taken into account So no guarantee and return.We do not assume any liability for compliance with all requirements mentioned in the UVV (accident prevention regulations)

LBBC Autoclave Internal dimensions 1000mmx1500mm Type: Quicklock Thermoclave Heat rating 30kW 6 Vacuum bags Heating ramp 5°C/min, 218psig, 220 Kgs combined materials, Year 2001 Complete with material trolley, associated piping, control panel

A package of twelve dyeing machines is available: 1) 2x Then AFT 225 dyeing machines, 2) Then AFS 50 dyeing machine, 3) Then AFE 50 dyeing machine, 4) 4x Then AFS 225 dyeing machines, 5) Fongs HST 130/32 dyeing machine, 6) Then DN 200 dyeing machine, 7) 2x Then OFHT 170 dyeing machines. An on-site inspection is possible.

2 identical water-to-water heat pumps. Manufacturer: Thermo-Tec Type: TT-CHP W/W 170.2-S Heating capacity: 207 kW Refrigerant: R290 - Propane Year: 2024 Can be operated with groundwater/well water or via geothermal probes. Heat pumps can only heat. Commissioning: September 2024 Decommissioning: May 2025 In the meantime, it has been professionally dismantled, stored and immediately available. Subject to prior sale - errors possible Internal reference number: E-1208

Flame and plasma cutting machine Bach Thermocut BJ 2008

Supply air system Al-ko, Alko Therm AT4 41x32 Bj. 2016 2 pieces For sale now. Fully functional.

Reference Num.: 4278 Brand: Theisen Bonitz Type: tb sprint B318 VP + 304 QSM Construction year: 2008 Available: directly Status: In production Location: Deutschland

Offer 25375 Specifications: - Working range / cutting length for approx. 5 m raceway approx. 3000 mm - Working range / cutting width approx. 1500 mm - Control BACH - Track gauge approx. 1900 mm - 1 plasma burner with height adjustment - Plasma source KJELLBERG Hi FOCUS 160 i - Cutting current at 100% ED 10 - 160 A - Cutting range steel approx. 5 - 50 mm - Cutting range aluminium approx. 5 - 35 mm - Cutting range stainless steel approx. 5 - 30 mm - Connection 400 V / 35 kVA - Extraction table with extraction system make TEKA, type Filtercube 4 H, built in 2010 - Weight approx. 4 T - Space requirement system approx. L 7.5 x H 1.5 x D 2.4 m - Space requirement for extraction approx. L 1.5 x H 3.5 x D 1.5 m

THERMO FISHER MICROCENTRIFUGE, Tubes : 24 , Elec: 230 V / 50 Hz, timer: 1 to 99 minutes , Max speed: 13 000, Temperature range: -9 to +40°C , Refrigerant: R-134a

used wagon furnace system with 2 x wagon furnace Heuft Vulkan Thermo-Roll VTR 10.19,0.09 and 1 x boiler Heuft HK 200, Fabr.-Nr. 13 C 582, with 3 trolleys 60 x 100 cm per oven, 9 shelves per trolley/oven, shelves each 18.5 cm high, with br. Weishaupt oil burner, external dimensions per oven: 170 cm wide, 325 cm deep, 260 cm high, outer dimensions kettle: 105 cm wide, 170 cm deep, 200 cm high, in baker's condition, ran perfectly until the end

THERMO FISHER microcentrifuge., Tubes: 24, Elec: 230 V/50 Hz, timer: 1 to 99 minutes, Max speed: 13 000, Temperature range: -9 to +40°C

Thermo Scientific Incubator, Internal dimensions (mm): 505x440 H 665, Number of shelves: 3, Maximum temperature (°C): 55°C , Sterilization temperature cycle (°C): 180°C , CO2 control: ± 0.1% , O2 control: ± 0.1% , Humidity: RH: >_93% @ 37°C

Thermo Scientific incubator. Sold with 1 filter and a water reservoir cover., Dimensions (mm): 875x640 H 1145, Internal dimensions (mm): 505x440 h 665, Number of shelves: 2, Maximum temperature (°C): 55°C, Sterilization temperature cycle (°C): 180 , CO2 control : ± 0.1%, O2 control: ± 0.1%, Humidity: RH: >_93% @ 37°C

Gathering Machine Theisen & Bonitz Model TB Sprint B 318 VP Stitching and Folding Machine Year of 2008 18 Stations Max. format 35 x 50 Variable stacking of VP up to 30 cm Standard Equipment: Siemens Control System Automatic Start and Stop Stapling, Folding, 3-Sided Trim

Equipment: Spacious interior with stainless steel shelves and doors for optimal sample organization Strong insulation for constant temperature even in the event of a power failure Digital control element with temperature display RS232 interface for external monitoring and data acquisition Robust castors for easy transport Condition: Used, functional With slight signs of wear (see pictures) Interior clean and fully equipped

Specifications: Model: Thermo Electron TPF 340 SV Temperature range: down to -40 °C Mains operation: 230 V, 3.5 A, 50 Hz, 0.8 kW Refrigerant: R404a, 0.7 kg Protection class: IP 20 Equipment: Robust design for professional use Digital temperature control with display Several sturdy stainless steel drawers in the interior for efficient storage Lock to secure the contents Ideal for samples, reagents, sensitive materials or food Condition: Used, in working condition With slight signs of wear (see pictures) Interior clean, stainless steel drawers available

General SKU293X398 LocationBarneveld MakeThermo Scientific TypeHy Performa Year of construction2003 Main Features MaterialStainless steel/Polypropylene Volume250 Ltr. Specified Features - Stainless Steel Reactor MaterialStainless steel Stainless Steel Reactors Reactorcheck Capacity250 + 50 l. With jacketcheck Open stirring vesselcheck Capacity250 + 50 l. Information CEcheck With switchgearcheck Extra SpecificationsWith Thermo Scientific bioreactor, volume 250 l., (2003), 2x single use bioreactors, volume 50 l., (2001), : control system, : Mettler Toledo floor scale, load cap. 600 kg, e=0,2 kg, : disposable bags, 200 and 50 l. spare parts, 13x plastic mix drums with 5x mobile frames, : Lauda, temperature unit, type T1200, : Pall, manual filter press, type Stax, (2013) Quantities of single-use bags: 650l total 6 pieces 350l total 29 pieces 200l total 23 pieces 50l ...

A complete Soitaab waterjet cutting system, which until the year 2023 was only a demonstration machine, is available. 1) Main system Soitaab Thesis 2040, year of manufacture: 2014, cutting dimensions X/Y/Z: 4000mm/2000mm/200mm, control system: Soitaab 905unoS, control system year of manufacture: 2023, overall system dimensions X/Y/Z: approx. 5400mm/3300mm/2100mm. 2) High pressure pump KMT Neo 50, year of manufacture: 2022, max. operating pressure: 4100bar, last service: 09/2025. 3) Abrasive unit KMT Feedline V, year of manufacture: 2015. Including a storage container Müller, container capacity: 1000kg. Documentation available. An on site inspection is possible.

Year of manufacture: 2008, permissible operating pressure: 21 bar Empty weight: 4,900 kg With frame and handrail with walkway rust removal

Offer 20244 Granulate dryers Technical data approx.: - Filling quantity approx. 250 L - Granulate feed via suction device - Heating capacity 10 kW - Total drive power 10.5 kW -Thermostat - Compressed air connection 6 - 8 bar - Mobile version - Space requirements W 850 x H 2350 x D 950 mm - Weight approx. 180 kg

Theisen & Bonitz TB Flex B314HP Collator with finisher Max. size 350 x 500 mm 14 automatic stations Pile height. 65 cm Finisher. TB Flex 303 QSM stitch+fold+trim with 2 Hohner stitching heads Jogger. yes, zig-zag jogger Speed up to 3.300 cycles per hour in 1:1 modus and 4.200 in 1:2 modus

Manufacturer: ThermoFisher Model: OptiFIB Taipan G2+ Year of Manufacture: 2019 Type of Machine : DualBeam Focused Ion Beam – Scanning Electron Microscope (FIB-SEM) Condition: Used . Excellent working and physical condition, professionally inspected Included Items: 1. Main DualBeam FIB-SEM column and stage 2. Control console and computer with new SSD installed, fully processed and ready for operation 3. De Chemistry and DX Chemistry units as pictured 4. Complete set of basic technical documentation Advantages of This Unit: Premium Source – Originates from Intel fabrication environment Modern Platform – G2+ generation offers enhanced resolution and stability for advanced nanofabrication and 3D analysis Plug-and-Play Ready – Serviced and fitted with critical new components Ideal For: Semiconductor failure analysis, materials science research, nano-prototyping, life sci ...

Laminator LAM-120 - automatic thermo laminating machine year 2015 sheet size 120 x 160 cm paper weight 110-600 g/m2 Weight 2.500 kg lift for film rolls in production good condition

For Sale: Variovac Primus – Year of Manufacture 2015, more photos will follow soon, currently being serviced., We offer a well-maintained Variovac Primus thermoforming packaging machine, manufactured in 2015, designed for reliable and efficient food packaging applications. This machine is widely used in the food industry for vacuum and MAP packaging of fresh and processed products., Key Features, - Thermoforming packaging machine, - Suitable for vacuum and Modified Atmosphere Packaging (MAP), - Robust industrial design for continuous production, - Hygienic construction, ideal for food processing environments, - User-friendly control system, - Proven Variovac quality and reliability, Applications, - Meat and poultry, - Cheese and dairy products, - Fish and seafood, - Ready meals and convenience foods, - Other food and non-food products requiring high-quality packaging, Condition, - Year ...

Year of manufacture 2005 Stitching, folding and cutting unit 304 QSM 3-side trim Shed display Marking device Delivery date: immediately Price on request. Worldwide delivery & installation.

A two-station crimping and blocking machine Theo Leibrock is available. Stations: 2, processed materials: leather/leather composites/upper materials/thin plastics, machine dimensions X/Y/Z: approx. 1000mm/1000mm/1750mm, weight: approx. 400kg. Documentation available. On-site inspection is possible.