the boiler can used for sale

max. exposition size: 70 x 90 cm exposing power: 2,5 kW weight: 189 kg serial no.: 89110195 voltage: 220 V current: 11 A dispersion foil automatic drawer cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Standard

Thermotec PX06/H35CX Chiller 64.5 kW Manufacturer: Thermotec NV Model: PX-06 Series: 06C... B01 Year: 2006 Refrigerant: R407C Tank volume: 950 liters Current 3x380/415V 50 Hz Power: 64.5 kW 118 Amp. IP54 More refrigeration systems new and used - you can find them in our shop! International shipping costs on request!

Used Thermal Oil Ovens DAUB - 2 ThermoRoll trolley ovens for trolleys 60x80cm - 1 deck oven thermal oil - incl. boiler More information on request. Ask us for dismantling and assembly including commissioning.

Pester PEWO-pack 450 stretchwrapper for folding cartons, etc., including PEWO-therm shrink tunnel and PEWO-collect packing table, carton infeed with turning device and stacker, film splicing unit, format range cartons min. 30 x 30 x 60 mm (LxWxH), max. 100 x 100 x 250 mm (LxWxH), format range collation/bundle min. 30 x 30 x 60 mm (LxWxH), max. 300 x 380 x 250 mm (LxWxH), capacity up to 50 bundles per minute, electrics 3x400V+N+PE/50Hz, power consumption 13.1 kW, operating pressure 5 bar, infeed height 840 +/-10 mm, outfeed height approx. 800-950 mm, machine floor space approx. 4000 x 2513 mm (LxW), machine height approx. 2100 mm

- Convection oven from Wachtel with clipboard, proofer and exhaust hood - Convection oven is Thermico Plus with IQ Air control - Oven is for 5 trays 60x40cm - Proofer is for 16 trays 60x40cm -Electrical. Connected load: 13.7 kW - Year of construction: 11 / 2017 Dimensions: - 97cm wide - 85cm deep - 205cm tall

Key data: 3000 KW, 400 V

Thermofin TDD.2-091 V-cooler, dry-cooler, dry cooler, glycol cooler., as good as new only one year in operation, super quiet, high efficient, 22fans, 13.7 x 2.4x 2.7 h, 7150kg, from 500KW to 3500KW,

1 Tilting Casting Furnace Mfc.: Thermcon Built: 2002 Type: 25 T Natural gas 7560 kcal/Nm³ Main burner: 1.9 MW Sec. Burner 0.6 MW

Make: THERMOKEY Type: WH2390BND/02VQRAFS Year of Make: 2019 Volume: 160 liters Pressure: 10 bar Max. temperature: +95 °C Min. temperature: -40 °C Fan: Ø 900mm with 8 fans AKAD 900-6-6 A2 incl. speed control via SELPRO frequency converter and temperature sensor (from 0%-100%) incl. wiring up to the control cabinet 2 pcs. available Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Make: THERMOKEY Type: GH249CXD/02VQRAFS Year of Make: 2019 Volume: 349 liters Pressure: 10 bar Max. temperature: +95 °C Min. temperature: -40 °C Fan: Ø 900mm with 8 fans AKAD 900-6-6 A2 incl. speed control via SELPRO frequency converter and temperature sensor (from 0%-100%) incl. wiring up to the control cabinet 2 pcs. available Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Theisen & Bonitz tb sprint 310 VP, machine number 310 VP 2784, year of construction 2001, 10 stations, format min. 65 x 100 mm - max. 350 x 500 mm, flat pile feeder, stacking height 30 cm, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

ZIMMER THERMOCURE TEXTILE FABRIC CURING MACHINE / EDGER High Capacity Hot Air Dryer MAKE : ZIMMER TYPE : THERMOCURE UHD 3 YOC : 2005 WW : 2000 mm CONTENT : 240 m HEATING : HOT OIL GAS FIRED WITH THERMAL OIL BOILER TEMPR : MAX. 250 C

1 large evaporative condenser plant, manufacturer Thermofin GmbH Prod. No. 703543-010-001; Type: TACD=90-1-29-N B%. Year of manufacture 2008 permissible Operating pressure 21 bar Curb weight 4,500 kg with frame and walk-through platform all around standing on the roof, with frame for sale In very good maintained condition, immediately available

Heat exchanger thermal works 4 pcs. in different Sizes Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Dry cooler, 827litres volume, 22pcs EC Fan's super silence,from 700KW to 5000KW cooling capacity, 13,7m x 2,4m x2,7m h, 7150Kg, like new year 2022,

Code: 0409 Brand: THEOREMA Model: BR 3000 SPECIAL - CE Standard CNC boring and pantograph working centre with 3 controlled axis for furniture, kitchens, bathroom furniture, panels, doors and miscellaneous - CE standard Technical data: Minimum overall dimensions Useful length X axis mm 3000 Useful length Y axis mm 1300 X axis speed mt/min 24 Y axis speed mt/min 24 Z axis stroke mm 65 Max panel thickness mm 65 Boring unit with n° 18 spindles - Right-left drill chuck diameter mm 10 - Rpm 4000 Pantograph with pneumatic tool release - Motor Hp 7,5 - Rpm 0/18000 - Inverter for spindle Kw 5,5 Nesting worktable Suction cups mm 150 x 150 Rapid panel positioning Optimisation of the drilling path Specularity of drilling and milling cycles Interpolation on three X-Y-Z axis Vacuum pump cubic metres 100 Compressed air atm 6 Overall dimensions: mm 4400 x 1700 x 2400 h Weigh ...

Belichter / Exposer Serial-No. 96010095 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Collator tb sprint B 312 VP 12 Station variable pile up to 30 cm formats: max. 35 x 65 cm, min. 6.5 x 10 cm paper weights: 20 to 1000 g/m² speed: up to 3300 cycles/h current: standard 400 V, 50 Hz, 3/N/PE additional equipment: • single sucker- and -blower valves, individually adjustable • controlled blast and separating air • missed sheet detector, photo electric, each station • double sheet detector electromechanical at the delivery • paper jam detector over transport table • lighting of transport table • hand feeding station right • delivery jogger for normal- and criss-cross-delivery, selectable by switch • total- and preselection batch counter • SPS programme control with - Touch Screen - missed sheet repeat without machine stop with the next cycle - ejector, faulty sets are separated while running, max. set thickness 4 mm - programmable, au ...

1996 Theissen and Bonnitz TB 314 QSM 65 Collating machine Hersteller (Manufacturer): Theisen & Bonitz GmbH, Burscheid, Germany Masch.-Typ (Machine Type): TB 314 QSM 65 Baujahr (Year of Manufacture): 1998 U (Voltage): 3~PE 400 V, 50 Hz P (Power): 1.9 kW Find more here - / Contact us at -

0: 1200 °C internal diameter: 210 mm internal length of the oven: 1000 mm total power requirement: 25,2 kW weight of the machine ca.: 0,55 t dimensions of the machine ca.: BTH 1,3 x 1,6 x 1,8 m Hochtemperatur ROHROFFEN - Labor Split - Tube Furnace Kelltool Furnace GAS H2 und N2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Model: VXC Nitro 2450 Typ 523 Year of Manufacture: January 2014 Voltage: 3 x 230/400V, 50 Hz Power Consumption: 45 kW Nitrogen Consumption: 25 m³/h Exhaust Capacity: 2 x 200 m³/h Manufacturer: Rehm Thermal Systems Find more here - / Contact us at -

Thermo Scientific LTQ Orbitrap - Hybrid Ion Trap Mass Spectrometer LC/MSn in high resolution at an affordable price! Including: Ion Max ESI Source, HCD Collision Cell, backing pumps and Thermoflex 900 chiller. Fully tested with 3 months warranty. HPLC / UPLC / nanoLC available for an extra charge, installation in D/A/CH/NL possible.

Evaporator Thermofin Type: TEN071.1-D-2-7 Cooling capacity: 37.3 kW at DT8, 29.6 kW at DT7 Fin spinning: 7 mm Fans: 2 x 710 mm Dimensions: 3450 x 850 x 110 mm Volume: 52 L Weight: 380 kg Quantity in stock: 4 Reference number: CH 534 Condition: Used in good condition, evaporator 100% tight under nitrogen, fans working, ready to work Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Evaporator Thermofin Type: TEN071.1-F-2-7-HG Cooling capacity: 52.1 kW at DT8, 39.3 kW at DT7 Fin spinning: 7 mm Fans: 2 x 710 mm Dimensions: 3450 x 1000 x 1120 mm Volume: 86.66 L Weight: 460 kg Quantity in stock: 5 Reference number: CH 533 Condition: Used in good condition, evaporator 100% tight under nitrogen, fans working, ready to work Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Manufacturer: Thermacut Model: EX-TRACK CNC-PA OX Year of Manufacture: 2021 Type of Machine: Plasma cutter Max Travel Speed: 3000 mm/min Max Cutting Length: 3050 mm Max Cutting Width: 1525 mm Voltage: 110V/230V Current: 1A Find more here - / Contact us at -

Key data: 100 °C

Tool temperature control unit - HB-Therm HB-100Z1 Years of manufacture: 2013 and 2014 Description: Max. heating capacity - 100°C Heat transfer medium – water Heating capacity: 8 kW Cooling capacity: 30 kW Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended Price: On request

HB THERM 140 Z 2 (2010) Measurement range 0–400 °C Resolution 0.1 °C Regulation accuracy ±0.1 K Tolerance ±0.8 K Flow measurement Measuring range 0.4–40 l/min Resolution 0.1 l/min Regulation accuracy ±0.1 l/min Tolerance ±(5% of measured value + 0.1 L/min) Pressure measurement Value Unit Measuring range 0–20 bar Resolution 0.1 bar Tolerance ±5% of final value Technical data O8360-CS 2023-08 25 3.2 Emission value unit Permanent sound pressure level <70 dB(A) Surface temperature (back side of the device) >55 °C 3.3 Operating conditions Temperature range 5–40 °C Relative humidity 35–85 % RH Minimum free space (→ picture) A 10 mm B 50 mm C 150 mm D 50 mm E 70 mm

Key data: 250 °C, 8 kW

This temperature controller can heat up to 250 degrees with oil medium. It can also be used for injection molding tools, extruder screws, and metal processing machines. Everything works perfectly. Pump, heating, heat exchanger and control are good. I have 1 of these, but there are also other types of temperature controllers for lower temperatures and other machines in the plastics industry. Please see my other ads.

Stitcher-folder-trimmer unit Make Theisen & Bonitz Model TB Sprint 303 Year 1997 Maximum size 350 x 500 mm Details 2 Hohner 48-5 S stitching heads - folding - front trimming- belt delivery - on a rails Speed up to 3.100 cycles per hour Video Click here Available Direct

Description Control unit for molds: 76 zones Microcontroller: TH-SYNC output voltage: 230V temperature range: 0-400 ° C Without thermocouple cables and resistors

Description Flexo gearless printing machine 8 colors Max printing width 1260mm Max film width 1300mm Print repeat min/max 340/800mm Winder and unwinder for roll 3" Elecrtical drying Video control system 8 pumps

Description Gauging Scanner for thickness

Manufacturer: Thermo Model: HeraSafe KS Year of Manufacture: 2017 Find more here - / Contact us at -

The THERMOLIFT 100-2 from ARBURG offers the possibility of drying and feeding a wide range of plastics with just one system. The THERMOLIFT is easy to operate thanks to its compact, modular concept and small size. All programming steps can be integrated into the machine control system. With a capacity of 100 l, you can feed up to two machines. A suction system enables the automatic filling of your THERMOLIFT. Please also note our large selection of other used plastic processing machines. All our machines can be viewed on site via video and tested in person.

Key data: 100 °C, 8 kW, 30 W

HB-Therm HB-100Z1 temperature control unit with water medium for a maximum temperature of 100 °C. Heating 8 kW, cooling 30 kW, pump 1 kW, 60 l/min, 60 m. In good condition, ready for use. Please also note our large selection of other used plastic processing machines. All our machines can be viewed on site via video and tested in person.

Evaporator Thermofin -Type: TEN 050.1-E-2-7 -Cooling capacity: 18.6 kW at DT8, 14.7 kW at DT7 -Fin spinning: 7 mm -Fans: 2 x 500 mm -Dimensions: 2450 x 660 x 670 mm -Volume: 28.2 L -Weight: 134 kg -Quantity in stock: 6 -Reference number: CH 551 -Condition: Used in good condition, evaporator 100% tight under nitrogen, fans working, ready to work

A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available.

A foldable tube furnace from Thermconcept is available. Maximum temperature: 1100°C, heated length: 500mm, constant zone: 160mm, recommended tube diameter/length: 70mm/750mm, power: 3kW, dimensions X/Y/Z: 650mm/500mm/510mm. Documentation available.

AMUT - COMI FFG-760-ADV, Format area: mm. 750x550 (max. leaf width mm.900), Material: PET-PS-PP-PLA - XPS, Film thickness: mm. 0,2 - 2, Heaters: YES, Foil loading: automatic, Cycles/min: MAX AT EMPTY 60, ONE OWNER ONLY, Other details:, In production: yes, Can it be tested? yes, Availability to load it in a truck? Container?: price net of transport, machine loading and dismantling, Additional details:, 1.PRE-HEATING LEAF BLOWER ON SIDES FOR CHAINS, 2.ROBOT/MANIPULATOR AT END OF LINE WITH POSSIBILITY TO ROTATE FOR A/B TRAYS, 3.+ BASKET WITH BULKHEAD FOR CLASSIC EVACUATION, 4.LONG ROPE FOR EVAQUACING PRODUCTS, 5.CLOSING FORCE PRESS kN 300, 6.CLOSING FORCE CUTTING PRESS kN 600, 7.MAXIMUM LEAF WIDTH mm. 900, 8.MAXIMUM LEAF DIAMETER mm. 1200, 9.BOTH MACHINING OPERATIONS POSSIBLE (FORM AND DIE-CUT RESUMPTION / SIMULTANEOUS DIE-CUT FORM)

There is a recirculating air cooling system consisting of an Alfa Laval plate heat exchanger and a Thermofin finned tube heat exchanger. 1) Alfa Laval M10-BW plate heat exchanger, year of manufacture: 2005, cooling capacity: 115kW, flow rate: 28.2m³/h, refrigerant NH3. 2) Finned tube heat exchanger Thermofin TBN, year of manufacture: 2019. Including panel housing and condensate drip tray. Documentation available.

For high-performance applications with temperature-sensitive samples, with pre-cooling function, direct button and CFC-free cooling system. Temperature range: -10 to 40°C, connected load: 1950W, dimensions: 670x745x790mm, net weight: 142.5kg. Including 4x oval 1l bottles, 4x adapters for 15ml tubes, 4x white adapters and bottles, castors, rotor cross TX-1000 and set of 4 metal beakers TX-10000, with instructions for use and appliance test book, no maintenance or repairs, in good condition, little used. On-site inspection is possible.

Zusammentragmaschine / Broschürenfertigung Theisen & Bonitz TB Sprint 315 VP - TB Sprint 303 Booklet Maker / Brochure Finishing Theisen & Bonitz TB Sprint 315 VP - TB Sprint 303 Zusammentragmaschine / Gatherer TB Sprint 310 VP - 15 Stations Feeder Baujahr / Year 1992 Format / Size min. 65 x 100mm Format / Size max. 350 x 500mm Broschürenfertigung / Booklet Maker TB Sprint 303 Baujahr / Year 1992 Heften-Falzen-Schneiden / Stitching-Folding-Trimmer Unit 2 Universalheftköpfen / 2 Stitching heads Hohner 48/5S Kompressor / Compressor Becker Auslage / Delivery

A package of twelve dyeing machines is available: 1) 2x Then AFT 225 dyeing machines, 2) Then AFS 50 dyeing machine, 3) Then AFE 50 dyeing machine, 4) 4x Then AFS 225 dyeing machines, 5) Fongs HST 130/32 dyeing machine, 6) Then DN 200 dyeing machine, 7) 2x Then OFHT 170 dyeing machines. An on-site inspection is possible.

Immersion Cooler, Two-Stage Cooling suitable for Mettler Toledo DSC8822eCooling Unit, Water Cooler, Chiller, Laboratory Cooler, Cooler, Immersion CoolerTHERMO HAAKE Type EK90 / MTTyp No. 003-4403Ser. Nr. 1200001655/004Year of construction: 2000Working temperature range -90 ... + 40 CCothing: 300 W (at 20 C)Coolant R23 + R404ASsmoke length: 2000 mmImmersion sleeve d x L: 18 x 70 mm (suitable for Mettler Toledo DSC822e)Mains connection: 230 volts, 50 HzPower consumption: approx. 1 kW- cooling circuit with 2

Incubator Manufacturer: Thermo Scientific Forma Steri-Cycle Model 371 Year of construction 2014 Very good condition The Thermo Scientific Type 371 CO2 Incubator is ideal for sensitive incubation applications and ensures optimal cell growth. This CO2 incubator can be used in bio tissue engineering, in vitro fertilization (IVF) clinics, and academic hospitals, among others. Specifications Voltage: 230V, 50/60Hz Current: 4.4A Temperature range: + 5 °C above ambient temperature up to 50 °C CO2 range: 0 – 20% Capacity: 184 L External dimensions (W) x (D) x (H): 66 x 64 x 98 cm Inner dimensions (W) x (D) x (H): 47 x 47 x 65 cm

Key data: 160 °C

Description 1pc 800.--2 pieces 1.500.-- +VAT.HB Therm HB 160U1 max-160°C 8 KW ,year 2000 from resolution plastic production of medical device manufacturer ,operating instructions in the device in special compartment R1329 and R1330our identification no. Display protected by fold-away film Viewing by e-mail appointment is desirable Sale only to traders and under the following conditions The machine is considered to have been taken over when it leaves the company, subsequent complaints cannot be taken into account So no guarantee and return.We do not assume any liability for compliance with all requirements mentioned in the UVV (accident prevention regulations)

LBBC Autoclave Internal dimensions 1000mmx1500mm Type: Quicklock Thermoclave Heat rating 30kW 6 Vacuum bags Heating ramp 5°C/min, 218psig, 220 Kgs combined materials, Year 2001 Complete with material trolley, associated piping, control panel

2 identical water-to-water heat pumps. Manufacturer: Thermo-Tec Type: TT-CHP W/W 170.2-S Heating capacity: 207 kW Refrigerant: R290 - Propane Year: 2024 Can be operated with groundwater/well water or via geothermal probes. Heat pumps can only heat. Commissioning: September 2024 Decommissioning: May 2025 In the meantime, it has been professionally dismantled, stored and immediately available. Subject to prior sale - errors possible Internal reference number: E-1208

Flame and plasma cutting machine Bach Thermocut BJ 2008

Supply air system Al-ko, Alko Therm AT4 41x32 Bj. 2016 2 pieces For sale now. Fully functional.