th used for sale

Heckert ZFWVG 250 x 2000 Thread Milling and Spline Hobbing Machine. Max. workpiece diameter 250 mm Workpiece diameter over bed 500 mm Center height over bed 260 mm Threading/hobbing length 2000 mm Min/Max. module 2/18 Workpiece spindle bore 102 mm Bore of the collets 100 mm Tailstock quill stroke 100 mm Speed 45 – 560 rpm Lead of leadscrew 1,2 '' links / left mm Workpiece turning speeds 0,0032-2,65 U/min Rolling feed 0,027-5,66 mm/WU Longitudinal hob feeds 0,3-198 mm/min Main drive 4 kW Feed motor 25 NM Coolant pump 0,09 kW Lubrication pump 0,37 kW Total power requirement 9,5 kW Dimensions 3700x2400x1600 mm Total weight 5200 kg Accessories; -heavy duty head -standard head -steady rest -flange -change gears full set

HECKERT ZFWVG 250 x 1250 Thread Milling and Spline Hobbing Machine Max. workpiece diameter 250 mm Workpiece diameter over bed 500 mm Center height over bed 260 mm Threading/hobbing length 1250 mm Min/Max. module 2/18 Workpiece spindle bore 102 mm Bore of the collets 100 mm Tailstock quill stroke 100 mm Speed 45 – 560 rpm Lead of leadscrew 1,2 '' links / left mm Workpiece turning speeds 0,0032-2,65 U/min Rolling feed 0,027-5,66 mm/WU Longitudinal hob feeds 0,3-198 mm/min Main drive 4 kW Feed motor 25 NM Coolant pump 0,09 kW Lubrication pump 0,37 kW Total power requirement 9,5 kW Weight of the machine ca. 3,40 t Accessories; -heavy duty head -standard head -steady rest -change gears set -centers and arbors -spindle spare -counter weight Will be re-paint in original brown colour.

Two identical thermoforming machines DIXIE-UNION DV 2000 are available. Supply voltage: 380V, frequency: 50Hz, rated current: 20A, version with red CEE three-phase plug (3~). Machine 1 was still in operation until 2025. Machine 2 has not been in use for a longer period and is not complete, as relays were removed for spare parts. An on-site inspection is possible, not under power.

Thermostat housing incl. thermostats and entire interior Mitsubishi No.: 37546-23701

Compressor with built-in air dryer Power: 25 kW Pressure: 8 bar

Compressor with built-in air dryer Power: 25 kW Pressure: 8 bar

Dimensions (L/W/H): 1200x1100x1160 mm Weight: 950 kg Total power requirement: 8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 780 mm y-travel: 560 mm z-travel: 560 mm total power requirement: --- kW weight of the machine ca.: 12,0 t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle taper: 2 x SK 40 forward bearing diameter: 110 mm milling head speed: 100 - 4500 U/min milling drive: 5,1 kW workpiece length - max.: 830 mm workpiece dia. with double equipment: max. 135 mm taper diameter: 78 g6 mm centre height: 260 mm turning speed range - stepless: max. 15 U/min distance of spindles: 135 mm spindle nose: DIN 55026 Gr. 5 : : stroke of workpiece slide: 810 mm Feed speed: max. 6 m/min. surface area: 200 x 1750 mm : tool post (Z-axis): stroke of tool slide: 120 mm Feed speed: max. 2 m/min. column movement: 200 mm : tail stock: tailstock quill stroke: 100 mm morse taper: 3 MK centre height: 260 mm axial distance of the quills: 135 mm passage of steadyrest: 40 - 80 mm control: SIEMENS SINUMERIK 810 weight of the machine ca.: 6,5 t with SIEMENS-control SINUMERIK 810/820 acc.: NC-dividing unit with back stop, various toolholders, steadies, running centres, coo ...

A four-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible.

Control: SINUMERIK 840 D rolling power: 800 kn diameter max.: Werkstück: 250 mm work piece width: 80 mm spindle diameter: 110 mm : 100-700 1/min power capacity: 110 kW length: 2600 mm width: 2600 mm height: 2600 mm weight: 12,5 t Mandrel diameter: 45–100 mmScope of deliveryCentral lubrication, stepless speed control, proportional measuring system, linear mandrel guide, process monitoring for the mandrel, process data management, rolling equipment, distributor 130–190 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ORT RP12, 2-roll, 12 ton, Thread rolling machine, The machine is in our warehouse, under power

Code: 0240 Brand: KUPER Model: FW /J 900 Veneer thread splicer Technical data : Throat depth mm 900 Feed speed mt 15/min Thickness of veneer 0,4 - 2 mm Motor 0,18 Kw Overall dimensions: mm 1350 x 580 x 1600 h Weight kg 300

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -Width: 1250mm -Length: 1595mm - Height: 47mm - Holes: M16 grid 50 x 50 mm -Drilling: 22 mm grid 450 x 400 mm -Plate: without straight edge -Number: 1 piece available -Weight: 700kg

Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat -Manufacturer: Danfoss, unused thermostat in original packaging -Type: RT7 -Temperature range: -25 to 15 °C -Price: per piece -Number: 3 piece -Dimensions package: 275/130/H80 mm -Weight: 1 kg/piece

Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, thermal expansion valve -Manufacturer: Alco, thermal expansion valve, unused in original packaging -Type: TIE-MW 55/PCN 802456 -Price per piece -Number: 2 piece -Dimension package: 105/80/H70 mm -Weight: 0.4 kg/piece

Theodolite tripod, theodolite stand, measuring frame, stand, assembly stand, steel stand, welding table, assembly table, support stands, support feet, work stand, saw roller stand, saw roller stand, sawhorse, roller conveyor stand -can be moved sideways -Height adjustable: 1040-1380 mm -Number: 7x tripods available -Price per piece -Transport dimensions: 610/750 / H1040 mm -Weight: 120 kg / piece

End mill, milling cutter, shank thread milling cutter, thread cutter -Manufacturer: JAL PWS P, 29 pieces shank thread milling cutters -Hole: Ø 27 mm 25 pieces, Ø 32 mm 4 pieces -Various types: see photos -Sizes: see photo parts list -Price/Sale: complete -Dimensions: 240/180/H150 mm -Total weight: 4.2 kg

Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve -Manufacturer: Alco, thermo-valve upper part unused in original packaging -Type: XB 1019 MW55-1B/PCN 803379 -Operating range: +10 to -30 °C -Price: per piece -Number: 7 piece -Dimensions package: 120/120/H160 mm -Weight: 0.7 kg/piece

Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat -Manufacturer: Danfoss, unused thermostat in original packaging -Type: RT14L -Temperature range: -5 to 30 °C -Dimensions package: 275/130/H75 mm -Weight: 1 kg

Frequency converter, frequency inverter, drive converter, controller, variable speed drive, thermal system -Manufacturer: Laird, Thermal Systems Thermoelectric Peltier Module -Voltage: 24 VDC -Cooling capacity: 71 W -Quantity: 2 pieces -Price: per piece -Dimensions: 230/145/H120 mm -Weight: 2.4 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive, thermal system -Manufacturer: Laird, Thermal Systems Thermoelectric Peltier module -Voltage: 24 VDC/3.4 A -Cooling power: 71 W. -Price: per piece -Number: 15 piece -Dimensions: 230/120/H150 mm -Weight 2.4 kg/piece

Drill bit, twist drill bit, drill bit, for drilling rig, drilling center -Quantity: 53x NC twist drills with tightening thread -Diameter: 8x Ø32mm 9x Ø34mm 8x Ø36mm 6x Ø38mm 1x Ø39mm 8x Ø40mm 7x Ø41mm 6x Ø42mm -Intake: MK4 -Type: HSS -according to pictures - Sale: only complete -Weight: 84kg

Three-phase synchronous motor, geared motor, electric motor, servo motor -Manufacturer: Baumüller, Servomotor three-phase synchronous motor -Type: DSOG 100-K -Speed: 3000 rpm -Power: 11 kW -Transmission: SEW type R82 LP90 i= 10.22 -Speed: 1400 / 137 rpm -External fan: W2S130-AB03-10 -Shaft: Ø 50 x 100 mm -Design: B3 -Brake -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Dimensions: 1050/285/H345 mm -Weight: 116 kg

Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Manufacturer: Würth, Stud bolt M10 x 200 50 pieces/carton -Type: Type 2 SW 7 -Material: Stainless steel A2-70 -Quantity: 13 boxes available -Price: per carton -Cardboard dimensions: 220/220/H90 mm -Weight: 6.2 kg/carton

Pressure reducing valve, condensate drain, valve, check valve, control valve, Thermovit regulator, condensate drain regulator -Manufacturer: Gestra, Thermovit regulator for condensate drain regulator UBK 46 Ovp -Type: ET.TH.-Controller UBK46 -Material number: 375324 -Quantity: 14 pieces available -Price per piece -Carton dimensions: 75/70/H55 mm -Weight: 0.1 kg/piece

Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine -Manufacturer: EWM, flat jaw thread rolling machine knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable -Knurling plate: RAA 1.0 -Central lubrication: -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg

Temperature controller, temperature sensor, temperature setting, temperature converter, temperature limiter, electronic temperature controller, temperature switch, thermostat -Manufacturer: Danfoss, thermostat temperature switch, unused, original packaging -Type: RT 107 17-1566 -Temperature range: 70 to 150 °C -Quantity: 4 thermostats available -Price: per piece -Package dimensions: 280/130/H75 mm -Weight: 1.2 kg/pc.

Temperature Controller, Temperature Sensor, Temperature Setting, Temperature Converter, Temperature Limiter, Electronic Temperature Controller, Temperature Switch, Thermostat, Sensor, -Manufacturer: Trafag, thermostat temperature switch unused original packaging -Type: 471 2331 342 27 8319 0065 90 -Temperature range: 20 to 150 °C -Cable length: 3000mm -Number: 2 thermostats available -Price per piece -Dimensions package: 245/130/H80 mm -Weight: 1.1 kg/pc.

Temperature controller, temperature sensor, temperature converter, temperature monitor, thermostat, flue gas thermostat, room temperature controller, capillary thermostat, industrial room thermostat -Manufacturer: Alre, room temperature controller, unused, original packaging -Type: WR-81.042-1 -Temperature range: -10 to 40 °C -Quantity: 2 thermostats available Price: per piece -Cardboard dimensions: 310/140/H90 mm -Weight: 1.0 kg

PTC relays, contactors, semiconductor contactors, relays, isolation amplifiers, converters, threshold switches -Manufacturer: Phoenix Contact, Threshold switch, unused, original packaging -Type: MCR-SWS/I Order No.: 27 66 47 8 -Quantity: 1x relay available Price: per piece -Cardboard dimensions: 115/110/H30 mm -Weight: 0.2 kg/pc.

thermal switch, circuit breaker, electric circuit breaker, thermal switch, temperature switch, thermostat controller -Manufacturer: AEG, thermal switch thermostat controller unused original packaging -Type: EGO II K 662 980 599 -Voltage: 16(4)A/380V -Number: 2x controller available -Price per piece -Dimensions cardboard: 140/85/H40 mm -Weight: 0.1 kg/pc.

End Mill, Milling Cutter, Shank Thread Mill, Thread Cutter, Threading Tool, Indexable Thread Mill -Manufacturer: Ingersoll, indexable insert thread milling cutter M40 x 4.5 unused original packaging -Type: SR 0040 L30-2 -Art. No.: 3026150 12Y1SO40070W6R00 -Intake: Ø 32 mm -Dimensions: Ø40 x 130 mm -Weight: 0.7 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting attachment, thread cutting quick change chuck -Manufacturer: Bilz/Gewefa thread cutting quick-change chuck MK2 -Intake: Type Bilz WFLK 115 MK 2 -Type: Gewefa 05.056.104 M4xØ4.5xØ3.4 -Type: Bilz WES 1 BK 4.5x3.4 M 4 -Type: Bilz WES 1 B 3.5x2.7 M 5 -Total dimensions: 140/35/H120 mm -Weight: 0.7 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting attachment, thread cutting quick change chuck -Manufacturer: Bilz/Gewefa, thread cutting quick-change chuck MK3 -Intake: Type Bilz WFLK 115 MK 3 -Type: Gewefa 05.056.104 M4xØ4.5xØ3.4 -Type: Bilz WES 1 B 8x6.2 M 8 -Type: Bilz WES 1 B KP 6x4.9 M 8 -Total dimensions: 140/36/H140 mm -Weight: 0.9 kg

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, PTC thermistor release device -Manufacturer: Ziehl, PTC relay, PTC release device, unused, original packaging -Type: MSF 220 K -Item No.: T 221715 -Quantity: 1 piece available -Cardboard dimensions: 120/80/H25 mm -Weight: 0.2 kg

Temperature controller, temperature sensor, temperature setting, temperature converter, temperature limiter, electronic temperature controller, temperature switch, thermostat -Manufacturer: Danfoss, thermostat temperature switch unused in original packaging -Type: KP 77 060L1121 -Temperature range: 20 to 60°C -Quantity: 1 thermostat available -Dimensions box: 140/130/H50 mm -Weight: 0.5 kg

Temperature controller, temperature sensor, temperature setting, temperature converter, temperature limiter, electronic temperature controller, temperature switch, thermostat -Manufacturer: Fanal, thermostat temperature switch, unused, original packaging -Type: TBFR 112 spec. -Temperature range: 18 to 55 °C -Cardboard dimensions: 220/120/H50 mm -Weight: 0.5 kg

Ball valve, ball valve internal thread, metal ball valve -Manufacturer: GEMÜ, 2/2-way metal ball valve stainless steel, unused in original packaging -Type: B20 25D 137 SL Item No.: 88613078 -Size: DN25 1 -Pressure: PN63 63 bar -Hand lever: lockable -Quantity: 6x ball valve available -Price per piece -Dimensions of box: 195/120/H60 mm -Weight: 0.9 kg/pc.

Ball valve, ball valve internal thread, metal ball valve -Manufacturer: GEMÜ, 2/2-way metal ball valve stainless steel, unused in original packaging -Type: B20 20D 137 SL Item No.: 88613077 -Size: DN20 3/4 -Pressure: PN63 63 bar -Hand lever: lockable -Quantity: 7 pieces available -Price per piece -Dimensions of cardboard: 180/100/H50 mm -Weight: 0.6 kg/pc.

Thread cutting head, thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW, self-opening thread cutting heads type A2 13 pieces -Size: M16 x 1.75 recording MK3 2 pieces -Size: M10 x 1.5 1 piece -Size: Ø 17 mm 10 pieces -Price/tax: complete -Transport dimensions: 400/250/H270 mm -Weight: 22 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: ABW, Thread cutting chuck MK3 mount -Type: GB3a -Cutting capacity: M12 -M24 -Bore: Ø 33 mm -Number: 2x cutting chucks available -Price: per piece -Dimensions: Ø 80 x 257 mm -Weight: 3.7 kg/pc.

Thread cutting head, thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: Pittler, self-opening thread cutting heads 2 pieces -Type: Model A No 3d L485 -Size: M7 x 1.25 1 piece -Size: Ø 24 mm recording MK4 1 piece -Price/tax: complete -Transport dimensions: 180/140/H310 mm -Weight: 8.5 kg

Thread cutting head, thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: DL, self-opening thread cutting heads 4 pieces -Type: Model A4 -Size: M18 x 1.75 1 piece -Size: M15 x 2 1 piece -Size: Ø 30 mm 2 pieces -Shaft: Ø 40 mm -Price/tax: complete -Transport dimensions: 230/230/H180 mm -Weight: 20 kg

Tapping chuck, thread chuck, tapping chuck, thread cutting attachment -Manufacturer: WMW, thread cutting device type GSA 1 -Recording: MK1 / B12 -Reversing gear: Quick return integrated -Clamping diameter: max 6 mm -Thread cutting sizes: M2-M4 -Number: 2x thread cutting chucks available -Price: per piece -Dimensions: 125/100/60 mm -Weight: 0.7 kg

Thread cutting head with chaser jaws, pipe thread cutter, thread cutting stock, hand thread cutting stock, thread cutting stock, cutting stock set, ratchet thread cutting stock -Manufacturer: LUX, Hand Thread Cutting Stock Set 541 424 -Cutting stocks: R1/2, R3/4, R1, R1 1/4, 1 ratchet lever -Transport case -Dimensions case: 360/340/H100 mm -Weight: 5.4 kg

thermal exhaust air combustion system, exhaust gas filter system, exhaust gas filter system, exhaust gas filter, hot filter, industrial exhaust gas filter -Thermal exhaust air combustion plant: Manufacturer LTG Type 20000 Nm³/h -Protocols: regarding maintenance and emissions are available Documentation: complete -Combustion chamber temperature: 850° C -Heating fuel: Natural gas -Calorific value: 10 kWh/m³ -Connected load: 45 kW -Exhaust air volume: 20,000 Nm³/h -Max. solvent quantity: 1.5 g/m³ -Individual components: see photos

Thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: Pittler, self-opening thread cutting head -Type: Model A 3 L 1018/20 -Cutting jaws: not included -Bore: Ø 31/24 mm -Hole: Ø 40 mm -Dimensions: 130/125/H170 mm -Weight: 3.6 kg