th used for sale

Three-phase synchronous motor, geared motor, electric motor, servo motor -Manufacturer: Baumüller, Servomotor three-phase synchronous motor -Type: DSOG 100-K -Speed: 3000 rpm -Power: 11 kW -Transmission: SEW type R82 LP90 i= 10.22 -Speed: 1400 / 137 rpm -External fan: W2S130-AB03-10 -Shaft: Ø 50 x 100 mm -Design: B3 -Brake -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Dimensions: 1050/285/H345 mm -Weight: 116 kg

Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Manufacturer: Würth, Stud bolt M10 x 200 50 pieces/carton -Type: Type 2 SW 7 -Material: Stainless steel A2-70 -Quantity: 13 boxes available -Price: per carton -Cardboard dimensions: 220/220/H90 mm -Weight: 6.2 kg/carton

Pressure reducing valve, condensate drain, valve, check valve, control valve, Thermovit regulator, condensate drain regulator -Manufacturer: Gestra, Thermovit regulator for condensate drain regulator UBK 46 Ovp -Type: ET.TH.-Controller UBK46 -Material number: 375324 -Quantity: 14 pieces available -Price per piece -Carton dimensions: 75/70/H55 mm -Weight: 0.1 kg/piece

Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine -Manufacturer: EWM, flat jaw thread rolling machine knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable -Knurling plate: RAA 1.0 -Central lubrication: -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg

Temperature controller, temperature sensor, temperature setting, temperature converter, temperature limiter, electronic temperature controller, temperature switch, thermostat -Manufacturer: Danfoss, thermostat temperature switch, unused, original packaging -Type: RT 107 17-1566 -Temperature range: 70 to 150 °C -Quantity: 4 thermostats available -Price: per piece -Package dimensions: 280/130/H75 mm -Weight: 1.2 kg/pc.

Temperature Controller, Temperature Sensor, Temperature Setting, Temperature Converter, Temperature Limiter, Electronic Temperature Controller, Temperature Switch, Thermostat, Sensor, -Manufacturer: Trafag, thermostat temperature switch unused original packaging -Type: 471 2331 342 27 8319 0065 90 -Temperature range: 20 to 150 °C -Cable length: 3000mm -Number: 2 thermostats available -Price per piece -Dimensions package: 245/130/H80 mm -Weight: 1.1 kg/pc.

Temperature controller, temperature sensor, temperature converter, temperature monitor, thermostat, flue gas thermostat, room temperature controller, capillary thermostat, industrial room thermostat -Manufacturer: Alre, room temperature controller, unused, original packaging -Type: WR-81.042-1 -Temperature range: -10 to 40 °C -Quantity: 2 thermostats available Price: per piece -Cardboard dimensions: 310/140/H90 mm -Weight: 1.0 kg

PTC relays, contactors, semiconductor contactors, relays, isolation amplifiers, converters, threshold switches -Manufacturer: Phoenix Contact, Threshold switch, unused, original packaging -Type: MCR-SWS/I Order No.: 27 66 47 8 -Quantity: 1x relay available Price: per piece -Cardboard dimensions: 115/110/H30 mm -Weight: 0.2 kg/pc.

thermal switch, circuit breaker, electric circuit breaker, thermal switch, temperature switch, thermostat controller -Manufacturer: AEG, thermal switch thermostat controller unused original packaging -Type: EGO II K 662 980 599 -Voltage: 16(4)A/380V -Number: 2x controller available -Price per piece -Dimensions cardboard: 140/85/H40 mm -Weight: 0.1 kg/pc.

End Mill, Milling Cutter, Shank Thread Mill, Thread Cutter, Threading Tool, Indexable Thread Mill -Manufacturer: Ingersoll, indexable insert thread milling cutter M40 x 4.5 unused original packaging -Type: SR 0040 L30-2 -Art. No.: 3026150 12Y1SO40070W6R00 -Intake: Ø 32 mm -Dimensions: Ø40 x 130 mm -Weight: 0.7 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting attachment, thread cutting quick change chuck -Manufacturer: Bilz/Gewefa thread cutting quick-change chuck MK2 -Intake: Type Bilz WFLK 115 MK 2 -Type: Gewefa 05.056.104 M4xØ4.5xØ3.4 -Type: Bilz WES 1 BK 4.5x3.4 M 4 -Type: Bilz WES 1 B 3.5x2.7 M 5 -Total dimensions: 140/35/H120 mm -Weight: 0.7 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting attachment, thread cutting quick change chuck -Manufacturer: Bilz/Gewefa, thread cutting quick-change chuck MK3 -Intake: Type Bilz WFLK 115 MK 3 -Type: Gewefa 05.056.104 M4xØ4.5xØ3.4 -Type: Bilz WES 1 B 8x6.2 M 8 -Type: Bilz WES 1 B KP 6x4.9 M 8 -Total dimensions: 140/36/H140 mm -Weight: 0.9 kg

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, PTC thermistor release device -Manufacturer: Ziehl, PTC relay, PTC release device, unused, original packaging -Type: MSF 220 K -Item No.: T 221715 -Quantity: 1 piece available -Cardboard dimensions: 120/80/H25 mm -Weight: 0.2 kg

Temperature controller, temperature sensor, temperature setting, temperature converter, temperature limiter, electronic temperature controller, temperature switch, thermostat -Manufacturer: Danfoss, thermostat temperature switch unused in original packaging -Type: KP 77 060L1121 -Temperature range: 20 to 60°C -Quantity: 1 thermostat available -Dimensions box: 140/130/H50 mm -Weight: 0.5 kg

Temperature controller, temperature sensor, temperature setting, temperature converter, temperature limiter, electronic temperature controller, temperature switch, thermostat -Manufacturer: Fanal, thermostat temperature switch, unused, original packaging -Type: TBFR 112 spec. -Temperature range: 18 to 55 °C -Cardboard dimensions: 220/120/H50 mm -Weight: 0.5 kg

Temperature controller, temperature sensor, temperature setting, temperature converter, temperature limiter, electronic temperature controller, temperature switch, thermostat, sensor, pressure and temperature switch -Manufacturer: Amot, pressure and temperature switch unused -Type: 4140DKIE00CE4-EE -Temperature range: 83-104°C Setting 85°C -Number: 2x thermostat available -Price: per piece -Dimensions: 200/70/H80 mm -Weight: 0.6 kg/piece

Ball valve, ball valve internal thread, metal ball valve -Manufacturer: GEMÜ, 2/2-way metal ball valve stainless steel, unused in original packaging -Type: B20 25D 137 SL Item No.: 88613078 -Size: DN25 1 -Pressure: PN63 63 bar -Hand lever: lockable -Quantity: 6x ball valve available -Price per piece -Dimensions of box: 195/120/H60 mm -Weight: 0.9 kg/pc.

Ball valve, ball valve internal thread, metal ball valve -Manufacturer: GEMÜ, 2/2-way metal ball valve stainless steel, unused in original packaging -Type: B20 20D 137 SL Item No.: 88613077 -Size: DN20 3/4 -Pressure: PN63 63 bar -Hand lever: lockable -Quantity: 7 pieces available -Price per piece -Dimensions of cardboard: 180/100/H50 mm -Weight: 0.6 kg/pc.

Thread cutting head, thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW, self-opening thread cutting heads type A2 13 pieces -Size: M16 x 1.75 recording MK3 2 pieces -Size: M10 x 1.5 1 piece -Size: Ø 17 mm 10 pieces -Price/tax: complete -Transport dimensions: 400/250/H270 mm -Weight: 22 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: ABW, Thread cutting chuck MK3 mount -Type: GB3a -Cutting capacity: M12 -M24 -Bore: Ø 33 mm -Number: 2x cutting chucks available -Price: per piece -Dimensions: Ø 80 x 257 mm -Weight: 3.7 kg/pc.

Thread cutting head, thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: Pittler, self-opening thread cutting heads 2 pieces -Type: Model A No 3d L485 -Size: M7 x 1.25 1 piece -Size: Ø 24 mm recording MK4 1 piece -Price/tax: complete -Transport dimensions: 180/140/H310 mm -Weight: 8.5 kg

Thread cutting head, thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: DL, self-opening thread cutting heads 4 pieces -Type: Model A4 -Size: M18 x 1.75 1 piece -Size: M15 x 2 1 piece -Size: Ø 30 mm 2 pieces -Shaft: Ø 40 mm -Price/tax: complete -Transport dimensions: 230/230/H180 mm -Weight: 20 kg

Tapping chuck, thread chuck, tapping chuck, thread cutting attachment -Manufacturer: WMW, thread cutting device type GSA 1 -Recording: MK1 / B12 -Reversing gear: Quick return integrated -Clamping diameter: max 6 mm -Thread cutting sizes: M2-M4 -Number: 2x thread cutting chucks available -Price: per piece -Dimensions: 125/100/60 mm -Weight: 0.7 kg

Thread cutting head with chaser jaws, pipe thread cutter, thread cutting stock, hand thread cutting stock, thread cutting stock, cutting stock set, ratchet thread cutting stock -Manufacturer: LUX, Hand Thread Cutting Stock Set 541 424 -Cutting stocks: R1/2, R3/4, R1, R1 1/4, 1 ratchet lever -Transport case -Dimensions case: 360/340/H100 mm -Weight: 5.4 kg

thermal exhaust air combustion system, exhaust gas filter system, exhaust gas filter system, exhaust gas filter, hot filter, industrial exhaust gas filter -Thermal exhaust air combustion plant: Manufacturer LTG Type 20000 Nm³/h -Protocols: regarding maintenance and emissions are available Documentation: complete -Combustion chamber temperature: 850° C -Heating fuel: Natural gas -Calorific value: 10 kWh/m³ -Connected load: 45 kW -Exhaust air volume: 20,000 Nm³/h -Max. solvent quantity: 1.5 g/m³ -Individual components: see photos

Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head, thread cutting chuck -Manufacturer: Efem, thread cutting head thread cutter four-jaw chuck type G3 -Cutting jaws: not included -Bore: Ø 27 mm -Hole: Ø 40 mm -Dimensions: 160/130/H175 mm -Weight: 3.8 kg

Thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: Pittler, self-opening thread cutting head -Type: Model A 3 L 1018/20 -Cutting jaws: not included -Bore: Ø 31/24 mm -Hole: Ø 40 mm -Dimensions: 130/125/H170 mm -Weight: 3.6 kg

Electronically controlled unwinding unit, thread unwinder, yarn winder, thread winder, reel, -Manufacturer: Texmer, Electronically controlled unwinding unit -Type: EGA 2000 EGA-2000-31001271 -Spool weight: max. 40 kg -Quantity: 12x spooling units available, 1x shaft without attachment Price: per piece -Dimensions: 545/255/200 mm -Weight: 13.8 kg/pc.

Thread cutting machine, pipe thread cutter -Manufacturer: Rothenberger, Thread cutting machine type Supertronic 2SE without thread cutting head -Pipe size: 1/2 to 2 inches -Spindle bore: Ø 68 mm -Operating voltage: 230 volts -Speed: 40 rpm -Foot switch: with emergency stop function -Equipment: Pipe cutter, internal deburrer -Dimensions: 500/480/H370 mm -Weight: 46.6 kg

Threading machine, bench drill, pillar drill -Manufacturer: Hagen & Göbel, HG 6 type tapping machine with solid base -Clamping table: 350 x 290 mm -Travel distance: 310 mm -Spindle mount: Ø 12 mm -Projection: 235 mm -Speeds: 710/1120/1800/2800 rpm -Column: Diameter 85 mm -Spindle stroke: 35 mm -Motor: 0.37 kW Accessories: incl. machine vice, see photos -Dimensions: 685/490/H1340 mm -Weight: 212 kg

Forehead thermometer with disinfectant dispenser, disinfectant dispenser, infrared forehead thermometer, thermometer, disinfection column, disinfectant dispenser -Disinfection column: with contactless infrared thermometer for fever measurement -Disinfectant dispenser: with lever operation and drip tray -Number: 2x columns available -Price: per piece -Dimensions: Ø 490 x 1615 mm -Weight: 36 kg/pc.

Three-phase synchronous motor, geared motor, electric motor -Three-phase synchronous motor: Baumüller type DSOG 71-S -Transmission: SEW-Eurodrive type KA46 LP90 -Speed: 3000 rpm -Power: 6.8 kW -Brake -External fan -Design: Hollow shaft -Shaft diameter: Ø 35 mm -Brake -Protection class: IP 54 -Weight: 50 kg -Number: 4x motors available Price: per piece

Three-phase synchronous motor, geared motor, electric motor -Three-phase synchronous motor: Baumüller type DSOG 100-M -Transmission: SEW-Eurodrive type KA86 LP112 -Speed: 3000 rpm -Power: 22 kW -Brake -External fan -Design: Hollow shaft -Shaft diameter: Ø 65 mm -Brake -Protection class: IP 54 -Number: 4x motors available Price: per piece -Dimensions: 1150/300/H400 mm -Weight: 180 kg

Three-phase synchronous motor, geared motor, electric motor -Three-phase synchronous motor: Baumüller type DSOG 100-S -Transmission: SEW-Eurodrive type -Speed: 3000 rpm -Power: 18 kW -Brake -External fan -Design: Hollow shaft -Shaft diameter: Ø 70 mm -Brake -Protection class: IP 54 -Number: 3x motors available Price: per piece -Weight: 150 kg

Three-phase synchronous motor, geared motor, electric motor -Three-phase synchronous motor: Baumüller type DSOG 100-K -Transmission: SEW-Eurodrive type KA86 LP112 -Speed: 3000 rpm -Power: 11 kW -Brake -External fan -Design: Hollow shaft -Shaft diameter: Ø 70 mm -Brake -Protection class: IP 54 -Weight: 150 kg

Three-phase synchronous motor, geared motor, electric motor -Three-phase synchronous motor: Baumüller type DSG 56-S -Gearbox: Nord SK. 02053F-IEC 80 -Speed: 6000 rpm -Power: 2.9 kW -Brake -Speedometer -Shaft diameter: Ø 25 mm -Brake -Protection class: IP 54 -Dimensions: 630/250/H190 mm -Weight: 35 kg

Temperature controller, temperature sensor, temperature setting, temperature converter, temperature limiter, electronic temperature controller, temperature switch, thermostat, sensor -Manufacturer: Trafag, thermostat temperature switch, unused, original packaging -Type: 471 2331 342 14 -Temperature range: 20 to 150 °C -Quantity: 25 thermostats available -Price: per piece -Package dimensions: 80/115/H180 mm -Weight: 1.1 kg/pc.

Manufacturer: Italpress, Type: Mark C 18-30, Year: 1994, Durchlauffunierpresse: yes, Dimensions of heating plate approx. mm: 3000 X 1800, Number of storeys: yes, Charging side: längs, Landing opening mm: 200, Steel heating plates: 210 oben/unten 120, Min-max temperature: 145, Heated by: Dampf, Working temperature: 150, Overall pressure kN: 200 bar, Return cylinder N/cm2: yes, Number of pressing cylinders: 8 /Durchmesser 300 mm, Stages: 1, Press length mm: 2800, Pressing width mm: 1700, Transport roller conveyor: Einlaufrollenbahn, Longitudinal through running press: yes, Outlet conveyor: yes, Electrically heated kW: yes, Year :1994

KNAPP AD 410 Profi T -used-WIGO planing shaft, planed cast iron tables, joint opening dressing tables, table opening to the rear, stepless feed---------- Technical data ----------planing width: 410 mm, table length: 1,700 mm, number of knives: 3 pieces, swivel range dressing stop: 45 Â, passage height: 230 mm, feed speed: 6-12 m/min., extraction nozzle: 120 mm, motor power: 4 kW, weight: 460 kgQuality info: - dressing tables adjusted- pull-in and pull-out rollers checked

Key data: 13 KW, 1175 1/min

- Motor as shown in pictures - Technical data according to nameplate - Unused, mint condition

including label size 100x50 mm; 110x170 mm; in 10 different boxes including opened boxes; without pallet; Auction-ID: A1-43992-220

Manufacturer: Durr Type: LTB RK 15 Type of Machine : Regenerative Thermal Oxidiser (RTO) Year of Manufacture: 2018 Complete internal rebuild: 2024 and 2025 Technical Specifications - Total Capacity: 15,720 Am3/h (2 x 7,860 Am3/h) - Flow Rate (Nm3/h): 12,622 - Inlet Temperature: 67 degrees C - Inlet Pressure: -5 hPa g - Humidity: 8 g/kg - VOC Concentration: 0 to 5,000 mg/Nm3 - VOC Composition: Ethanol and Ethyl Acetate - Heating Value: 26,800 kJ/kg - Particulate Matter at inlet: less than 3 mg/Nm3 - Si Compounds: 0 mg/Nm3 - Other Pollutants: 0 mg/Nm3 2024 and 2025 Internal Rebuild - Work Completed - New diamond stainless steel mesh installed - Dividing walls fully rebuilt - Fire bricks re-installed throughout - All cans fitted with new media blocks - New insulation modifications completed Find more here - / Contact us at -

including size 60x360 mm; 40x360 mm; without pallet; Auction-ID: A1-43992-226

a total of 16 boxes; including size 110x360 mm; 40x360 mm; without pallet; Auction-ID: A1-43992-224

ORT RP30 C thread rolling machine 2-roll 30 tons electronic control of pressure (Ton), speed and position. Brushless motors for the rotation of the rollers Possibility to memorize the parameters for the piece., The machine is visible working in our warehouse in Gussago BS. Test possibility Mimu Machine Tools Rolling is a mechanical processing without chip removal that can be performed cold or hot, having as an aim the improvement of the surface finish (therefore the apathetic behavior of the material., Power (Ton): 30, Number of rollers: 2, PLC: YES

Berger / BRUNVOLL / ZF Thruster new unused

NEW ENGINE BOW THRUSTER MOTOR HYUNDAI NEW,

Fliegl TDK 140 – tandem three-way tipper (new machine built in 2025) General data • Engine type: three-way tipper • Manufacturer: Fliegl Agrartechnik GmbH • Model: TDK 140 • Year of construction: 2025 • Type: Tandem • Permissible Total weight: approx. 12,000 kg • Condition: New machine Technical equipment • Three-way tilt function • Tandem landing gear for high stability • Robust steel bridge • High side walls with attachment • Swinging tailgate • Hydraulic tipping system • Air brake system • Tyres: 15.0/70-18 • Lighting system and warning signs Condition • Visual condition: as good as new • Technical condition: perfect • Ready to use Stable and versatile three-way tipper – ideal for agricultural transport work and high payloads. Contact Now Kristina Kreimer – Surplex / TBAuctions k.kreimer@tbauctions. ...

Pühringer 3818 – Three-way tipper 7 t (new machine) General data • Engine type: three-way tipper • Manufacturer: Pühringer • Model: 3818 • Year of construction: 2024 • Permissible Total weight: 7,000 kg • Net weight: approx. 1,340 kg • Payload: approx. 5,660 kg • Condition: New machine Technical equipment • V-frame made of torsion-free C-profile (210 / 75 / 6 mm) • Axle cross-section: 70 mm, track width: 1,500 mm • Brake system RFA, brake 300 × 80 • Inner bridge length: 3,780 mm • Bridge width inside: 1,750 mm • Overall length: 5,450 mm, total width: 1,910 mm • Platform height: approx. 1,030 mm • Steel bridge sheet 4 mm, folded from one piece • Base side wall 500 mm height • Swing wall at the rear with central locking • Grain pusher with lever operation • Removable corner posts at the rear, front side wall removabl ...

Eppendorf Mastercycler Ep Gradient s Realplex 2 Thermal Cycler Thermal cycler model 5345 + 6300 EPgradient S Weight: 20 kg Voltage: 220V Dimensions 60×30×50 cm Without software