th used for sale

Thread Repair Kit BÖLLHOFF HeliCoil M22 Dimensions: 265 x 230 x 50 mm

Thread Repair Set BÖLLHOFF HeliCoil M24 Dimensions: 265 x 230 x 50 mm

Thrust Roller Bearings, Thrust Deep Groove Ball Bearings SKF 591/800M P5 Inner Diameter: Ø 800 mm Outer Diameter: Ø 950 mm Height: 90 mm New ! Dimensions : 1000 x 1000 x 100 mm

Holder for tapping head WMW Z39 Outer diameter: 180 mm Inner diameter: 45 mm Dimensions: 180 x 180 x 125 mm  

Tapping Machine WMW, ABW GB2 MK 2 M3 - M8 with inserts Ø 2.5 / 3.5 / 4.0 / 4.5 / 5.5 / 6.0 mm used, tested ! Dimensions: 250 x 95 x 65 mm

Tapping Device, Tapping Head GEFRIEBA MK3 for taps with square from 4 to 20 mm in wooden box used, tested ! Dimensions: 345 x 135 x 135 mm

Throughfeed Drilling Machine Weeke PKA3 Workpiece length up to 3000mm 6 x 2 drilling units vertical / from below 2 x 2 drilling units horizontal / from left and right side

Calender consisting of: (Version: 2024-02) Manufacturer: Eduard Küsters Maschinenfabrik_Krefeld Thermobonding calender, type 413.50 YOC: 1985 Nominal width: 3700 mm Fabric width: 3500 mm / conversion to 3200 mm Total force: 555 kN Line force: 150 N/mm Production speed: 10-150 m/min Roller Equipment: 1 Küsters floating roller (S-roller) 1 Raculan 1 steel roller Non-binding information from the manufacturer. Technical documentation and electrical documents available Special feature: Heat exchanger included in scope of delivery. Electric heater no longer active, therefore conversion to heating via external thermal oil system (not included). Sale: as seen, without further warranty Condition: ready for use Find more here - / Contact us at -

Specifications: Working length: 3050 mm Max. bending power: 30.0 mm Max. bending capacity length 1500 mm: 42 mm Bend: 25.0 mm Diameter upper roller: 460 mm Diameter lower roller: 460 mm Number of driven rollers: 3 hydraulic snap roller bearing Engine power: 37 kW Dimensions (length x width x height): approx. 5850 x 2550 x 2650 mm Weight: approx. 30 tons Note: Compact design, therefore low space requirement Parts of the hydraulics installed under the machine

Specifications: Working length: 2550 mm Max. bending power: 6.0 mm Bend : 4.0 mm Diameter upper roller: 176 mm Diameter lower roller: 176 mm Control panel with digital display Motor power: 7.5 kW CE mark Dimensions (length x width x height): approx. 4000 x 1400 x 1500 mm Weight: approx. 3.6 tons Note: the machine was used exclusively for straightening coated aluminum sheets Rollers were wrapped in foil, which was removed without leaving any residue Condition of the rollers almost as good as new few operating hours

Specifications: Working width: 1050 mm Max. bending power: 100.0 mm Max. bend: 80.0 mm Diameter upper roller: 530 mm Diameter of side rollers: 530 mm Conical bending device by inclined position of the two side rollers Mobile control panel with digital display Engine power: 37 kW Hydraulic Safety Chucks CE mark Net weight: approx. 16 tons Auxiliary: 2. Roller set : Diameter upper roller: 360 mm Diameter of side rollers: 360 mm

miscellaneous Different holders with Recordings

Specifications: Working length: 4100 mm Max. bending power: 10.0 mm Bend: 8.0 mm Diameter upper roller: 310 mm Diameter of lower rollers: 285 mm Hardened rollers hydraulic snap roller bearing Conical bending device Control panel with digital display CE mark Dimensions (length x width x height)): approx. 5100 x 1250 x 1400 mm Weight: approx. 6.2 tons Condition: very good, almost mint condition The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Marelli AC Generator MX 400 SC/4 AC synchronous generator from 1991 with unknown operating hours, 1 available. 400 volts/50 Hz, 825 KVA. Manufacturer: Marelli Model: MX 400 SC/4 Type: AC Synchronous Generator Serial Number: ML-3700 Power [KVA]: 825 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 1,190 Speed [1/min]: 1,500 Year of Make: 1991 Weight [kg]: 1.795

(printing, laminating, punching) Equipment / Additional information: Car inspection stickers were last produced

Hydraulic Tapping Machine with Capacity M3 to M20 (M24) -Without table -Projection approx. : 1800mm -With digital depth control

Height 1600 mm Width 1200 mm Length 2400 mm Weight 610 kg Power supply: 400V 50Hz 3N Total power 4 kW Main Material Stainless steel, acid-resistant Belt width 400 mm Electrical Power Supply Thermoforma Packaging System Description 2 pieces available Additional forms are included for each piece.

Key data: 700 mm

Thickness planing machine Fabr. Klein & Söhne Planing width 700mm

Biomass CHP Boiler Plant – 5.4 MW Thermal and 995 kWe Turbine Capacity A lightly operated, complete biomass CHP boiler plant featuring a 9.5 MW bubbling fluidized bed boiler (BFB), designed for wood-based fuels. The plant includes a back-pressure steam turbine and a heat exchanger for hot water production from back-pressure steam. The plant was built by Estonian Filter Solutions, a company highly experienced in steam boiler plant engineering and EPC contracting. The BFB steam boiler was delivered by Vapor Boilers Finland. The steam turbine was manufactured by Triveni Turbines (India), in combination with a generator and controls from ABB. Other key equipment includes KSB pumps, conveyors from Technobalt AS, and rotary airlock valves from Rotolok UK. The power plant was commissioned in 2013 and operated at partial load until 2015. The control system, developed by Filter Solutio ...

Grooving machine for throughfeed process Brand: Vitap Type: Grooving New machine For the processing of acoustic panels Processing unit: - Shaft with 7 presettable saw blades, distance 30mm. - Blade thickness 4mm - Rotation of the shaft , 7000 rpm. - presetting with rapid hook HSK - Max diameter of the blade 125mm Workpieces: - Max. thickness of the panel 50mm - Max weight of the panel: Kg 50 - Max panel size : X no limit, Y 1200 mm, Z 50 mm - Min panel size: X 400 mm, Y 300 mm, Z 12 mm - Panel feeding speed : 25m/min Characteristics: 3 controlled axes: - X Axis - Panel movement with two dinamic clamps - Y Axis - Grooving head movement with pinion and precision rack - Z Axis - Movement with screw at spherical recirculation - Newly patented, high rigidity operating unit movement on Y and Z axis. - Constant side pushing to keep the 0-line - Positioning ...

Thicknesser Brand: Panhans Type: 436/100 New machine TECHNICAL SPECIFICATIONS Planing width 630 mm Planing height 3 - 300 mm Chip removal max. 8 mm Thicknesser table length 1100 mm Blade shaft speed 5000 rpm Motor power feed 0.55 kW / 0.8 PS / 0.75 kW / 1.0 PS Extraction nozzle Ø 160 mm can be used on the left or right Feed speed 7 + 14 m / min Color RAL 7035 light gray and RAL 5000 violet blue Net weight approx. 1050 kg TECHNICAL DESCRIPTION Solid German mechanical engineering For thickness planing for planing widths up to 630 mm and planing heights from 3 to 300 mm, compact and ergonomic machine dimensions Planed in the factory PANHANS solid steel knife shaft Ø 125 mm with 4 pieces of Tersa reversible knives Pendulum mounted feed rollers Segmented rubber infeed and outfeed rollers with Ø 90 mm ensure smooth and safe workpiece feeding With sectional pressu ...

Splicing machine with glue thread Make: Casati Type: Z 1000 New machine Technical details: Arm length: 1.000 mm Veneer thickness: 0,4 - 1,5 mm Feed speed: 8 - 18 m/min. Overall dimensions: 1.350 x 500 x 1.300 mm Equipped with: - Key pad of the electronic control device for the heating temperature setting - Electronic digital read-out for an accurate monitoring of the heating temperature - Handwheel of the motor speed control for the stepless adjustment of feed speed - Knob of the motor speed electronic control for the stepless adjustment of oscillation angular speed of the heating arm independent of the linear feeding speed (zig-zag pitch) - Glue thread heater by electric resistance - Electronic adjustment of the heating temperature of the thread with accuracy ± 1°C - Electronic unit with stored control program - Separating fence with pressure wing - Holder of t ...

Manufacturer: Kallesoe, Width mm: 1350, Length mm: 5000, FREE TEXT: With feeding KL20 and stacking line,

Key data: 55 KW, 2970 1/min

Power: 55 kW Rated Speed: 2970 1/min 400V / 93 A

Type 210 standard 13 Shear: 13 mm Flat steel: 150 x 16 mm Punching:nbsp; example: dia 25 in 16 mm Stroke: 27 mm 50 ton Notching: 12 mm L/T steel: 80 x 10 mm U steel: 140 mm I steel: 160 mm round bar steel: 42 mm square bar steel: 38 mm L-profile 90°: 110 x 10 mm L-profile 45°: 90 x 9 mm Punching pressure: 50 ton Power needed: 3 kW Length: 1270 mm Depth: 800 mm Height: 2180 mm Weight: 2 ton

Manufacturer: Simmpianti, Year: 1998, Longitudinal through running press: yes, Stages: 1, Work piece width min-max mm: 2700 mm X 3200 mm, Min.-max. workpiece height in mm: 3-80, Press length mm: 3200, Pressing width mm: 2700, Press power kg /cm²: 4-6, Warmwasser beheizt: yes, Feeding: yes, Automatical glue supply: yes, Veneer applicaition table: yes, Through running machine: yes, Destacking: yes, Year :1998

Manufacturer: Sergiani Querdurchlaufpresse Warmwasser, Type: GSA, Year: 2009, Durchlauffunierpresse: yes, Dimensions of heating plate approx. mm: 3500 X 1300, Number of storeys: 1, Cylinder stroke: 350, Charging side: Quer, Landing opening mm: ca.350, Steel heating plates: yes, Min-max temperature: 0-120, Heated by: Warmwasser, Overall pressure kN: ca.4 kg²cm, Press length mm: 3500, Pressing width mm: 1300, Transport roller conveyor: yes, Thermoilpumpenstattion: yes, Lateral press: yes, Belt conveyor: yes, Year :2009

Manufacturer: VEN DRY COLLECT 10-ETAGEN TROCKNER, Year: 2014, Work piece width min-max mm: 1.300, Min.-max. workpiece length in mm: 4.700, Min.-max. workpiece height in mm: 150, Number of pallets: 10, Working widht mm: 1.300, Conveyor lenght mm: 10 X 4.700, Feedin speed m/min: 3 - 15, Conveyor/Conveyor belt: Band, Heating register qty: 1, Fresh air m³/h: 2.500, Damper register - items: 1, Fresh air m³/h: 2.500, FREE TEXT: Temperatur 15-50 Grad inkl.Heizregister, Year :2014

Manufacturer: Nottmeyer, Type: Kommet Super SB, Year: 1988, Work bays: 1, Throuh running machine: yes, Working range X: 2600, Working range Y-axis: 800, Drilling support horizontal: 2, Drilling supprt from bottom: 5, Drill support from top: no, Belt conveyor: yes, Grid 32 mm: yes, Horizontal drilling from both sides: yes, FREE TEXT: ink. Bohrgetriebe , Year :1988

Key data: 37 KW, 2955 1/min

Power: 37 kW Rated Speed: 2955 1/min Weight: approx. 258 kg Price of an electric motor

Manufacturer: Italpress, Type: Mark/C, Year: 2000, Program: yes, Control: Siemens, Longitudinal through running press: yes, Stages: 1, Press length mm: 3400, Pressing width mm: 1200, Press power kg /cm²: 6, Zylinder: 8, Inlet conveyor: yes, Warm water heated: yes, Work piece thickness max mm: 100, Through running machine: yes, Belt conveyor: Auslauf, Year :2000

Key data: 1500 KW, 1490 1/min

Siemens 1.5MW DC Motor with Watercooler incl. Simovert Masterdrive (Watercooled) Description attached

Key data: 500 mm, 230 mm, 5 kW

SPECIFICATIONS: Working width: 500 mm Working height: 230 mm Electric height adjustment 2-speed drive Roller with 3 knives Installed power: 5.5 kW Voltage: 380 V EQUIPMENT: 4 spare blades Knife Adjuster

Key data: 410 mm, 240 mm, 4 kW

SCM 2041 FS Planer and Thicknesser Manufacturer SCM Italy AB 66989 Ref 110830 Year of manufacture approx. 1994, from school use in good condition 3 cutterblock Planing shaft speed 5000 rpm Planing: Table length 2000 mm Planing width 410 mm Support table length 1040 mm Support table length 910 mm Max. Chip thickness: 10 mm Jointing fence swivelling 0 - 45° Table adjustment for planer with rotary lever Pressure link vibration guard Thickness planing: Planing width 410 mm Max. chip thickness: 7.5 mm Chip thickness: 7.5 mm Min. planer thickness: 3 mm Max. planer thickness: 240 mm Planing thickness: 240 mm Thicknessing table length: 730 mm Sliding table roller Planing shaft speed 5000 rpm Feed speeds 6 and 10 m/min Height adjustment of thicknessing table with handwheel Infeed roller steel Exit roller steel Connections: Motor power: 4 kW with motor brake  ...

Nema Thermal Shock Test Chamber -40°C to +120°C Manufacturer: Nema Type: NTS 3000 / 2S Temp. range: -40°C to +120°C Mains voltage: 400 V Rated current: 88 A Nominal power: 55 kW Refrigerant: R 404 A Year of Make: 2000 Weight: 5000 kg External dimensions: W 4000 x D 2760 x H 3450 mm Chamber: W 3000 x D 1250 x H 1610 mm TS-06 More items - new and used - can be found in our shop! International shipping costs on request!

Pneumatic power chuck, Diameter 400 mm, Big Bore 140 mm 3 jaws, centrically clamped

MAX CAPASITY 63 T, DIAMETER ROLLING 110

Agilent G 1330 ALS Therm ASgilent Autosampler Thermostat for 1100/1200 HPLC Systems

Working width: 630 mm Dimensions (L/W/H): 115x110x120 mm turning speeds: 5000 U/min connected load frequency: 380 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 320 mm threading length: 300 mm thread pitch: mm total power requirement: 90 kW weight of the machine ca.: 12000 kg dimensions of the machine ca.: m Thread and worm grinder for steering worms The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 50 mm threading length: 100 mm thread pitch: mm total power requirement: 1 kW weight of the machine ca.: 1500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 254 mm grinding length: 350 mm thread pitch: 51 mm Control: SIEMENS S 8 total power requirement: 12 kW weight of the machine ca.: 5000 kg dimensions of the machine ca.: m B A H M Ü L L E R Automatic Internal Thread Grinding Machine Model IPE 12 i.S. Year 1985 Serial No. 103174 _______________________________________________________ workpiece Ø, max. 300 mm workpiece length, approx. 350 mm height of centers (WP spindle/grinding spindle) 300 mm table stroke approx. 450 mm thread diameter ground max. approx. 254 mm thread diameter ground min. approx. 25,4 mm thread length ground in one setting max. 250 mm Lead range, max. 51 mm Lead angle max. 10 ° Total electrical load, approx. 12 kW - 380 V - 50 Hz Weight, approx. 5,000 kg  ...

workpiece diameter: 30 mm workpiece diameter: 30 mm threading length: 110 mm threading length: 110 mm thread pitch: 0,5-2,75 mm/GG thread pitch: 0,5-2,75 mm/GG total power requirement: 4,5 kW total power requirement: 4,5 kW weight of the machine ca.: 1,7 t weight of the machine ca.: 1,7 t dimensions of the machine ca.: m dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A universal Illig double-stroke thermoforming machine is available. Form dimensions X/Y: 960mm/560mm, max. drawing depth: 280mm, max. panel dimensions X/Y: 960mm/560mm, motor power: 1.5kW, heating power: 16.3kW, heating zones: top and bottom. On-site inspection is possible.

A mobile diesel three-phase generator set with a Volvo engine and Stamford generator mounted on a Steyr truck is available. 1) Steyr 17S230 truck, payload: 17t, engine power: 230kW, platform length: approx. 9m, engine-gearbox and rear axle: MAN make, including additional tank with a volume of 2000l, mileage: approx. 400,000km. 2) Generator diesel engine Volvo TAD1631GE, power: 485kW, speed: 1500rpm, including exhaust gas turbocharger, intercooler, front radiator, starter, alternator, speed governor, connection housing, intake air filter with fine filter and intake air heating for colder outside temperatures. 3) Stamford HCI544F1 generator, type output (oversized): 670kVA, continuous output: 560kVA. The engine is integrated in the base frame with the fuel tank of the truck (400 l) and the auxiliary tank (2000 l). This makes it possible to produce 10000kWh of electricity at a time. Conditi ...

A complete LTG Mailänder (now Koenig & Bauer) thermal exhaust air incineration plant is available. Exhaust air volume: 20000Nm³/h, max. solvent volume: 1.5g/m³, max. combustion chamber temperature: 850°C, fuel: natural gas, calorific value: 10kWh/m³, connected load: 45kW, solvent filter capacity: 30kg/h. Documentation available. On-site inspection is possible.

a used thermal laminating machine Billhöfer EK TL 4/70

Billhofer Ek 76 50 Year of manufacture 2001

Key data: 410 mm, 220 mm

Dressing and thickness planing machine TOP Master FS 410 Function tested Working width: 410 mm Max. planing thickness: 220 mm 4-knife shaft Dressing table length: 2000 mm 2 feed speeds Feed and Pull Roller: Steel Table rollers Tiltable stop Very good condition Weight approx. 900 kg

Fully Automatic Thermoforming Machine: cup/container forming, filling and film sealing system. Applicable for vacuum, gas and MAP (modified atmosphere packaging) packaging of food, meat, sea food, fruit, vegetable, medical and hardware items. - Main parts made of stainless steel, easy to change modular moulds, water cooling system for thermoforming mould and sealing module. BUSCH (Germany) vacuum pump, OMRON PLC, touch screen and servo motor, SCHNEIDER relay and air switch. Upper packing materials: heat-sealable films, lower packing materials: thermo-formable, heat seal film, rigid and flexible film is possible. - Specifications: total power: 380V, 13kW | air: 1m?/6bar | vacuum: 0.8-1.0m?/6bar | water: 4 liter/min | max. upper film width: 390mm (practical width 350mm) | length per mould: 200mm | max. drawing depth: 80mm (thermoforming depth depends on thickness of lower film) | loding ar ...