textile machine used for sale

MIG MAG welding machine, arc welding machine EWM type MIG 230Fabr. No.: L/0340 Year of construction 1994Power 230 Amp. = 35 % ED 120 Amp. = 100 % EDEsetting range 8 stepsMains connection 400 volts, 50 Hz, 16 Amp. Plug- 2-stroke and 4-stroke welding device- Spot welding device- 2-roll wire feeder- 3 meter hose package with central connection- Welding gas pressure reducerSpace requirement L x W x H 1000 x 450 x 700 mmWeight 70 kgGood condition; used

TIG and Electric Welding Machine / Inverter ESAB Type LTN 160WIG Welding Machine for TIG and ElectrodeFabr. No. 405-423-0479 Year of construction approx. 2010Power TIG 160 Amp. = 35% ED 110 Amp. = 60% ED 80 Amp. = 100% EDL power electrode 140 Amp. = 35% ED 110 Amp. = 60% ED 80 Amp. = 100% EDNetz connection 230 Volt, 50 Hz, Schuko plug- stepless power adjustment- 2 stroke and 4 stroke operation- Operating mode rod electrode- 12 meter TIG hose package with hand torch- only DC = DC- HF ignition-

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 28317 Year of construction approx. 1960Travel distances X: 245 mm Y: 150 mm Z: 340 mmTable size 600 x 210 mmSpindle holder horizontal MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 0.8 and 1.1 kW pole-switchableMains connection 380 volts, 50 Hz spindle speed over 2 motor speeds and 6 gear stages- Feed in the X and Z axis coolant device with mechanical pump in the machine base

Stud welding machine KÖCO KÖSTER & CO. Type 601 EWider-stand welding machine with capacitor discharge technologyFabr. No. 5356 Year of construction approx. 1995Maximum welding current 600 Amp.Welding power at 3% ED 600 Amp.Welding power at 100% ED 100 Amp.Bolt diameter 3-8 mmMaximum welding time 550 msMains connection 400 Volt, 50 Hz, 16 Amp. Plug- Welding current adjustment infinitely variable- Welding time adjustment infinitely variable- Welding gun KÖKO K14 with stroke ignition with 2 meter connection cable- 2 pieces of ground cable with 5 meters

Manual Pipe Bending Machine, Pipe Bending Machine, Mandrel Bending MachineHand Pipe Bending Machine, Hand Wire Bending Machine, Bending MachineManufacturer: MEWAGing Power: max. 16 mm1 piece bending tool 15 mm with 25 mm bending radius1 piece bending tool 10 mm with 16 mm bending radius1 piece bending tool 8 mm with 9 mm bending radius1 piece bending tool 6 mm with 8 mm bending radius1 piece bending tool 5 mm with 8 mm bending radius- Turning plate with degree marking- Scope of delivery as shown- Wooden box for storageDimensions L x W x H: 570 x 480 x 145

Internal threading machine HAGEN & GOEBEL type HG 10Tapping machine, vertical tapping machineMasch. No. 4462 Year of construction approx. 1980Cutting capacity in steel M3 to M10Cutting capacity in cast iron M3 to M16Cutting capacity in brass M3 to M 18 mmProjection 250 mmPine stroke 80 mmTable size 340 x 240 mmSpindle speed 200-1000 rpm. 6 stagesmotor power 0.55 and 0.75 kWNet connection 380 volts, 50 Hz- 6 speed levels by 2 motor speeds and 3 belt steps- thread pitch over

Brush deburring machine, tube deburring machine ERINI type 250Year of construction approx. 1995Brush diameter 250 mmBrush width 25 - 60 mmSpeed 1500 / 3000 rpm. Power 2.2 / 2.8 kWNetz connection 380 Volt, 50 Hz- Material support- new deburring brush- Suction connection 100 mmSpace requirement L x W x H 620 x 500 x 1150 mmWeight 100 kgGood condition; used

Spot welding machine DALEX type SL 16 EAMasch. No. 68611900-5 Year of construction 1986Nominal output at 50 % ED 16 KVASwelding capacity max. 50 KVA charge max. 500 mmElectrode force max. 17 - 278 daNElectrode arm 45 mmElectrode holder 25 mmArm spacing 140 mm / 280 mmCircuit breaker 8 stagesControl 4 times with single and series pointsOperating pressure 1-6 barOpen circuit voltage 1.8 to 3.6 voltsConnected load 37 kVANnet connection 400 volts, 50 Hz- Triggering of the welding cycle via

Roaches 3 Bath Laboratory Glass Dyeing Machine Roaches 3 Bath Laboratory Dyeing Machine 240 V 6500 W 10 A HxWxD= 920 x 1760 x 450 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Oscillating mortiser with 2 benches BALESTRINI mod. 2CAP

REF-2665 ILPRA FS 2500 V/G AUTOMATIC CUP FILLER-SEALER Manufacturer: ILPRA Series: FILL SEAL Model: FS 2500 V/G FL Serial no.: FS1071 Year: 2017 Automatic rotary filling-sealing machine for cups of different materials. Compact and flexible model, tailored to handle a diverse range of food products from liquids and creams to granules, even with solid particles in suspension. Maximum output of approximately 2,500 pieces per hour. Voltage: 400 V + N Overall dimensions (mm): 2,350 x 1,280 x 2,200 (LxWxH) Weight: approx. 900 kg

Bulk Distribution Station

Used Radial Drilling Machine DONAU Donauflex 145 Year of Make: 2006 Only a few hours of operation. • Drilling capacity in steel 45 mm • Boom travel 1,050 mm • Drilling radius min. 540 mm / max. 1,590 mm • Spindle speed 15 - 2,800 rpm • Tapping device • Tool holder MK 4 • Hydraulic clamping for boom and lifting column • Electromagnetic feed clutch • Machine light

Machine Base Soil Tillage Machine, Floor Cleaning Machine, Floor Curing Machine Base -Manufacturer: Minuteman, Floor Curing Machine Base Machine base floor processing machine -Type: 670238 -Voltage: 230V -Accessories: including transport case, see photos -Transport dimensions: 790/580/H470 mm -Weight: 40 kg

Welding machine, plastic welding machine, plastic socket welding machine, plastic welding machine, PE pipe welding machine, plastic pipe welder, socket welding tool set -Manufacturer: Ritmo, socket welding tool set type R 63 TFE -Voltage: 230V -Power: 1400W -Sleeves: Ø 16 - 63 mm, see photo -Dimension box: 450/350/H130 mm -Weight: 8.4 kg

Sumbel Machine Package; cleaned and tested; consisting of Sumbel Herold 800 banding machine and Sumbel Regent 800 grating machine. Machine package Sumbel; cleand and checked; gluing machine Sumbel Herold 800 and pressing down machine Sumbel Regent 800.

Used Labeling Machine plus capsuling machine GAI 6206CH 001 1200 bph General machine features This Machine integrates efficiently into low and medium capacity bottling lines. GAI manufactured this unit in the year 2012 and configured it to operate at a nominal speed of 1200 bottles per hour. Therefore, this output makes the machine suitable for operations that require flexibility, reliability, and compatibility with various container formats. In addition, its design supports a wide range of production environments. Capsuling unit configuration The capsuling unit rotates in a clockwise direction and uses rotary motion to handle capsule application. Specifically, the machine includes two independent heads. One head applies heat shrink or poly capsules for still wine. The other head applies tin or polylaminate capsules for sparkling wine. As a result, this dual head configuration allows ope ...

TECHNICAL DATA: Processing dimensions: max. 1000 x 300 x 70 mm Horizontal Spindles: 5 + 1 Horizontal drill speed: 4500/9000 rpm Horizontal drill bit holder: Ø 16 mm Saw: Ø 130 mm Installed power: 10 kW

TECHNICAL DATA: 02 Drilling spindles (1 HP each) 01 6-spindle mortising unit (2 HP) 02 Workpiece holding piston

- Belshaw automatic donut machine - Manufacturer: Belshaw Bros., Inc., USA - Type: MK V-CE - Automatic Donut Frying Machine - Voltage: 380 V - Phase: 3 - Power: approx. 7.9 kW - Frequency: 50 Hz - Used - Condition see pictures

B50 - Mech. Bending machine/reinforcing steel bending machine New / Unused Year of construction 2026 -Technical data see data sheet Dimensions LxWxH 1.4x1.3x1.5 meters / Weight 500Kg

Non-contact optical dimensional measurement X/Y measuring strokes: 200 x 100 mm, 300 x 170 mm or 400 x 200 mm depending on configuration Z measuring stroke: 150 mm Resolution: 0.1 μm Measurement system: linear encoders X/Y axis accuracy: (2.2 + 0.02L) μm Z-axis accuracy: (4.5 + 0.006L) μm Manual X/Y travel with quick release system Motorized Z-Shift with Autofocus 3 megapixel CMOS color camera 7x optical zoom with 8 positions White LED coaxial lighting White LED transmitted lighting 4-quadrant white LED ring light Reference temperature for accuracy: 20 ±1 °C Maximum load on the table: 10 to 20 kg depending on configuration Remote control of the measuring functions Computer system with screen, keyboard and CPU Auction-ID: A1-51172-124

Dough divider with long roller and deposition KÖNIG, type: Rex Futura II T4 - 4 or 3 rows can be used - with long scooter - with placement on baking trays - Many parts renewed worth EUR 15,000 - Drum SK 58 for 35 - 85g and SK 70 for 60 - 135g dough weights - Condition: Very good, ready to use

Brand: OTT Model: Pacific Plus Type: edge banding machine Connection: 380 V / 50 Hz Edge thickness: 0.3 – 15 mm Workpiece height: 8 – 60 mm Throughput speed: 12 – 18 m/min Machine length: 5,600 mm Execution and options: Professional Package Pacific Plus 18.5-inch touchscreen instead of 15-inch 2 additional swing-away support roller conveyors Automatic supply magazine for strips or solid slats PUR cleaning set with 4 nozzles and brushes Pre-equipment on ACF rounding unit for quick-change motors or automatic 3-position AKF milling Automatic 2-position scraper unit with foil compensation Equipped with R1 and R2 tools Automatic 3-position AKF milling: R1 / R2 / angled 45° Control via control panel, barcode or QR code Anti-static spray device 2 nozzles: 1 top / 1 bottom Spray device for PVC and plastic edging material Diamond roughing  ...

MILLING MACHINE IMES-ICORE CORITEC 350i loader with its suction THE BEST MILLING ON THE MARKET Material, good working condition and cosmetics Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force. Lots may be added to the list later. An exhibition beforehand is set up, please inspect. The equipment is made available on pallet or pallet box or cardboard with all the appropriate protections, the price of the packing is integrated into the sale price. For shipping, you can have your transport pass or go through the carrier JMA express, or ask us for a shipping quote by Fedex. See  ...

Operation: Electronic dosing buttons per brew group Stainless steel housing design, head tray and removable drip grid equipped with 6 guns Auction-ID: A1-47451-266

MAMMUTH machinery transport roller/skate set with steering handle and multiple roller units. Appears little used/new condition. Suitable for moving industrial machinery inside workshop or warehouse. Auction-ID: A1-51153-70

Consisting of a round vibrator, a round dryer and a water treatment system (type: Z300 Turbo) with centrifuge (type: Z800). Auction-ID: A1-51529-123

Small conventional shaping/slotting machine with T-slotted table and manual controls. Compact workshop machine for light shaping and slotting work. Auction-ID: A1-51153-76

Incl. threading device with control. Auction-ID: A1-51529-127

Ref. -No.: 10322 Manufacturer: EKO PILL Year of construction: 2010 Further information: The PMO 950K carousel jet washer is revolutionary maintenance-free washer, extremely compact and aesthetic structure, designed for oil contamination, machining emulsions and loose chips from washed objects. Despite its minimized dimensions, it works perfectly together with automated production lines for thorough washing, and optional rinsing and drying of moving parts on the internal conveyor. Short distance between station Loading and unloading facilities make it flexible. Washing, rinsing as well as drying operations take place in closed circuits, which significantly reduces costs - Gravity oil separator OGP - Fine filter EKO-PIL 20 µm - Vapor condenser with liquid regeneration - Drying heat recovery - Washing - Rinsing / Maintenance - Drying

Power: 2200W (2.2kW) Speed: 1420 rpm (revolutions per minute) Degree of protection: IP 55 (dust and water jets protected) Auction-ID: A1-51523-33

Brand: Jansen Model: TBF-180 Year: 2021 Dimensions indicated: 203 × 95 × 100 cm Indicated weight: 380 kg Three-point hitch PTO drive Supplied with gimbal Auction-ID: A3-46114-35363

Small conventional shaping/slotting machine with T-slotted table and manual controls. Compact workshop machine for light shaping and slotting work. Auction-ID: A1-51509-76

MAMMUTH machinery transport roller/skate set with steering handle and multiple roller units. Appears little used/new condition. Suitable for moving industrial machinery inside workshop or warehouse. Auction-ID: A1-51509-70

5-color R23847/15 PROPHETEER flexographic printing machine 18" Model: 1800 Built: 1998 available: immediately 5- Colors for labels and other products e.g. for cups / cups 18 Corona Car register Stacker Video Scanner Flat-in diameter: 1016 mm Available: immediately