128,657 used machines on RESALE, but how to find them? Machine Search
Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Capacity: 25 Ton Power: 20 kW Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-727
Equipped with 6-Cil. 912 diesel engine; lower drawbar; 3 double-acting hydraulic valves; depressurized return; PTO brake valve: 540/1000rpm; \"Mailleux\" front loader MX100; hydraulic quick coupler; additional hydraulic function; Adjustable handlebar: Auction-ID: A1-40134-159
Equipped with: type: 1200, year of construction: 1993, working height: approx. 12.20 meters, max. lateral reach: approx. 4.50 meters, max. Basket load: 215 kg (suitable for 2 people + tools), Own weight: approx. 1,120 kg, Dimensions work basket: 1.10 x 0.65 meters, Drive: electric 220V, equipped with 4 mechanically extendable outrigger legs for quick and safe setup, 7-pin plug, no license plate, outrigger plates. Auction-ID: A1-40134-182
Everything works properly. Comes loose with a complete air brake system. Hours reading not readable. Auction-ID: A1-40134-87
Max working pressure 180 bar equipped with quick coupler Auction-ID: A1-40134-375
380V, 19kW working well. Auction-ID: A1-41992-90
Equipped with 6-Cil. \"FIAT\" diesel engine; 160 hp; mechanical transmission; mechanical forward/reverse; 4 gear groups can be shifted 4 times each; PTO: 540/1000 rpm; 3 double-acting hydraulic valves; air system; adjustable tow bar; original \"Fiat\" wheel weights (rear 300 kg / front 80 kg); original \"Fiat\" front weights 10 pieces of 40kg each; roof hatch; front window can be opened; Auction-ID: A1-40134-21
Saw blade diameter 350-400 mm, cutting speeds 9-20 m/min, hydraulic flow rate 6 l/min, feed speed 0-1000 mm/min, express return 1800 mm/min Auction-ID: A1-45714-44
good driving camper needs a little maintenance has stood still for 2 years Auction-ID: A1-42013-222
Annual Collection GDR 1985-1987 + 1989, 1 carton
Technical data Manufacturer: Overbeck Type: 250 RU Year of Make: 1984 Workpiece diameter max.: 100 mm Max. grinding length: 250 mm Tip height: 100 mm Grinding wheel: Ø 300 mm Max. workpiece weight: 12 kg Spindle speed workpiece: 150–1350 min⁻¹ Grinding spindle: 2040 / 2440 min⁻¹ Power: 4–7 kW Weight: approx. 1350 kg (net) Configuration Hydraulic table movement Internal cylindrical grinding device Collet holder DIN 6341 Swivelling workpiece and grinding headstock Manual and automatic delivery Hydraulic quick adjustment Auction-ID: A1-45711-301
Technical data (as far as known) Manufacturer: Hydropa Hydraulik Type: ISP196FS Year of manufacture: 11/1981 Flow rate: approx. 28.5 l/min Drive: Electric motor (Siemens) Version: stationary hydraulic power unit with tank For sale is a used hydraulic power unit of the brand Hydropa Hydraulik (Germany). The power unit consists of an electric motor (Siemens), hydraulic pump, oil tank and valve and control block. According to the nameplate, the flow rate is approx. 28.5 l/min. ⚠️ Important note: A functional test was not carried out. The current operating status is unknown. Sales are therefore expressly made as untested / hobbyist equipment / spare parts carrier. Auction-ID: 04K-6PA-1
Drum diameter: approx. 400 mm; drum capacity: approx. 27 l Auction-ID: A1-45711-331
HÜLSKEN slurry tanker RF 10000 / 1709 Year of construction 1997 Barrel volume approx. 10,000 litres Used machine in functional condition Age-related signs of wear and patina present TÜV new Vacuum barrel with suction and pressure system PTO Filling system / suction arm available Rear outlet / docking system WABCO ALB brake system Single-axle chassis Tyres 30.5R32 Auction-ID: 04K-92L-1
Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...
Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...
Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...
- Variable feed speed. - It consists of 6 heads, tiltable, adjustable in height and depth. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-702
with cutting motor: 1.5 kW, 3-phase, 1 M (inverter controlled) Pitch setting (L): Max. 1200mm, including: metal trolley: 1050 x 500 x 880 mm (L/W/H), including: rolling stand with contents, dimensions: 1840 x 1630 x 900 mm (L/W/H) Hall 1 Auction-ID: A1-45762-1
Mercedes-Benz Fire Fighting Vehicle Type 409 (LF 409) Year of manufacture / first registration: 07.04.1981 Vintage vehicle Mileage: approx. 46,516 km (read) Gasoline engine, manual transmission Engine running Box body with equipment compartment and shutters Crew cabin with bench seats Roof rack / roof platform available Ladder available Blue light system available Used condition Age-related paint wear Rust spots present (especially in the lower body area) Interior well maintained and complete Vehicle comes from fire brigade stock Suitable for restoration or conversion (e.g. camper / event vehicle) Registration papers available Auction-ID: 04K-8AC-1
Load capacity: maximum. 500 kg Auction-ID: A1-45762-90
Tool trolley with 7 drawers. Tool trolley has two normal and two swivel castors with brake. Tool trolley that can be fully locked by an integrated lock. Drawers can be locked per compartment. All drawers equipped with quick-release fastener and soft close. Tool trolley is equipped with 196 tool parts: 3 sets of sockets: 1/4\" from 4 - 14mm, 3/8\" from 6 - 22mm and Torx from E10 - E20, 1/2\" from 8 - 32mm. Various screwdriver sets. Extension for socket wrench sets, various Allen keys from 1 - 10mm, various files. Ratchet ring wrench set from 6 - 22mm, ring wrench set from 6 - 22mm. Pliers assortment. Dimensions 78 x 48 x 105 cm. Weight 79.5 kg. Condition: never used / new (5) Auction-ID: A7-45761-756
Technical data Manufacturer: Schroeder & Bauer Type: HB5 Year of Make: 1982 Machine No.: 5211 Operating voltage: 380 V Frequency: 50 Hz Power: 1.5 kW Rated current: 3.6 A Configuration Type: Industrial press (electric drive) Auction-ID: A1-45711-131
Inner diameter 980mm Auction-ID: A1-45711-329
HORIZONTAL BAND SAW KASTO SBL 280 U FROM 1996 - METALWORKING MACHINE - SERIAL NUMBER 6003102458 WITH DOCUMENTATION Auction-ID: A1-45663-3
Technical data Manufacturer: Kaiser Pressen, Pforzheim-Kieselbronn Type: PV 50 Year of Make: 1975 Press force: 50 t Stroke rate: 95–400 rpm Stroke: 8–60 mm Plunger adjustment: 60 mm Configuration Execution: Eccentric Press Feed: Electronic roller feed Manufacturer feed: Zehnder & Sommer Automation Model: EV 12 – 22 AK-ZZ Max. strip cross-section: 150 mm² Auction-ID: A1-45711-107
Pneumatic conveying system for bulk materials (e.g. sand, granules) Consisting of 4 main components: Ferroplast pressure silo (approx. 1000 litres, up to 10 bar) Normann Bock Pressure Vessel WS 15.0 (Dosage) Ferroplast Control Unit (Compressor & Shaker Control) Steel frame construction (load-bearing, stationary) Year of construction: approx. 1993 Condition: used, heavy corrosion, function not tested Suitable for industrial conveying and dosing processes Estimated total weight: approx. 1,500 – 2,000 kg Sale as complete unit from location Auction-ID: 04K-6MP-1
Technical data Machine Type: Automatic punching machine Manufacturer: Bruderer AG, Switzerland Model: BSTA 40 Year of Make: 1978 Compressive force: 40 t Stroke rate: 50–1200 strokes/min Stroke adjustment: 13–57 mm (stepped) Tool installation height: 452 mm Tool installation height adjustment range: 60 mm Outlet columns (longitudinal): 210 mm Outlet columns (transverse): 680 mm Clamping surface at the bottom: 680 x 550 mm Clamping surface at the top: 680 x 400 mm Bed opening: 640 x 220 mm Strip running height: 60–140 mm Configuration Feeder: BBV 200/120 Max. belt width: 200 mm Max. strap thickness: 6 mm Feed length: 0–120 mm Soundproofing booth: DRIVER FKE 500/110BM (YOC 03/2001) Tool monitoring: SIEGFRIED Press-Processor SPP 450 Auction-ID: A1-45711-319
Technical data Manufacturer: Grötzinger Type: SPP 30/90 Year of Make: 1973 Machine number: 10481173/4715 Printing capacity: 30 t Working stroke: 250 mm Cutting surface: 750/1 mm² Working length: 450 mm Work table width: 390 mm Weight: approx. 770 kg Configuration Machine type: Press Nameplate information: Manufacturer: Grötzinger, Pforzheim Execution: Industrial press with 30 t pressure capacity and 250 mm stroke Auction-ID: A1-45711-116
Stamps FRG GDR German Reich ETBs from 1974 ETBl Special Prints Jubilee Covers Stamp Booklet, in 3 Boxes
- Total installed power 51 KW. - Working width from 20 mm to 230 mm. - Working height from 9 mm to 140 mm. - 8 heads: down 5.50 KW - right 5.50 KW - left 5.50 KW - right 5.50 KW - left 5.50 KW - up 5.50 KW (MISSING HEAD) - up 5.50 KW - down 5.50 KW. - Axle diameter 40 mm. - Rotation speed of the shafts 6000 rpm. - Some accessories are included. - IMPORTANT: A complete top head is missing. There is only the motor. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-701
Load factor Maxim 75kg/meter, maximum possible tire width 945mm, belt frame is approximately 4 meters extendable, double hydraulic angle adjustment per frame part Auction-ID: A1-42370-27
- Rotary crown wrapper. - Crown diameter 250 mm. - Variable crown speed. - Variable feed speed. - Maximum dimensions of the workpiece approx. 170 x 70 mm. - Upper pneumatic grippers to stabilize the piece. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-728
90cm wide track shoes, work lights and joystick controls, Excluding gripper and rotator Auction-ID: A1-42370-13
- Maximum workpiece width approx. 120 mm. - Maximum part height approx. 100 mm. - 4 rubber top rollers + 4 metal bottom rollers. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-713
- Total installed power 2.50 KW. - Portable, with wheels. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-732
Fit: John Deere 818 Width: 5.50 m Cup year: 1999 Auction-ID: A1-45633-12
- Total installed power 2.30 KW. - Variable feed speed. - Variable crown speed. - Maximum dimensions of the piece 120 x 120 mm / 160 x 80 mm. - Minimum dimensions of the piece 20 x 20 mm. - Upper pneumatic grippers to stabilize the piece. - A TOLINTEMA MM 210 roller transfer is included. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-703
Equipped with 2 double-acting functions, return line, hydraulic cw30 quick coupler, hydraulic outriggers, sliding blade, 6 cylinder volvo diesel engine and joystick control Auction-ID: A1-42370-19
- Total installed power 2.50 KW. - Portable, with wheels. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-720
- Total installed power 53 KW. - Working width up to 170 mm. - Working height up to 120 mm. - 8 heads: down - right - left - right - up - up - down - universal . - Axle diameter 40 mm. - Rotation speed of the shafts 6000 rpm. - Variable feed rate. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-714
- Variable feed speed. - It consists of 7 heads, tiltable, adjustable in height and depth. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-731
Fully-automated yeast propagation plant with 2 cylindroconical tanks each 60 hl in stainless steel for yeast propagation and 2 cylindroconical tanks each 60 hl in stainless steel for yeast storage, A conversion and automation was carried out by Esau & Huber in 2007., 2 tanks for yeast propagation each: 80 hl total volume, 2 tanks for yeast storage each: 80 hl total volume, Material: stainless steel, Features: Yeast propagators and yeast tanks have a cooling zone + 1 cone cooling, PT100, weigh cells, circulation pump, yeast aeration
OKUMA LB15 – CNC Lathe Highlights • Model OKUMA LB15 • Tool turret with 12 tool positions Technical data • Turning length max.: approx. 500 mm • Turning diameter max.: approx. 250 mm • Tool positions: 12 • Machine dimensions: approx. 2600 x 3600 x 1800 mm • Machine weight: approx. 5000 kg • Nominal voltage: 380 V • Phases: 3 • Frequency: 50 Hz • Power consumption max.: 21 kVA Equipment • Tool turret • CNC control • Protective cladding • Chip conveyor Note • Loading must be carried out by the buyer Auction-ID: A7-45863-2
Machine type: Universal milling machine Manufacturer: ALCERA (AMSTUZ / LEVIN) Model: 6S Year of manufacture: 1979 Table size: approx. 1100 x 265 mm Longitudinal travel (X): approx. 700 – 800 mm Cross travel (Y): approx. 200 – 250 mm Vertical travel (Z): approx. 400 mm Spindle: Horizontal spindle with vertical milling head Spindle taper: ISO 40 Spindle speed: approx. 30 – 1000 rpm (multi-stage gearbox) Feed: Mechanical feed on X/Y/Z axes Control: Heidenhain digital readout (3-axis DRO) Condition: Used, visible signs of wear and chips Remarks: Robust conventional milling machine suitable for toolroom and general machining; equipped with digital readout for improved positioning accuracy Approx. own mass: 1800 – 2200 kg Approx. dimensions (LxWxH): 2000 x 1800 x 1800 mm Auction-ID: A7-45364-9
maximum number of results exceeded
please refine your search
1.950 € 
