tetra tba 19 used for sale

Equipped with: Carrier Presenter 1945 fridge/freezer (plug-in) at 230V/50Hz with approx. 650W power, power consumption ±8.8A, refrigerant R404a (1.15 kg), construction date 21-01-2019 and suitable for commercial refrigeration Auction-ID: A1-40103-86

Features: DC motor controller, full-height rideability, variable speed, dual-rear wheel hydraulic drive, proportional control for travel and lift functions, 0.91 m extendable platform, low battery protection, solid rubber tires, Non-marking, attachment points for safety cords, forklift openings and attachment/lifting eyes, working height: 8.10 m, platform height (max): 6.10 m, platform height (retracted): 0.97 m, total width: 0.84 m, total Length: 2.32 m, Height (handrails up): 1.97 m, Platform width (interior): 0.71 m, Platform length (interior): 2.13 m, Extendable platform (deck): 0.91 m Auction-ID: A1-40133-277

- Includes heidenhain handwheel and 1 color signal light - Excluding cooling tank and cooling installation/pump >/br> - Tools and fixtures not included Auction-ID: A1-41991-14

Manufacturer: YAMAZAKI MAZAK Model: Quick Turn 20 Year: 1997 CNC Machine: Mazatrol T Plus Axes: 2 Axes (X, Z) Capacities: Max. diameter above bed: Ø 300 mm Distance between points: 446 mm X-axis stroke: 180 mm Spindle: Bore: 61 mm Max. speed: 4500 rpm Motor power: 15 kW Turret: 8 positions Dimensions per machine: 2660 x 1520 x 1879 mm Unit weight: approx. 4170 kg (total batch weight approx. 8340 kg) Condition: used Auction-ID: A1-44765-261

Features: Cab 4wd Deutz diesel engine Excavator bucket Quick change system CW30 connection Auction-ID: A1-40133-189

Equipped with: 4WD, front linkage Cat 1, front PTO, hydr.valve front, cabin, heater, PTO 540-1000, Cat 1 rear linkage, 1300kg lifting capacity, 1 hydr.valve rear, free return, PTO, front tires 28x9.00-15, rear tires 14.5-20, beacon, 7 pin plug rear, air suspension seat, 16x16 gearbox, shuttle-shift. Auction-ID: A1-40133-186

With filter system ESB type AA 600 Compressed air protection class: IP54 Vibrating motor: 2 x 0.75 kW Fan motor: 2.2k W Total connected load: 6 kW Filter area: 2 X 72 m² Number of cartridges: 2 X 4 Extraction capacity: 6000 m³/h Air pressure maximum.8 bar Cleaning pressure: 7 bar, Including: 2 x ZA 02 lifting device, 8 Automatic powder gun type PG 2-AX, ESB control cabinet type 60191, Make number 600 Auction-ID: A1-45447-1

Auction-ID: A1-44765-402

The perfect wheel loader, a workhorse honest and solid Auction-ID: 04A-Y5X-3

Equipped with 6-Cil. \"Ford\" diesel engine; Range Command ABC + creep; transmission; PTO: 540/540E/1000; 4 double-acting hydraulic valves; hydraulic brake valve; depressurized return; adjustable tow bar; lower drawbar; fender control; 1 double-acting front hydraulic valve; Auction-ID: A1-40133-43

Equipped with: working height 7.90 m, platform capacity 363 kg, weight (+/-) 2,026 kg, length 2.44 m, width 0.81 m, height 2.12 m, height (railing folded) 1.78 m, platform width 0.81 m, platform length 2.26 m, platform length (extended) 3.18 m, battery power 24/225 V/Ah, non-marking tires, Auction-ID: A1-40133-270

Ford 6600 engine/chassis, 6 sections, 27 meter boom, 2200 liter tank, cap distance 50 cm, Stork fluid pump, track width 1500mm, suspension chassis, margin no VAT Auction-ID: A1-40133-14

Tool changer swaf conveyor nikken Auction-ID: A1-44765-401

- Maximum pressure 16 Bars. - Operating conditions of this machine: unchecked. - Dimensions for transport approx. 1200 x 800 x 1350 mm. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-76

Stationary punching machine W. Meitinger \"Record\" from 1966. Machine is suitable for stamping and machining metal parts. Classic workshop machine with mechanical drive via electric motor and belt. Ideal for workshops, metal construction or as a robust industrial machine. Auction-ID: 04J-7G3-1

Screw compressor Kaeser SK 19 Manufacturer: Kaeser Type SK 19 Machine number 01864 10 Built in 1993 max. pressure 13 bar Power consumption 11 kW Delivery volume 1,150 l/min Operating hours 34,957 B/h Defective contactor replaced Test run carried out lxwxh 84x78x101 cm Weight 270 kg Loading costs 50.00 Euro Auction-ID: 04J-7Y2-1

- Semi-automatic machine for the application of rubber edges with a \"T\" section on panels of different shapes and dimensions without the aid of counter-templates. - Retractable cutting device. - Applicator with vibration so as not to damage the edge surface. - Heater to facilitate application operation. - Retestador. - Total installed power 6.02 KW. - Thickness of the pieces from 10 mm to 30 mm. - Feed speed 5 m/min. - Table dimensions 1050 x 800 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-52

Documents available Auction-ID: A7-45416-2144

- Total installed power 9 KW. - Cutting length approx. 2500 mm. - Maximum cutting width approx. 2200 mm. - Maximum cutting depth 50 mm. - Maximum postforming cutting depth 42 mm. - Main disc unit: 300 mm disc diameter, 5.50 KW-04900 rpm motor. - Scoring disc unit: disc diameter 125 mm, motor 0.55 KW-05600 rpm. - Postforming disc unit: 300 mm disc diameter, 1.10 KW-04800 rpm motor. - Saw carriage: feed speed 12 m/min. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-70

Cabinet dimensions: H: 2000 W: 600 L: 1000 Auction-ID: A7-45416-101

Auction-ID: A7-45416-2157

- Total installed power approx. 20 KW. - Thickness of the edge in strips from 0.60 mm to 25 mm. - Thickness of the edge in roll from 0.30 mm to 3 mm. - Thickness of the workpiece from 10 mm to 60 mm. - Minimum width of the piece 65 mm. - Adjustable feed speed from 8 m/min to 30 m/min. - 5.50 KW advance motor. - CNI PIC 200 control. - Input spindle moulder group, 2 x motors. - Edge loader for slats and roll, edge tray for one roll. - VC34 QMS gluing unit with tank for granulated hot melt adhesive, with prefuser. - Pressure group with (1+3) rollers. - Cross-cutting group, 2 x 0.33 KW-12000 rpm motor. - Straight roughing group, 2 x 1.03 KW-12000 rpm motor. - Spoke profiling unit, 2 x motor, tilting. - Shape group, 4 x 0.33 KW-12000 rpm motor. - Milling unit tiltable from 0° to 90°, motor from 2.20 KW-12000 rpm. - Radius scraper group. - Tail scraper group. - Cleaning br ...

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43751-115

- Maximum cutting width 900 mm. - Maximum cutting height 120 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-57

- Installed power 1.12 KW. - Maximum pressure 15 Bars. - Operating conditions of this machine: unchecked. - Dimensions for transport approx. 1200 x 900 x 1250 mm. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-55

- Serial number 10474. - Maximum installed power 9 KW. - Maximum workpiece length approx. 2400 mm. - Maximum workpiece width approx. 330 mm. - Table for holding the templates. - 6 pneumatic clamping grippers. - 2 milling groups (right-left) with 5.50 KW motors. - Protective fences are included. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-56

Rice spotting press Weight: 5000kg Auction-ID: A7-45416-138

- IMPORTANT: - This machine can only be sold in the EU. Bidders from other countries are not eligible to participate in the auction of this item. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-41

- Total installed power approx. 20 KW. - Dimensions of the work table 5200 x 1200 mm. - Passage height on panel 320 mm. - X-axis travel: 5330 mm, y-axis travel: 1300 mm, z-axis travel: 300 mm. - Maximum travel speed in x-y-z directions: 45-45-25m/min. - Tool magazine with 10 positions. - Electrospindle: motor power 7.50 KW-max. 18000 rpm, automatic tool change, for ISO 30 tool holders. - Horizontal milling unit with 2 outputs to work in front of and behind the workpiece: motor power 5.50 KW-max. 18000 rpm. - Vertical holes in the x-axis direction: 6. - Vertical holes in the y-axis direction: 4. - Horizontal holes in the x-axis direction: 2+ 2. - Horizontal holes in the y-axis direction: 1 + 1. - NUM 1060 numerical control. - Remote control panel. - 25 suction cups. - BECKER VTLF 250 vacuum pump with a capacity of 250 m³/h. - Tools featured in photos are included. - Op ...

• Long belt sander • Serial number 15822 • Table dimensions 3000 x 800 mm • Vertical stroke approx, 500 mm with motorized positioning • Transverse travel approx, 800 mm • Main motor 2,20 kW • Manual sanding pad • 2 sanding speeds • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-289

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43751-114

Mannesmann Demag Start 026 Manufacturer: Mannesmann Demag Machine number 349012/23 Type Start-026 Year of manufacture 1996 max. pressure 10 bar Power consumption 15 kW Delivery rate 2,010 l/min Operating hours 33,700 B/h Load hours 16,400 B/h Test run carried out lxhxw 72x72x113 cm Weight 250 kg Loading costs 50,00 Euro Auction-ID: 04J-7XW-1

• Wide belt sanding machine • Serial number SA/003937 • Sanding width approx, 1350 mm • Workpiece thickness from 4 mm up to 170 mm • Vacuum transport belt, F,LLI FERRARI vacuum unit power 11 KW • Belt conveyor with variable feed speed • Feed motor power 4 KW • Aggregate 1: EPICS TA-46 transversal sanding belt driven by an electronic sectioned pneumatic pad: 46 sectors, sanding belt dimensions 6550 x 150 mm, motor power 11 KW • Aggregate 2: EPICS K-RP 46 combined roller and sanding pad aggregate: roller diameter 220 mm, 46 sectors,sanding belt dimensions 2620 x 1370 mm, motor power 18,50 KW, with blowers • Aggregate 3: EPICS PE-46 electronic sectioned sanding pad: 46 sectors, sanding belt dimensions 2620 x 1370 mm, motor power 15 KW, with blowers • Aggregate 4: brush unit • HYDRA RTC electronic management control, Windows environment • Operating con ...

- Includes cabinet and electronic components. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-53

Table size: 600 mm x 605 Auction-ID: A7-45416-225

Screw compressor Kaeser SK 19 Manufacturer: Kaeser Type SK 19 Machine number 1017 Built in 1999 max. pressure 10 bar Power consumption 11 kW Delivery volume 1,590 l/min Operating hours 40,914 B/h Test run carried out lxwxh 84x78x101 cm Weight 270 kg Loading costs 50.00 Euro Auction-ID: 04J-7Y0-1

- Includes: - 1 x OLEOMEC hydraulic power unit: 3 KW-1430 rpm motor, maximum pressure 100 Bars. - 1 x OLEOMEC hydraulic power unit: 4 KW-2850 rpm motor, maximum pressure 100 Bars. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-58

• CNC machining centre • Serial number 0-250-06-1632 • Total installed power approx, 18 KW • Useful working area approx, 2750 x 1000 mm • Travelling way X-axis: 3455 mm, Y-axis: 1480 mm, Z-axis: 260 mm • Maximum travel speed in the axes direction x-y-z: 80-60-20 m/min • Tool magazine with 8 positions •  Electrospindle: power 7,50 KW-max, 24000 rpm, automatic tool change, for HSK F63 tool holder, liquid cooled • Milling / saw group with 1,50 KW motor • Saw unit to groove • Vertical drilling spindles in X-axis direction: 11 • Vertical drilling spindles in Y-axis direction: 8 • Horizontal drilling spindles in X-axis direction: 3 + 3 • NUM 1040 numerical control • Software Windows 95 / HOMAG WOODWOP • 6 consoles with 2 vacuum suction cups each • 6 lifting modules for heavy workpieces • BECKER KVT 3,100 vacuum pump with capacity 100 m ...

- Edge thickness from 0.40 mm to 20 mm. - Thickness of the workpiece from 12 mm to 60 mm. - Minimum length of the piece 150 mm. - Minimum width of the piece 55 mm. - Adjustable feed speed from 18 m/min to 24 m/min. - HOMATIC NC 21 control. - Input spindle moulding group, 2 x 3 KW-9000 rpm motor. - Edge loader. - Gluing unit with boiler for granulated hot melt adhesive QUICK MELT A20. - Pressure group with (1+6) rollers. - HL 83 cross-cutting group, 2 x 0.40 KW-12000 rpm motor. - Straight roughing group, 2 x 1.50 KW-12000 rpm motor. - FK 13 shape group, 2 x 0.55 KW-12000 rpm motor with 8-position tool change each. - Radius scraper group. - FS 40 cleaning brush group, 2 x 0.25 KW-2800 rpm motor. - LIGMATECH ZHR 15/11/LI return system: year of manufacture 1997, serial number 0-305-09-2708. - Operating conditions of this machine: unchecked. - This item is delivered loaded  ...

- Total installed power 4.55 KW. - Main disc: 4 KW motor, speed 4000 rpm, maximum disc diameter 300 mm, inner diameter 30 mm, tiltable 0°- 45°. - Scoring disc: 0.55 KW motor, speed 9200 rpm, diameter 120 mm, inner diameter 20 mm. - Carriage length 3000 mm. - Maximum cutting width against the parallel guide approx. 1270 mm. - Maximum cutting height at 0°: approx. 100 mm, maximum cutting height at 45°: approx. 72 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-62

General information • Manufacturer: MAN • Type / Model: MAN 8.150 (G-Series, estimated) • Vehicle type: Vacuum truck / special vehicle • Registration date: 04.07.1994 • Previous owner: Kommunaler Einsatz (City of Elmshorn) • Vehicle status: Deregistered / out of service Technical data • Fuel: Diesel • Power: approx. 114 kW • Displacement: 6,871 cm³ • Axes: 2 • Permissible total weight: 11,400 kg • Empty weight: approx. 5,850 kg • Transmission: ZF SOK CX36 • Drive: rear-wheel drive (typical for this series) Structure / Equipment • Sewer cleaning body / faecal sludge suction vehicle • Vacuum suction system with tank (approx. 6 m³ volume) • High-quality pump technology (URACA) • Hose reel with suction hose • Rear control station / control unit • Rotating beacon available • Municipal special equipment acc ...

Circulation coins Norway 1920-1950 1 Öre 1940 1941 1945 1946 1949 1950, 2 Öre 1939 1940 1944 2x 1949 1950, 5 Öre 1920 1937 1938 2x 1942 1943 1944 2x 1945 1946 1948 2x 1949 2x 1950, 10 Öre 1931, 25 Öre 1937, total 29 pieces

Circulation coins Spain Football World Cup 1982 9x 1 Peseta, 11x 5 Pesetas, 3x 25 Pesetas, total 23 pieces

Circulation coins Brazil from 1943 5x 1 Centavo, 2x 2 Centavos, 8x 5 Centavos, 6x 10 Centavos, 7x 20 Centavos, 9x 50 Centavos, 5x 1 Cruzeiro, 2x 2 Cruzeiros, 1x5 Cruzados, 2x 10 Cruzeiros, 1x 20 Cruzeiros, a total of 50 pieces

Circulation coins Paraguay 1950/1953 1-50 Centimos, total 8 pcs.

Circulation coins Belgium before 1943 5 centimes 3x 1925 1941 1943, 10 centimes 1904 1921 1927, 25 centimes 1916 1918 1942 2x1943 50 centimes 1922, 1 franc 3x 1939 2x 1943, 2 francs 2x 1923, 5 francs 1932 1941, total approx. 23 pieces

Circulation coins Spain 1944-1957 10 Centimos 1945, 3x 50 Centimos 1949, 2x 1 Peseta 1944, 5x 1 Peseta, total approx. 11 pieces

Circulation coins Spain Franco 1963-1974 6x 10 Centimos, 4x 50 Centimos, 33x 1 Peseta, 18x 5 Pesetas, 8x 25 Pesetas, 1x 50 Pesetas, PTA 375.60, total approx. 70 pieces

Circulation coins Spain European Football Championship 1980-1982 13x 1 Peseta, 14x 5 Pesetas, 3x 50 Pesetas, PTA 233,-, total approx. 30 pieces

Circulation coins Spain Juan Carlos from 1975 39x 1 Peseta, 76x 5 Pesetas, 1x 10 Pesetas, 23x 25 Pesetas, 2x 50 Pesetas, 3x 100 Pesetas, PTA 1,404,-, total approx. 144 pieces