tetra tba 19 used for sale

A machine for the production of PET bottles from 0.2L to 2L In good condition, the opportunity to see the bottle maker at work, Complete with mold

; Gross weight [kg]: 10500; Engine: 4012-46TAG3A; Accessories: Tanker, Control Panel; Water Tank Volume [l]: 2000

; Gross weight [kg]: 18160; Engine: Perkins 4012-46TAG3A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 2000

Faceplate, faceplate chuck, four-jaw chuck, facing chuck -Face plate: Chuck size Ø 196 mm -Hole circle: Ø 96 mm -Groove width: 14 mm -Through hole: Ø 20 mm -Weight: 7.2 kg

UNUSED - Size: 980 x 2.200 mm - Unbalance Motors: 2 Pcs. Friedrich FT 95-4-2.2 (1.750 RPM / 0,6 kW) - Stainless steel through - Included: Frame and Rubber springs

; Gross weight [kg]: 2245; Engine: FPT/Iveco NEF67TM4; Accessories: Drip pan, Switching panel, Volt meter, Ampere meter, Hertz meter, Start battery, Exhaust system; Power type: 4000002

; Gross weight [kg]: 2245; Engine: FPT/Iveco NEF67TM4; Accessories: Drip pan, Switching panel, Volt meter, Ampere meter, Hertz meter, Start battery, Exhaust system; Power type: 4000002

Hazar Makina HM624 Transfer Printer Year of construction 2021 Model 600 Print width: 1800 mm Calender cylinder diameter: 625 mm Electrical power: 40 kW. Electrical power in one hour: 18 kW Heating system: Fuel oil (surface heat distribution is even.) Machine control panel: 7 inch LCD PLC system Cooling System: Automatic Resistance power: 30 kW Engine power: 2.2 kW Heat-up time: 70 minutes Sealing clamping and guiding system: Automatic (Pneumatically controlled linear slide) Thermal control of the cylinder: Outer and inner surface checked twice automatically. Print speed: 3-7 meters in minutes Felt: Nomex Condition : Exhibit You can find more printers in other sizes - new and used - in our shop! International shipping costs on request!

Waldrich Siegen Ø 1900 x 7500 mm Distance between centers: 7500 mm Swing over bed: 1900 mm Swing over cross-slide: 1650 mm Power on main spindle: 150 HP

Dodge 1946 Rat Rod Discover the allure of the extraordinary Dodge 1946 Rat Rod, an import from the USA that not only shines as a show car, but also boasts an impressive list of awards in the States. This unique hot rod has conquered the hearts of enthusiasts and can now be admired on European soil with an approval in Belgium. The stunning design of the Dodge 1946 Rat Rod makes it a true eye-catcher on any show stage. With an impressive paint job and a carefully crafted patina, this vehicle exudes character and history. Its numerous awards in the USA highlight the quality of craftsmanship and attention to detail that has gone into the restoration and modification of this exceptional vehicle. Under the hood is a powerful 318 Chrysler engine, which provides impressive performance. The 518 Electronic Overdrive transmission not only provides a smooth ride, but also contributes to effic ...

; Gross weight [kg]: 1020; Engine: Kubota V2203M; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 150

; Gross weight [kg]: 5670; Engine: Volvo TAD1381GE; Accessories: Tanker, Battery, Control Panel, Stahldach

; Gross weight [kg]: 8600; Engine: Perkins 4006-23TAG3A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A

Due to non-use, like new condition. Length max bars 3000 mm Ø max bars 50 mm Multiple spindle Automatic loader Price negotiable

Technical data Work-pieces: from diameter: 0.8 mm up to diameter: 18 mm Length from: 10 - 600 mm Cutting-off wheel diameter: up to: 100 x 1.0 mm Bore: 20 mm Number of cutting-off wheels: 1 x Diameter of grinding wheel: 100 x 50 x 20 mm Spindle speeds: from: 2160 rpm up to: 4450 rpm Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 900 mm Width: 600 mm Height: 1200 mm Various accessories: Coolant system

Used Krauss Maffei 280-1900 C3 Injection moulding machine From 2000 Equipped with Wittmann robot W631-0386/2003 Machines is functional and in production, can be seen anytime by appointment. PDF attached

Bar feeder after repair. All mechanisms diagnosed and inserts replaced in 2022. Machine Parameters: 8 channels max bar length: 3200 mm

; Gross weight [kg]: 800; Engine: Perkins 403D-15; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55

Quadro Comil model 197S conical mill 197S conical mill This machine is as new EX / ATEX 316 ss with RPM display suitable for screening wet or dry powders. The machine has a capacity of 45 - 450 kg/hour depending on the product characteristics and the screen being used. It is driven

Nagema flowpack packer from 1980 Year 1980 Nagema

Chuck diameter: 190mm Infinitely adjustable Foot pedal operation

We sell 1 x IBM 1965-N10 z13 Series System Capacity Marker: E01 In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at a reasonable price from HASCON! The sale is only made to companies. We have available complete systems and components in refurbished conditions from a ...

; Gross weight [kg]: 2900; Engine: Perkins 1206A-E70TTAG3; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 385

; Gross weight [kg]: 1550; Engine: Deutz TD2.9L4-SV; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 250

This Battenfeld BA 3500/1900 BK injection moulding machine was built in the year 2000. It is equipped with a Unilog 4000 control unit. The machine has a clamping force of 3500 kN. See video gallery for more impressions.

This ARZUFFI AM/KW 1DA2 1900/1800 IC MF Other machine was manufactured in the 2013. This machine has a loading system which inside each door is installed a planetary that allows to charge 7 fixtures.

new rear light, incorrectly ordered, from stock

; Gross weight [kg]: 19860; Engine: Perkins 4016-TAG2A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 2000

; Gross weight [kg]: 6800; Engine: Perkins 4006-23TAG2A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1550

; Gross weight [kg]: 4000; Engine: Perkins 2206C-E13TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 450

; Gross weight [kg]: 6200; Engine: Doosan DP222CC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1500

Chuck flange, flange holder, lathe chuck flange, driving flange -Feed flange: Outside: Ø 190 mm -Mounting: thread, dimensions see photos -Dimensions: Ø 190 x 55 mm -Weight: 5.8 kg

Cantilever rack, heavy-duty rack, single-sided cantilever rack, pallet rack -Cantilever rack: one-sided, 5 bays H/W/D 4000/5150/1970 mm -Cantilever arms: 3 levels / shelf height: adjustable -Cantilever arm length: 1970 mm -Arm load: 700 kg / stand load 2100 kg -Total weight: 1700 kg

Cantilever rack, heavy-duty rack, single-sided cantilever rack, pallet rack -Cantilever rack: one-sided, 8 bays H/W/D 5000/8120/1970 mm -Cantilever arms: 4 levels / shelf height: adjustable -Cantilever arm length: 1970 mm -Arm load: 700 kg / stand load 2800 kg -Total weight: 3300 kg

JeppTech cartoning machine Manufacturer: JeppTech Oy ( Finland ) Type: PR 199 Year: 2006 Power: 400 v, 50 Hz, 16 A Air: 6 bar Speed: 28 pcs / min. Leaflet inserter feed

Single needle triple transport long arm sewing machine equipped with: - Thread cutter - Locking - Press base ventilation - Stroke quick adjustment - 2. Stitch length - Frame and table top - LED sewing light - 12 mm stitch length - Servo motor with control panel - electronic handwheel

workpiece diameter: mm workpiece length: mm clamping length: mm

Kramatorsk Model KJ1910 serial number 1913 Swing Over Bed: 1600mm Maximum Workpiece Length: 6300mm Maximum Drilling Diameter: 991mm Spindle power: 125.00kW Spindle Speed: 1 - 320 RPM Infinitely Variable power Existing Additional Chuck workholding range: 200 - 1250mm diameter, workpiece weight capacity using two open roll supports: 60,000kg, size range in closed backrest: 200 - 800mm, size range in open backrest: 630 - 1380mm, pressure head speed range: .125 - 500 infinitely variable, pressure head spindle bore diameter: 182 mm, pressure head motor power: 75kW DC, headstock speed ranges: 3, pressure head speed ranges: 2 Machine Length: 22950mm Machine Width: 4375mm Machine height: 2670mm Weight: 101091kg Condition Good

IRCO Profimat 65.6/196.6

Suitable for cutting fruit and vegetables, speed: 400-600 cycle/h, compressed air supply: 6-8bar.

Suitable for cutting fruit and vegetables, speed: 400-600 cycle/h, compressed air supply: 6-8bar.

Hacksaw machine make BEHRINGER type KS 190 NMasch. -No: 11697052Technical specifications:Cutting range 90 ° round: 190 mm 45 ° round: 140 mm 90 ° / 45 ° square: 160 x 160/140 x 140 mmSaw blade dimensions: 400 x 32 x 1.6 mmNumber of cutting speeds: 2Drive power: 380 V / 50 HzWith- cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

ROBOT ENGEL ERC65 X-axis 800 (EUROMAP standar) Y-axis 1400 Z-axis: 2840 A-axis C-axis 2 x vacuum 3 x gripper - Screw diameter: 60 mm - Shot weight max: 650 g - Injection volume: 769 cm? - Screw L/D ratio: 23 - Ejector stroke / force max.: 250 / mm / kN - Clamping force: 3.500 kN - Mould opening stroke max: 1.300 mm - Mould height max: 920 mm - Mould height min: 380 mm - Daylight between platens max: 1.300 mm - Platen size (h x v): 1.060 x 1.095 mm - Cascades / Sequential valve gates: 6 - Distance between tie-bars (h x v): 710 x 710 mm - Control: MC 4 - Core pulls: 5 - Power: installed max: 55 kW - Dimensions (long x wide x high): 6.500 x 2.100 x 2.380 mm - Weight: 15.500 kg

feed pressure: 250 bar liter capacity: 9 l weight of the machine ca.: 10 kg dimensions of the machine ca.: 1,15x0,4x0,4 m hydraulic gear pump - for more details see photos - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roll grinder machine STANKO XC3 CHS 193 under power, working condition - min. grinding diameter 240 mm - max. grinding diameter 2000 mm - max. workpiece length 6700 mm - grinding wheel diameter 600 mm - workpiece diameter: 2000 mm

Version completely in stainless steel pressure shock resistant up to 1 bar Length 11,150 mm Diameter 3800 mm Filter area 434 m²

Machine type TIG inverter welding system gas-cooled DC and AC system Merkle brand Type LiteTIG 190 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 190 amps Duty cycle 25 % ED at 190 Ampere 60% ED at 140 amps 100% ED at 115 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 150 x 240 mm Weight 7.4 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 24 months warranty 1 piece instruction manual List factory price ex ...