We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,567 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
New screw and barrel for Battenfeld .../1900 injection unit 55 mm diameter complete with heaters and screws in the factory box.
used
; Gross weight [kg]: 2190; Engine: Iveco NEF67TM4.S500; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 390
used
Little used screw for Battenfeld .../1900 injection unit 65 mm diameter
used
Brand ZF Model Gearbox Ratio 4.697:1 Power 452 kW RPM 1800 kW/RPM 0.251 General condition New Condition Features: SAE Housing Controls Weight (kg) 632 Dimensions (cm) 80 x 120 x 130
used
; Gross weight [kg]: 6250; Engine: Doosan DP222LC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1250
used
; Gross weight [kg]: 9780; Engine: `Perkins 4012-46TAG2A; Accessories: Tanker, Control Panel; Water Tank Volume [l]: 2000
used
; Gross weight [kg]: 1950; Engine: Doosan P086TI-1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 224
used
; Power [PS]: 272; Gross weight [kg]: 2350; Engine: Cummins 6CTA8.3-G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 63A - 32A; Water Tank Volume [l]: 285
used
Pink VT 1650-850-1950-14 vacuum tray dryer for a total of 42 trays/inserts with the dimensions of 500 x 800 mm (3 per shelve), usable inner dimensions of the chamber 1710 x 985 x 1950 mm (WxDxH), outer dimensions of the chamber 1940 x 1200 x 2230 mm (WxDxH), 13 shelves with the usable dimensions of 1650 x 850 x 110 mm (WxDxH), total shelf area approx. 19,6 m2, total of 14 shelves including floor, heating medium hot water, heating of the trays/inserts, floor and ceiling, maximum temperature 95 °C, maximum operating pressure vacuum chamber -1/+0.1 bar, maximum operating pressure heating system 3 bar, unladen weight approx. 3700 kg, (2 units available)
used
The scope of delivery includes: 01x Grating, used Material color: hot-dip galvanized Total depth: 990 mm (support rod direction) Total width: 1,195 mm (crossbar direction) Support rod diameter: 40/2.0 mm Frame height: 40 mm Mesh size: 100 x 100 mm Weight: approx. 11.07 kg | Pcs. Internal designation: L Note: Isq02ga - The frame was flanged inwards from all sides. - The gratings can be damaged, scratched, dented, Welding, etc. show. General information about the item: This item is offered for pickup only. In addition, a desired transport or shipment of this article is with additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.
used
The scope of delivery includes: 01x Grating, used Material color: hot-dip galvanized Total depth: 995 mm (support rod direction) Total width: 1,190 mm (crossbar direction) Support rod diameter: 40/2.0 mm Frame height: 40 mm Mesh size: 100 x 100 mm Weight: approx. 11.44 kg | Pcs. Internal designation: K Note: - The frame was flanged inwards from all sides. - The gratings can be damaged, scratched, dented, Welding, etc. show. General information about the item: This item is offered for pickup only. In addition, a desired transport or shipment of this article is with additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.
used
; Gross weight [kg]: 5300; Engine: Volvo TWD1683GE-SV; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger
used
; Gross weight [kg]: 3820; Engine: Volvo TAD882GE-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1800
used
; Gross weight [kg]: 6000; Engine: Volvo TAD1382GE-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1000
used
; Gross weight [kg]: 1600; Engine: Deutz TCD2.9L4-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 250
used
; Gross weight [kg]: 3100; Engine: Deutz TCD6.1L6-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1100
used
Dimensions changed as of February 2023, to 2540x1140x1647 (spec sheet shows old dimensions); Gross weight [kg]: 1400; Engine: Deutz TD2.2L3-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 150
used
; Gross weight [kg]: 1500; Engine: Kohler KDI2504TCRCAC-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 250
used
; Gross weight [kg]: 2960; Engine: Iveco F5MGL415A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1100
new
range L-W-H: 780x480x105 mm weight: 79,5 kg : 7 St. Tool trolley filled with: 3 pcs. Different socket sets, double end wrench, Double ended ring spanners, wrenches, pliers different, Screwdrivers, Allen screwdrivers, files, hammersSaw, etc. Tool Steel: Chrome Vanadium 5 pcs. Drawers filled with tools 2 pcs. Drawers empty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
range L-W-H: 780x480x105 mm weight: 79,5 kg : 7 St. Tool trolley filled with: 3 pcs. Different socket sets, double end wrench, Double ended ring spanners, wrenches, pliers different, Screwdrivers, Allen screwdrivers, files, hammersSaw, etc. Tool Steel: Chrome Vanadium 5 pcs. Drawers filled with tools 2 pcs. Drawers empty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 200 t stroke: 300 mm table surface area: 1900 x 440 mm column travel between the guideways: 1900 mm working feed: 5,0 mm/sec engine output: 15,0 kW weight of the machine ca.: 4.800 kg. range L-W-H: 2.570 x 1.665 x 2.860 mm Furnishing: - hydraulic workshop press with adjustable cylinder - Table height adjustment - V-block tool insert - Pressure gauge The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
length: 685 mm width: 460 mm height: 115 mm T-slot - width: 10 mm T-slots: 3 Stück Payload: 40,0 kg width: 315 mm length: 340 mm travel -x axis: 285 mm travel -y axis: 140 mm manual control device: 0,04 Nonius mm weight: 45,0 kg Properties: for light milling work on table or crevice drilling machines Ground clamping surface Dovetail guide adjustable by means of wedge lines The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
number: 21 Positionen weight: 22 kg condition: neu 0 4 pcs. Clamping clamping height 300mm, variable projection 6 pcs. Clamping bolts 4 pcs. Stop 150mm 2 pcs. Stop and clamping angle 175mm 1 pc. Burner holder 1 pc. Anti-stick spray 500ml 1 pc. Welding table cleaner on a natural, biological basis The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
diameter: 35 - max. 65 mm Guide channels: 6 control: SPS max. bar length: 3.200 mm bar material dia.: min. 35 mm bar material dia.: max. 65 mm total power requirement: 2 kW weight of the machine ca.: 2,0 t dimensions of the machine ca.: 4,0 x 1,1 x 1,6 m Multi-Channel-Bar-Feeding-System BREUNING IRCO - 65.6 196.6 - has been installed at a Mori Seiki ZL 200 SMC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 1950 mm : 950 mm : 400 mm : 4 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
plug -Type: 192 009 -Number: 40x available -Price: complete -Weight: 0.5 kg
used
Power supply, converter, converter, power supply unit -Type: PE 1980/20 U -Input: 220 VAC -Output: 5 VDC 200A -Dimensions: 200/320/H130 mm -Weight: 8.5 kg
used
Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 195 mm -interchangeable jaws -Weight: 12 kg
used
alternator -Type: 0986 031 190 -28 V -Weight: 5 kg
used
Drum motor, belt grinder, belt sander -Spare part for: HUSBAND grinding machines -Drum: Ø 194 mm -Drum length: 460 mm -Speed: 2800 rpm -Power: 4.4 kW -Shaft mount: Ø 30 mm -Also other sizes available in stock -Weight: 74 kg
used
Drum motor, belt grinder, belt sander -Spare part for: Ehemann grinding machines -Drum: Ø 196 mm -Drum length: 465 mm -Speed: 2800 rpm -Power: 4.4 kW -Shaft mount: Ø 30 mm -Also other sizes available in stock -Weight: 78 kg
used
Drum motor, belt grinder, belt sander -Spare part for: Ehemann grinding machines -Drum: Ø 199 mm -Drum length: 384 mm -Speed: 2800 rpm -Power: 2.2 kW -Shaft mount: Ø 30 mm -Also available in other sizes -Weight: 67 kg
used
Knife disinfection machine, knife disinfection device -GENO: dishwasher 1988 -Metal case with: accessories see photo -Dimensions: 510/410/H210 mm -Weight: 19.5 kg
used
Control cabinet, distribution cabinet, control cabinet, TS modular cabinet, profile door -Side door -Dimensions: 1980/635/H40 mm -Weight: 26 kg
used
Clamping angle, clamping aid -Clamping angle for: workpiece clamping -Thickness: 35 mm -Bores: Ø 10/20 mm -Dimensions: 555/160/H250 mm -Weight: 55 kg
used
Clamping angle, clamping aid, -Clamping angle for: workpiece clamping -Thickness: 31/40 mm -Bores: Ø 13 mm -Thread: M12 -Price: per piece -Number: 2 pieces -Dimensions: 475/195/H195 mm -Weight: 52 kg
used
Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 190 mm -Passage: Ø 57 mm -Weight: 10 kg
used
Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 195 mm -Passage: Ø 62 mm -Weight: 9 kg
used
Rotary table, rotary indexing table, dividing head, dividing head -Three-jaw chuck: Ø 190 mm -Height: 195 mm -Bore center: Ø 57 mm -Dimensions: 355/200/H245 mm -Weight: 42 kg
used
Rotary table, rotary indexing table, dividing head, dividing head -Three-jaw chuck: Ø 190 mm -Height: 195 mm -Bore center: Ø 57/40 mm -Dimensions: 310/220/H195 mm -Weight: 28 kg
used
Machine vise, sturdy vise, drill vise -Jaw width: 200 mm -Back height: 58 mm -Clamping depth: max. 190 mm -Number: 1x vices available -Price: per piece -Dimensions: 520/280/H155 mm -Weight: 55 kg
used
Bezel, stick, lynette -Max. Passage: Ø 190 mm -Tip height: 390 mm -Edition: ball bearing rollers -Technical drawing: in the photos -Number: 1x bezel available -Price: per piece -Dimensions: 600/140/H800 mm -Weight: 79 kg
used
Clamping angle for workpiece clamping -Dimensions: 196/80/H100 mm -Thickness: 12 mm -T-slots: 8 mm -Surface: milled -Weight: 3 kg
used
Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 195 mm -with: T slot 10 mm -Thread intake pitch: 3 mm -Weight: 5.7 kg
used
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 51 mm -Outer: Ø 190 mm -Width: 32 mm -Price: per piece -Number: 1x available -Weight: 1.4 kg
used
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 189 mm -Width: 16 mm -Price: per piece -Number: 1x available -Weight: 1.1 kg
used
TYPE : G6200 S 190 N8 SP - SPECIAL EXECUTION FOR CARBON OR TECHICAL FABRIC WEAVING 8 COLOR, WITH STAUBLI DOBBY 2617 WW : 190CM SERIAL NO. : 1056 ACCESSORIES : CREEL WITH 192 POSITIONS , BY CMG , YOC 2010 DUST SUCTION UNIT 4 FRAMES 4 PREWINDERS IRO ORION BATCHING MOTION
used
Battenfeld TM3500/1900 Injection moulding machine Used battenfeld machine for sale, machine is unplugged, but it was in good working condition
used
Krauss Maffei KM90/50-190 CD injection molding machine The machine was working in a CD production line