tetra pak tba used for sale

Equipment: Insulation,Manufacturer: Tetra Pak Processing,Condition: used,Other: 8 minutes Hot holding Pipes DN 80 Length: 647 meters Manufacturer: Tetra Pak Weight approx. 7 t ,Remarks: Wall thickness of the pipes 2mm (1.7mm in the bend area) 6 height-adjustable feet Smaller dents in the insulation jacket Insulation jacket is no longer present in 2 parts (see photos),last use: dairy,Nameplate: No,Insulation: available,material insulating jacket: stainless steel,material pipes: AISI304 (V2A) 1.4301,total height: 3.200,total width: 1.550,total length: 6.530

Description Item # 9312 - HOMOGENISER Manufactured by TETRA PAK Model Tetra Alex 20 Year 2001 Standard 2-Stage Machine 30kW Motor Single Speed Originally designed to run at 160bar up to around 5000litres per hour

The Tetra Pak Almix - Scanima Pilot Plant Mixer SPM-100 is a versatile vacuum processing system designed for pilot plants, product development and small-scale industrial production. It combines vacuum mixing, powder induction, high-shear homogenisation, heating, cooling and automated recipe control into one compact unit, making it ideal for producing a wide range of dairy, beverage and food products.The mixer is equipped with an integrated vacuum system that creates a controlled vacuum inside the vessel before and during processing. Operating under vacuum significantly improves powder incorporation by eliminating air, reducing foam formation and preventing oxidation. Powders such as milk powder, proteins, starches, sugar, cocoa, stabilisers and emulsifiers are drawn directly into the liquid through the integrated powder funnel, ensuring rapid wetting and lump-free dispersion while minimi ...

Used Bag in Box Filling Line (Manual Operation.) Filling volume 5-20ltr. Pre-made bags with sealing plugs Manual bag feeding, automatic removal of the sealing plug and re-insertion after filling. Capacity: 400-500 Bags/ shift (8 h) Year of construction. 2013, out of service since May 2025 Included: - CIP preparation - Hot glue auton ́mat with glue guns - Ink-jet encoder - Various pipelines, valves, conveyor belts and platforms. Note! the stainless steel tank shown at image is not included in delivery Disassembly by the buyer.

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

Used BUCHER tube-in-tube flash pasteurizer 12000 L/hTechnical Specifications & Performance DataThis tube-in-tube flash pasteurizer delivers reliable thermal treatment for high-quality beverage production. Manufactured by Bucher Unipektin, model PWAP 12000-S, the unit is designed for continuous, hygienic operation with minimal product degradation. Its robust stainless steel construction and compact skid-mounted layout simplify installation and integration into existing processing or used bottling line environments.Manufacturer: Bucher UnipektinModel: PWAP 12000-SMachine type: Tube-in-tube flash pasteurizerYear: 2016Capacity: 10,000–12,000 l/hHeat exchanger: Tube-in-tube designConstruction: Stainless steel, skid-mounted frameControl: Touchscreen HMI control panelIncluded components: Product feed pump, holding tubeSanitation: CIP-ready configurationPrevious product history: Apple juice /  ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

If you are looking for a reliable and quick response contact for your spare parts, at Dairy Machinery UK we offer a large variety of Spare Parts for the below manufactures. Keeping our ongoing assistance with our customers we have achieved best prices for genuine Spare Parts Directly From Manufactures ., Spare parts from these manufacturers, Alfa Laval Spare Parts, Tetra Pak Spare Parts, GEA Westfalia Spare Parts, GEA Tuchenhagen Spare Parts, GEA Hilge Spare Parts, GEA Niro Soavi Spare Parts, GEA Aseptomag Spare Parts, Fristam Spare Parts, Pentair Südmo Spare Parts, APV Gaulin Spare Parts, APV Rannie Spare Parts, SPX Spare Parts, Stephan Spare Parts, Karl Schnell Spare Parts, Benhil Spare Parts, Corrazza Spare Parts, Trepko Spare Parts, Ilpra Spare Parts, Grundfoss Spare Parts, Lowara Spare Parts, Arsopi Spare Parts, HST Spare Parts, Buschjost Spare Parts, Samson Spare Parts, Sumitomo S ...

The Tetra Pak TA 20 homogeniser is a type of machinery used in the food and beverage industry, primarily for the homogenization process of liquid products. Homogenization is a mechanical process that breaks down fat globules in liquid products to create a uniform and stable emulsion. This process is crucial in the production of products like milk, cream, and fruit juices, improving their texture, stability, and mouthfeel., Key Features of the Tetra Pak TA 20 Homogeniser:, - Design and Capacity: The TA 20 is designed for medium-scale production, capable of handling various flow rates depending on the application. It typically supports a wide range of products., - Versatility: This homogeniser can be used for a variety of dairy and non-dairy applications, including milk, cream, yogurt, beverages, and sauces., - High Efficiency: It offers efficient homogenization with adjustable pressure se ...

The Tetra Pak Frigus 600 ice cream freezer is a specialized machine designed for the production and continuous freezing of ice cream and other frozen desserts. It plays a crucial role in the ice cream manufacturing process, ensuring the product reaches the desired temperature and texture while incorporating air to create a light and creamy consistency., Key Features of the Tetra Pak Frigus 600 Ice Cream Freezer:, - High Capacity: The Frigus 600 is designed to handle significant production volumes, making it suitable for medium to large-scale ice cream production., - Continuous Freezing Process: This machine allows for a continuous freezing process, which is essential for maintaining the texture and quality of ice cream. It helps achieve the right balance of air incorporation (overrun) and uniform freezing., - Precise Temperature Control: The Frigus 600 offers precise temperature and visc ...

USED TETRA PAK REX TR27 ASEPTIC FILLING AND CAPPING COMPLETE LINE FOR SALE YEAR 2016 Item #: Usm-245 Category Tetra Pak Rex USED TETRA REX TR/27 Complete Filling and Capping Line For Sale 500ml and 1000ml: 1-USED TETRA PAK ASEPTIC REX TR/27 Complete Filling and Capping Line For Sale YEAR OF MANUFACTURING 2016, Filling Size: 500ml and 1000ml PACK SHAPE ; GABLE TOP or Tetra Rex SPEED: 7000 PACKS PER HOUR ASEPTIC FILLING FOR LONG LIFE PRODUCTS 2-Tetra Pak Tray Machine, Cardboard Packer 32 by Tetra Pak, Wrap Around, Formats: 23, 43, YEAR OF MANUFACTURING 2016 3-Conveyors: Type: Conveyor Control System and Easy Ride and Long Conveyors Condition: Excellent and Tetra Pak Maintained

USED TETRA PAK CAP APPLICATOR 30 FLEX FOR HELICAP 23 FOR SALE YEAR 2014 Item #: Usm-244 Category Cap Applicator USED TETRA PAK CAP APPLICATOR 30 FLEX FOR HELICAP 23 FOR SALE YEAR 2014 Tetra Pak Cap Applicator, Cap Flex 30 For helicap 23, Year of manufacturing 2014, version 300v with cap feeder Condition: Excellent

TETRA PAK TR28 REX FILLING LINE FOR SALE YEAR 2021 Item #: Usm-257 Category Tetra Pak Rex Tetra Pak Filling Line – TR/28 General Information Manufacturer: Tetra Pak Machine Type: TR/28 carton filling machine Year of Manufacture: 2021 Country of Assembly: Sweden Performance & Capacity Configuration: Dual-lane filler Output per lane: approx. 7,000 packs/hour Total output: approx. 14,000 packs/hour Filling formats: 500 ml cartons 1,000 ml cartons Operating & Technical Data Operating hours (last service reference): approx. 5,455 hours Preventive maintenance completed (latest service): full service including 166 maintenance tasks System includes: Filling system Sterile air system Cleaning/CIP system Carton sterilization system Condition Regular preventive maintenance performed Latest service completed successfully (service complete”) Minor outstanding tasks  ...

USED A3 SPEED 250ML BASE LEAF FILLING LINE FOR SALE YEAR 2010 Item #: Usm-249 Category Tetra Pak A3 Speed A3 Speed 250ml Base Leaf with DIMC Cap in Mold, VCK Change from 125ml to 250ml Base Leaf in 2020, DIMC installed in 2020, Version 300v, Working Hours 33485, Speed 24000 Packs per Hour, Tetra Tray Shrink 51, Year of manufacturing 2010 Conveyors Filling Machine, PC-23 with chain 29 meter, Drive unit 4 pcs, Bend 90 X 4 pcs Conveyors TTS-51, UC-24 with chain 6 meter Condition: Tetra Pak Maintained.

USED TETRA PAK A1 TWA 180ML ULTRA WEDGE FILLING LINE FOR SALE YEAR 2019 Item #: Usm-250 Category Tetra Pak A1 A1 TWA 180ml Ultra wedge filling line, year of manufacturing 2019, version 1000v, speed 10000 packs per hour. with straw applicator ,Packer, conveyors and paper trolly.

REFURBISHED TETRA PAK CAP FLEX 30 THE CAP APPLICATOR FOR HELICAP 23 YEAR 2014 Item #: Usm-258 Category Cap Applicator Refurbished Cap Flex 30 For helicap 23 Year of Manufacturing 2014

Frame top part for a Separator, Ra 3,2 and Ra 6,3. Tetra Pak Eco direct drive or new type B2 Separators. Tetra Pak article number: 581477 80. For example for a Tetra Pak D70 Eco model., Type of Machine: Frame top part, Condition: Unused, Weight: 375 kg

Unused disc stack with distributor and 133x Discs for a Tetra Pak D MRPX 407 SGP-34 Separator / Clarifier., - Distributor, part no: 516763 80, 1 piece., - Bowl disc, part no: 516888 88, 1 piece., - Bowl disc, part no: 516888 89, 132 pieces., Type of Machine: Disc stack, Distributor: Yes, Number of discs: 133x, Condition: Unused

Unused disc stack with distributor and 528x Discs for a Tetra Pak D 610 HGD-34C Separator / Clarifier., 1x complete set:, - Distributor, part no: 553341 80, 1 piece., - Bottom disc, caulks 0,4 mm, part no: 549632 81, 1 piece., - Bottom disc, caulks 0,4 mm, part no: 549632 80, 180 pieces., Loose delivered discs:, - Bottom disc, caulks 1,2 mm, part no: 549632 85, 2 pieces., - Disc, caulks 0,4 mm, part no: 549632 80, 180 pieces., - Disc, caulks 1,2 mm, part no: 549632 84, 165 pieces., Type of Machine: Disc stack, Distributor: Yes, Number of discs: 528x

Unused disc stack with distributor and 145x Discs for a Tetra Pak A 610 HGD-14C Butteroil Separator., - Distributor, part no: 561191 80, 1 piece., - Bottom disc, part no: 546897 88, 1 piece., - Bowl disc, part no: 546897 86, 33 pieces., - Bowl disc, part no: 546897 87, 96 pieces., - Bowl disc, part no: 546897 87, 2 pieces., - Bowl disc, part no: 546897 86, 12 pieces., - Top disc, part no: 561193 01, 1 piece., Type of Machine: Disc stack, Distributor: Yes, Number of discs: 145x, Condition: Unused

Milk pasteurisation line of 8.000 ltr/h, used in a quark production factory. Line existing out of open level tank with lid (100 liter), product pump (Fristam), plate heat exchanger (Tetra Pak / Alfa Laval C6-SR, year: 2018, serial nr: 30108-17714, volume: 114 liter, pressure: 0 / 10.0 bar, temperature: 0 / 140 °C, 4 sections, number of plates: 156 in total devided in 48-16-48-48), holding tube in tank, booster pump (Fristam) system to get more pressure on the raw milk side compare to the pasteurised milk side and product and steam valves. Line CIP cleanable. Indirect hotwater set by heating of steam, closed loop with circulation pump (Fristam). Components available, no piping or controls for the pasteurisation plant itself., Addtional features:, - Was running together with the Rannie 50.79, #1598, .hamburg-machinery/listings/9063938-used-high-pressure-homogeniser-ran nie-blue-top-50-79. ...

A filling machine with packer is available, 1) Filling machine Shikoku Kakoki S-PS65UC, compressed air connection: 588-882kPa, compressed air consumption: 1,300Nl/min, electrical connection: 148A, operating hours: 56,823h, suitable for milk, yogurt, fruit yogurt and similar products, 2) Packaging machine Tetra Pak TETRA CARDBOARD PACKER 70, wrap-around carton formats: 250, 500, 1000ml, year of manufacture: 2004, an on-site inspection is possible.

The Tetra Pak Tetra Alex Modified” 25 (TAM25/160BAR) is an industrial, three-cylinder high-pressure homogeniser designed for the homogenisation of milk and other liquid food products. The machine has a maximum design capacity of up to 12.600 litres per hour at a maximum pressure of 160 bar. With the currently installed motor, the capacity is set at approximately 10,000 litres per hour at 160 bar., The homogeniser is equipped with a two-stage homogenisation system featuring mushroom-type valve cylinders, ensuring efficient and consistent product homogenisation. The operating pressure can be hydraulically adjusted via the controls on the front panel. Pressure gauges are installed for monitoring the operating pressure. The machine features a stainless steel-clad exterior and an integrated oil pumping system for lubrication. It is driven by a 55 kW electric motor and supplied with a contro ...

Tetra Pak ​​​​​​​​​​​​Tetra Therm Aseptic VTIS line with Tetra Alex TA400 homogeniser. Aseptic processing unit for continuous UHT treatment with direct steam injection. Mainly for heat-sensitive low-acid products such as milk, enriched milk, cream, soy milk, formulated dairy products, ice-cream mix, dairy desserts as well as ESL (extended shelf life) products. Previously used in a milk factory in Europe., The unit is fully automated to safeguard the aseptic status while in production. The operation can be divided into four steps:, - Pre-sterilization, - Production, - Aseptic intermediate cleaning (AIC), - Cleaning in place (CIP), Before production can start, it is necessary to sterilize the aseptic area by circulating pressurized hot water. After sterilization, the unit is cooled down to production temperature. Finally, sterile water is circulated through the prod ...

Tetra Pak Tetra Alex 2 (TA2/200BAR) high-pressure homogeniser, designed for the homogenisation of milk, dairy products and other liquid food products., The machine is equipped with a 3-cylinder homogenising block and a single-stage homogenisation system with mushroom-type valves. The maximum design capacity is up to 6,500 litres per hour at a maximum pressure of 160 bar. With the currently installed 30 kW motor, the machine is configured for a capacity of approximately 4.000 litres per hour at an operating pressure of up to 200 bar with a piston diameter of 40 mm. The homogeniser is equipped with hydraulically operated pressure-setting valves, mounted on the side panel, allowing adjustment of the homogenisation pressure. A pressure gauge is installed to monitor operating pressure and pulsation dampers are ensure smooth product flow. The machine also features an integrated oil pumping sys ...

Complete skid-mounted Tetra Pak Tetra Alcross Bactocatch MB Microfiltration (MF) plant, type 1 x M74 / 1 x M19, manufactured in 2011 and specifically designed for hygienic dairy processing applications., The Tetra Alcross Bactocatch system is designed for the highly efficient removal of bacteria and bacterial spores from milk by means of ceramic membrane microfiltration combined with High Temperature Treatment (HTT) of the cream fraction. The process can achieve a bacterial and spore reduction of up to 99.9999%, depending on the product and operating conditions., The fully skid-mounted installation is designed for continuous microfiltration of milk and is suitable for applications including the reduction and removal of bacteria and spores from skim milk, cheese milk and ESL milk, as well as protein fractionation. The plant was previously operated for the treatment of skim milk for the re ...

HAMBA BK 8006-P Ultra-Clean Cup Filling and Sealing Machine, The HAMBA BK 8006-P is a high-performance, fully automatic, linear multi-lane cup filling and sealing machine engineered for the precise packaging of dairy, dessert, and liquid food products. Built to rigorous German engineering standards, this system combines exceptional throughput with advanced Ultra-Clean hygienic technology, ensuring extended product shelf life and uncompromising safety., Key Performance Capabilities, - High-Speed Output: Delivers high-volume production capacities reaching up to approximately 12,000 cups per hour (depending on container dimensions and product viscosity)., - Multi-Lane Linear Efficiency: Utilizes a space-saving, index-motion linear conveyor system for continuous, stable container handling., - Precise Multi-Component Dosing: Configured to accurately portion multi-layer products, making it ide ...

The Tetra Pak Cardboard Packer 70 is a packaging machine designed specifically for assembling and closing cardboard cartons for liquid products. Here are its key features and functions:, - Automated Carton Handling: The Cardboard Packer 70 automates the process of forming and sealing cartons, which helps to enhance efficiency and reduce labor costs in packaging operations., - High Capacity: This machine is designed for high throughput, allowing producers to pack a large volume of products in a relatively short time., - Versatile Carton Formats: It can handle various sizes and formats of cartons, accommodating different product packaging needs and adapting to market demands., - Compact Design: Its design is usually space-efficient, making it suitable for various production line layouts without requiring extensive floor space., - Quality Sealing: The machine ensures that cartons are secure ...

The power encoder cable for Tetra Pak systems plays a vital role in the operation and monitoring of various equipment within the Tetra Pak machinery, particularly in processes like filling and packing. Here are some key features and details regarding power encoder cables used in Tetra Pak systems:, Key Features of Power Encoder Cables:, - Function: The power encoder cable connects the encoder to the control system, allowing for the transmission of signals that monitor the position and speed of moving parts in the machinery., - Signal Transmission: These cables are designed to carry data signals related to rotational positioning, helping ensure that machines operate accurately and efficiently., - Durability: Power encoder cables are built to endure the rigorous conditions within Tetra Pak machinery, including exposure to moisture, variable temperatures, and physical wear. They are often m ...

The Fogg Monoblock Filler is a type of packaging machine designed for filling and capping bottles, typically used in industries like beverages, pharmaceuticals, and cosmetics. Here’s a brief description:, Features:, - Monoblock Design: Combines filling and capping processes in a single machine, enhancing efficiency and reducing the footprint on the production line., - Suitable for 38mm Caps: Specifically designed to accommodate 38mm diameter caps, which are commonly used in various bottle types., - Filling Mechanism: Utilizes a volumetric or gravimetric filling system to ensure accurate liquid filling, essential for maintaining product integrity and compliance with regulatory standards., - Speed and Efficiency: Capable of high-speed filling and capping, improving overall production throughput., - Versatile: Can handle various liquid types, from water to thicker, more viscous products d ...

Used Tetra Pak dual-mode pasteurizer, 10 ton - Year 2014Technical Specifications & Performance DataThe Tetra Therm Lacta pasteurizer is designed for continuous thermal treatment in dairy processing and beverage production. This industrial pasteurization system is configured for yogurt and pure milk applications, supporting controlled heat treatment before subsequent processing, filling, or packaging operations.Model: Tetra Therm LactaYear: 2014Production capacity: 10 tonnes/hHolding time: 285 seconds for yogurt pasteurizationPlate heat exchanger: Tetra PlexHeat exchanger design pressure: 10 BAR on both circuitsHeat exchanger design temperature: 150 °C on both circuitsHeat exchanger test pressure: 13 BAR on both circuitsAdvanced Automation & Control SystemsThe pasteurizer is built around a continuous thermal process in which product flow, heating and holding stages must operate in coordi ...

2-station machine, Preform silo, - guide and - set-up. For an extra price: compressor + moulds. Power up to 2900 bottles/hour

PET stretching / blowing machine, up to 3000 bottles / hour, incl. preform bunkers, conveyors and feeders. Available for an additional charge: moulds for 0.3-2 l., compressor and cooling unit

Blow volume 0.2 - 10.0 ltr. Capacity: up to 1200 bottles/hour NEW MACHINE, 1-station machine, incl. preform bunker and feeder. Gergen Supplement: Compressor, refrigeration unit and moulds

Blow volume 0.2-2.0 ltr. PET stretch blower, 3 blow stations, capacity: up to approx. 3,600 bottles / h. Incl. preform bunker, lift and sorter, Available at extra cost: compressor, cooler and moulds

1 of used beverage carbonator, make TetraPak, type Alcarb Spark, new 2010, capacity 45.000 lph at 10 g/l. With pump, CO2 injector, Endress & Hauser flowmeters, valves, Siemens S7 plc controls, Danfoss VFDs, holding tank 9.959 L (8.000 L net), etc. Ask for further details.

Pilot plant with 3x used Tetra Laval Food - Schroder Kombinator VWK01/60-400 Scraped Surface Heat Exchangers (SSHE) for heating and/or cooling of liquid, viscous, high viscous and crystalline products. 1x used for heating, 1x used for cooling with city water and 1x used for cooling with R22 (Freon). 3x independent motors with mechanical variators for adjusting the speed. Hotwater preparation unit. Stainless steel control panel with relays controls, 3x Ampere meters, Temperature control unit, controls for feedpump and cleaningpump (pumps itself excluded). Cooling compressor (R22 Freon). Power: 380 Volt - 50 Hz - 3 Ph - 31 A. Manual available., Capacity: 20 - 100 kg/h (depending on product / trial specifications), Max. working pressure: Up to 25 bar, Cooling medium: R22 (Freon), Total Power Consumption: 380 Volt - 50 Hz - 3 Ph - 31 A, Dimensions: 240 x 140 x 200 cm, Weight: 1.000 kg

Tetra Laval Food vacuum bowl cutter with lifter for 200 liter meat bins and ejector, type: VSM500, serial number: 288/162, year of construction: 1995, 400 V, 3 Ph, 50 Hz, 400 A, s/s bowl, volume: 500 liter, dimensions: 4720 mm x 3180 mm x 2150 mm. Including Busch vacuum pump, type: 400-212.2709, dimensions: 1550 mm x 820 mm x 1600 mm.

The TRE PAK DIM Cap Applicator is a specialized piece of equipment used in the packaging industry for applying caps to various types of containers. Here are some of its key functions and features:, - Automated Cap Application: The DIM Cap Applicator automates the capping process, ensuring that caps are applied quickly and uniformly across a production line. This reduces labor costs and increases efficiency., - Versatility: This machine can handle a variety of cap styles and container shapes, making it suitable for different product lines in food, beverage, pharmaceutical, and cosmetic industries., - Precision Control: The applicator is designed to apply caps with accurate torque settings, which ensures that caps are not over-tightened (which can lead to damage) or under-tightened (which can result in leaks)., - Integration Capability: The DIM Cap Applicator can be seamlessly integrated i ...

Cardboard dimensions L min/max 200/650 mm W min/max 150/450 mm, H min/max 120/500 mm Working height 680 mm, format to be adjusted via hand crank, Folding the 4 floor flaps pneumatic operation 6 bar air Power 5-7 cycles /min - product-dependent

R25187/17 PASQUINI & KROMER label machine model: Pakromat 250 S/2 age: 1999 about 1500 working hours available: immediately dimension: length: 3,5 m, height :2,10 m, depth ca. 1,7 m permanently maintained Available: sofort

cutting range for steel to: 76 mm capacity at 100%: 51 mm cutting medium: 400 Amp regulated drive: 50-150 und 100 - 400 AmpSteuerSteuer control voltage: 24 Volt weight of the machine ca.: 750 kg dimensions of the machine ca.: 82 x 122 x 930 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Used case Packer Sacmi Pakim Robotik: Year: 2006 Condition: As Is Used case Packer Sacmi Pakim Robotik Year: 2006 Speed: 13.000 bph (36 boxes/minute) Model: robotik Adjustable head Bottle formats: Minimum 0.375 l Max 1.5 l Box formats: Box for 6 bottles. Box for 12 bottles. Safety protections Code: JL 255 More details: https://bottlingscout.com

SPECIFICATIONS: Membrane press for gluing doors, curves and other wooden elements Dimensions mm: 2400 x 1120 Heating by electrical resistance Complete with decompressor, timer and tarpaulins

Manual slicer with integrated packaging module KUCHLER S.A.M. 300 psh + foil machine + packer Specifications: Type slicer: SAM 300 Psh T Type film dispenser: SAM IL - 4 - 220 Airless Type Packer: SAM T 26 230 volts / 50 Hz / 3.24 A Year of construction: 2010/2011 Film size: 21 x 26 & 21 x 22 cm several layers on top of each other can be welded Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 300 mm Stainless steel knife, Teflon coated Luminous flux Function tested, machine immediately ready for use! Condition, see original pictures! If you have any questions, email or call.

Carruthers Six-pak 46000 Six station volumetric filler Serial: 46025 Stainless, Six station rotary volumetric filler, HMI touch screen controls, designed for cans or jars, 3Ph

Carruthers Six-pak 46000 Six station volumetric filler Serial: 46026 Stainless, Six station rotary volumetric filler, HMI touch screen controls, designed for cans or jars, 3Ph

Used line for packing product into cups by FDPm type PAK 2LTF. New 2015. Power supply 3 x 400 V Power 6.5 kW Pressure 6-8 bar Weight 3400 kg Technical specifications: 1. the control of the machine is supervised from the control panel Mitsubishi controller. The machine operates in an automatic cycle. The controller has the following operating programmes: - automatic operation mode with control of the product level in the tank - presence of packages - cyclic operation mode - one cycle - dose regulation The control system switches off the dispensers in the following cases: - lack of pressure - opening of covers - lack of packaging The control system is also equipped with: - visual and acoustic signalling of the operating state 2. Control cabinet - IP 65, located inside the unit, equipped with ventilation and a heat sink. In addition, the electrical cabinet an ...

ECONO PAK FA-KT and WVE-DR-R + 1-head folding carton display hotmelt (2 adhesive spots) + Angle Sealer + SIMATIC OP7 HMI + Nordson hotmelt 3400V-2GAV4D/R hot melt machine incl. hand glue gun + Handheld control unit + Videojet 2-line for coding + 3 stamp formats / sets available: 188 x 150 x 50 mm // 188 x 140 x 90 mm // 189 x 150 x 140 mm + Built in 2003 + Good used condition WITHOUT checkweigher Folding carton conveyors

Used packer by Techmar type PAK-5.0. New 2006. Packer for kefir. Weight 750 kg. Pressure 8 bar. Power 1.8 kW. Power supply 400 V.