132,110 used machines on RESALE, but how to find them? Machine Search
ELB - SWN 5 VA II Surface Grinding Machine -Grinding range X/Y/Z 525x375x255mm -Magnetic plate 700x300mm -Table clamping surface 900x250mm -Table longitudinal stroke 10-625mm -Table load max. 280Kg -Table feed 1-30 m/min -Pendulum grinding 3-30 m/min -Distance - table to spindle center 525mm -Vertical feed speed 2-180 mm/min - Feed size - adjustable 0.001-2mm -Grinding wheel speed 3000 rpm -Coolant device -Machine feet -Documentation -COMPLETE TECHNICAL DATA SEE PHOTOS Dimensions: LxWxH 2.7x2.2x2 meters / Weight 3500Kg
Surface Grinding Machine ELB SWB06-VAII -Grinding length 600mm -Grinding width 500mm -Spindle speed 1400/2800 rpm -Z - Delivery / Automatic / Manual -Y - Delivery / Automatic / Manual -Grinding Movement / Automatic / Manual - Magnet size 600x500mm -Automatic delivery -Grinding wheels - Pulling device -Grinding wheel diameter max. 300mm -Coolant device -Drive cable approx. 6 KW Dimensions: LxWxH 2.6x2.2x2.5 meters / Weight 3500Kg
Tool Milling Machine Deckel FP2E -Extremely smooth running + fully functional -Automatic feeds + rapid traverse in X + Z axis -Machine with sliding head means larger Y-travel -Travel X/Y/Z 400x200x400mm -Speed range 40-2000 rpm -Tool holder ISO 40 -Vertical horizontal milling device -Vertical head swivel with drilling quill -Angle table -Various tool holders -Documentation Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight 1500Kg
Gillardon GB16 Column Drill -Drilling capacity 22mm -Tool holder adapted to MK 3 -Quill stroke 120mm -Stand projection 250mm -Distance from spindle table (min./max.) 30/380mm -Spindle speeds 400-2500 rpm -Power 0.37 kW Dimensions: LxWxH 0.7x0.7x1.8 meters / Weight 400Kg
JUNG D22 / Internal Cylindrical Grinding Machine -Machine suitable for inner round + surface grinding -Smallest grindable bore 14mm -Largest grindable bore 150mm -Grinding length without face grinding device 250mm -Grinding length with face grinding device -6x workpiece speeds 46-270 rpm -Spindle box right/left swivel 30 degrees -Distance of the spindle axis over the center of the table 250mm -Largest workpiece spindle/grinding support distance 935mm -Spindle box / inclined position 30 degrees each -Work table / tilt forward/backward 5 degrees each -Hand/automatic operation -Taper grinding device -Bezel -Three-jaw chuck -Replacement grinding spindles
Mass finishing machine / WALTHER CC315 incl. control system -Model CC315 -Speed range 945-1445 rpm -Separate control/on/off/timer etc. -Soundproof cover -Waste water cover Dimensions: LxWxH 2x1.6x1.6 meters / Weight 850Kg
General SKUR0331 MakeBüter Hebetechnik GmbH (D) LocationBarneveld TypeH 11-06 Main Features MaterialMild steel Motor1.5 KW Height600 mm Specified Features - Lifting/tilting machine MaterialMild steel Lifting machinecheck Max. weight1100 Kg Lifting height0,6 M Hydraulic drivecheck With hydraulic unitcheck Motor1,5 kW 400 Volt Information No.A 11 11720 Year of construction2012 Floorspace2,5x1,6 M Total height0,7 M Weight750 KgLifting/tilting machinesBüter Hebetechnik GmbHConveying systems > Lifting/tilting machinesBrand > Büter Hebetechnik GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKUR0330 MakeBüter Hebetechnik GmbH (D) LocationBarneveld TypeH 11-06 Main Features MaterialMild steel Motor1.5 KW Height600 mm Specified Features - Lifting/tilting machine MaterialMild steel Lifting machinecheck Max. weight1100 Kg Lifting height0,6 M Hydraulic drivecheck With hydraulic unitcheck Motor1,5 kW 400 Volt Information No.A 11 11720 Year of construction2012 Floorspace2,5x1,6 M Total height0,7 M Weight750 KgLifting/tilting machinesBüter Hebetechnik GmbHConveying systems > Lifting/tilting machinesBrand > Büter Hebetechnik GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU331S605 LocationBarneveld MakeBrabender (D) Specified Features - Viscosity test machine Variable speedcheck Speed5-120 rpm With computerDell With extruder(1x) With double screw extruder(1x) TypeDSK 42/7 Screw dia.42mm L/D7 Number of heating zones:3 Information TypePLasti-Corder 814400 / PL 2000 No.911021 / 901455 Floorspace1,7x0,7 M Total height1,6 M Weight500 Kg Extra Specificationsworking condition tested Viscosity test machinesBrabenderPlastic machinery > Viscosity test machinesBrand > Brabender What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKUR0333 MakeBüter Hebetechnik GmbH (D) LocationBarneveld TypeH 11-06 Main Features MaterialMild steel Motor1.5 KW Height600 mm Specified Features - Lifting/tilting machine MaterialMild steel Lifting machinecheck Max. weight1100 Kg Lifting height0,6 M Hydraulic drivecheck With hydraulic unitcheck Motor1,5 kW 400 Volt Information No.A 11 11720 Year of construction2012 Floorspace2,5x1,6 M Total height0,7 M Weight750 KgLifting/tilting machinesBüter Hebetechnik GmbHConveying systems > Lifting/tilting machinesBrand > Büter Hebetechnik GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU207P139 LocationBarneveld MakePESTER VERPACKUNGSMACHINEN TypePEWO-PACK 450 SN No.4047 Main Features Width450 mm Specified Features - Transwrap machine Transwrap machinecheck Contact parts stainless steelcheck Suitable for film material:0,02mm - 1,0mm (PE) Sealing width30 - 300mm Electric capacity16,0 KW /33A Information Year of construction1997 With switchcheck Floorspace5.0X1.5 M Total height2.2 M Weight2320 KGTranswrap machinesPesterPackaging machines > Transwrap machinesBrand > Pester What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Alzmetall AB 3 ES - Column Drilling Machine -Drilling capacity / steel 35mm -Projection 280mm -Drilling stroke 180mm Hebkn Auevtzrvj S Tol -Recording MK 3 -Table size 600x470mm -Stepless speed regulation -Drilling depth stop -Drill chuck -Documentation Dimensions: LxWxH1.2x0.8x2.1 meters / Weight 550 kg
Hagen & Göbel HG22EB Tapping Machine -Type HG22EB -Brand Hagen & Göbel -Speed range 180-1120 rpm -Table dimensions approx. 600x500mm Dimensions: LxWxH 1.1x0.7x2.0 meters / Weight 1000Kg
Tool milling machines DECKEL FP1 -Travel X/X/Z 245-150-340mm -Without vertical head / machine was only used for horizontal milling work -Speed range 95-1900 rpm -Built-in rotary table - Automatic feeds X & Y axis -Various collets -Documentation Dimensions: LxWxH 1.1x0.9x1.6 meters / Weight 650Kg
KÖLSCH, universal milling machine UNI1-UNI4 Universal milling machine suitable for pitch circle and full circle work, setting hole patterns with integrated dividing table and coordinate milling system.
CNC - Universal milling machine HERMLE UWF 902-S -Heidenhain 426 -Built in 1997 -Travel X/Y/Z 600-450-500mm -Speed range 20-6300 rpm -Tool holder SK40 -Vertical - Horizontal milling device -Drill quill -Coolant device -Angle table -Machine enclosure -Documentation Dimensions: LxWxH 3,9x2x2Meter / Weight 4000Kg Hobkn Au Sjv Iklus Tol
SIPA Band Saw Model 800 TOP made of steel: - upper spoke flywheel, full lower flywheel - Motor 4 kW / 5.5 HP, 380 volts - with upper and lower blade guide - tilting table
TRAUB TNS 65 D / 5 - Axis CNC Lathe -For complete technical data, see data sheets -Control TX8 D -Built in 1994 -Rod passage 65 mm -Hydraulic bar loading magazine -Various driven tool holders -Tool holder -Three-jaw chuck -Complete documentation Hebkn Auovug Uls S Tel
Fasti - Round bending machine / type 2040x2mm -GS / Identifier -Roller diameter 105mm -Max. sheet thickness over the entire length 2mm -Footswitch -Safety device Dimensions: LxWxH 3x1x1.3 meters / Weight 1400Kg Hebjvdnahskn Au S Tsl
Key data: 62 kN
Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, turntable and additional automation Year of Make: 2011 Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control: BABYPLAST - Touch Screen Additional equipment: Production line with robot, turntable and additional automation Vertical Injection Molding Machine Air valves Injection for mold division Automatic adjustment of the injection unit setting (top - bottom) The turntable is driven by a servo motor controlled by an inverter – very precise Automatic part feeding with quality control system Machine workplace protection with safety package Dimensions: Weight: 350 kg Length/Width/Height: 0.70x1.00x1.65 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to part ...
Tool milling machine MAHO MH 800 -Travel X/Y/Z 700-350-450mm -Table surface 940x510mm -Spindle holder SK 40 -Spindle speeds 32-1600 rpm -Automatic longitudinal/transverse feeds -Automatic feed / vertical milling head -Coolant device -Various tool holders -More technical data / See photos Dimensions: LxWxH 1.9x1.7x1.9 meters / Weight: 3500Kg Errors / input errors excepted Hjbkn Ausvbrf Ae S Tsl
Collet / Gamesa - Radial drilling machine / mobile crane -Boom approx. 1200mm -Universal angle head can be adjusted in several ways -Spindle speed 95 - 750 rpm -Automatic feeds -Morse taper MK4 -Boom height adjustable approx. 1400mm -Control cabinet retrofit Dimensions: LxWxH 2x1x2.1 meters / Weight 1500Kg Hebkjvucbhon Au S Tsl
Key data: 1100 kN
Ferromatik Milacron K110D-S/2F / 2K Injection Molding Machine Year of Make: 1998 Injection unit: Screw diameter: 30 mm Injection weight: approx. 85 g Spray pressure: 2298 bar Dosing volume: 99 ccm Clamping unit: Clamping force: 110 t Spar spacing: 470x470 mm Size of the clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: hydraulic Control: Ferromatik Milacron Additional equipment: 2-Component Injection Molding Machine Euromap 67 Robot interface Hydraulic core pull x 4 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Screw diameter in vertical injection unit: ⌀25 mm - approx. 43 g/hp The machine was regularly serviced Recently, the service center replaced the cylinder of the machine with worm and the hydraulic valves with new ones Dimensions: Weight: 6300 kg Length/Width/Height: 5.00x1.60x3.60 m All offer ...
Rotary table surface grinding machine ARTER A 3-16 Hobkn Ausvub Sxs S Tel -Grinding diameter max. 450mm -Grinding height approx. 200mm -Workpiece weight approx. 250Kg -Total power requirement approx. 4KW -Coolant device -Machine enclosure -Work light Dimensions: LxWxH 2.5x1.5x1.7 meters / Weight approx. 3500Kg
Key data: 1500 kN
Ferromatics Milacron Magna T(MTs) 150-450 / Production line with the Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt and contactor housing / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 45 mm Injection weight: 215 g Spray pressure: 1984 bar Dosing volume: 226 ccm Clamping unit : Clamping force: 150 t Tiebar spacing: 510x510 mm Size of the clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: toggle lever Control: B&R - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (for additional payment) Injection unit is wear-resistant and resistant to corrosion Main motor of the machine – servo motor driven by inverter Central lubricatio ...
Tool milling machine DECKEL FP1 with 3 axis active digital display TNC 113 from educational institution -Travel X/Y/Z 300x160x340mm -Speed range 40-2000 rpm -Feed infinitely variable in three axes Hobkn Asv Abp Tju S Tjl -Rapid traverse in all three axes -Vertical milling head - 100mm movable -Vertical - Horizontal milling device -Drive power 1.5/1.9KW -Rigid angle table -3 axis digital display Heidenhain TNC113 -Coolant device -Work light -Documentation Dimensions: LxWxH 1.3x1.2x1.6 meters / Weight 850Kg
Hagen & Göbel HC22E Tapping Machine - Product type HC22E -Brand Hagen & Göbel -Speed range 56-355 rpm -Table dimensions approx. 600x500mm -Year of construction 1988 Dimensions: LxWxH 1.1x0.7x2.0 meters / Weight 1000Kg
Key data: 3500 kN
Ferromatics Milacron K-TEC 350-2650 / Production line with the Sepro robot Year of Make: 2017 Injection unit: Screw diameter: 70 mm Injection weight: 1104 g Spray pressure: 2175 bar Dosing volume: 1213 ccm Clamping unit: Clamping force: 350 t Handlebar spacing: 750x750 mm Size of the clamping plates: 1110x1165 mm Ejector: hydraulic Clamping unit: hydraulic Control: MOSAIC - Touch Screen Additional equipment: Very good technical condition High-speed machine Operating hours: approx. 10,000 h in automatic mode Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull x 3 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Parallel movements Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Energy-efficient machine – has a system with 3 hydrauli ...
Type DTL-20A modified Brush roll height 200 mm Pneumatic Grinding Head Height 200 mm Brush roll diameter 300 mm Pneumatic Grinding Head Diameter 100mm Diameter of spindle 25/30 mm Roller speed: frequency control Electric up and down Power 0.75 kW Transport dimensions 860x750x1100 mm Weight 140 kg Price 2050 Eur (EXW Jonava, Lithuania)
Tool milling machine Emco FB3 Movements in X-Y-Z = 300-200-350 mm spindle with quill ISO-30 ISO-30 horizontal spindle Angle head swivels by ±90° Feed and rapid traverse in X and Y Angle table 600 x 180 mm Digital display Heidenheim ND780 Year of Make: 2006 Cleaned and tested
Key data: 1000 kN
Boy 100E / Hybrid Machine Year of Make: 2014 Injection unit: Screw diameter: 32 mm Injection weight: 92.3 g Spray pressure: 2127 bar Dosing volume: 96.5 ccm Clamping unit: Clamping force: 100 t Tiebar spacing: 430x360 mm Size of the clamping plates: 750x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha 2 - Touch Screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Control with air valve Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Dimensions: Weight: 3530 kg Length/Width/Height: 4.37x1.21x2.20 m Drive: Pumps/motor: 15 kW Heating capacity: 7.7 kW Total power: 22.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical test ...
Key data: 340 mm, 160 mm
Surface Grinding Machine Lipemec PM300 XYZ = 340 x 160 x 240 mm Permanent magnet 250 x 130 mm Max. diameter of whetstone 200 mm Distance between table top and spindle axis 315 mm All feeds manually Digital display Heidenhein, 0.001 mm steps on 2 axes Table brake Dressing Diamond
Key data: 900 kN
Boy 90 M Year of Make: 2004 Injection unit: Screw diameter: 42 mm Injection weight: 193 g Spray pressure: 1724 bar Dosing volume: 214.7 ccm Clamping unit : Clamping force: 90 t Tiebar spacing: 430x360 mm Size of the clamping plates: 635x610 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan - Touch Screen Additional equipment: Euromap 12 Robot interface Air Valve x 1 Dimensions: Weight: 3100 kg Length/Width/Height: 4.37x1.21x2.20 m Drive: Pumps/motor: 15 kW Heating capacity: 11.3 kW Total power: 26.3 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Tool Milling Machine Cover FP3 SN 3641 Year ±1977 Travel X/Y/Z: 500/300/395 mm Spindle speed: 40–2000 rpm Spindle motor: 3 kW, 220/380 V, 50 Hz with brake Feed and rapid traverse in X-Y-Z Angle table Vertical milling head with quill ISO 40 S20x2 Horizontal quill Iso 40 S20x2 Weight approx. 1200 kg 3-axis digital display Heidenhein Cooling system Some tool holders S20x2 Collets Machines are tested and serviced Can be viewed under power 3 months warranty from stock
LWB Steinl VCRS-T 300/36 T / Machine like new Year of Make: 2006 Injection unit: Dosing volume: 36cc Clamping unit: Clamping force: 36 t Ejector: hydraulic Clamping unit: hydraulic Control: LWB ECO Additional equipment: Hydraulic core pull x 1 Control with air valve The injection unit was made of bimetal Dimensions: Weight: 3000 kg All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Key data: 800 kN
Boy 80 M Year of Make: 1997 Injection unit: Screw diameter: 36 mm Injection weight: 132 g Spray pressure: 2085 bar Dosing volume: 147.6 ccm Clamping unit : Clamping force: 80 t Tiebar spacing: 410x358 mm Size of the clamping plates: 680x555 mm Ejector: hydraulic Clamping unit: toggle lever Control: Procan CT Additional equipment: Dimensions: Weight: 3200 kg Length/Width/Height: 4.14x1.21x2.07 m Drive: Pumps/motor: 15 kW Heating capacity: 10.4 kW Total power: 25.4 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Key data: 550 kN
Boy 55A Pro / Operating hours: 18,153 in automatic mode / Machine in very good technical condition Year of Make: 2016 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit: Clamping force: 55 t Spar spacing: 360x335 mm Size of the clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: 18,153 in automatic mode Pneumatic core x 2 Hardened injection unit - Bimetal The machine has been regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW Al ...
Key data: 550 kN
Boy 55A Pro / Operating hours: 16,624 in automatic mode / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit : Clamping force: 55 t Spar spacing: 360x335 mm Size of the clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: 16,624 in automatic mode Pneumatic core x 2 Hardened injection unit - Bimetal The machine has been regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW A ...
Key data: 550 kN
Boy 55A Pro / Operating hours: 17,083 in automatic mode / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit: Clamping force: 55 t Spar spacing: 360x335 mm Size of the clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: 17,083 in automatic mode Pneumatic core x 2 Hardened injection unit - Bimetal The machine has been regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW Al ...
Key data: 100 kN
Boy XS / Excellent technical condition Year of Make: 2020 Injection unit: Screw diameter: 12 mm Injection weight: 4.1 g Spray pressure: 3128 bar Dosing volume: 4.5 ccm Clamping unit: Clamping force: 10 t Handlebar spacing: 160 mm Size of the clamping plates: 321x246 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha 4 - Touch Screen Additional equipment: Machine like new Euromap 67 Robot interface Air Valve x 6 Wittmann automatic conveyor with dryer of the Farratech brand Dimensions: Weight: 450 kg Length/Width/Height: 1.48x0.52x1.38 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Key data: 3000 kN
Battenfeld EcoPower SE 300/1330 / Electric Machine Year of Make: 2012 Injection unit: Screw diameter: 50 mm Injection weight: 491.4 g Spray pressure: 2470 bar Dosing volume: 540 cc Clamping unit: Clamping force: 300 t Tiebar spacing: 770x720 mm Size of the clamping plates: 1090x1170 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B6 - Touch Screen Additional equipment: Electric machine: high-speed, energy-saving and very quiet Machine in very good technical condition Euromap 67 Robot interface Air Valve x 8 Control with hot runners x6 Hardened injection unit - Bimetal Parallel movements It is possible to change the screw diameter for fi 45, 55, 65 mm Dimensions: Weight: 14100 kg Length/Width/Height: 7.20x2.04x2.20m Drive: Pumps/motor: 0 kW Heating capacity: 22 kW Total power: 0 kW All offered machines are started by our servic ...
Key data: 2700 kN
Battenfeld HM 270/1330H/1000H / 2K machine in very good technical condition / Operating hours: approx. 10,000 h in automatic mode Year of Make: 2006 Injection unit: Screw diameter: 55 mm Injection weight: 594 g Spray pressure: 2041 bar Dosing volume: 653 ccm Clamping unit: Clamping force: 270 t Handlebar spacing: 710x710 mm Size of the clamping plates: 1030x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B4 Additional equipment: Machine in very good technical condition 2K machine with parallel horizontal injection units Central injection Operating hours: approx. 10,000 in automatic mode Total number of operating hours: 11,876 h Control with air valve Hydraulic core pull x 3 Reinforced Injection Units – Bimetal Proportional valves on injection units - precise spraying Parallel movements Injection unit 1000H Screw diameter: 50 mm I ...
Key data: 3000 kN
Battenfeld HM 300/2250S with the Wittmann W818 robot / Machine in very good technical condition / Operating hours: approx. 40,000 h in automatic mode Year of Make: 2007 Injection unit: Screw diameter: 55 mm Injection weight: 702.5 g Spray pressure: 2500 bar Dosing volume: 772 ccm Clamping unit : Clamping force: 300 t Spar spacing: 710x630 mm Size of the clamping plates: 1030x1020 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touch control panel Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Control with hot runners x 8 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection New original screw and barrel are installed in the machine Robot Wittmann W818 4-axis, high-speed robot: ...
Key data: 1500 kN
Wittmann Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Molding Machine with the Rotary Molding Machine Year of Make: 2015 Injection unit: Screw diameter: 35 mm Injection weight: 175.6 g Spray pressure: 2743 bar Dosing volume: 193 cc Clamping unit: Clamping force: 150 t Spar spacing: 0x0 mm Size of the clamping plates: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 Additional equipment: Vertical Injection Molding Machine with the Rotary Molding Machine Hybrid machine: high-speed, energy-saving and very quiet Air Valve x 5 Hydraulic core pull x 1 Control with hot runners x 12 Injection unit is wear-resistant and resistant to corrosion Rotary table diameter: 1500 mm Rotary table driven by a servo motor, controlled by an inverter Dimensions: Weight: 11300 kg Length/Width/Height: 3.83x1.50x4.07 m All offered machines ...
Key data: 1300 kN
Battenfeld BA 1300V/315 V-R / Vertical Injection Molding Machine with the Rotary Table Year of Make: 1997 Injection unit: Screw diameter: 40 mm Injection weight: 182.9 g Spray pressure: 1575 bar Dosing volume: 201 cc Clamping unit: Clamping force: 130 t Handlebar spacing: 454x740 mm Size of the clamping plates: 815x1010 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG 4000 Additional equipment: Air Valve x 5 Hydraulic core pull x 1 Rotary table: 1250 mm The vertical injection unit - screw diameter fi 35 mm Dimensions: Weight: 7500 kg Length/Width/Height: 3.83x2.33x4.16 m Drive: Pumps/motor: 18.5 kW Heating capacity: 8.98 kW Total power: 27.48 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live te ...
Key data: 1500 kN
Wittmann Battenfeld HM 150/750 Servo Power / Hybrid Machine / Operating Hours: approx. 29,000 in automatic mode Year of Make: 2014 Injection unit: Screw diameter: 50 mm Injection weight: 402.2 g Spray pressure: 1714 bar Dosing volume: 442 cc Clamping unit: Clamping force: 150 t Tiebar spacing: 520x470 mm Size of the clamping plates: 760x755 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6P - Touch Screen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 29,000 in automatic mode Total number of operating hours: 36,714 Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - Servo motor driven by inverter - Energy saving Dimensions: Weight: 6600 kg Length/Wid ...
Key data: 1100 kN
Wittmann Battenfeld EcoPower 110/350 / Electric motor / Operating hours: approx. 15,000 in automatic mode Year of Make: 2019 Injection unit: Screw diameter: 35 mm Injection weight: 153.8 g Spray pressure: 2083 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 110 t Handlebar spacing: 470x420 mm Size of the clamping plates: 682x682 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B8 - Touch Screen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 15,000 in automatic mode Total number of operating hours: 21,800 Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Central lubrication Dimensions: Weight: 4800 kg Length/Width/Height: 4.91x1.42x2.10 m ...
Key data: 1000 kN
Battenfeld TM 100/525 Year of Make: 2007 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Spray pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 100 t Spar spacing: 420x420 mm Size of the clamping plates: 640x640 mm Ejector: hydraulic Clamping unit: toggle lever Control: UNILOG B2 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Control with hot runners x 12 Injection unit is wear-resistant and resistant to corrosion Central lubrication Automatic tool height adjustment Dimensions: Weight: 3900 kg Length/Width/Height: 4.46x1.33x1.78 m Drive: Pumps/motor: 18.5 kW Heating capacity: 12.1 kW Total power: 30.6 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participa ...
Key data: 1100 kN
Wittmann Battenfeld EcoPower 110/350 with the Wittmann W818 robot / Electric machine / Operating hours: approx. 16,000 in automatic mode Year of Make: 2017 Injection unit: Screw diameter: 35 mm Injection weight: 153.8 g Spray pressure: 2083 bar Dosing volume: 169 ccm Clamping unit: Clamping force: 110 t Handlebar spacing: 470x420 mm Size of the clamping plates: 680x660 mm Ejector: electric Clamping unit: toggle lever Control:UNILOG B8 - Touch Screen Additional equipment: Perfect technical condition Electric machine: high-speed, energy-saving and very quiet Operating hours: approx. 16,000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Central lubrication Automatic tool height adjustment Parallel movements The machine was servi ...
maximum number of results exceeded
please refine your search
