tetra pak machines used for sale

Danoflex Ø 800 mm cylindrical abrasive grinding Max sandingwidth: 800 mm Main motor(s) power : 4.5 kW

Key data: 20000 kN

Angebot/Offer: Engel Duo 17060/2000 Viper Robot 60 approx. 4900h YOC 2021

Presse à injecter BILLION 200T Bi-matière HERCULE H260-470/200 Commande Dixit 500 Année : 1998 Nombre d’heures: 23 000 heures Caractéristiques des 2 groupes d’injection : Groupe H260 : diamètre 32 mm - volume injectable de 116 cm3 Pression d’injection : 2205 bars Groupe H470 : diamètre 38 mm - volume injectable de 198 cm3 Pressions d’injection : 2327 bars Diamètre bague du plateau : 100 mm Distance entre colonnes : 610 x 610 mm Dimensions des plateau : 870 x 870 mm Course d'ouverture : 560 mm Epaisseur du moule min/max : 280-580mm Capacité du réservoir d’huile : 500 litres Interface robot Robot STAR 1000EMIII 3 Course en X : 2100 mm / Course en Y : 750 mm / Course en Z : 1000 mm

The Model 208B BEVELMASTER™ Air is a portable ID mounting weld end preparation machine tool for beveling, facing and counterboring 2" through 8" pipe. The tool is configured with an in-line feed knob and pneumatic drive motor at a right angle to the lathe head. The Model

Weinig Profimat 26 Super four-sided planer Working width 230mm Working height 130mm Number of spindles 5 Spindle system 7.5kw Down Left 11kw rights Mount 75kw Down 5.5kw Pneumatic clamps divided into 2 sections Feed speed adjustable by variator 5-24m/min CE Certificate Technical documentation Net price 68,000zł

Aufschnittmaschine / Slicer GRAEF MASTER 3020 Specifications: 230 Volt / 50 Hz / 2.2 A / 500 W Cutting thickness adjustment: 0 to 24 mm Knife diameter: 300 mm Stainless steel knife incl. grinder Luminous flux Machine with CERA 3 coating Weight: 37 kg External dimensions (L/W/H): 500 x 600 x 420 mm Cutting size: L 260 x H 195 mm Cutting thickness 0 – 24 mm Carriage dimensions: L 260 x W 300 mm Installation area: L 540 x W 440 mm External dimensions: L 600 x W 570 x H 420 mm Working area: L 680 x W 720 x H 570 mm Knife speed: 230 rpm with weighing function up to 0 - 5,000 g (not legal-for-trade) Year of manufacture: 2018 Function checked, machine ready for immediate use! RRP: EUR 5,057.50 Condition, see original pictures! If you have any questions, email or call.

For sale is a Coljan labeler Model No.: ETM Year of Make: 2014 Printer Manufacturer: Zebra Type: ZE500-4 Control: Siemens Condition: good For sale is a Coljan labeler Model: ETM. Year of manufacture: 2014 Printer manufacturer: Zebra Type: ZE500-4 Control: Siemens. Condition: good

SPECIFICATIONS: Installed power: 0.45 kW Voltage: 230 V Spindle speed: max. 2220 rpm CE

Fully automatic slicer Bizerba Type: A404 Specifications: 230/400 volts, 50 Hz, 2.5/1.4 A Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife including original Bizerba sander medium-sized carriage for a maximum of 40 cm of food to be cut Stainless steel base frame Power current Output: between 30-55 strokes/min 99 different programs can be saved Year of Make: 2009 Function checked, machine ready for immediate use! Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call.

Inclined Slicer Slicer / Slicer BIZERBA GSP H Specifications: 230 Volt / 50 Hz / 1.79 A / 0.360 kW Cutting thickness adjustment: 0 to 24 mm Knife diameter: 330 mm Stainless steel knife including original knife sharpener Luminous flux Year of Make: 2017 Function checked, machine ready for immediate use! Condition, see original pictures! If you have any questions, email or call.

Fully automatic slicer Bizerba Type: A404 Specifications: 230/400 volts, 50 Hz, 2.5/1.4 A Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife medium-sized carriage for a maximum of 40 cm of food to be cut Stainless steel base frame Power current Output: between 30-55 strokes/min 99 different programs can be saved Year of Make: 2009 Function checked by a specialist, machine immediately ready for use! Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call.

3D coordinate measuring machine XM 1600 control unit Measuring range on the table 200 x 200 x 200 mm Maximum measuring range 2000 x 1200 x 1000 mm Accuracy: +/- 7μm Repeatability: +/- 3μm

URBAN AMS 6010 very good condition fully operational

Siemens Megalix CAT 125/15/40/80-121 GW Focal spot 0.3/0.6/1.0 Tube Housing Model No. 5764522 Tube Model No. 3800351 • Before taking over, all devices or systems have been tested on site for their functionality. • The tube is located in our warehouse in Freiberg / Germany. • You buy the tube in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system component must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Souffleuse MECCANOPLASTICA MP1 - D En bon état de fonctionnement Année 2000 2 postes Force de fermeture : 35 KN Volume max du contenant. : 1,5 litres Diamètre vis. : 60 mm

Manufacturer: FRECH Model: DAW 125 S RC Year of Manufacture:1998 Type of Machine : zinc die-casting system Condition : The machine is fully functional and was used to manufacture bathroom accessories (shower handles). After just over a year of downtime, an oil change is required. Locking Force: 1250 kN Working Pressure: 105 bar Machine Weight: 6000 kg Rated Current: 40 A Rated Voltage: 3×400 V Control Voltage: 24 V Frequency: 50 Hz Find more here - / Contact us at -

video control station The VCPevo / VCP Evolution (often written VCPevolution”) is a fully automatic register punching & bending system for printing plates (offset printing) built by NELA. VCP” stands for: Video‐recognition of register marks (V) + Controlling via CCD image processing (C) + Positioning by stepping motor control (P) — as one brochure puts it. The machine is used in the pre‐press / printing-plate automation sector: it aligns exposed printing plates, punches the register holes, bends the plates (to the correct angle) in one cycle. The VCPevolution line is described as the new generation” of the VCP series, aimed at high precision, high throughput, integration into automation / plate sorting lines. According to NELA’s product page for VCP, the machine is available in different models and can easily be integrated into any automation solution.” nela.de Fin ...

TECHNICAL SPECIFICATIONS Manufacturer: FRÄMBS&FREUDENBERG Name: Dewatering screening machine Type: "Roberg" 1000/2500/1 Year of manufacture: unknown Screen length: 1,000 mm Screen width: 2,500 mm

GENERAL Project No.: 905789 Quantity: 1 pcs. Manufacturer: BUDERUS Type: BDG 220 Control: Siemens 840 D solutionline Year of Make: 2020 Condition: Used machine Spindle Approx (hrs): 3000 Shifts machine one approx. (hour): rarely used DESCRIPTION GRINDING Max. workpiece diameter 440 mm Max. workpiece height 150 mm Travel in X 170 mm Max. rapid traverse speed in X/Z 30 m/min Max. feed speed in X 0.01-15 mm/min Max. speed workpiece spindle 1000 1/min OTHER EQUIPMENT Workpiece probes for measuring thickness deviation Gate sensor Splash protection cladding with fully encapsulated working area Automatic work room door Lighting in the work area Mechanical oil/emulsion mist extraction system Coolant device with paper belt filter High pressure pump 25 bar Mobile control unit for set-up operation with electronic handwheel Machine condition light Au ...

Komptech Multistar ONE Category: Star Screen Specification: Serial Number: 7322 Year of Make: 2021 Power: 80kW Max. flow rate: 250 m3/h Weight: 24 000 kg Emission class: Tier 4 Final / Stage V Equipment and description: Machine was reconditioned and equipped with new screen decks.

Offer 25380 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Threading in steel ST 60 to M 42 - Drilling spindle holder MK 4 - Drilling spindle stroke 200 mm - Drilling spindle speeds infinitely adjustable 40 – 1100 rpm - Right - Counterclockwise rotation - 3 feeds 0.1; 0,16; 0.25 mm/rev - Projection 350 mm - Max distance drilling spindle – table / base plate 790 / 1210 mm - Table with 2 T-slots 630 x 540 mm Height adjustable via rack with hand crank - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 600 x H 2050 x D 980 mm - Weight approx. 650 kg - with: - Tapping device - Keyless chuck 1-13 mm - Emergency stop button -Lighting - Coolant device

B&A REF:  9213 TON: 60 SCREW DIAMETER:  25MM SHOT WEIGHT: 45 STROKE VOLUME:  49CM3 INJECTION PRESSURE:  2240AR PLATEN SIZES:  446 x 446MM DBTB: 320 X 320MM MIN MOULD HEIGHT:  200MM MOULD OPENING STROKE:  350MM MAX DAYLIGHT:  550MM EJECTOR STROKE:  125MM CONTROLS: SELOGICA CORE PULLING: 1 MOTOR: 15 HEATING CAPACITY: 8.9KW SCREW DRIVE:   HYDRAULIC

B&A REF:  9222 TON: 85 SCREW DIAMETER:  35MM SHOT WEIGHT: 155 STROKE VOLUME:  170CM3 INJECTION PRESSURE:  1700AR PLATEN SIZES:  590 X 570MM DBTB: 400 X 360MM MIN MOULD HEIGHT:  150MM MAX MOULD HEIGHT: 450MM MOULD OPENING STROKE:  360MM MAX DAYLIGHT:  810MM EJECTOR STROKE:  125MM CONTROLS: DIMI EL 2000 CORE PULLING: 1 AIR VALVES: 2  MOTOR: 11 HEATING CAPACITY: 7.5KW ROBOT INTERFACE: EUROMAP 12 SCREW DRIVE:   HYDRAULIC

Laser cutting machine Trumpf Trulaser 3030

ONE Bending Testing Machine Load range up to 200kN Class 2 in the load range 40kN Class 1 in the load range 100kN Class 1 in the load range 200kN Indoor crane available for dismantling

Manufacturer: Heidelberg Model: HM450 Year of Manufacture: 2007 Weight: 1630 kg Equipped with 4 stations. Includes a three-knife trimmer with cutting die and Heidelberg sewing heads. Find more here - / Contact us at -

B&A REF:  9237 TON: 320 SCREW DIAMETER:  70MM SHOT WEIGHT: 1078 STROKE VOLUME:  1185CM3 INJECTION PRESSURE:  1500AR PLATEN SIZES:  980 X 980MM DBTB: 650 X 650MM MIN MOULD HEIGHT:  200MM MAX MOULD HEIGHT: 730MM MOULD OPENING STROKE:  710MM MAX DAYLIGHT:  1440MM EJECTOR STROKE:  240MM CONTROLS: SEF 200 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 37 HEATING CAPACITY: 22KW ROBOT INTERFACE: EUROMAP 12 SCREW DRIVE:  HYDRAULIC

Key data: 500 mm, 360 mm, 400 mm

Built in 1993 Heidenhain 415 Tool changer for 32 tools Travel distances 500 x 360 x 400 mm Feed in all axes manual/programmable 5000/8000 mm/min Rapid traverse 8 m Spindle speeds 20 - 4500 rpm Spindle motor 6 kW Tool holder ISO 40 Weight 2800 kg Connected load 12.5 kW

Offer 25319 Specifications: - Drilling capacity in steel ST 60 35 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 160 mm - Drilling spindle speeds 65 - 3250 rpm - 3 feeds 0.1 / 0.2 / 0.3 mm/rev - Projection 320 mm - Max. distance table - drilling spindle 560 mm - Table with 2 T-slots 500 x 420 mm - Height adjustable via rack with hand crank - Table left + right tiltable - Drive 400 V / 1.5 kW - Space requirement approx. W 550 x H 2200 x D 900 mm - Weight approx. 550 kg - with: - Right – Counterclockwise - Coolant device -Lighting

Key data: 510 mm, 1100 mm

Year of construction 2010 Turning length 1000 mm Turning diameter bed Ø 510 mm Turning diameter carriage 300 mm Spindle bore 80 mm Power spindle 16 kW Bed width 330 mm Quill 75 Ø Jaw stroke 160 mm Spindle mount 5 Mk Speed 2500 rpm Feed X - axis 8000 mm/min. Feed Z-axis 8000 mm/min. Length 3200 mm Height 1800 mm Width 1800 mm

Graule ZS 135 Pull Saw - Technically outdated - 400V version - With brake motor - With saw blade protection - new support plate, original Graule - without base frame

Specifications: Manufacturer: Lid Type: FP1 active Control: Heidenhain Active TNC113 Year of Make: 1977 Colour: grey Travels: X 300, Y 160, Z 340 mm Spindle Speed: 40 – 2,000 rpm. Tool/movement Tool holder: SK40 (S20x2) Feed: infinitely adjustable Active feed: in X and Z axis Dimensions and weight Weight: approx. 800 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: The machine is in very neat original condition. Original lidded cabinet with various mounts and dividing head

Inv. Num. : 8766 Type: SPITFIRE 1500 Producer: Pierce Created: 2012 Parameters: Software: Lantek Expert Duct Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 15 mm Plasma Source: HYPERTHERM 85A Machine height: 1400 mm Machine length: 3650 mm Machine width: 2520 mm Equipment: Exhaust fan

MODUL ZFWZ 1250x14I gear hober (can do 1580 mm) Max. Diameter: 1250 mm Cutting width: 600 mm Module 2-16 Maximum size of the hob: 240 x 280 mm Table diameter: 1020 mm Speeds: 28 – 200 rpm Axial feed rates: 0.28 – 8 mm/min Radial feed rates: 0.1 – 2 mm/min Tangential feeds: 0.16 – 4 mm/min Stand tilt – left/right: +/- 45 Main motor power: 5 / 19.5 kW Power of the rapids motor: 12,5 kW Max. diameter of the part without tailstock: 1,250 mm Max. diameter of the part with tailstock: 800 mm Weight of the machine : 16 t Machine dimensions approx. 4.5 x 2.1 x h 3.3 m EQUIPMENT: Extended driven shaft for gear cutting up to Ø 1580 mm Capability to work with hob cutters Ø 235 mm and length 380 mm. Inverter control of the main electric motor. Expanded set of change gears

ORT RP30 MS 2-roll 30 tons, thread rolling, knurling, small gears, 2009 = YOM, Electronic overhaul and electronic retrofit with Siemens PLC (2025) The machine is visible working in our warehouse in Gussago BS. Possibility of proof M i m u Machine Tools, Power (Ton): 30, Number of rollers: 2, PLC: Yes

CHURCHILL PH3615 gear hobbing machine Max workpiece diameter 914 mm Max diametral/ pitch- 8 Module, 3 D.P. Horizontal centre distance:-63,5- 559 mm Max horizontal travel 469 mm Height hob centre to worktable: 127- 508 mm Max travel of vertical feed 381 mm Max height worktable to tailstock centre768 mm Table diameter 762 mm Table hole (diameter x depth) 89 x 381 mm Hob dia x length 178 x 203 mm Max travel of hob slide 127 mm Diameter of hob arbor 32 mm Hob spindle speeds, infinitely variable 50 – 200 rpm Vertical feeds 0.38 – 5 mm Main drive motor 10 HP Floor area 3960 x 2130 x 2300 mm Weight 11,500 kg Extended set of change gears Complete documentation Operational variable speed drives for main motor and feed drives

Type: Ultrix 800 RT The Ultrix 800 RT is a multifunction machining center with 5 interpolated axes and a moving gantry for high-speed milling, turning, grinding, drilling, tapping, finishing, deburring, and roughing of complex parts. When used for turning gt; vertical lathe: - swivel range: 1100 mm - maximum weight of the workpiece: 700 kg - 40/30 kW on the table - max. torque on the table: 1500 Nm - maximum speed of the table: 1000 rpm - hydraulic clamping on table - tool taper for turning: KM63 - 150-position tool changer with 24 tool positions for turning When used for milling, grinding, drilling, ... gt; machining center: - X-axis: 800 mm - Y-axis: 900 mm - Z-axis: 600 mm - A-axis: -30° / 110° - C-axis: continuous - maximum weight of the workpiece: 700 kg - 55/40 kW on spindle - max. torque on the spindle: 22 Nm - max 40,000 rpm - tool taper for milling: HSK-E40 - 150-position to ...

Key data: 380 mm, 1000 mm, 4000 1/min

Stock number: 3961 CNC LATHE Manufacturer: MAZAK, Type: QTN 250-1000L Year of Make: 2004 Specifications: Max. circumferential diameter 380 mm dia. Max. turn. About Bed 610 mm Dia. Turning length 1032 mm Main motor power 26 kw Main spindle speed range 4000 rpm Hole through drawing pipe 80 mm dia. X axis movement 230 mm Z ash movement 1000 mm Tool turret with 12 stations Total power consumption 50 kva Control 640 T Nexus Fabr. Spindle Hours 6091 Hours Controlled in X-Z axes Accessories: Hydraulic Main Center Chuck Kitagawa B-212 15X (300mm) mm dia. Various tools pcs. Tool setter Chip conveyance. Length: 3550 mm, Height: 1870 mm, Width: 2000 mm, Weight: 5200 kg

Control Other AMNC-3i Travel X/Y/Z [mm] 3000/1500 Specifications Punching Machine EMK-3612MII (58) Punching force 300 kN Positioning accuracy ± 0.1 mm Number of tool stations 58 Machine Frame Bridge Frame Machine Table Type: Brush Table Punching Drive Servo-Electric Dual Drive Travel area (X x Y) 1525 x 3050 mm Control AMNC-3i (21.5" screen size) Equipment Punch & Forming Function Good parts flap Scrap conveyor belt system Dimensions Length 5436 mm Width 6212 mm Height 2342 mm Weight 21500 kg

Inv. Num. : 8767 Type: Trumatic L3030 Producer: Trumpf Created: 2007, GO 2023 Parameters: Hours: 6099 h Switch-on hours: 12949 h Laser power: 3200 W Work table length: 3000 mm Work table width: 1500 mm

Deckel FP5A CNC milling machine with Dialog 11 control. The machine is mechanically in good condition Stands in a hall almost rust-free. Accessories: Angle table

Soyer KTS 850 Working Area: X 800mm x Y 750mm Positioning accuracy according to the manufacturer: +/- 0.2 mm Welding range from M3-M10 to 40mm length 2 welding heads: Head 1 works perfectly, head 2 no longer welds reliably but works. Intuitive component programming via dxf data Machine completely enclosed with safety-monitored door Weight approx. 900kg 2x welding machines BMS-10N tip ignition according to DVS leaflet 0903 with gap and contact welding Weight approx. 20Kg 2x Universal vibrator UVR-300 Automatic bolt feeding from M3 to M8 and bushings up to M5 Weight approx. 48kg/vibrator plus accessories Other accessories: Various bolt holders for external threads from M3 to M8 Various push-in pistons with spacer rings for different bolt lengths Pneumatic Mass Tensioners Various feed hoses from M3 to M8 male thread

Stanko 2K52 Admission in drilling-spindle (morse): Mk3 Base dimensions (1) Table dim (2) : 1.120 × 550 mm Longitudinal travel drilling-head (X-axis): 500 mm DEPTH OF THROAT: 800 mm Speeds: 63 tot ~ 1.600 rpm Height: 1900 mm Weight: 900 mm ACCESSORIES: 2000 mm Cooling system: 1620 kg Clamping system: yes

Key data: 600 mm, 500 mm, 450 mm

Universal milling machine Hermle UWF 900 E Manufacturer: Hermle Model: UWF 900 E Year of Make: 1990 Factory No.: 1893 Specifications Travel: X-axis (longitudinal movement): 600 mm Y-axis (transverse movement): 500 mm Z-axis (vertical movement): 450 mm Quill: 100 mm, extendable Spindle head swivel range: ±90° Milling spindle front bearing: Ø 55 mm Tool holder: SK40 DIN 2080 or SK40 DIN 69871 or BT40 Table size (universal clamping table): 420 x 650 mm, expandable to 935 mm NC rotary table (4th axis): Ø 380 mm, swivelling ⚙️ Equipment / Accessories: Vertical milling head with quill and fine adjustment Universal face and angle milling head Heidenhain Control Particularly suitable for Individual and small series production Tool and mould making Precision and complex milling work Condition Well-maintained, fully funct ...

DECKEL FP 2 Tool Milling Machine Machine Details: Manufacturer: Lid Type: FP 2 Year of construction: approx. 1978 Condition: very good, technically tested and partially overhauled Availability: available on order The Deckel FP 2 is considered the reference among universal milling machines – robust, precise and reliable. Specifications: Travel: X-axis: approx. 400 mm Y-axis: approx. 200 mm Z-axis: approx. 400 mm Spindle: Speed range: approx. 40–2000 rpm Tool holder: ISO 40 Drive power: approx. 2.2 kW Tool clamping: manual Feeds: 8–400 mm/min Rapid traverses: approx. 1.5 m/min Digital display: 3-axis SINO Dimensions (LxWxH): approx. 2000 x 1500 x 1800 mm Weight: approx. 800 kg Equipment & Accessories: Vertical & horizontal milling equipment Drill quill 3-axis digital display SINO Coolant Setup Work light C ...

Key data: 1000 mm, 500 mm, 530 mm

Like new: X-axis: 1,000 mm Y-axis: 500 mm Z-axis: 530 mm Table dimensions: 406 x 1,372 mm Spindle mount: BT 40 Spindle speeds: 1 - 8,000 rpm Control: Fagor Equipped with: - Coolant system -Operating instructions Country of origin: Taiwan Engine power: 10 hp Machine LxWxH: 2,900 x 2,280 x 2,550 mm Machine weight: 3,100 kg

Pressta Eisele Panto 300 copy milling machine - Very good condition - With frequency converter and HF motors - With stop system

Bending capacity: 3/8"-2" Bending angle: 180° Angle turret: 6-fold Mounted bending tool: Ø 28 mm Country of origin: Netherlands Motor power: 3 kW Machine weight: 250 kg Machine LxWxH: 1,000 x 800 x 950 mm

HANDTMANN VF 620 Filling, Portioning. Year 2002

Key data: 3000 mm, 2000 mm, 1150 mm

X-axis: 3,000 mm Y-axis: 2,000 mm Z-axis: 1,150 mm Table dimensions: 2,800 x 1,500 mm Spindle mount: ISO 50 Spindle speed: 30 - 6,000 rpm Tool changer: 50 places CNC Control: OSP7000M Stand spacing: 2,050 mm Equipped with: - Angle milling head - Touch probe button - Double chip conveyors (recently renewed) - Cooling plant (recently renewed) -Operating instructions Country of origin: Japan Machine LxWxH: 9,000 x 3,500 x 3,500 mm +/- Machine weight: 27,500 kg