134,051 used machines on RESALE, but how to find them? Machine Search
Key data: 520 mm, 250 mm, 5 kW
SPECIFICATIONS: Working width: 520 mm Working height: max. 250 mm 4 knives Electronic height adjustment 4-speed feed Installed power: 5 kW
Hydraulic ruler holder, Automatic grinding wheel balancer, Cover, Hydraulic working grinding wheel cover, Equipment AEROEL measurement, Hydraulic table locking, Hoist for 1,000 kg, Refrigeration in electrical cabinet, Panel tire, Coolant transfer tank, Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Grinding wheel dimensions (od x id x width): Ø 650 x Ø 304.8 x 500mm, Ø min / max to grinding: 3/200 mm, Ø min/max to be rectified: 3/200mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, No. of regulating wheel speeds: Infinitas, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Min/max speed of regulating wheel (r.p.m.): 10 / 255 rpm, Dressing (auto / manual): Automatic - CNC, Diamond cutting (auto/manual): Automatic - CNC, Diamond dressing speed: 255 r.p.m., Diamond cutting speed: 255 rpm, Lubrication (auto / manual): Automatic ...
M.Bäuerle CAS 52 overpass; cleaned and tested; suitable for folding machine CAS 52; Working width 520mm. M.Bäuerle CAS 52 bridge; cleaned and checked; used for folding machine CAS 52; working width 520mm.
Loading and unloading of automatic parts / Automatic loading and unloading of parts, High: 1,750 mm., Long: 2,200 mm., Width: 2,000 mm., Weight: 12,000 Kg., Rack face width: 92 mm, Rack length max: 610 mm, Main motor power: 15 Cv, Workpiece ø max.: 41 mm, Max / min. pitch form: 20 / 40-32 / 64, Range module max / min.: 1.5 / 0.39, Maximum stroke of tools trolley: 760 mm, Specification: Roto-Flo
Loading and unloading of automatic parts / Automatic loading and unloading of parts, High: 1,750 mm., Long: 2,200 mm., Width: 2,000 mm., Weight: 12,000 Kg., Rack face width: 92 mm, Rack length max: 610 mm, Main motor power: 15 Cv, Workpiece ø max.: 41 mm, Max / min. pitch form: 20 / 40-32 / 64, Range module max / min.: 1.5 / 0.39, Maximum stroke of tools trolley: 760 mm, Specification: Roto-Flo
MITSUI SEIKI HR6A CNC machining center was built in 1984 in Japan by MITSUI SEIKI KOGYO CO., LTD. The machine is designed for precision milling, threading and boring of oversized workpieces with a maximum weight of 2 tonnes. All these machining processes are performed fully automatically, thanks to the use of an automatic pallet exchange system. This system allows workpieces to be loaded and unloaded simultaneously during machining, thus increasing production efficiency and significantly reducing machine downtime. The pallets are transported by a stable cast iron saddle on bed’s hardened and ground guideways. Movement of the X,Y,Z axes is performed on hardened and ground slideways. These ensure that the geometry of the axes remains constant, even when moving to end of their travels. All moving components, in turn, have Turcite B coated bearings, which ensure low friction and high vi ...
Inv. Num. : 8487 Type: ENSIS 3015 AJ Producer: AMADA Created: 2019 Parameters: Maximum power: 6 kW Switch-on hours: 19,588 h Operating hours: 10,631 h Work table length: 3000 mm Work table width: 1500 mm Feed length X-axis: 3000 mm Y-axis feed length: 1500 mm Feed length Z-axis: 100 mm Machine weight: 9500 kg
BFTech JZ-25 Max drill capacity: 25 mm Belt - vario (from -- to): 240 > 2710 rpm Height: 1100 mm
GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic HandwheelSoftware option - DXF ImportSoftware Option - DXF Import Possibility to open DXF files directly on the controller in order to extract contour and import it to the program.
ingesneden bovenste buigmes Max worklength: 1050 mm Max tickness: 2 mm Distance between clampblock -- ram: 48 mm Length: 1348 mm Depth: 850 mm Hight : 1175 mm
Capaciteit slang: max. 2 inch / 50 mm De slang wordt via een rupsbandsysteem in de machine gevoerd en aangestuurd door een elektromotor De invoersnelheid is instelbaar van 0 tot 40 m/min De afstand tussen de banden op het rupsbandensysteem wordt handmatig ingesteld met een handwiel dat is uitgerust met een digitale teller Capaciteit: 500 programma#39;s Eén programma omvat: de onderdeellengte, het aantal onderdelen, de verlengingsregelaar, de loopsnelheid van de slang, de naam van de slang, het programmanummer en de diameter van de slang De slang wordt gesneden met een speciale gekartelde schijf: 520x4x40mm 9 kW spindelmotor met rem Rotatiesnelheid: 3000 tpm Tijdens het snijden houden twee scharnierende kaken, handmatig verstelbaar door een wiel, de slang vast en geleiden deze Het buigen van de slang en het voortbewegen van de snijkop worden uitgevoerd door twee pneumatische cilinders Lu ...
Holke F-10-V X: 815 - Y: 400 - Z: 420 mm Max longitudinal travel X-axe: 815 mm Max cross-travel Y-axe: 400 mm Max travel Z-axe: 420 mm Power on spindle: 2 HP Admission in millinghead: ISO 40 Max quill travel Z´: 130 mm Spindlespeeds: 57 > 2275 rpm Table size: 1120 x 255 mm Weight: 1300 kg
Ibarmia EAP 60 Mk5 Admission in drilling-spindle (morse): Mk5 Max drill capacity: dia 70 mm SPEEDS: 50 > 1004 rpm
kop kan draaien: 90° (R amp; L) / 45° (F amp; B) 360° bovenarm draaibaar spindelhartlijn tot kolomoppervlak: 71 gt; 476 mm Max longitudinal travel X-axe: 750 mm Max cross-travel Y-axe: 305 mm Max travel Z-axe: 406 mm Max height workpiece: 70 > 476 mm Power on spindle: 2 HP Admission in boring head (ISO): ISO 30 Spindlespeeds: 3750 rpm Length: 1435 mm Depth : 1600 mm Height: 2100 mm Weight: 1 ton
Control Siemens 840D Turning diameter 254 mm Turning length 500 mm Chuck diameter 210 mm Turning length 410 mm Speed 4,500 min-1 8-speed revolver Conveyor
Full automatic bandsaw with bundle clamp and autofeed CNC controlled angle positioning workpiece width in bundle clamping: 0-300 mm workpiece height in bundle clamping: 5-300 mm single material feed length: 0-600 mm repeated material feed length: 0-9999 mm maximum cutting capacity (90°, round): 325 mm maximum cutting capacity (90°, rectangle): 500 x 300 mm right mitre cut (45°, round): 300 mm right mitre cut (45°, rectangle): 300 x 300 mm right mitre cut (30°, round): 200 mm right mitre cut (30°, rectangle): 200 x 200 mm left mitre cut (45°, round): 300 mm left mitre cut (45°, rectangle): 300 x 300 mm Depth of throat: 500 mm Max height of workpiece: 325 mm Sawspeed: 18 > 115 m/min Length of band saw: 4400 x 34 x 1.1 mm Length : 2680 mm Depth : 2350 mm Height: 1350 mm Weight: 1800 kg
Labeller Manufacturer BBK Type ESB 1207-1832 Suitable for self-adhesive labels The machine is used exclusively for applying lid labels to vials. Documentation available
The machine is in good technical condition, a visit and test drive is possible by prior arrangement. - Spindle passage 65 mm - without driven tools, with replaced bearings and belts.
Weinig Unimat 500 four-sided planer Working width 230mm Working height 140mm Number of spindles 5 Spindle system: Bottom 5.5kw Rights Left 7.5kw Top 11kw Bottom 5.5kw Feed speed adjustable by inverter up to 30m/min Feed motor 4kw Drive on cardan shafts Pneumatic clamps 3 axes controlled from the panel (width, height, pressure position) Worktop air cushions Input table length 2470mm CE Certified DTR documentation
The machine is in good technical condition, inspection and trial operation is possible by prior arrangement. Extraction and filtration system from the company Wemac spol. s r.o. Oil mist separator FILTERMIST FX-2002, serial number 065177, motor 0.55 kW Dimensions: L 2,980 x W 1,750 x H 1,750 mm Total connected load: 22 kVA, maximum power supply 3x 380 V Control system: FANUC 21iTB Weight: 2,200 kg Videos of the machine's ongoing operation are available.
The machine is in good technical condition, inspection and trial operation is possible by prior arrangement
Baguette Long Roller Width approx. 75cm with manual control with undercarriage mobile
Grinding machine Heesemann type EH52.13 Lw/Lk Bw Specifications: • Grinding width (mm): 1350 • Workpiece thickness (mm): 3 - 150 • Total grinding units: 2 • Longitudinal band: 2 • Contact roller diameter = 200 mm: 1 /15 kW • Combination unit: with small roller • Cleaning brush: 1 x diameter = 120 mm • Vacuum table • Intermediate varnish sanding • Table height constant •Carpet • Longitudinal unit, motor: 15 kW, 1.8 - 18 m/s • Feed: 3 - 12 m/min. • Sanding belt length longitudinal unit (mm): 2,100 x 1,400 • Pressure beam: CSD system, electromagnetic, wear-free • Conveyor belt: new • Availability: tested, in stock
Key data: 1350 mm, 3 , 170 mm
SPECIFICATIONS: Machining width: 1350 mm Processing height: 170 mm Sanding belt unwinding: 2620 x 1350 mm Digital touchscreen control 2 15 kW motors COMPOSITION: I Calibration roller Ø 160 (90 sh) II Calibration roller Ø 170 (60 sh) III Roller + Pad Ø 150 (30 sh)
Thread rolling machine ORT RP18 B 2-roll, overhauled, LOW PRICE The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy, Power (Ton): 18, Number of rollers: 2
Bread cutter with circular knife for cutting oven-fresh products without the use of oil! for approx. 35cm loaves of bread with approx. 25cm width and approx. 15cm height Lens thicknesses from 4-24mm selectable Output approx. 130 sections per minute with bread rack for bagging with safety cover completely stainless steel clad Dimensions: W 80 x D 70 x H 110cm
Availability: as of now Current format: 170 x 92 x 25 mm Performance: 40 cycles Step offshoot: yes Gluing machine: on request Machine is in good and functional condition according to its age
2 units available MHS Bread Slicer Type Ideal SB Year of construction 2011/2012 with circular knife 3 disc thicknesses selectable 8/10/12mm Output approx. 130 sections per minute with bread rack for bagging with safety cover Cutting possible without oil completely stainless steel clad 230V connection Dimensions: H 110 x W 90 x D 70 cm
"The machine from 1992 is still in productive use and will be available from week 35." More details please on request!
Weinig Unimat 500 four-sided planer Working width 230mm Working height 140mm Number of spindles 5 Spindle system: Bottom 5.5kw Rights Left 7.5kw Top 11kw Bottom 5.5kw Feed speed adjustable by inverter up to 30m/min Feed motor 4kw Drive on cardan shafts Pneumatic clamps 3 axes controlled from the panel (width, height, pressure position) Worktop air cushions Input table length 2470mm CE Certified DTR documentation
Skinner Maja -Type: BXM 554 -Power: 1.1 kW -External dimensions: 1900 x 1150 x 1230 mm -Cutting width: 554 mm -Belt width: 500 mm -Power supply: 400V 50Hz 3N -Weight: 370 kg -Quantity in stock: 1 -Condition: used in good condition
• Manufacturer: Hang (Constantin Hang GmbH) • Model: DT 106 (also known as 106 DT) • Machine Type: Paper Drilling Machine / Paper Punching Machine • Drilling spindles: 2 pieces, adjustable • Drilling diameter: 3 – 20 mm (standard up to 14 mm, optionally with hollow shank up to 20 mm) • Table size: approx. 110 × 68 cm (width × depth) • Max. drilling distance from the edge of the paper: up to 470 mm (face hole approx. 300 mm) • Max. stacking height: approx. 70 mm • Operation: Foot pedal (electric) • Connection: 380–400 V three-phase (3-phase) • Machine weight: approx. 250 kg • Condition: Used, technically checked, ready for immediate use
HAMBURGER LINE – HANDTMANN VF-612 + VERBUFA TYPE MBF-1 MACHINE AFTER GENERAL OVERHAUL YEAR OF PRODUCTION 12-2012 – START 2013 CURRENTLY UNDER TECHNICAL INSPECTION CONDITION OF NEW MACHINES WARRANTY FOR COMPONENTS AND MECHANICAL PARTS 3 - MONTHS
1.4-pocket folding station 2. 4-pocket folding station 1 x Cross Break
Key data: 1000 kN, 172 g/PS, 40 mm
Arburg 420C-1000-290 Injection Moulding Machine with sorting flap Number: 239 Availability: in stock Year of production: 2006 Producer: Arburg Screw diameter[mm]:40 Injection weight [g]: 172 Injection pressure [bar]: 1530 Clamping force [kN]: 1000 Gap spacing [mm]: 420 x 420 Plate size [mm]: 570×570 Min. Form Height [mm]: 250 Control Type: Selogica Tongue: German Installed power [kW]: 21.4 Working hours [h]: 95822 Weight [kg]: 3700 Dimensions [mm]: 4400 × 2000 Feed hopper: NO Robot Nest: Yes Core String: Yes
Key data: 600 kN, 132 g/PS, 35 mm
Arburg 320C-600-250 Injection Moulding Machine Number: 238 Availability: in stock Year of production: 2008 Producer: Arburg Screw diameter[mm]:35 Injection weight [g]: 132 Injection pressure [bar]: 1820 Gap spacing [mm]: 320×320 Panel size [mm]: 446 x 446 Min. Form Height [mm]: 200 Control Type: Selogica Tongue: German Installed power [kW]: 23.9 Working hours [h]: 76550 Weight [kg]: 2330 Dimensions [mm]: 3500×1500 Feed hopper: NO Robot Nest: Yes Core String: 1x
Control Siemens Sinumerik 840D Max. workpiece diameter: 250 mm Max. workpiece length: 1500 mm Max. workpiece weight: 150 kg Internal grinding device Paper Belt Filter Centering tip Diamond dressing tile Grinding wheel change aid
Perfect binder Master e Connecting bridge Speed: 1,000 - 6,500 cycles/hour Dedusting station with suction nozzle Output max.: 1,000 - 6,500 cycles/hour Product height: 140 - 435 mm Document width: 75 - 370 mm Speed (inline): 1,000 - 8,000 cycles/hour Gathering machine Sprinter 7010 (16 stations) 16 gathering stations Control: PLC Heavy Duty Back Machining Tool 18 brackets Furniture for small format Pressure station Electronic double-sheet inspection Product width: 105 - 320 mm Min. paper weight: 70 g/m² Fault sheet inspection Main milling machine Folding station Creasing station Cross-stack delivery Product thickness: 2 - 62 mm Manual docking station Max. layer thickness: 3 mm Clamp opening: 12 - 90 mm Hot Melt Back Tying Station PUR back binding Hot Melt Side Binding Station Envelope feeder 2 pressure stations
ED 300ECO Metal Lathe Motor 400W (S1) 230V 50Hz Dimensions in mm 760x230x254 Center width/height 300mm / 90mm Rotary spindle speed 50-2500 rpm Spindle bore 20mm Spindle mount MK3 Tailstock Cone MK2 Travel longitudinal slide 275mm Traverse travel cross slide and top slide 70mm Quill path 5mm Thread Metric in mm/r 0.5-2.5 max. tool holder 8mm Weight 48kg G&HM ED300Eco_2
used spiral mixer W&P UC80, for 80 kg flour per kettle, in baker's condition (good condition), extendable, 2 clocks, stainless steel kneading arm, with 1 stainless steel kettle, if required with up to 2 other kettles for 2.500€ each
NEW! Barth Novo Cito roaster Built in 1959, never unpacked and assembled. 5 kg roaster Barth Novo Cito in TOP condition Location: Germany, Ruhr area, near Oberhausen
Grinding wheel dimensions (od x id x width): Ø406 x Ø229 x 254 mm, Ø min/max to be rectified: 125 mm, Grinding wheel width: 254 mm, Maximum length to be rectified in plongeé: 254 mm, Drive wheel dimensions (OD x ID x W): Ø280 x Ø165 x 254 mm, Working wheel motor power: 30 HP, Total power: 34 hp, Dimensions: 2600 mm long x 1200 mm wide x 1200 high, Weight approx.: 5.500 Kg
PROBAT LE 3 3 kilograms electric with undercounter nostalgic shop roaster zu verkaufen / for sale PROBAT LE 3 3 kilo, electrical with wooden table, nostalgic shop roaster
Grinding wheel dimensions (od x id x width): Ø610 x Ø304.8 x 355 mm, Ø min/max to be rectified: 1.5 / 125 mm, Regulating wheel width: 355 mm, No. of regulating wheel speeds: infinite, Dressing speed: 225 min1, Dive (auto/manual): 254 mm, Regulating wheel dimensions (od x id x width): Ø355 x Ø203.2 x 254 mm, Maximum length to be rectified in plongeé: 254 mm, Grinding wheel head motor power: 30 kW, Power motor head regulating wheel: 3 Kw, Hydraulic motor power: 0,37 kW, Long: 5.175 mm, Width: 2.950 mm, Tall: 2.120 mm, Weight: 8.375 kg
Grinding machine Heesemann type EH31.11 Lk Bw Specifications: • Grinding width (mm): 1100 • Workpiece thickness (mm): 3 - 150 • Total grinding units: 1 • Longitudinal band: 1 • Calibration roller • Cleaning brush: 1 x diameter = 120 mm • Vacuum table • Intermediate varnish sanding • Table height constant •Carpet • Longitudinal unit, motor: 15 kW, 1.8 - 18 m/s • Feed: 3 - 11 m/min. • Sanding belt length longitudinal unit (mm): 1,900 x 1,120 • Pressure beam: CSD system, electromagnetic, wear-free • Availability: tested, in stock
Description SANDRETTO Micro 40T E injection molding machine SANDRETTO micro 40T E247 Clamping force : 40 T Version 2 GEFRAN Euromap 12 robot interface 4-way water box Socket table 1 core pull 4 heating zone
maximum number of results exceeded
please refine your search
