tetra pak machines used for sale

Spiral mixer / dough machine Model: SP 75 ECO sophisticated technology ... already proven many times over! Manual control 2 gears, 2 clocks/ timers Kneading machine for doughs from 6 to 120 kg / 4-75 kg flour Flour dust hood Stainless steel boiler and spiral Boiler capacity 175 litres mobile, with brakes only with us with DGUV V3 tested Dimensions: 800 x 1190 x 1280/1700 mm, WxDxH Connection 400V, 8.25 kW, 30Amp. 32A-CEE Plug Used machine overhauled with 3 months warranty + spare parts service Option: Delivery Maintenance contract Service Package E-Box Instruction & Commissioning We have a TOP selection of spiral mixers in stock!

Key data: 380 mm, 575 mm, 5000 1/min

Smooth G control Travel X/Y/Z/W 230/100/625/575 mm Main spindle Max. speed 5,000 rpm Main spindle spindle nose A2-6 Sub-spindle Max. speed 6,000 rpm Sub-spindle spindle nose A2-5 16-cavity tool turret, VDI 16 driven tool stations 5.5 kW Max. speed ang. Tools: 5,000 rpm Toolsetter Parts catcher Full C-axis on main and counter spindle Cylinder interpolation Synch. Tapping Preparation Renishaw OMP Conveyor Interface for bar feeder 15 bar high pressure pump

VIET CHALLENGE 211B 1100mm calibrating machine with 2 belts: – 1st calibrating roller belt – 2nd sanding roller belt – pneumatic on/off of the rollers, from the control panel – cleaning blowers on both belts – 2620x1130mm abrasive belt development – belts with single motor 11 kW / 15 HP – rubberized pressure rollers – automatic table positioner, with digital reader – Advancement mat in good condition – variable belt feed speed – front and rear support roller conveyors Machine according to CE regulations

IDM manual edgebanding machine for shapes model KOMPACT according to CE standards

Built in 1995 Pallet wrapping machine Stretch line Computer control photoelectron. Stack Scanning Drive-on ramp Delivery date: immediately Price on request. We supply and install worldwide.

with 4 capping heads Type: 97 Capacity: approx. 8,000 - 10,000 bph

Verboom PN5 Left Brand: Verboom Type: PN5 Left Year of construction: Standard: EU conformity (SHA tested) Machine Data: Saw: 2.2 KW positioned over the product Spigot heads: 2 2.2.kW, handwheel adjustable spigot heads positioned on top of each other and positioned by means of Siko analog-digital readout. 1e Vertical spindle: 5.5 kW direct drive spindle: 20040 mm and position with manual positioning and analog-digital readout. 2e Vertical spindle: 4.0 kW direct drive spindle: 120mm and position with manual positioning and analog-digital readout. Table: Manuel, with clamping Extendable length stop Stroke can also be used as miter stroke Dimensions: 3.5(0.9+0.9)1.6m

Code: 0134 Brand: BRANDT - GERMANY Model: KTD 53 Automatic edge bander for wood, pvc, veneer, furniture, custom furniture, joinery and various Technical data: Min/max panel height mm 10/40 Edge thickness min/max 0,4 - 1,5 mm Feed speed 7 mt/min on motorized roller conveyor Min panel width mm 65 Composition: Gluing unit Cutting shear unit End cutting unit Upper/lower trimming unit Wheels on base for easy handling Volt 380/50 Total power Kw 4,5 Compressed air 6 bar Overall dimensions mm 1800 x 615 x 1170 h Weight kg 280

Key data: 2580 mm, 150 mm

BOERE KSM 1 Edge Grinding Machine Brand: BOERE Type: KSM-1 M-No.: Year of Make: 2006 Data: Length of work tables: 900mm Width of work tables: 400mm Table level: Height adjustable Dimensions: 1,7007501,250mm Scjhleifa unit inclination: 0-60° Abrasive belt: 2580150mm Grinding spindle: ø mm Main drive: 2.2 KW Oscillatation sanding belt: 0 - 25 mm - 0.37 KW Weight: 260 KG Press: 6 bar

Samco Unilev Edge Grinding Brand: SAMCO Type Unilev M-No.: 1887 Year of manufacture 1989 Data: Length of work tables 1440mm Width of work tables 710mm Tilt adjustment 0-30° Sanding belt: 2170150mm Main drive: 3 KW Oscillatation sanding belt 0 - 25 mm Weight: 400 KG Press 6 bar

Cutting machine POLAR 58 EM Built in 1993 Art.Nr. L1017

Key data: 630 mm, 250 mm, 8 kW

Hofmann D632 Thickness Planer Brand: Hofmann Type D632 M-No.: 2533 Year of manufacture 2005 Main motor 7.5 KW - 400 V Speed 5,000 tpm Knife shaft Z-4 Circle ø125 mm Planing width 625 mm Planing thickness 3.5 - 275 mm Spahn removal max. 8 mm Thickness table length 1,000 mm Feed rate 7-14 m/min. Weight 980 KG

SPECIFICATIONS: Working width: 420 mm Feed speed: 6 m/min Voltage: 230 V

Used spiral mixer DIOSNA, type: SP 80 D -completely overhauled- - for 80 kg of dough or 50 kg of flour - Stainless steel spiral - Stainless steel boiler - 2 Time clocks - 2 speeds - 1 reverse gear - Emergency stop switch - With center wheel for driving the machine - Kettle and kneading arm without Riesse - new electrics, new V-belts, repainted -El. Connection: 400 V, 3PH, 50 Hz, 14 A - Motor: 6 kW - Condition: Very good condition - 6 months warranty A video of the machine in operation can be made on request. Inspection and test run are possible by arrangement.

Key data: 400 mm, 2100 mm, 3 St.

SPECIFICATIONS: Table dimensions: 2100 x 400 Roller with 3 knives EQUIPMENT: 01 Knife adjustment device 03 Spare blades

Used Empak closing / capping machine, type TZZ.

Max. size= 65 x 52 cm, Availability= 062025, 4 fold pockets automatic folding pocket adjustment Flexible knife folding unit Gremser flat pile feedersheet movement monitoring double sheet control Up to 30 folding jobs can be saved shingle delivery Format: max: 520x650mm min: 100 x 120 mm, smallest fold length 35 mm LOT Loaded in truck or container

MAX DIAM 250 X 2000

Used EMPAK EA-1 labeling machine for automatic application of self-adhesive labels to all types of cylindrical packaging. Technical data: Max. label dimensions length limited by package size width up to 120mm Label reel dimensions Internal diameter 40mm Outer diameter up to 300mm Max. efficiency. Up to 6000 packages/hour Package diameter up to 80mm Power supply voltage 3N~50Hz 220/380V TN-S Overall dimensions 1500x700x900 mm weight 130kg.

Deritend rotary boardcutter workingwidth 130 cm automatic vacuum feeder by hopper 7 sets of rotary knives

BYSTRONIC Byspeed 4020 laser cutting machine was built in 2007 by the Swiss brand BYSTRONIC. The machine, designed to meet the highest industrial standards, is used for precision cutting and engraving of workpieces with a maximum thickness of 20 mm. The machining process is performed by a stable laser beam with a maximum power of 4.4 kW, which is generated by a reliable laser source of the highest energy efficiency. In turn, the operator’s daily work is facilitated by an intelligent CNC control with many useful functions. All this makes the offered BYSTRONIC laser the perfect choice for any industrial plant. The last inspection of the machine was done in 2024. The Byspeed 4020 laser cutting machine weighs 19000 kg. Technical specifications of the BYSTRONIC Byspeed 4020 laser cutting machine - CNC controller: BYSTRONIC ByVision - laser power: 4.4 kW (4400 W) - laser type: CO2  ...

BYSTRONIC ByStar 4400 laser cutting machine was built in 2006 by the Swiss brand BYSTRONIC. The machine, designed for precision cutting and engraving of sheet metal, is an excellent choice for any industrial plant. The machining process is performed using a stable 4.4 kW laser beam, which is generated by a resonator of the highest energy efficiency. As a result, the edges of the machined workpieces stand out for their unprecedented smoothness and lack of unevenness. ByStar 4400 laser cutting machine is offered with a range of equipment, including among others an intelligent CNC control and a KELLER industrial dust collector. The machine has undergone regular inspections and is ready for further use. BYSTRONIC laser weighs 13500 kg. Technical specifications of the BYSTRONIC ByStar 4400 laser cutting machine - CNC controller: BYSTRONIC ByVision - laser power: 4.4 kW (4400 W) - max ...

CNC Turning lathe LEADWELL T-6

Key data: 6 , 190 mm, 120 mm

SPECIFICATIONS: Feed length: 1900 mm Machinable width: 190 mm Machinable height: 120 mm Spindle Ø 35 mm Number of Spindles: 6 Chain drive SPINDLE CONFIGURATION: Bottom (3 kW) Right (2.2 kW) Top (4 kW) Bottom (4 kW) Right (4 kW) Left (4 kW)

It is a used, reconditioned WP conical rounder CR 59 H for sale. The conical rounder was completely dismantled and rebuilt, the bearings have been renewed. The gutters and the cone have been newly Teflonized to a high standard. - with lubrication - with heater and blower - Input: 6 a.m. / Output: 12 p.m. A video can be sent on request. Price on request.

It is a used Kemper head machine Quadro-Round for sale. The machine is functional. For the production of rustic, square and round buns. Price on request.

Max. size= 51 x 35 cm, Availability= 062025, Booklet making system with folding-stittching-trimmer Max. size 51 x 35 cm The line is consist of: 1 x collating tower DC-10000S with 10 suction stations format A3/A4/A5; right-delivery,DC 480 JV jogger, 1 x stitching and folding unit DBM -200 with automatic format setting with 2 stitching heads Hohner 1 x trimmer DC – 48TW; compressor, delivery LOT Loaded in truck or container

Grinding area: 800 x 500 mm Travel X/Y: 1200 x 450 mm Max. workpiece height: 400 mm Grinding wheel dimensions: 400 x 50 x 127 mm Grinding spindle speed: 3600 min-1

Buser Rotary Printing Machine (Switzerland) Model: CH-3428 Type: R5B E 1850/24L Year: 1997 Printing: Blades Blanket newly installed Conveyor in Good condition Colours: 24 Open Bearing with Repeats: 640, 720, 820, 914, 1018 Repeat Gears: all Repeats 12 sets available Sequgee: Different Sizes (1 Lot) Entry with Dust Suction Slot High Efficiency 3 pass Two Dryer Chambers with Gas Heated Sequgee Washer 01 Set Screen Washer 01 Find more here - / Contact us at -

High performance ultrasonic banderoling machine, arch size 700 X 750 mm, 30 mm band wideness. The US-2000 AST-MDM enables high perfomance. With the dynamic high-speed band feeding and the withdrawal by a brushless motor, the machine processes up to 30 bandings/min. Thanks to the packet height detection, the product memory and the band cen- tering, the banding happens very gentle and on the exact position. Postal packages can thus be banded very tight and without dama- ging the edges. The AST aggregate operates wear-free. Checked and serviced.

High performance ultrasonic banderoling machine, arch size 700 X 750 mm, 30 mm band wideness. The US-2000 AST-MDM enables high perfomance. With the dynamic high-speed band feeding and the withdrawal by a brushless motor, the machine processes up to 30 bandings/min. Thanks to the packet height detection, the product memory and the band cen- tering, the banding happens very gentle and on the exact position. Postal packages can thus be banded very tight and without dama- ging the edges. The AST aggregate operates wear-free. Checked and serviced.

Presse à injecter DEMAG ERGOTECH 330 T en bon état? Référence : Ergotech E330-1450-NC4S? Année: 1998? 65 000 heures de fonctionnement ? Diamètre vis : 70 mm? Rapport L/D : 20? Volume injectable : 1039 cm3? Poids injectable en PS : 940 gr? Pression d'injection : 1400 bars? Course de dosage maxi : 270 mm?P uissance de chauffe : 27 KW? Dimensions des plateaux : 1040 x 950 mm? Distance entre colonnes : 710 x 630 mm? Epaisseur moule : 330 - 710 mm? Course d'ouverture maxi : 675 mm + Robot SEPRO type 3031 YN MPA II? axe X : 2500 mm? axe Y : 800 mm? axe Z : 1400 mm Dimensions de la machine : 6,50 x 2,00 x 2,30 m? Poids de la machine : 14 300 kg

Bekum BA 52 Blow Moulding Machine Stations: Single Clamping Force: 450 kN Control: Original Bekum Extruder: S 701 Head: 6 Litre Accumulator-Head new Max. Bottle volume: 60 Litres Mold Dimensions (Length/Width/Depth):1200/750/2150-300 (mm)

Souffleuse - machine d'extrusion soufflage BEKUM BA 200 Tête D'accumulation de 8 l 1 tete et 1 station Matériau transformé: PE Capacité de production: 500 kg / h Type d'extrudeuse: Accumulator Rsbpmev Hpnre If Hisu Nombre d'extrudeuse : 1 Diamètre de la vis : 120 mm Rapport L/D: 24 Contrôle de l' épaisseur: oui alimentation matière Course d'ouverture : 710 mm Force de serrage : 800 KN

Format 115 X Program Colour monitor Air table Side table on the right Polar Mohr LW 1000 Stapellift left Spare blade approx. 828 T Sections

DEMAG ERGOTECH EXTRA 80-430 injection moulding machine was built in 2003 in Germany by Demag Ergotech Wiehe GmbH (now Sumitomo (SHI) Demag Plastics Machinery GmbH). The machine is designed for the economic production of plastic parts of different colours, shapes and sizes, using the injection moulding method. This method involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 80 tonnes, guarantee high repeatability of the manufactured parts. The DEMAG ERGOTECH 80-430 EXTRA injection moulding machine weighs 3600 kg. Technical specifications of the DEMAG ERGOTECH EXTRA 80-430 injection moulding machine - maximum mould clamping force: 80 t (800 kN) - screw diameter: 40 mm - screw length/diameter ratio: 20 L/D - maximum injectio ...

OKUMA MA-50 HB CNC horizontal machining center was built in 2000 by the Japanese corporation OKUMA. The machine, designed for advanced machining of workpieces with a maximum weight of 800 kg, is distinguished by its high reliability, efficiency and precision. The machining process is performed fully automatically by means of a high-speed spindle and cutting tools taken from a 40-position magazine. What’s more, the automatic pallet exchange system allows for simultaneous loading and unloading of workpieces during the machining process, reducing machine downtime to a minimum. The MA-50 HB CNC machining center is offered with extensive equipment, including among others a rotary table and an advanced CNC control with an intuitive interface. The total weight of the machine is 21000 kg. Technical specifications of the OKUMA MA-50 HB CNC milling machine - feed in the X/Y/Z axis: 700/800/7 ...

Year: 2008 - technically efficient, ready to work – after full service - chiseling up + down - PLC control - feeding table

Fully Automatic Slicer Packaging Line Cutting / Depositing / Packaging KUCHLER S.A.M. P2 Specifications: Slicer type: SAM P310 f v Type Foil Dispenser: SAM KP 21 Airless Type Packer: SAM IL - 4 - 220 Airless Type Labeler: Mettler Toledo UC-GTT-M 400 Volt / 50 Hz / 3.79 A Year of Make: 2014 Foil size: 21 x 26 & 21 x 21 cm several layers on top of each other can be welded Output up to 150 parcels per hour Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife, Teflon-coated New price in this version approx. EUR 55,000 Function checked, machine ready for immediate use! Condition, see original pictures! If you have any questions, email or call.

Weinig Unimat 17 four-sided planer Working width 170mm Working height 140mm Number of spindles 6 Spindle arrangement Bottom 5.5kw Right 5.5kw Left 5.5kw Top 7.5kw Bottom 5.5kw Universal 5.5kw Adjustable heads Feed speed adjustable via variator 6-36m/min Drive on cardan shafts Feed motor 5.5kw Pneumatic material clamps Total power 41kw

(showroom machine) Main Technical Data Number of Spindles: 4 spindles Gundrilling Diameter Range: 4 - 20mm Working Method of Tool: Rotating Working Method of workpiece: Rotating Clamping Method: Clamping Cone Max. Drilling Depth: 800mm Workpiece Max.Outer Diameter: 300mm Drilling Feedrate: 1-180mm/min Spindle Center Height: 220mm Spindle Distance: 158.75mm Control System: SIEMENS 828Dsl A.C. Spindle Motor Power: 2×15 kW Spindle Speed (Infinitely Variable): Max.5000 RPM Tailstock Spindle Speed: 70rpm Rapid Traverse Speed: 6000mm/min High Pressure Pump Motor Power: 4×7.5 kW Coolant Flow Rate: 4×46 L/min Filter accuracy: 20µm Max.Coolant Pressure: 100 bar Oil Tank: 1200L Weight of Machine: 10000 Kg. Electrical Supply:  ...

Logopak 410 IIIF Labeller Serial: LP10021552 Logopak print and apply labeller, mounted on variable speed conveyor, conveyor 700mm x 300mm, previously used on labels 100mm x 60mm,

Clamping force: 1250 kN Ø worm: 35 mm Column spacing: 470 mm Injection weight: 142g Min. mould height: 300 mm Total weight: approx. 6,000kg

various wire spools for calendars/exercise books for production. Different Wire-O coils 2:1 (different colors, different plastic rollers for spiralization). Calendar brackets, shafts

1 used ELB SURFACE GRINDER Model: SWBE 010 NPC-K Grinding area: 1000 X 550 X 400 mm Year of Make: 1988 Grinding wheel:  400 X100 X 127 mm ACCESSORIES Electric straight-line dresser with compensation Electro-Permian Magnetic Clamping Plate 1000 X 400 mm (SAV) Magnetic adhesive force control Universal Paper Belt Filter Grinding wheel with holder

Inv. Num. : 7215 Type: ENSIS 3015 AJ Producer: AMADA Created: 2021 Parameters: Laser ON: 9348 h Beam ON: 7276 h Laser power: 6 kW Feed length X-axis: 3000 mm Y-axis feed length: 1500 mm Feed length Z-axis: 100 mm Machine weight: 9500 kg

1.0 pcs IML Brewing System with Removal Unit, Stacking Unit and with IML Vision Inspection System for 4-Compartment Cavities Tool Manufacturer: Beck Automation AG Type: B4 Year of Make: 2019

Tränklein banding machine ZW-D 500, with cardboard device, machine number 2967, year of construction 1986, machine is in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. Iobr Sbsvvirij Ta Ejau You are welcome to visit the machine in our house by prior appointment.

1.0 pcs IML Brothers - System with Removal Unit, Placement on Conveyor Belt for horizontal stacking injection mould 32 - cavities Manufacturer: Beck Automation AG Type: B32 Year of Make: 2019

Tränklein double corner round machine, machine is in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. Isbovvi Epjr Sb Ta Esau You are welcome to visit the machine in our house by prior appointment.