tetra pak filling used for sale

Tetra Top Sprue Remover Unit (SRU) for removal of the small plastic particle on top of the Tetra Top packaging after filling/closing, previously positioned after a Tetra Pak TT/3 2000 carton filler for Tetra Top 200 and 250 ml Mini cartons with a A5 38 screwcap. Including stainless steel control panel and separate operation panel., Type of Machine: Sprue Remover Unit, Capacity: 4.500 pieces per hour, Type of carton: Tetra Top 200 and 250 ml Mini cartons, Development step: - 0100, Drawing spec.: 3434618-0100, Weight: ± 325 kg

Unused Servo Control for a Tetra Pak Cap 30 Flex. Tetra Pak article number: 90605-9390. Official Tetra Pak description: Servo-Antrieb, K5500 EtherNet/IP 528VAC., Type of Machine: Servo drive, CAT NO: 2198-H025-ERS, Instructions: 2198-IN001x-xx-x, MAC Address: 40:41:01:E0:74:10, Main input: 195-264/324-528 Vac 8.3 Arms 3 Ph 50/60 Hz, Control input: 24 Vdc 2.8A, Motor output: 0-460 Vrms 3 Ph 0-590 Hz 8 Arms Continuous, 20 Arms Peak

Tetra Pak Capper 60 Cap applicator, previously used for Tetra Top 200 and 250 ml Mini cartons with a A5 38 screwcap. This cap applicator was running in combination with a Tetra Pak TT/3 2000 carton filler. The applicator has a small footprint. Number of productions hours: 5.015 h. Applying caps quickly and accurately. The Tetra Pak Capper 60 uses a feeding screw and six torque- and speed-adjustable rotary capping heads to apply caps on stationary packages. Change package heights within the same bottom format in only five minutes. Control panel with Allen-Bradley CompactLogix L36ERM PLC and separate operation panel with Tetra Pak touch screen panel. The production capacity goes up to 4.500 packs per hour. Including collecting vat and elevator ( Bonino, Auxiliary Feeder, code nr 57822, date 2019 ). Including all available manuals and all programs (language in program English and Swedish).  ...

Unused Complete Outlet Triclamp including Outlet Pipe + Sleeves + Impellors Tetra Pak BM618 / BM714 Bactofuge, Machine unit number or subassembly description: 562012-03 according outlet device drawing., Type of Machine: Complete outlet

Tetra Pak Tetra Spiraflo Tubular Heat Exchanger (THE) previously used in a dairy for whey protein as pre-heater with indirect hotwater preparation (15 - 70 °C), holding section (1 - 3 minutes) and cooling section (65 - 10 °C)., Unit exist out of:, - 7x tubes for pre-heating (Tetra Pak MT-38/1x20s-6, total surface area: 2,25 m2, product connection DN25, hotwater connection DN20 with indirect hot water system with plate heat exchangers, pumps (CH18-10 A-W-G-BQQV - 7,5 m3/h - 0,72 kW), steam valves (Samson), expansion vats, manual valves and interconnecting piping., - 9x tubes for cooling (Tetra Pak MT-70/4x16s-6s-1, jacket: 20 bar - 110°C - 16 liter, inside: 50 bar - 110 °C - 3,6 liter, total surface area: 10,17 m2, product connection DN38, (ice)water connection DN50)., - Flowmeter (Endress+Hauser - Promag 300)., - Holding tube, DN 40 (6x 6 meter), complete with bracket and swivel bend ...

Unused Inlet Device, Clamp coupling for Tetra Pak 618 - 718 - 818 Separators., Ref 22 - Part No 548412 01 - Inlet housing, Ref 23 - Part No 538247 04 - Clamp coupling, Ref 24 - Part No 538248 03 - Gasket, Ref 25 - Part No 541709 80 - Elbow pipe, Type of Machine: Inlet device, clamp coupling

Unused Outlet Pipe + Sleeves + Impellors of a Tetra Pak HMRPX 618 Separator., Ref 1 - Part No 540493 02 - Outlet pipe, Ref 3 - Part No 581978 01 - Guide sleeve, Ref 16 - Part No 540527 02 - Impellor bottom part Ø 140 mm, Ref 20 - Part No 540519 02 - Impellor top part Ø 140 mm, Ref 26 - Part No 540551 01 - Spacing sleeve, Ref 38 - Part No 540528 02 - Impellor bottom part Ø 120 mm, Ref 40 - Part No 540520 02 - Impellor top part Ø 120 mm, Type of Machine: Outlet set

Tetra Pak automatic direct standardisation unit which is designed to handle skimming of whole milk and standardisation of cream or standardisation of both cream and milk. Skid mounted unit including PD340 Magnetic flow transmitter for standardised milk, PD340 Magnetic flow transmitter for cream remixing, PD340 Magnetic flow transmitter for standardised cream, density transmitters, valves, some interconnecting piping and a control panel with recorder of fat content, display for flowtransmitter and Alfa Laval Alfast Operator Panel. Previously used in combination with an Alfa Laval HMRPX 714 HGV-74C milk skimmer separator (20.000 liter per hour)., Additional features:, Some clamps for connection / piping are missing., Type of Machine: Standardisation unit for milk, Capacity: 20.000 ltr/h, Weight: ± 500 kg, Dimensions: ± 120 x 120 x 220 cm

Unused Tetra Pak Pressure Gauge, 0 - 10 bar / 0 - 1.0 MPa., Model: 233.50.100 LBM 990.22 1 1/2 Tri-clamp 10bar/MPa., Part No: 90522-0172., Type of Machine: Pressure Gauge

Tetra Pak desserts pilot UHT plant with an pasteurisation, indirect and/or direct (VTIS) heating module @ 225 ltr/h and only a pasteurisation step @ 125 ltr/h, previously used in a R&D centre for desserts., Indirect unit, skid mounted, including:, - Open level tank, serial number: DFB-5259-BT01, year 2008, 50 ltr with propellor agitator (Lightnin ECL-M59-25)., - Feed pump (mono / screw pump, Netzsch, NM031BH02S12H, serial number 387231, year 2007, 120 - 300 ltr/h, speed 20 - 80 rpm, discharge pressure 2 bar, product temperature 5 - 20 °C)., - Lobe pump, Alfa Laval, SRU1/005/LD, serial number 431441, year 2008, motor: 0,37 kW, 400 V, 50 Hz, n1: 1.360 rpm, i: 15,57 n2: 89 rpm., - Heating module A, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17997., - Heating module B, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17999., - Heating module C, centrifugal pump: Al ...

The Tetra Pak TBA 9 is a type of filling machine designed for the aseptic packaging of liquid food products. Here are some key details:, - Type of Packaging: The TBA 9 is known for its ability to handle a variety of liquid products, such as juices, dairy, and sauces, using Tetra Paks carton systems., - Capacity: This filler typically has a capacity range suitable for small to medium production lines. It can fill various carton sizes, including the 200 ml format., - Aseptic Technology: The TBA 9 uses advanced aseptic technology to ensure that products are safely packaged without the need for preservatives, extending shelf life while maintaining product integrity., - Features:, - High efficiency and low waste during the filling process., - Flexibility to switch between different carton formats and sizes., - User-friendly interface for easy operation and monitoring., - Applications: Ideal f ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

Aseptic carton filler line previously used for the filling of aseptic juices in cartons. The Tetra Pak Tetra Brik Aseptic 8 (TBA 8) aseptic carton filler is designed for 1.000 ml Square cartons. Controls: 110V. Drawing spec: 648022-1100. Production hours: 74.693 hours. The machine has been running in in a juice factory in Europe. Line dismantled in KW 13 - 2026 and is now located in the warehouse of Hamburg Machinery in Germany. Including reel lifter and instruction manuals., Type of Machine: Aseptic carton filler, Capacity (Units): 5.500 cartons per hour, Packaging: 1.000 ml Square, Product: Juices, Controls: 110 V, Conveyors: No, Accumulator: No, Cap Applicator: No, Card board packer: No, Working Hours: 74.693 h, Electric: 400/230 Volt - 50 Hz

Equipment: Insulation,Manufacturer: Tetra Pak Processing,Condition: used,Other: 8 minutes Hot holding Pipes DN 80 Length: 647 meters Manufacturer: Tetra Pak Weight approx. 7 t ,Remarks: Wall thickness of the pipes 2mm (1.7mm in the bend area) 6 height-adjustable feet Smaller dents in the insulation jacket Insulation jacket is no longer present in 2 parts (see photos),last use: dairy,Nameplate: No,Insulation: available,material insulating jacket: stainless steel,material pipes: AISI304 (V2A) 1.4301,total height: 3.200,total width: 1.550,total length: 6.530

Gouda Euroblock Cheese Production Line for Sale due to the installation of a larger cheese production line within the existing cheese factory. The plant was designed for a milk intake capacity of approximately 100.000 litres per day, producing around 10.000 kg of Gouda cheese per day. The line manufactures Gouda cheese in Euroblock format, with dimensions of 500 x 300 x approximately 100 mm and an average weight of 15 kg per block. This corresponds to a daily production of approximately 650 Gouda cheese blocks., The production line consists of the following main components:, - 2 x Closed Cheese Vats with Whey Extraction Sieve., Manufacturer: Tetra Pak Tebel, Type: OST IV, Year: 1991, Capacity: 8,000 litres each, Cheese Vat 1:, Stocknumber: #1005, .hamburg-machinery/listings/4811812-used-cheesevat-tebel-tetra-pak-ost -iv, Cheese Vat 2:, Stocknumber: #1006, .hamburg-machinery/listings/4811 ...

Aseptic carton filler line previously used for the filling of aseptic milk products in cartons. The Tetra Pak Tetra Brik Aseptic 8 (TBA 8) aseptic carton filler is designed for 1.000 ml Square cartons. Controls: 100V. Drawing spec: 648022-1001. Production hours: 69.621 hours. The machine has been running in in a juice factory in Europe. Line dismantled in KW 13 - 2026 and is now located in the warehouse of Hamburg Machinery in Germany. Including reel lifter., Additional features:, 1x Drive gear is missing below the folding station. List with article numbers can be send on request., Type of Machine: Aseptic carton filler, Capacity (Units): 5.500 cartons per hour, Packaging: 1.000 ml Square, Product: Juices, Controls: 100 V, Conveyors: No, Accumulator: No, Cap Applicator: No, Card board packer: No, Working Hours: 69.621 h, Electric: 400/230 Volt - 50 Hz

Used Used Blow Moulding Machine Terta Pak Dynablow db 30: Year: 1998 Condition: As Is Used Blow Moulding Machine Terta Pak Dynablow db 30: Year: 1998 Model: DYNABLOW DB 30 Speed: 3.000 Bph Number of cavities: 3 Type: Linear Compressor NOT included Chiller NOT included Safety protections Code: W 90 More details: https://bottlingscout.com

Sterilizer Tetra therm aseptic flex NG - 6.3T UTH with homogenizerTechnical Specifications & Performance DataThis UHT system with integrated homogenizer is engineered for continuous ultra-high temperature processing in beverage production and industrial packaging environments. The unit belongs to the 6.3T capacity class and is suitable for aseptic downstream filling as part of a used bottling line or as a second hand standalone processing module. Designed to reach high sterilization temperatures, it ensures product safety and extended ambient shelf life when combined with aseptic handling.Process type: Continuous indirect UHT treatment with integrated homogenizationThroughput class: 6.3TMaximum process temperature: Up to 144°CConfiguration: UHT module plus homogenizerOperation: Continuous processing for high uptimeBuild: Industrial, hygienic design suitable for beverage and dairy applic ...

The Tetra Pak Almix - Scanima Pilot Plant Mixer SPM-100 is a versatile vacuum processing system designed for pilot plants, product development and small-scale industrial production. It combines vacuum mixing, powder induction, high-shear homogenisation, heating, cooling and automated recipe control into one compact unit, making it ideal for producing a wide range of dairy, beverage and food products.The mixer is equipped with an integrated vacuum system that creates a controlled vacuum inside the vessel before and during processing. Operating under vacuum significantly improves powder incorporation by eliminating air, reducing foam formation and preventing oxidation. Powders such as milk powder, proteins, starches, sugar, cocoa, stabilisers and emulsifiers are drawn directly into the liquid through the integrated powder funnel, ensuring rapid wetting and lump-free dispersion while minimi ...

Continuous vacuum filler for straight filling, portioning, and twisting All in one 80 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 4 KW Machine dimensions in cm: Width: 90 Length: 70 Height: 160 Delivery time: 20 working days after advanced payment

Used Used Filling Syncrobloc CFT Isobaric 30.30.6 12.000 bph: Year: 2017 Condition: As Is SYNCROBLOC FOR LABELING AND BEER BOTTLING IN GLASS Model: CFT S 94 / A Production Capacity: Up to 12,000 bottles/hour Container Types: ? 0.33 L glass bottles (long neck and champagne type) ? 0.75 L glass bottles (champagne type) Supported Caps: ? Crown ?26 mm on 0.33 L long neck bottles ? Crown ?29 mm on 0.33 L champagne-type bottles ? Crown ?29 mm on 0.75 L champagne-type bottles Labeling: ? Self-adhesive front and back labels for 0.33 L long neck bottles ? Wrap-around self-adhesive labels for 0.33 L and 0.75 L champagne-type bottles PE LABELER Maximum Output: ? 12,000 bottles/hour without orientation ? 11,000 bottles/hour with orientation Operation: ? PLC + touch-screen panel for control ? Automatic speed adjustment via inverter and sensors ? Status indicator column light Main Components: ? 4 self ...

Ultrasonic tube filling and sealing machine with the following equipment: - Basic machine - Blank tube magazine incl. tube feeding chute for autm. Entering the blank tubes - automatic tube alignment according to the typeface or identification mark - Ultrasonic capping unit for closing PE and laminate tubes - Coding device on the tube fold, one-sided, incl. 4 set of coding numbers (0-9) - Cutting device on the tube fold - 1 format set for PE tube size D.35 mm - Format range 19mm - 50mm tube diameter - Cycle rate 15 - 30 tubes/min. Depending on product Please also note our current machine offers ( NEW + USED ) on Resale under : abc://abc.resale.de/angebotelinkd-user.php?myid=35837&dealer=1&order=1 & abc://abc.resale.de/angebotelinkd-user.php?myid=35846&dealer=1&order=1 & Visit us also on : cbv-pack

Ultrasonic tube filling and sealing machine with the following equipment: - Basic machine - automatic tube alignment according to the typeface or identification mark - Ultrasonic capping unit for closing PE and laminate tubes - Coding device on the tube fold, one-sided, incl. 4 set of coding numbers (0-9) - Cutting device on the tube fold - 1 format set for PE tube size D.35 mm - Format range 13mm - 50mm tube diameter - Cycle rate 10 - 15 tubes/min. Depending on product and operator Please also note our current machine offers ( NEW + USED ) on Resale under : abc://abc.resale.de/angebotelinkd-user.php?myid=35837&dealer=1&order=1 & abc://abc.resale.de/angebotelinkd-user.php?myid=35846&dealer=1&order=1 & Visit us also on : cbv-pack

Gable top Filling Machine with Capper Made by ELOPAK for Sale Item #: Usm-166 Category Gable Top Machines Gable top Filling Machine with Capper For Sale (ELOPAK) Type: Cold Filling for Fresh Milk/Juices Year of manufacturing 2005 Machine Brand: Elopak Made in Japan Machine Condition: Excellent Spare parts: Large qty spare parts available with machine

USED KRONES GLASS BOTTLE FILLING LINE Item #: Usm-185 Category PET Filling Lines We Sell Glass bottle Line KRONES monoblock 1-KRONES monoblock - vacuum filler 4000 LPH, capping machine Al cap MCA 28, exclusively for still drinks (juices, syrups, alcohol) -relatively few hours of operation, control unit replaced -accessible accessories for glass bottle 200ml, 700ml & 1000ml 2-KRONES Binetta labeling machine, one label (possible and neck), 0,2 – 1 l volume. -accessible accessories 3-RINSER for glass bottles 4-Some conveyor belts. 5-Sleeve Machine, Sleeve Machine with electric tunnel Condition: Very good condition. All caracteristics you can see on pictures

USED SIG CFA 406 FILLING LINE FOR SALE Item #: Usm-184 Category Sig Combibloc We have SIG Combibloc 2L machine CFA 406 Filling Line For Sale: CFA 406 filler, year 2004, working hours 33411 Sterile air system- 2004 Evacuation table- 2004 Buffer table- 2004 Closures Applicator- Combiswift type of closures- 2002 Tray packer- 2004 Conveyers

2 x in stock

USED EVERGREEN GABLE TOP FILLING AND CAPPING MACHINE YEAR 2007 Item #: Usm-210 Category Gable Top Machines Evergreen GTL-30 Gable top Filling Machine, Year 2007, Speed 2400 Packs per hour, cold filling for fresh products

2020 Viscotec Semi-automatic syringe filling system for dronabinol. The filling system is equipped with a storage container for heating the dronabinol to 60 – 70° C and keeping the Temperature constant during the filling process. The syringe is filled through the syringe tip and under a protective gas atmosphere (e.g. argon). No air should remain in the syringe. The filling system is suitable for the filling amounts of 265 mg, 530 mg or 1060 mg with tight tolerance limits. The dosing accuracy of the Pharma Dispenser 3VHD8 (0.35ml / U) amounts 1%. The repeat accuracy is > 99%, depending on the material. Detailed material data are currently not available. The determination of the actual dosing accuracy and dosing time takes place during commissioning. The customer is taking care of the process development. The storage container has a capacity of 500 ml and withstands a pressure of 0  ...

The system can be used for granulate, reground, agglomerate or powder, Including: hopper, injector, blower and piping length bespoke to your project., blower of suitable power, Cyclone with filtering system and a diverting valve Constructed in sturdy painted steel or galvanized steel The supporting structure can hold 1 or 2 big bags, Possible addition of weighing system for each big bag

Output: 40000 U/h // Bottle Size: 0,5

BAG FILLING STATION WITH LIFTING AUGER, single or double bag filling station for 1000 kg. (apprx) big bags, all made in sturdy carbon steel structure

Used Used 12.1.1 Monoblock Filling: Condition: As Is Used 12.1.1 Monoblock Filling: Speed: 2500 BPH Direction: clockwise For glass bottles FILLER 12 valves Filling type: light vacuum Valve type: mechanical SCREW CAPPER Single-head Cap size: ? 31.5 mm x 24 mm (h) Manual height adjustment T CAPPER GENERAL DATA Machine dimensions: 2500 mm x 1500 mm x 2500 mm (h) Safety protections Code: QT 730 More details: https://bottlingscout.com

Used Used filling monoblock Cobert 16.1: Condition: As Is Used filling monoblock COBERT 16.1 Speed: 2.500 bph Filler 16 valves | Gravity filling Single head corker | Natural Straight Cork Safety protections Code: QT 670 More details: https://bottlingscout.com

Used Used filling monoblock Bertolaso 54.75.12.12: Condition: As Is Used fiilling monoblock BERTOLASO 54.75.12.12 Speed: 15.000 bph. Direction: Clockwise. Rinser 54 clamps JETMATIC. Single treatment. Fixed nozzle. Filler 75 valves BERTOLASO ? gravity. Capper 12 teste ? stelvin cap. Corker 12 teste BERTOLASO ? Natural straight cork. Safety protections. Code: QT 295 More details: https://bottlingscout.com

Used Used filling monoblock Enoberg 16.16: Condition: As Is Used Filling monoblock Enoberg 16.16 | 2.000 Bph Year: N/A Speed: 2.000 bph Direction: Clockwise Rinser 16 clamps Filler 16 Valves Product: Dense Liquids Safety protections Code: QT 617 More details: https://bottlingscout.com

Complete PET Filling Line – Krones AG ERGOBLOC – 1.5 L – 32,000 BPH – Non-Carbonated Products – YOM 2006 For sale is a complete PET bottling and packaging line for still water and non-carbonated beverages, built around a Krones ERGOBLOC system. The line has a capacity of up to 32,000 bottles per hour (BPH) for 1.5 liter PET bottles with 28 mm or 32 mm caps. The equipment is suitable for still water and other non-carbonated beverages only. The line includes the full process from preform feeding, blowing, filling and capping to labeling, packing and palletizing, making it a complete turnkey solution for PET bottle production and packaging. General Information Manufacturer: Krones AG System: ERGOBLOC PET filling line Bottle Size: 1.5 L PET Capacity: approx. 32,000 bottles/hour Cap Size: 28 / 32 mm Products: Non-carbonated beverages (still water) Year of Manufactur ...

Complete can filling and closing line for liquids (nutrition) in 250 gram aluminium cans. Product: nutrition liquids. Formats: diameter 65 mm, height: 90 mm, filling weight 250 gram. 24x per box. Capacity: up to 500 / 420 cans per minute (30.000 / 25.000 per hour) for different parts of the line (with automatic palletiser) but the last year reduced to 325 cans per minute (19.500 per hour) because of manual palletising of the carton boxes on a pallet. Dismantling date: March / April 2026., Line exisiting out of:, 1. Preformed can de-palletiser machine, separate layer by layer from the pallet including lid sorting unit., Manufacturer: van Uitert B.V., Year: 1996, Machine number: D05-11399-01, Serial number: 1996.07.005, Installed power: 10 kW - 400 V - 50 Hz, Consumption of air: 3 Nm3/h, Weight: 2.500 kg, Capacity: up to 500 cans/min = 30.000 cans/h, Control panel with Danfoss VLT frequenc ...

Machine 1 Elopak Carton Filling Machine - Manufacturer: Elopak - Machine type: carton filling machine - Control system: Siemens Simatic Panel PC - Configuration: Dual lane (Line 1 and Line 2) - Total carton counter (machine lifetime): over 461 million cartons - Condition: Used, currently installed and in production - Total picker counter (lifetime): 462,280,647 cartons - Total outfeed counter (lifetime): 461,210,559 cartons Machine 2 Meurer MTP 25-B 400 Tray and Wrap-Around Case Packer - Manufacturer: Meurer - Model: MTP 25-B 400 - Year of manufacture: 2011 - Main motor operating hours: 68,742 - Air supply: 6 bar - Speed: up to 25 cycles per minute - Formats: simple trays, wrap-around cases, two-piece lid and base configurations - Included: Meler Micron+ TO hot melt glue unit - Control: touch screen operator panel - CE marked, made in Germany Find more here - / Contact us at -

Used Used filling monoblock Dipran 48.12: Year: 2002 Condition: As Is Used filling monoblock DIPRAN 48.12 | SYSTEM NO SEALS Year: 2002 Speed: 10.000 bph Filler 48 valves Capper 12 heads | Screw cap 31.5X50 Safety protections Code: QT 530 More details: https://bottlingscout.com

Used Used Sicmea filling monoblock: Condition: As Is Model: Cometa 24/6 Speed: 8.000 bph Clockwise For glass bottle 24 mechanical valve volumetric filler 6 head capper for aluminium screw Cap dimension: 35x24mm Distribution system: pick on the fly Safety protection Code: QT 775 More details: https://bottlingscout.com

Used Used Cosmapa gravity filling monoblock for glass bottle: Condition: As Is Model: R10 TSA Speed: 800 bph Clockwise operating direction Suitable container type: glass bottles Gravity filler with 10 mechanical valves Single-head flush cork capper Leveler with inert gas injection Vacuum system before capping Machine layout: Length 280 cm, width 140 cm, height 200 cm Safety protection Code: QT 791 More details: https://bottlingscout.com

Used Used Filling Monoblock Vir Mauri Pavonis 20.4 Sv: Year: 1992 Condition: As Is Used Filling Monoblock Vir Mauri Pavonis 20.4 Sv: Model: Pavonis 20/4 Sv Year: 1992 Speed: 4.000 BPH Direction: Clockwise Type of bottle: Glass Bottles FILLER 20 Filling Valves Manual tank height adjustment Vacuum before filling Type of valve: mechanical CAPPER SCREW CAP 4 heads Type of workable cap: pressure cap Cap size: ? 33 mm; height 46 mm Head height adjustment: manual Can also make aluminum screw cap but no equipment (hopper, descent, capping heads) GENERAL DATA Supported bottle diameter measurements: ? 86 mm; ? 98 mm; ? 106 mm Safety protections Overall dimensions of machinery: length 2150 mm; width 1590 mm; height 2690 mm Code: QT 725 More details: https://bottlingscout.com

Used Used Filling Monoblock MBF 18.18: Year: 2010 Condition: As Is Used Filling Monoblock MBF 18.18: Model: 72018-72018 LVDX Year: 2010 Speed: 4.000 BPH Direction: Counterclockwise Type of bottles: Glass bottles RINSER 18 clamps Fixed nozzle Single treatment FILLER 18 mechanical valves Type of filling: Gravity filling Safety protections Code: QT 752 More details: https://bottlingscout.com

Used Used Filling Monoblock Rozlewniczy 32.32.10: Year: 2007 Condition: As Is Used Filling Monoblock Rozlewniczy 32.32.10: Model: VERA FILL 32-32-10nr VF/12/2007 Year: 2007 Speed: 1.5 l-5500 bph; 0.5 l-10.400 bph Rotation direction: Clockwise Rinser 32 grippers one treatment Type of treatments: CO2 Filler 32 valves Filling type: isobaric Valve type: mechanical Function of the valve: de-gassing One Capper 10 heads Cap type: PCO 28; 1881 Cap size: 28 mm Cap distribution system: pick & place Safety protections Code: QT 739 More details: https://bottlingscout.com

Used Used Filling Monoblock 12.16.1 Gai: Year: 1994 Condition: As Is Used Filling Monoblock 12.16.1 Gai: Model: 3004 EHV 4194D Year: 1994 Speed: 3000 BPH Product: oil For glass bottles Direction: Clockwise Monoblock composed of: Rinser 12 clamps Manual carousel height adjustment Fixed nozzle Vacuum and gas injection before filling Filler 16 valves High Vacuum Single head capper, Screw cap ? Screw cap diameter and height measurements: 31,5X24; 31,4X44; 35X24 Safety protections Code: QT 740 More details: https://bottlingscout.com

Used Used Filling Monoblock Envastronic 20.3: Year: 2002 Condition: As Is Used Filling Monoblock Envastronic 20.3: Model: L2CT3ArolCC Year: 2002 Speed: max 4.200 bph Direction of rotation: clockwise Filler 20 valves ? Tank height adjustment is electric ? Type of filling: gravity ? Valve: automatic, mechanical-pneumatic, operated by level photocells ? Vacuum system before filling One Arol Capper with 3 heads ? height adjustment of the Arol corking turret is electric ? Type of workable caps: natural straight cork ? Vacuum system before capping ? Including cap elevator of 2004 Costral, mechanically operated with a connecting rod and with a capacity of approximately 6,000 corks Safety protections Machine layout Code: QT 741 More details: https://bottlingscout.com

Used Used Filling Monoblock Cimec isobaric: Year: 2016 Condition: As Is Used Filling Monoblock Cimec isobaric: Model: AMERICA DPS 8-1 C Year: 2016 Speed: 1.500 bph Direction of rotation: clockwise Type of bottle: glass bottle Filler ? Number of valves: 8 ? Type of filling: isobaric ? Height adjustment carousel manual ? Valve: mechanical One Capper with one head for crown caps ? Size of caps: 26mm ? Height adjustment of the head manual ? Foaming Safety protections Code: QT 742 More details: https://bottlingscout.com

Used Used Filling monoblock Borelli 1.500 bph: Year: 1997 Condition: As Is Used Filling monoblock Borelli 1.500 bph: Model: CS12 MA Year: 1997 Speed: 1500 BPH Direction: Clockwise FILLER 12 valves Manual tank height adjustment Type of filling: light depression Type of valve: mechanical CAPPER Single head Type of workable cap: aluminum screw Cap size: ? 30 mm x 23 mm (h) GENERAL DATA Supported bottle diameter measurements: ? 73 mm, height 300 mm Overall dimensions of the machine: 1100 mm x 1980 mm Safety protections Code: QT 744 More details: https://bottlingscout.com