tetra pak conveyor used for sale

System: Used trough screw conveyors Coil height: 280 mm Spiral distance: 290 mm Trough height: 325 mm Trough length: 5500 mm Width: 440 mm Overall length: 6700 mm Engine: Greifenberger 5,5 kW Other: Center bearing

Conveyor belt, wire belt with middle drive Length: approx. 5 m Working width: 300 mm

Plastic link belt conveyor with cleated Length: 2300 mm Width: 300 mm

L-conveyor belt Conveyor width: approx. 300 mm horizontal range: approx. 1.4 m long declining range: approx. 4.4 m long

Conveyor belt with plastic modular belt Length: approx. 9000 mm Width: 300 mm

Platelet + roller conveyor approx. 47 000 mm; h max = 1400 mm + 16000 mm pneumatic conveyor; h max = 2500 mm, new 1997

<b>Properties</b> Used belt conveyor of manufacturer Schulz Feet must be ordered separately Incl. motor and Guide material: steel Ideal for fast material handling Expertly disassembled and packed Condition: fully operational 11 STK. in stock <b>Belt conveyors</b> The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and Woodworking machines. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances. <b>Technical data: Mass of the belt conveyor</b> Overall length: 1,710 mm Total width:  ...

Tube-type screw conveyor with 270 mm diameter and 5.200 mm conveying length (measurement taken between center input and center output). 5,5 kW drive via gearbox by Getriebebau Nord and jaw clutch. Shaft speed: 49 RPM; helix ascension: 125 mm.

Tube-type screw conveyor with 270 mm diameter and 2.900 mm conveying length (measurement taken between center input and center output). 5,5 kW drive via gearbox by Getriebebau Nord and jaw clutch. Shaft speed: 49 RPM; helix ascension: 130 mm.

Stainless steel screw conveyor with 250 mm diameter and 2.100 mm conveying length (measurement taken between center inlet and center outlet), inlet and outlet 270 mm Ø each, incl. drive via gearbox and jaw clutch.

Belt-foerderer with 3 belt webs and 5 pneumatic hooks and 1 pneumatic sorting flap; Length 5,600 mm; 1,800 mm; 750 mm; 1.1 kW belt conveyor with 3 belts and 5 pneumatic driven hooks and 1 pneumatics travers; length 5,600 mm; 1,800 mm; 750 mm; 1.1 kW

Foerderband with 5 piece low pressure rollers; Length 1.550 mm; belt width 240 mm; transport height 920 mm; without drive motor belt conveyor incl. 5 pcs. hold down rollers; length 1.550 mm; width 240 mm; transportation level 920 mm; drivemotor is missing

<b>Features:</b> Used roller conveyor from overbeck Very stable design Feet to order separately Drive type: Gravity without motor Condition: fully functional with traces of usage Ideal for fast material transport Professionally dismantled and packaged approx.: 9 meters in stock, 3 meters per segment <b>Technical data:<b> </b> Dimensions of the roller conveyor</b> Total width approx.: 710 mm Total length per segment: 3,000mm <b>Details of the role</b> Clamping length approx.: 640 mm Roll diameter 40 mm Axis distance: approx. 100 mm (adjustable) Material: steel, galvanized <b>Information on the framework</b> Height: 140mm Width: 30mm <b>Roller conveyor</b> The roller conveyor is ideal in the picking zone for interlocking machines or workstations and optimising the interna ...

Chain foerderer with 3 chain straengen; Length 6.100 mm; width 780 mm; Foerderhoehe approx. 1,600 mm; with 3 stubs pneumatic hook chain conveyor with 3 chains; length 6,100 mm; width 780 mm; transportation level 1,600 mm; incl. 3 pcs. pneumatic hooks

Artec mini table lathe C2x300 tips size 300 mm + 8 PCs chisel set Mini table lathe C 2 and 8 PCs. HSS cutters set now in the Westfalia savings Kit. C-2 the spindle speed variable from 200-2500 RPM via a potentiometer is adjustable at the mini lathe. About a 80 mm three-jaw chucks can be clamped workpieces easily. The workpieces can be supported with a tailstock with MK 2-recording. By a quad-steel holder the cutters can be secured, designed for 8 mm cutters. Also thread can be cut with this mini lathe 1.5 mm pitch. All materials with normal strength can be edited. (Aluminium brass steel). Technical data: centre height 90 mm centre distance 300 mm spindle bore 19 mm tailstock intake MK-2 thread cutting range 0.2 1.5 mm speed range 200-2500 U / min variable power 250 Watt/230 V Plan route 65 mm Oberweg sled 55 mm Quill trail 50 mm Dimensions Lxwxh approx. 700  ...

Belt-foerderer with 4 belt webs and swivel displacement; Length 750 mm; 1,750 mm; 950 mm; 3,400 mm incl. 4 pneumatic hooks; Drive 1.1 kW belt conveyor with 4 sections and pneumatic movible traverse; length 750 mm; 1,750 mm; 950 mm; 3,400 mm incl. 4 pcs. pneumatic hooks; 1.1 kW

Cooling principle: water cooling (for drying pasty solids), capacity: 4,0 cbm/h, trough length: between 6,7 and 7.9 m, screw diameter: 400 mm, cooling jacket diameter: 560 mm, double-walled, wall thickness trough: 5 mm, helical geared motor 4 kW, conveyor trough coat, cooling shroud, front plates, Auger and Auger blades made of V2A steel

<b>Features:</b> Used roller conveyor Very stable design Feet to order separately Drive type: Gravity without motor Condition: fully functional with traces of usage Ideal for fast material transport Professionally dismantled and packaged <b>Technical data:<b> </b> Dimensions of the roller conveyor</b> Total width approx.: 990 mm Total length: 1,500mm <b>Details of the role</b> Roll diameter 50 mm Axis distance: approx. 100 mm Material: steel, galvanized Role manufacturer: Interroll <b>Information on the framework</b> Height: 50mm Width: 30mm <b>Roller conveyor</b> The roller conveyor is ideal in the picking zone for interlocking machines or workstations and optimising the internal process. During transport, the roller conveyor can convey sensitive and differently sized c ...

<b>Features:</b> Used telescopic belt conveyor Condition: fully functional with traces of usage Ideal for fast material transport Professionally dismantled and packaged Color: Blue 2 pcs in stock Price per piece <b>Technical data:<b> Manufacturer: Budde Built: 09/11 Model: TGF03 Total length: 14,530 mm Funding length: 14,000mm Length retracted: 5,000mm Length Extended: 14,000mm Total width: 1.240mm (incl. control cabinet) Width: 990mm Belt width: 600mm Condition: good (used) Belt type: Smooth Height: 750mm Weight: 2.200mm Incl. counterweights at the back. <b>Telescopic belt conveyor</b> The telescopic belt conveyor is ideally suited in the picking zone to interlock machines or workstations and to optimize the internal operation. During transport, the telescopic belt conveyor can convey sensitive and differentl ...

A large number of conveyor belts, which are hardly used. The new price was approx. EUR 350 per meter! Manufacturer: Transnorm Length: 3 m 23 m Width: 500 / 600 / 800 mm Material: Aluminium price: 120 EUR per meter

Infeed with electric box 5 bands (a curve band)

New BIG BAG replenishment station with spiral conveyor the devices in stock available for immediate delivery. Spiral conveyor discharge height 2800 mm for 1 qbm big bags. At smaller big bag can be inter's pallets. NET price plus VAT

A large number of conveyor belts (approx. 200m) is available. Manufacturers include: Transver, Transnorm Prices are cheap, it depends on what they need...

Ex Works Oradea We speak English. Wir sprechen Deutsch. (+40 740-221.698 ) Hablamos Espanol. Beszelunk magyarul. (+40 743-177.040 ) Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

Conveyor belt system consisting of: 1 PCs. Bunker task band Above ground A A = 3500 mm Conveyor width = 1100mm Power 1, 5kW 1 PCs. Trail band A A = 4700 mm Conveyor width = 1100mm Discharge height 2800 mm incl. driver 40mm high Power 1 .1kw primed and painted More info and price on request

with membrane conveying

CONVEYOR BELT / CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! For many applications in industry, agriculture and for woodchips. On request we manufacture the conveyors / conveyor belts to your individual measurements. (All lengths, widths and designs possible) Available also with pimples, studs or textured surfaces. We ship worldwide we deliver worldwide, please ask for shipping costs!

Foerder belt with drive and substructure. Length 4.150 mm, wide belt 500 mm, Foerderhoehe 600 mm, drive 0.75 kW belt conveyor with steel construction and motor, length 4.150 mm, width of belt 500 mm, hight 600 mm, motor 0.75 kw

Chain foerderer with steel holder, length 7,700 mm, width 500 mm, steel base on foerderhoehe 840 mm, drive motor 1.1 kW cahin conveyoer with steel dogs, length 7.700 mm, width 500 mm, hight of transport hight 840 mm, 1.1 kW motor

Chain foerderer with 2 x 1/2inch chain straengen. A-A- 5,500 mm, width 1,140 mm (chain to chain), 0.75 kW, lined with formwork panels Chain conveyor with 2 x 1/2inch chaindimension, length 5,500 mm, width from chain to chain 1,140 mm, 0.75 kW motor

Sorting conveyor with 13 electric off boxers for round wood to wood length 5, 5 m. Complete with drive unit and deflection. Hydraulic chain tensioning. 13 log kickers sorting conveyor with electrical for log length up to 5, 5 m. Including eletric hydraulic chain tensioner, driving station.

Grenzebach HGB new device, 1a State ca 300 BH Uea dimensions: 590h x 170 x 190 d cm Weight ca. 1.8 t 78 cm with toothed belt conveyor Rail length 500 cm from the ground 26 cm

Round timber Sorting conveyors make JUMPER. 43 sort fields right and left 3-5 m length of wood. Drive unit with 2 x 75 kW. From Boxer electrically with each 3.0 kW. 2 x kW frequency converter FIG. 90 each. Steel base with 2,600 mm. sorting chain conveyor height 1 year old! Plant until April 2017 in use to visit! Built in 1997.

Various conveyor belts of various lengths from 3m to 25m; Width 800mm and 1400mm; Drive power from 1.5 kW to 5.5 kW. Very well maintained, has been little used. Extremely stable built. Visits by appointment at any time.

Roller conveyor for frame saw to cross off promotion L x W x H: 150 x 230 x 100 cm Weight approx. 6000 kg Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Cross conveyor for removal of boards L x W x H: 5 x 4 x 1 m Weight 3000 kg Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Package press and strapping system make FROMM with 19 mm Plastic tape, with timber insertion, package roller before the press, bar patrons and cross conveyors, package delivery sponsor behind the press. (Driving with and without timber is possible!) Complete control with Control Panel, hydraulic power pack. Very good condition, used little! Year of manufacture 2004

Pneumatic conveyor vessel with 2.000 l. gross capacity, pneumatically operated inlet cone (incl. one spare cone), pinching valves for vent and outlet. Without pipework.

Electrically heated furnaces with conveyor belt (for non-explosive substances) TECHNICAL DATA temperature max.: 420°C working temperature: approx. 350°C total power consumption: 60 kVA heating power: 48 kW drive: 0,55 kW air circulators: 2 x 4 kW number of control groups: 2 external dimensions (approx.): length: 8500 mm width: 1800 mm height: 2625 mm useable dimensions: conveyor belt width: 900 mm clear height: 150 mm heated length: approx. 7200 mm

Condition needed Element Length Element Width Surface Drive Missing Parts Head conveyor 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no bearing, drive shaft 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no no 2500 1060 painted no bearing, drive shaft, 2 x rollers Congestion conveyors 2500 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2060 1060 lacquered n.a. no 2000 1060 lacquered n.a. 1 x roller 2060 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2500 1060 lacquered n.a. no 2500 1060 lacquer ...

Driven conveyor belt – carpet conveyor Gebhardt LxWxH: approx. 2.800x930x830mm Carpet width: approx. 800mm Height adjustable, on castors Angetr. Roller coaster with centering unit Kraus LxWxH roller passage incl. centering unit: approx. 1.910x1.1.420x1.480mm Wide roller coaster: approx. 670mm Roller gear: approx. 600mm Working height: approx. 880mm (height adjustable) 4 pcs. roller coaster straight, 1 pc curve element 90° not driven – Kraus Straight Elements (LxW): 2.000x670mm Roller gear: 600mm Roller distance approx. 25mm height adjustable 2 pcs. Angetr. Carpet conveyor, Kraus Width: 600mm Carpet width: 500mm Lengths: 11,000 and 12,000mm On castors Visit on site at the customer's site is possible by telephone agreement.

Properties < b >: < / b > Used belt conveyor Color: grey SEW geared motor available Feet to be ordered separately Material: Steel Ideal for the fast material handling Expertly disassembled and packed Condition: fully operational Technical data < b >: Mass of the belt conveyor < /b > Overall length: 1,040 mm Overall width: 700 mm the belt < /b > details < b > Belt width: 600 mm Belt type: smooth the framework < /b > details < b > Frame height: 160mm the motor < /b > details < b > SEW-EURODRIVE Type: R27 DT90S4/BMG/HR kW: 11 Belt conveyor < b > < /b > The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. During transport, the belt conveyor can promote sensitive and different-sized containers, boxes or other packaging and a ...

Conveyor,galvanized,Soco W 420 x L 1500 mm.

material width: 300 mm coil weight: 3 t material thickness: 2 - 4 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer a powered shears roller conveyor for sale. The length is variable: 3275 mm 8735mm max. Roll width 610 mm. Suitable for distribution centers and depots for the loading and unloading of trucks, containers and wagons. Stepless height adjustment. A very simple drive into various types of vehicles for its fast and safe loading and unloading. After use, can be easily folded away to save the space in the warehouse. Technical data: Length retracted: 3275 mm Length extended: 8735 mm Width: 610mm Adjustable height: from 730 to 1040mm Rows of rollers: 67 units Three-phase motor 120W Speed: from 5-35M / min. Control Panel x 1 piece Panel x 1 piece maximum load: 80kg / M Number available: 4 PCs. Net price 6920 / piece Delivery possible. Please specify your postal code and directly ask. Offer is valid until stocks last.

FEEDER BELT - CONVEYOR BELT GFB 600 FOR INJECTOR GÜNTHER PI 104/236 Band width: 600 mm used,overhauled Request a quote on iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-BiaÅ?a USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Properties Used belt conveyor of manufacturer TRANS standard Color: Silver Incl. SEW motor and Guide material: steel Ideal for fast material handling Expertly disassembled and packed Condition: fully operational Material: Aluminium 1 STK. in stock Belt conveyors The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and Woodworking machines. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances. Technical data: Mass of the belt conveyor Overall length: 7.100mm (1 x 800mm, 1x3900mm & 1x2400mm) Overall width incl. ...

Pneumatic conveying system for various types of powder, consisting of: feed hopper with lid and compressed air turbine vibrator (netter NCT 10), injector (Telschig 2' FOX 300-SCE-SS) and side channel compressor (Electric Sd 820, 7.5 kW, 9.0 m3/h, 420 mbar) with pressure limiting valve. Flow capacity: 375 kg/h, required conveying air: approx. 180 Nm3/h at 330 mbar.

Properties Used belt conveyor of manufacturer TRANS standard Color: Silver Incl. SEW motor and guide ideal for fast material handling Expertly disassembled and packed Condition: fully operational Material: Aluminium 1 STK. in stock Year of manufacture: 2007 Belt conveyors The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and Woodworking machines. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances. Technical data: Mass of the belt conveyor Overall length: 7.180 mm overall width incl. motor: 700 mm Info ...

Pneumatic conveying installation for different kinds of powders, consisting of: Feeding hopper with cover and turbine vibrator (Netter NCT 10), injector (Telschig 2'' FOX 300-SCE-SS) and side channel blower (Elektror Sd 820, 7,5 kW, 9,0 m³/h, 420 mbar) with pressure limiting valve. Conveying capacity: 375 kg/h, required air flow: Ca. 180 Nm³/h at 330 mbar.