tetra pak a3 used for sale

Item number 90045-0337 Engine control card, engine control

The Tetra Pak Tetra Straw Applicator (TSA 46) has a compact design and is very reliable. Trouble-free operation in a carton filling lines is guaranteed even with long periods of use. It is installed between the filling machine and the packaging machine and has servo motors and inverters. The regulated and controlled application of the straw is thus made possible without any problems. The constant and trouble-free speed of up to 8.000 units/h is ideal for use in conjunction with the Tetra Pak TBA 19 filling machines. Previously used for 200 ml Slim cartons with U-Straw 4. Production hours: 92.204 hours. Including Nordson ProBlue 4 hotmelt unit. MM + SPC + EM Manuals available., Type of Machine: Straw applicator, Capacity: 8.000 pieces per hour, Type of carton: 200 ml Slim, Development step: 10V, Drawing spec.: 678547-0101, Production hours: 92.204 hours, Dimensions: ± 230 x 100 x 210 cm, ...

The Tetra Pak Tetra Cardboard Packer 70 (TCP 70) is an automatic secondary packaging machine designed for grouping and packing filled Tetra Pak carton packages into wrap-around cardboard or corrugated board cases. It is widely used in dairy and beverage packaging lines operating in ambient conditions. It is flexible and has a number of possibilities when it comes to package sizes, packing patterns and cardboard units. This machine is previously used for 1 Liter Slim / Base cartons, 4x2, in a tray (not wraparound). Output: up to 7.000 cartons/hour (depending on format and configuration). Feeding side: Left hand. Infeed type: Multi. Infeed: U-form. Conveyor speed in: 35 m/min. Conveyor width: B79/B65. Hotmelt unit (Robatech KPC12, serialnr 134590, year 2005)., Type of Machine: Cardboard Packer, Capacity: up to 7.000 cartons per hour, Type of carton: 1.000 ml Slim / Base, Development step:  ...

Tetra Pak Tetra Cap Applicator 88 / TCAP-88, previously used for Tetra Aseptic 1.000 ml Square with a SpinCap screwcap. This cap applicator was running in combination with a Tetra Pak TBA 8 carton filler. The applicator has a small footprint. Number of productions hours: 69.825 h. Resealable and tamper-evident opening device. The SpinCap permits the packages to be stored horizontally on a refrigerator shelf, even after opening. The closure is about 10 to 20% more costly than the flip-style fitment. Control panel with GE Fanuc Series 90-30 PLC and separate operation panel with Tetra Pak panel. Nordson PROblue 4 hotmelt unit. The production capacity goes up to 6.000 cartons per hour. Including collecting vat and elevator (Tecno Vibrazion, code nr 11680-2, year 1998) with mechanical feeder (Tecno Vibrazion, code nr 6000/10, year 2001) and all available manuals., Type of Machine: Cap applica ...

Used Cap Applicator – Overview This used cap applicator, manufactured by Tetrapak, is designed for high-speed application of plastic screw caps onto carton packages in industrial packaging and beverage production environments. The Cap 30 Speed model supports efficient cap application at up to 12,000 caps per hour, making it a reliable choice for a second hand or used bottling line where consistent throughput and precise cap placement are critical. It is well suited for integration into modern packaging machinery setups and can operate as part of a larger used bottling line for beverage production. Engineered for accuracy and repeatability, the machine is compatible with Helicap 23 closures, commonly used in carton packaging applications. Its robust construction and proven Tetrapak engineering ensure stable performance for producers seeking to optimize industrial packaging efficiency wi ...

Spare part for Tetra Pak TBA/3 filling machine: From the TBA/3 Jaw System, pre-assembled, complete: yoke left hand and yoke right hand with left hand arm, right hand arm Condition: unused/new Intermediate sale reserved

From the TBA/3 Jaw System: pre-assembled complete yoke left hand and yoke right hand with left hand arm, right hand arm etc. Condition: Unused/new Subject to being unsold

Built: 2003 Location: Germany Brand: TetraTop Model: TetraTop 170V Availability: instantly Technical details: Volume (ml): 1,000 ml, 750 ml, 500 ml Tray Type: TetraTop Flat Top Capacity: 9,000 cartons / h Filling machine TetraTop 170V, commissioning 2004, purchase contract 2003. The rated power of the machine is 9,000 EH /h. Formats: 1,000ml cartons, 750ml cartons and 500ml cartons mileage as of 31.08.2011: 13,772 operating hours. • 1x GSU for granulate transport • 1x granulate hopper • 1x HCCU for foam cleaning • 1x Volume adjustment type 190V converted to stainless steel cylinder • 1x 20 replacement cartridges • 2x tetraPak type Capper 20 screw-on machines for screwing on 38mm screw caps • 1x manual roller transporter for inserting the rollers into the ASU • 1x roller truck for roller transport • 1x retrofit air conditioner Rittal for  ...

for 200, 250 and 330 ml

Item number 1334989-0101 Level Sonde for TBA 21 aseptic filling machine

Tetra Pak TCAP/21 1000 ml sl ReCap 3 Applicator We offer: Tetra Pak TCAP/21 ReCap 3 Applicator for 1000 ml slim line Tetra Pak beverage cartons, manufacturing year 2004 - in excellent condition - excellent serviced Available from stock Prior sales reserved

1000 ml, 750 ml, 500 ml, 250 ml,

TETRA PAK WRAP AROUND CARD BOARD PACKER, MODEL TCBP 70, MANUF. IN 2007, EXCELLENT CONDITION, VERSION 110, Z-FORM. 15000 RUNNING HOURS

Juice Preparation Plant – Tetra Pak Processing System Complete juice preparation and pasteurization plant designed for the production of fruit juices and beverage bases. The system includes Tetra Almix Spark, Tetra Alblend Spark, and Tetra Steridrink pasteurization equipment, providing reliable mixing, blending, and thermal treatment for industrial beverage production. A) Tetra Almix Spark 020V - High-performance mixing and dissolving system used for preparing beverage bases and ingredients before blending or pasteurization. General Information - Manufacturer: Tetra Pak - Model: Tetra Almix Spark 020V - Year of Manufacture: 2001 Capacity - Production Capacity: 0 – 15,000 l/h Installed Options - Vacuum cleaner - Drum emptying station - Utility Requirements - Sealing Water - Connection: 1/2" - Capacity: 700 l/h - Temperature: 15°C - Pressure: 0.3 bar ...

Microfiltration System – Bacteria Removal (Dairy Applications) General Information: - Manufacturer: Tetra Pak - Model: Tetra Alcross M - Year: 2005 - Automation: Fully automatic - Application: Bacteria extraction / microfiltration for dairy products System Overview: The Tetra Alcross M is an industrial-grade microfiltration system designed for efficient bacterial and spore reduction in dairy processing, particularly in skim milk applications. Engineered for continuous production, the system utilizes high-performance ceramic double-layer membranes, enabling reliable separation performance and consistent product quality. This technology is widely used in ESL milk production and other high-hygiene dairy processes, where stable filtration performance and sanitary design are critical. The robust construction and proven reliability of the Tetra Alcross platform make it su ...

Film Wrapper Machine – TFW67 General Information: - Manufacturer: Tetra Pak - Model: TFW67 - Year of Manufacturing: 2004 - Condition: Used - Machine Type: Film Wrapper / Secondary Packaging Machine System Overview: The Tetra Pak TFW67 Film Wrapper is a high-performance secondary packaging machine designed for automatic film wrapping of carton packs in demanding industrial environments. Built for continuous operation, the TFW67 ensures reliable pack collation, precise film application, and consistent sealing quality, making it a proven solution in dairy and beverage production lines. This model is widely recognized for its robust construction, stable high-speed performance, and seamless integration into existing Tetra Pak packaging systems. Technical Specifications: - Packaging Formats - 4 × 1 - 4 × 2 Output Capacity: - Up to 9,000 packs per hour Ope ...

Tetra Pak TCAP/21 1000 ml sl ReCap 3 Applicator We offer: Tetra Pak Cap Applicator 21, TCAP/21 ReCap 3 Applicator for 1000 ml slim line Tetra Pak beverage cartons, manufacturing year 2004 - in excellent condition - excellent serviced Available from stock Prior sales reserved

Complete Conversion Kit of TBA-19 330 ml prisam filling machine. All parts in original condition 10/10 and 100 % Tetra pak parts.

We offer: New Tetra Pak ® spare parts for TBA 8, PT 8, TBA 21, PT 21, TCBP 70, TCAP 21, 75 ... -> In the list that we send to you on request. you will usually find new spare parts for Tetra Pak ® machines such as TBA 8 PT 8 TBA 21 PT 21 TBA 19 (mainly volume flaps for TPA330SQ) TCBP 70 TCAP 47 (little) TCAP 21 (little) TCAP 75 (little) ... Intermediate sale reserved Prices on request

Tetra Pak Separator H845 – Factory New High-Capacity Milk Separator The Tetra Pak Separator H845 is a high-performance industrial separator designed for hot milk processing in dairy production facilities. Built with Tetra Pak AirTight technology, this separator ensures gentle product handling, minimal oxygen intake, and reduced product losses, making it ideal for modern dairy processing plants. This factory-new unit, designed in 2024, has never been installed or used in production, offering manufacturers the opportunity to acquire premium Tetra Pak technology in unused condition. General Information - Manufacturer: Tetra Pak - Model: Separator H845 - Condition: Factory new - Year of Design: 2024 - Installation Status: Never installed / never used in production Technical Specifications - Application: Hot milk separator - Processing Capacity: up to 40,000 l/h - Air Pr ...

New Tetra Pak ® spare parts, -> We send you our list on request

Recommended as a line with PT 8, closure applicator TCAP ReCap 2 and packer TCBP 62. The 1000 Base format is Tetra Pak's classic one-litre brick format. This TBA 8 offered here is from the V100 development stage. Like all of our Tetra Pak machines, this line is first subjected to a thorough incoming check. After the following cleaning and the extensive examination of the condition, we overhaul the machine with the necessary care. This machine is equipped with a TP MC control system and produces 6000 packs per hour. As with most Tetra Pak machines, we are happy to offer you these with the associated machines for an entire filling line. Regardless of this, we will be happy to advise you in advance and make you an individual offer. Please contact us or schedule a visit to our workshop to see the extensive work for yourself. From our extensive range of machines that we have in stock, we are  ...

TBA 19 machines have been developed for the filling of compact formats. The 250 milliliter Slim format is one of the most requested volumes. In this format, the system is used for many types of products. Before and during the repair work, we constantly check the condition of all existing parts and, if necessary, replace them before reassembling the machine. After extensive work in our workshop, we test all machine components intensively. Our aim here is the smooth interaction of all machine groups up to the finished product. These tests at the end of the technical work are particularly important for the later use of the machine. We can find existing errors in the system and fix them before the next production use. TBA 19 machines are available in different development stages. We will be happy to explain the extensive steps to make the system operational again for you. On request, we ca ...

Stock# U2310 Used stainless steel two-stage piston homogenizer manufactured by Tetra Pak (Sweden) model Tetra Alex 20. Capacity up to 5000 l/h at 160 bar pressure. Number of pistons: 3. Piston diameter: 50 mm. Piston material: stainless steel. Main drive: ABB electric motor 30 kW, 400 V, 50 Hz, 1475 rpm, IP55. Hydraulic drive: 0.25 kW, 400 V, 50 Hz, 1410 rpm, IP55. Cooling water requirements: 130 l/h. Stainless steel covers included. Weight: 1355 kg.

TBA 19 machines have been developed for the filling of compact formats. The 250 milliliter base format is one of the most requested volumes. In this format, the system is used for many types of products. Before and during the repair work, we constantly check the condition of all existing parts and, if necessary, replace them before reassembling the machine. After extensive work in our workshop, we test all machine components intensively. Our aim here is the smooth interaction of all machine groups up to the finished product. These tests at the end of the technical work are particularly important for the later use of the machine. We can find existing errors in the system and fix them before the next production use. TBA 19 machines are available in different development stages. We will be happy to explain the extensive steps to make the system operational again for you. On request, we can  ...

Designed as a machine for smaller formats, the 19 200 Base is capable of producing 7500 packs per hour. It is suitable for filling different products. Preferably, aseptic products are filled in the machine, which are previously fed into the filling line via a UHT or a pastorizer for preservation. Subsequently, it is possible to equip the filling machine with different downstream equipment. You are welcome to contact us to find the right selection for your requirements. We are also happy to support you in the planning and implementation of the necessary conveyor belt systems to connect the individual machines as a line. All machines undergo extensive technical work before they are put back into operation, which we always carry out in our workshop. In the end, there are always tests to be fully verified. These tests guarantee the perfect condition of the machine for the customer. On reques ...

Motor control card Bendingroller for TBA / 8 ASU

Output card TPMC PLC for Tetra Pak TBA 8 aseptic filling machine Output module TP OM16

Designed as a machine for smaller formats, the 19 200 Base is capable of producing 7500 packs per hour. It is suitable for filling different products. Preferably, aseptic products are filled in the machine, which are previously fed into the filling line via a UHT or a pastorizer for preservation. Subsequently, it is possible to equip the filling machine with different downstream equipment. You are welcome to contact us to find the right selection for your requirements. We are also happy to support you in the planning and implementation of the necessary conveyor belt systems to connect the individual machines as a line. All machines undergo extensive technical work before they are put back into operation, which we always carry out in our workshop. In the end, there are always tests to be fully verified. These tests guarantee the perfect condition of the machine for the customer. On reques ...

TEMPERATURE CONTROL for 90V TBA/8 aseptic filling machine 90410-0051

Decorative holding card TMCC

Item number 558321-0101 IH switching card for TBA 8 aseptic filling machine

SKU: 90025-0055 Power supply TPMC PLC for aseptic filling machine TBA 8

Item number 90025-0017 Input card TPMC PLC for TBA 8 aseptic filling machine

Item number: 90458-0601 Photocell for TBA 21 jaw system aseptic filling machine

Item nr.: 907572-0000 Counter Omron for Tetra Pak machines Omron high speed counter unit, C200H-CT001-V!

Article number: 1260522-0000 Photocell PT 21 for Tetra Pak Pull Tab Applicator 21

Item nr.: 1520450-0000 Inductor PT 21 for Tetra Pak Pull Tab Applicator

Item nr.: 90045-0394 Servo Card DMC-50720 E for PT 8 Tetra Pak Pull Tab Applicator

article nr.: 90045-0395 Digital Motor Controller (DMC) Servo Amplifier DMC 50720P AC E-372 for Tetra Pak PT 8 Pull Tab Applicator 8

SKU: 90458-0602 Photocell for PT 21 Pull Tab applicator and ASU of the A3 flex aseptic filling machine

article nr.: 1282939-0000 Roller for PT 8 Tetra Pak Pull Tab Applicator

article nr.: 67379-0202 or 67379-202 Transformer, Trafo, Transformer TBA 21 Tetra Pak aseptic filling machine

SKU: 90410-0051 Temperature controller KS 40 for e.g. TBA 8 Tetra Pak aseptic filling machine

article nr. : 67347-0101 Control card brake of PT 8 Tetra Pak Pull Tab applicator

Item number 90023-0048 Insert Card 177, Input Card Allen Bradley for Tetra Pak e.g. TBA 8 development step 50V and before

Item number 90023-0051 Output module green l771-OC Allen Bradley for Tetra Pak TBA 8 or TBA 9 aseptic filling machine technology version 50 V and in front

Item number 67379-0101 Transformer cross seam welding for Tetra Pak TBA 8 aseptic filling machine

Item number 90023-0081 1711-DKC (24 V) Gray Encoder Module Allen Bradley for Tetra Pak TBA 8, TBA 9 aseptic filling machine technology version 50 V or before

Item number 90031-0068 Power Supply for Tetra Pak machines e.g. TBA 8, TBA 19, A 3 flex, TCBP 70 GE FANUC Series 90-30 High Capacity Power Supply Programable