tetra pak a used for sale

sunroof, glass roof, car glass roof, tilting roof, pop-up sliding roof -Manufacturer: Monza, sunroof type Air Light 1 Ovp -Size: 780 x 410 mm -Dimensions box: 780/410/H55 mm -Weight: 5.3 kg

Standard cooler, car cooler, oil cooler, heat exchanger, compressor cooler, hydraulic oil cooler -Manufacturer: AKG, light metal oil/air cooler with filter -Type: 5.1074.4 1109.069.0000 -Pressure: max. 15 bar -Dimensions: 1090/420/H715 mm -Weight: 61 kg

Cup hinge drilling machine -Stops: pneumatically controlled with program selection -Drilling pattern: see the pictures -Dimensions: 4000/1100/H1800 mm

electric motor, three-phase motor -Manufacturer: ATB Bauknecht, electric motor 100L Ex-protected -Type: EAY 100L/4C-12 -Power: 2.5 KW -Speed: 1420 rpm -Shaft: Ø 28 x 60 mm -Design: B3 -Protection class: IP54 -Dimensions: 365/250/H205 mm -Weight: 25 kg

Offer 23291 Specifications: End processing machine for pipes with six-fold turret - tool holder Tube diameter 6 - 40 mm Max. forming length 100 mm Drive 400 V / 7.5 kW Space requirement approx. W 1200 x D 2100 x H 1500 mm Weight approx. 1400 kg

Briquetting press 1000 kg/h approx. 55 kW Diameter 75 mm

electric motor, three-phase motor -Electric motor: type T 71A 2 AB3 -Power: 0.37 kW -Speed: 2820 rpm -Shaft: Ø 14 x 30 mm -Protection class: IP 54 -Dimensions: 245/140/H170 mm -Weight: 5.8 kg

electric motor, three-phase motor -Electric motor: type T 71B 2 AB3 -Power: 0.55 kW -Speed: 2790 rpm -Shaft: Ø 14 x 30 mm -Protection class: IP 54 -Dimensions: 245/140/H170 mm -Weight: 5.8 kg

electric motor, three-phase motor -Electric motor: type T 71A 4 AAB3 -Power: 0.25 kW -Speed: 2790 rpm -Shaft: Ø 14 x 30 mm -Design: B3 -Protection class: IP 54 -Dimensions: 245/140/H170 mm -Weight: 5.3 kg

three-phase motor, electric motor -Manufacturer: ADDA, electric motor type C160L-8/6 -Power: 3.5 kW -Speed: 720 rpm -Shaft: Ø 42 x 110 mm -Design: B3 -Protection class: IP 55 -Number: 3x Motor available -Price: per piece -Dimensions: 635/320/H410 mm -Weight: 87 kg/piece

Manz Automation aico.panel 80036808 Touch-Panel 19" aico.box.IPC V2 81009594 Set Item Condition: New as pictured Possible traces of storage, installed but not put into operation. Type: aico.panel Art-No.: 80036808 24VDC/2A Type: aico.box.IPC V2 Art-No.:81009594 REV: 2.1; 100-240 VAC / 4-2A; 50/60Hz Incl. accessories 30kg More items - new and used - can be found in our shop! International shipping costs on request!

Qty. 1 Second-hand homogenising chamber furnace Mfc.: Schmitz + Apelt LOI Type: Chamber furnace – GDKV 195/267/770/1280 Built: 1996 Stopped: 2019 Heat treatment of Al profiles! Operation temp.: 160 – 270 °C Max. temp.: 300 °C Natural Gas heated Scope of supply: Frame of the furnace Heating facility Air circulation facility Entry & Exit furnace doors Separator slide Measurement & Control device

Cooling water pump, radiator, water pump, engine cooling -Manufacturer: SKF, water pump -Type: AquaMax VKPC 81602 -Dimensions: see photos -Carton dimensions: 190/125/H120 mm -Weight: 1.3 kg

Rear silencer, exhaust system, muffler, silencer, charger carburetor, radiator, coolant cooler -Manufacturer: AVA, water cooler for BMW 3 Series unused OVP -Type: BW2081 -Dimensions: see photos -Carton dimensions: 660/140/H430 mm -Weight: 4.6 kg

Condenser Centauro Type: ACI/R 263/96.9Y Cooling capacity: 48,3 Kw Air flow: 11400 m3/h Number of fans: 2x630 mm RPM: 660/520 Dimensions: 2880x630x1230 mm Entry/exit diameter: 42/35 mm Quantity in stock:1 Stock number: SK104 Condition: Used

GE Äkta Explorer FPLC 100 Air/General Electric/Cytiva -Box 900 -pH/C 900 monitor -UV 900 UV Detector -UV Flow Cell -P 900 Pump /100ml/min w. Switch Valves Air 900 Control Box -pH Sample -Conductivity Cell -INV 907 Injection V1 Sample Valve V5 Outlet Valve V4 Column Valve V2 Column Valve V 3 -P 960 -M 925 MIxer (2ml) on request 5 and 12 ml) FR 902 Restrictor CU-950 Interface Unicorn Software -Frac 950 Faction Collector warranty

three-phase motor, electric motor -Manufacturer: ADDA, electric motor type 100LB-4 -Power: 3 kW -Speed: 1400 rpm -Shaft: Ø 28 x 60 mm -Design: B3/B14 -Protection class: IP 55 -Dimensions: 360/200/H250 mm -Weight: 22.6 kg

Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: Nebelmeyer, milling chuck SK40 -Type: Mü 45 SN 8 004 - M 16 -Mounting: Ø 33 mm -Versions: see photos -Dimensions: Ø 65 x 150 mm -Total weight: 1.4 kg

Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder -Milling holder: SK40 2 pieces -Mounting: Ø 32 mm -Versions: see photos -Price/Delivery: complete -Dimensions: Ø 63 x 150 mm -Weight: 1.0 kg/piece

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: ABW, live center -Type: ZNB 204 -Recording: MK4 -Dimensions: Ø 100 x 215 mm -Weight: 3.5 kg

x-travel: 620 mm y-travel: 520 mm z-travel: 460 mm CNC-control: iTNC 640 HEIDENHAIN Table dimensions: Ø 650 mm max. table load: 300 kg spindle taper: SK 40 spindle turning speed range: 12.000 U/min feed range: 1 - 20.000 mm/min rapid traverse: 36 m/min coolant: IKZ 30 bar voltage: 400 V total power requirement: 25 kVA weight of the machine ca.: 9,2 t dimensions of the machine ca.: 2,35 x 4,15 x 2,95 m chip conveyor: 2,60 x 1,65 x 1,20 m Oil cooler: 0,50 x 0,70 x 1,45 m water cooling unit: 0,70 x 0,70 x 0,80 m - Serial-No.: 6LUD00185 - Control ON: 10.918 h - Spindle ON: 2.725 h - Control: HEIDENHAIN iTNC 640 - 3-D touch probe HEIDENHAIN TS 740 - Travel distance B-Axis 50º/+110º,C-Axis 360º - Internal coolant supply through spindle 30 bar - Electr. handwheel - Laser tool measurement - chip conveyor - suction The data for this ad was created with ModulMWS - the software solution of L ...

fixed center, fixed punch center, fixed Morse taper, fixed center point, center points -Manufacturer: ABW, fixed centering tip 2 pieces -Mounting: Morse taper MK6 -Price/Delivery: complete -Dimensions: approx. Ø 64/270 mm -Weight: 5.4 kg/piece

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK6/5 -Recording: MK6 -Holder tool: MK5 -Dimensions: Ø 63/220 mm -Weight: 3.4 kg

tool holder, milling holder, milling tool, long milling arbor, arbor holder, cutter head holder, cutter head holder -Milling holder: cutter head holder SK50 -Mounting: Ø 22 mm / M10 -Dimensions: see photos -Dimensions: Ø 98 x 554 mm -Weight: 19.3 kg

Professional horizontal packing machine from a reputed manufacturer. Suitable, for example, for packaging food, sweets, medical devices, technical articles, printing and paper products, household and toys, and textiles. Package width: 35 – 100 mm Ilbuifcbkb Package length: 65 – 160 mm Package height: 5 – 35 mm Capacity: 35 – 200 packs per minute Film width: 80 – 220 mm Machine weight: 450 kg Machine dimensions: Length 4.0 x Width 0.9 x Height 1.6 m 220V / 50 -60 Hz / 2.7 KW

Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: ABW, thread cutting chuck holder MK4 -Type: GBLK4 -Bore: Ø 14 mm -Number: 3x cutting chuck available -Price: per piece -Dimensions: Ø 32 x 170 mm -Weight: 1.9 kg/piece

pressure: 63 t throat: 320 mm stroke: 8-100 mm no. of strokes: 120 Hub/min ram - range of adjustment: 63 mm table surface area: 730x600 mm ram surface: 540x360 mm table height: 850 mm tool hole in ram: Ø40 mm weight of the machine ca.: 5,5 t dimensions of the machine ca.: BxTxH 2000x2000x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK5/3 -Dimensions: Ø 44/80 mm -Weight: 0.6 kg

Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier -Tool carriage: support carriage support carrier -Tool holder: Ø 32 mm -Dimensions: see photos -Dimensions: 460/190/H205 mm -Weight: 21.6 kg

Four jaw chuck, four jaw lathe chuck, 4 jaw chuck -Manufacturer: AROWA, four-jaw chuck No. 4 chuck size Ø 138 mm -Passage: Ø 37 mm -Bolt circle: Ø 120 mm -Dimensions: Ø197 x 110 mm -Weight: 11 kg

Electric motor, three-phase motor -Manufacturer: ABM Greiffenberger, electric motor type 3 DF 1/132 Sb-2 -Power: 9.2 kW -Speed: 2840 rpm -Shaft: Ø 38 x 80 mm -Design: B5 -Protection class: IP 54/55 -Dimensions: 450/300/H250 mm -Weight: 43 kg

Edge banding, edge trimming. Veneer roll -Edge tape: edge banding approx. 62 rolls -Type: various designs, see photos -Price/Sale: complete -Dimensions: 1120/630/H900 mm -Weight: 277 kg

Grinding wheel mount, standard flanges, special flanges, grinding wheel flange -Grinding wheel mount: Mounting diameter: Ø 76 mm -Shaft: Perforated shaft cone Ø 45-58 mm -Number: 3x mounting flanges available -Price: per piece -Dimensions: Ø 148 x 55 mm -Weight: 3.9 kg/pc.

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 45-58 mm -Type designation: 407x10-100x127 015 322 0020 -Quantity: 1x mounting flange available -Dimensions total Ø 180 x 105 mm -Weight: 6.5 kg

Suspension clamp, clamp sleeve, sliding gate sleeve, cable clamp, cable trolley, cable trolley component, cable holder, cable trolley -Manufacturer: Abus, 3 pieces cable trolley plastic with polyamide rollers -Type: flat cable -Shipping/Price: complete -Dimensions: 90/70/H75 mm -Weight: 0.1 kg/piece

Suspension clamp, clamp sleeve, sliding gate sleeve, cable clamp, cable trolley, cable trolley component, cable holder, cable trolley -Cable trolley: Cable trolley with polyamide rollers -Type: Round 10-16 mm -Number: 1 cable trolley available -Dimensions: 80/80/H93 mm -Weight: 0.1 kg

Full salad washing line 2 x Washing units, destoning, infeed conveyring, vibros, all electric panels Removed working and have wiring information as was installed and decommissioned by same engineers. Please message for more photographs

VM PLC CONTROLLED POWDER COATING RECIPROCATOR The powder coating reciprocator is designed for automated painting applications. It ensures perfect coating of the work pieces passing in front of it by moving the spray guns up and down in a single axis. It moves in one axis along the vertical guide column, providing maximum performance under daily working conditions withstanding continuous load. The brake drive motor and gearbox have been choiceed to ensure the reciprocator’s long life and performance under heavy working environment conditions. The mechanical system design with chain or belt provides silent and vibration-free vertical movement. Perfect coating is achieved with easy adjustment of stroke and speed. RECIPROCATOR CONTROL UNIT • Remote control panel 7" 65K color hand touch LCD screen, • Two reciprocators can be controlled independently from the same display, � ...

Control Fanuc ... 31i - B5 Clamping table surface ... 850x410mm Axis X ... 700mm Axis Y ... 400mm Axis Z ... 330mm Spindle speed ... 0-24000/min. controlled axes ... 5 cooling ... 35bar Spindle mounting... BBT30. Rapid traverse ... 54m/min Main engine power ... 4.7/14.2kW Max. table load ... 300kg L x W x H ... 2100x2165x2800mm Machine weight ... 2300kg Magazine slots ... 21 + Robot FANUC LR Mate 200iD The machine is in good condition, possible to test under electricity.

Power supply module, servo amplifier module, CNC control system, plug-in card -Manufacturer: FANUC -Type: A06B-6150-H075 -Dimensions: 300/380/H290 mm -Weight: 20.3 kg

Spreading trailer Schmidt pre-wetted salt, up to 24 m spreading width Trailer with Aebi-Schmidt "Stratos" spreader body, solids and brine tanks. Contents: grit 5 m³, liquids, e.g. brine: 5,200 ltr. Spreading width: 6-24 m in increments of 1 m Propulsion: Diesel engine Hatz 3M41 Operating control by remote control including remote engine start/stop and engine monitoring. Curb weight 6,500 kg, gross vehicle weight 20,000 kg, tyres 425/65R22.5 164J, Nato towing eye 76 mm! Built in 2002. Hardly used, min. corrosion, accident-free. Operating manuals with spare parts lists completely available. More winter service equipment in stock - see sample photos! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal,  ...

ABG OMEGA 510 Converter  Manufacturer: ABG  Machine type: Omega 510 Converter  Type: Blanco labelling machine  Year of construction: 2010  Working width: 520 mm  Number of punching stations: 2  Equipment:  Unwinding - 76 mm  Splicing table  Side edge control  Grid take-off and matrix rewinder/grid rewinder  Label converter/label shifter for 110x75 mm format (not ABG)  Slitting station with 4 shear blades  2 separate rewinding axes  Tools: o Magnetic cylinder 134 Z or 16.75" o Magnetic cylinder 161 Z or 20.125"

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: AROWA, three-jaw chuck chuck size Ø 200 mm -Passage: Ø 55 mm -Bolt circle: Ø 175 mm / M10 -Accessories: incl. 2nd set of interchangeable jaws -Dimensions: Ø200 x 105 mm -Weight: 13.8 kg

Machining center in continuous flow Usable width 1300 mm Working Dimensions X:4200 mm / Y: 1300mm / Z: 60 mm HSD Boring Unit 10 Vertical Drill - 3x2 Horizontal - 1Saw Blade) Working Speeds X: 100m/min / Y: 100m/min - Z: 20m/min 5.5 Kw I 7.50 HP ISO 30 HSD Spindle Motor Panel Handling with Double Clamping System (Independent Servo Control) Double Sided Air Flotation Working Table AES WOP CAD/CAM Program Piece Verification System with Laser Weight (Approx.) 3.500 kg

PLC controller, connection module for digital electronic modules, terminal module -Manufacturer: Fanuc, Terminal I/O Basic Dual Module -Type: A03B-0823-C001 A03B-0823-C003 -Price/Sale: complete -Dimensions each: 140/130/H150 mm -Weight: 0.9 kg

Make : Armfield Capacity : 40 litres Mixing : Silverson Mixer Processing vessel with cooling Usage : Pasteuriser and mixing vesle Model: FT 40 Make : Armfield Model : FT 75 Usage : Crystaliser Pin mixer Single tube Usage : Margarine and ice cream Make : Armfield Model : UHT Usage : UHT Pasteuriser All in excellent condition came out of university in UK

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control, converter, controller -Manufacturer: Power Automation, Servo Controller -Type: MI305 -Dimensions: 300/115/H250 mm -Weight: 3.8 kg/piece

CNC control, control rack, electronic module -Manufacturer: Power Automation / Innovance Technology, Control -Type: Replacement device ArtNo. 181998 -Individual components: see photos -Dimensions: 255/330/H140 mm -Weight: 5.7 kg

CNC control, control rack, electronic module -Manufacturer: Power Automation / Innovance Technology, CNC control -Type: PA8000 LW -Dimensions: 330/250/H130 mm -Weight: 5.9 kg

• For brochures, leaflets • Horizontal extension arm type 150, length 245 mm • Leaflet size: length max. 55 mm, width 50-105 mm • Speed max. 115/min, max. 20,000 leaflets/h • Adjustable amount of leaflets to be dispensed • Control unit VS-2002 right • Double-sheet detector • Fill level control magazine • Control via 18-pole plug-in coupling • Electr. connection 90-240V/50-60Hz