tetra pak a used for sale

Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter -Inch thread: 1/4 - 1 inch -Dimensions: 550/120/100 mm -Weight: 4.7 kg

Compact cell Fanuc ArcMate 100/7L with R30iB control, Lorch S3 pulse welder new Number of axles: 6 payload: 7Kg working range: approx. 1633 mm Year of construction: 2016 Table area each 750x500mm Overall dimensions: approx.:2500x1500x2200 Total weight: approx. 2000kg Net amount plus 19% VAT

Size dia 1500x1900mm

Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter -Inch thread: 1/4 - 1 inch -Dimensions: 385/120/110 mm -Weight: 5.1 kg

Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter -Inch thread: 1 -2 inches -Dimensions: 640/160/H130 mm -Weight: 8.7 kg

construction circular saw, circular saw -Engine power: 2.6 KW -Voltage: 220 volts -Dimensions: 885/670/H810 mm -Weight: 42 kg

Frequency converters, frequency converters, drive converters, controllers, variable speed drives, servo drives -Type: ACS60100163S00C1200901 -Input: 380-415 V 48/63 Hz -Output: 0...300 Hz -Price: per piece -Number: 2 pieces -Dimensions: 255/285/H420 mm -Weight: 18 kg

Saw blade, wood saw blade, circular saw blade -0040 420 30 -Ø: 420x3.5/3.00x30 -Z96: T 13.74 -n max.: 4300 -0317-1114700 HW -Price: per piece -Number: 3x available -Weight: 3.5 kg/piece

Consisting of : - 3 tanks of 18000 litres - 3 tanks of 15300 litres - With walkways - Material: AISI 316 - Square discharge door (bottom) - Motorised mash discharge - Round manhole DN 400 (cylindrical part) - Total emptying: ball valve Ø 40 Friedrich no 2 - Partial drain: ball valve Ø 40 Friedrich no 2 - Taster - Recirculation with ball valve Ø 40 Friedrich no 2 - Dome Ø 400 mm, eccentric - Central dome DN 400, with a cylinder-grid fixed inside (to keep the mash cake wet) Dimensions : - 3 tanks 18000 litres: Ø 2000 mm, height 5600 mm - 3 tanks 15300 litres: Ø 2000 mm, height 4800 mm - Ground clearance: approx. 550 mm

Arburg 420C-1000-350 (174) with challenge tape Item number: 174 Availability: In stock Year of construction: 2001 Brand: Arburg Specifications Spray weight: 210 g Clamping force: 1,000 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 420x420 mm Clamping plate size: 570x570 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 89,240 h Weight: 3430 kg Dimensions: 4.4x1.7 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes

Electric motor, three-phase motor -Foot: damaged -Handover: as is -Power: 14 kW -Speed: 2890 rpm -Shaft: Ø 35 x 90 mm -Construction: B3 -Dimensions: 580/370/H390 mm -Weight: 104 kg

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 1435 rpm -Shaft: Ø 22 x 50 mm -Design: B5 -Protection class: IP 44 -Dimensions: 365/290/H250 mm -Weight: 37 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Stroke: 25 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 2 pieces -Dimensions: 76/50/H50 mm -Weight: 0.4 kg/piece

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Topslide: PA59220-0125 -Stroke: 125 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 3 pieces -Dimensions: 290/55/H55 mm -Weight: 1.25 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Topslide: PA60300-0050 -Stroke: 50 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Price: per piece -Number: 2 pieces -Dimensions: 230/65/65 mm -Weight: 1.35 kg/piece

Naxos CNC Multi-Axis Cylindrical Grinder Year: 1987/2013 Max. swing: 630mm Max. distance workhead face to tailstock face: 4850mm Max. travel for Z axis: 5000mm Max. grinding distance for main wheel: 4520mm X axis infeed travel for both headstocks: 720mm Approx. weight between centers: 4000kg Power requirements: 460/3/60 This machine was completely remanufactured to new specifications in 2013 and installed in 2014. It was stripped down to the bare casting, table/base/wheel heads/work head and tailstock and the second z axis ways were fit and rescrapped. New electrical cabinet with all new wiring to the machine and new all components, hydraulic lines, air lines and new cable carriers were added. New Marathon 60HP motors for both grinding wheel heads. (The drives in the cabinet are set for 40 Hp) The spindle drives in the cabinet are Yakawa built in the USA along with the workh ...

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Topslide: PA60300-0050 -Stroke: 160 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Dimensions: 510/65/H65 mm -Weight: 2.7 kg

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 120 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 2 pieces -Dimensions: 165/40/H40 mm -Weight: kg

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 10 mm -Piston diameter: 50 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimensions: 68/68/H68 mm -Weight: 0.65 kg/piece

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 10 mm -Piston diameter: 50 mm -Piston rod: 16 mm -Price: per piece -Number: 5 pieces -Dimensions: 80/68/H68 mm -Weight: 0.65 kg/piece

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 30 mm -Piston diameter: 32 mm -Piston rod: Ø 12 mm -Price: per piece -Number: 2 pieces -Dimensions: 80/50/H50 mm -Weight: 0.4 kg/piece

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 40 mm -Piston diameter: 50 mm -Piston rod: 16 mm -Price: per piece -Number: 4 pieces -Dimensions: 96/68/H68 mm -Weight: 0.9 kg/piece

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Stroke: 10 mm -Piston diameter: 63 mm -Piston rod: 16 mm -Price: per piece -Number: 3 pieces -Dimensions: 68/87/H87 mm -Weight: 1.2 kg/piece

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Stroke: 50 mm -Piston diameter: 63 mm -Piston rod: 16 mm -Dimensions: 108/87/H87 mm -Weight: 1.65 kg

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 80 mm -Piston rod: Ø 16 mm -Price: per piece -Number: 2 pieces -Dimensions: 240/55/H55 mm -Weight: 1.05 kg/piece

Thermostat, sensor -Adjustment range: -10...+12 -Weight: 0.7 kg

Thermostat, sensor -Adjustment range: -10...+12 -Number: 2x available -Price: per piece -Weight: 0.7 kg

220 ton x 4000mm

Servo motor, electric motor, DC motor -Spare part comes: from a machining center BJM type ALBZ-145 -Max. Speed: 2500 rpm -Power: 3.97 kW -Torque motor: 21 Nm -Construction: B5 -Number: 2x motors available -Price: per piece -Dimensions: 370/140/H175 mm -Weight: 19 kg/piece

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Surface: very good -Width: 500 mm -Length: 800 mm -Height: 175 mm -Plate thickness: 26 mm -with: support ribs -Weight: 90 kg

(2) Asahi Sunac THP500-6 horizontal forging press (heading machine) Year: 2008 First stroke: 24 mm Second stroke: 50 mm Kickout power: 150 kN Open height: 625 mm Closed height: 425 mm Die (WxL): 500x490 mm Punch (WxL): 250x350 mm Ram stroke: 200 mm Forging force: 5000 kN Cycling time: 6.5 sec Crank speed: 60 RPM Machine weight: 28 t

A very well preserved VM 8 R screw compressor unit is offered. The electric motor has a power consumption of 30 kW. If you have any questions, please do not hesitate to contact us.

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Power: 0.55 kW -Input: 200-240 V 50/60 Hz 7.4 A -Output: 0-240 V 0-400 Hz 3 A 1.1 kVA -Number: 2x available -Price: per piece -Dimensions: 126/68/H140 mm -Weight: 0.8 kg

Central processing unit, control, switchgear, CPU -Central unit CP476 product number: 7CP474.60-1 -Interface module IF371 product number: 7IF371.70-1 -Analog output module AO352 product number: 7AO352.70 -Dimensions: 153/155/H62 mm -Weight: 0.7kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: ADVU-50-25-PA -Piston: Ø 50 mm -Piston rod: Ø 16 mm -Stroke: 25 mm -Max. Pressure: 10 bar -Price: per piece -Number: 2 pieces -Dimensions: 78/72/H72 mm -Weight: 0.7 kg

A new replacement level type VMX 110 RD is offered see pictures. If you have any questions, please do not hesitate to contact us.

AC spindle motor, electric motor, DC motor, servo motor -Spindle motor comes: from a Hitachi Seiki type HC400 machining center -Manufacturer FANUC Model 6 Type: A06B-1006-B700 -Power: 5.5/7.5 kW -Speed: 1500/6000 rpm -Shaft: Ø 32 mm -Construction: B14 -Brake -Dimensions: 700/260/H250 mm -Weight: 65 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: ADVU-80-60-APA -Piston: Ø 80 mm -Piston rod: Ø 20 mm -Stroke: 60 mm -Max. Pressure: 10 bar -Dimensions: 140/105/H155 mm -Weight: 2.3 kg

Key data: 550 , 92 , 32

Manufacturer: Boy Type: 55 AVV Year of construction: 2012 Control: Procan ALPHA Clamping force: 550 kN Type of lock: Hydraulish Spar spacing: 360 mm x 335 mm Plate size: 565 mm x 540 mm Tool installation height: min 250 mm Opening distance: 300 mm Plate spacing max.: 550 mm Screw: 32 mm Stroke volume: 96.5 ccm / 92.3 gram HP Injection pressure: 2127 bar General Motor: 11 kW Heating: 7,7 kW Dimensions: 3 m x 1.2 m x 3.7 m Weight: 2700 kg Screen text: German / English / French Additional equipment Robot interface

Folding machine Horizon 6 pockets and 2 knifes

Agfa CTP with developer format 103x77, 64 diods, year 2008

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Airtec Pneumatic: XL-040-0125-050 -Stroke: 125 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Dimensions: 53/53/H325 mm -Weight: 1.5 kg

2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch -2 pillars: punching tool -Dimensions: 170/100/H130 mm -Weight: 5.3 kg

Aventics R480163988, stroke 200 mm, piston diameter Ø32 mm, slotted cylinder Item Condition: New Damping pneumatic Compressed air connection G 1/8Hub 200 mm Piston diameter 32 mm Ambient temperature max. 60 °C Ambient temperature min. -10 °C Principle of action double acting Operating pressure max. 8 bar Operating pressure min. 3 bar

Shelf trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelving -Width: 1700 mm -Depth: 760 mm -Height: 1780 mm -Storage shelves: 4 -Price: per piece -Number: 1 pieces -Weight: 84 kg/piece

Offer up to 2 plasma power supplies here. Technical data, as shown in the picture.

adjustable gear motor, variable speed gear motor, electric motor -Motor manufacturer: ABM -Gearbox manufacturer: ABM -Motor power: 0.37 kW -Speed: 45 rpm -Construction: B3 -Drive shaft: Ø 30 mm -Protection class: IP 44/54 -Dimensions: 550/230/H195 mm -Weight: 30 kg

Respiratory protection filter -Clean AIR: basic 2000 -P SL R Art. No.: 80 00 10 -Price: per piece -Number: 17 pieces -Dimensions: Ø 131/54 mm -Weight: 0.1 kg/piece

Nibbling machine, nibbler, nibbler, tin snips, circular shears -Power: 330 watts -Voltage: 220 V -Max. Cutting capacity: 2 mm -Dimensions: 280/60/H150 mm -Weight: 2.3 kg

Thread cutter, tapping machine, tapping machine -Nominal consumption: 280 watts -Max. Cutting capacity: M8 -Connection: 220 volts -Dimensions: 290/200/H60 mm -Weight: 2.1 kg