tetra pak a used for sale

Agilent 5973 N inert MSD with GC Agilent 6890 N Network Agilent 5973 inert MSD with EI and turbomolecular pump enhanced BOC Edwards Turbopump Agilent GC 6890 Network with Split/Splitless Injector/EPC Edwards Vacuum Pump 1.5 MSD Productivity Chemstation E02.02 on PC/Win 10 NIST on request Option: Agilent Liquid Sampler, CTC or Gerstel MPS2 Sampler currently maintained/with warranty Installation on request

Injector, cyclone, distributor for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Pipe connection: Ø 190 mm -Cone piece: Ø 465 mm -Material: Aluminum -Transport dimensions: 493/465/H495 mm -Weight: 13 kg

Machine vise, sturdy vise, drill vise -Jaws depending on the workpiece geometry: movable -Jaw width: 65 x 87 mm -Clamping depth: max. 15 mm -Weight: 4 kg

power cable -Telephone cable: 19553 -4-core -Roll dimensions: Ø 800/480 mm -Weight: 34 kg

Manufacturer: Grundfos Type: CME 3-5 A-R-I-E-AQQE S-A-D-N Condition: as new (short in operation) Pump speed: 3480 1/min Nominal flow rate: 3.72 m³/h Nominal head: 49.62 m Number of wheels: 5 Ambient temperature: -20 .. 55 °C operating pressure: 16 bar Location: Homburg

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor: Siemens 2.2 kW -Voltage: 560 V -Speed: 3515 rpm -Volume flow: 1425 m³/h -Connection input: Ø 148 mm -Connection output: 390 x 330 mm -Dimensions: 650/520/H470 mm -Weight: 52 kg

-The machine is fully automated as a working process. Automatic filling with lifting device for standard carts type Laska 200 liters. The entire receiving hopper is automatically tilted by means of hydraulics and the mixture is unloaded in seconds. -With the help of the 2 Z-shaped augers, the highest quality and gentle mixing is carried out, especially important for achieving the structure of the minced meat! The machine is optionally equipped with a vacuum and a vacuum pump! Completely factory refurbished with delivery installation samples and training and 1 year warranty.

Profibus single module, Profibus single module, for PLC control, fieldbus, PROFIBUS, input module -Festo type: CP-A08-M12 18207 LN07 -Connection: 24V DC -Dimensions: 173/75/H60 mm -Weight: 0.5 kg

AUTOMATIC WINKEL WOLF KOLBE-ALEXANDERWERK 130 mm The machine is completely factory refurbished by MM SERVICE EOOD with 1 year full warranty.

Agritec floor reversing milling machine UKO 40-120, for PTO 540 rpm, power requirement 18.5-45 kw (25-60 hp) Three-point attachment frame Cat.1, working width 115 cm, total width 142 cm, lateral displacement hydraulic 26 cm, this also allows use on walls, fences, etc. Equipment with trailing grid roller for perfect seedbed preparation. Weight approx. 412 kg. Incl. cardan shaft with friction clutch. 30 knives - all new, ready for operation, incl. cardan shaft with friction clutch. Further reversing milling machine 130 cm working width in stock as well as conventional tillers from 100 to 150 cm, ploughs, cultivators etc.

Gear motor, electric motor -Speed: 141/1440 rpm -Hollow shaft: Ø 32 mm -Power: 3kW -Dimensions: 500/195/H240mm -Weight: 47kg

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling -Claw coupling: torsionally flexible claw coupling -Holes: Ø 22 mm / Ø 29 mm -Quantity: 1 piece available -Price: per piece -Dimensions: Ø 258 x 200 mm -Weight: 37.4 kg/piece

Electric motor, three-phase motor -Manufacturer: ABM Baumuller, electric motor type 3.DF 63 o-4/2 -Power: 0.18 / 0.25 kW -Speed: 1390/2820 rpm -Shaft: Ø 11 x 22 mm -Construction: B14 -Protection class: IP 54 -Dimensions: 205/160 / H130 mm -Weight: 4.8 kg

Clamping devices, clamps, deep clamping jaws, clamping pads, clamping tools, step clamps, low clamps, clamping irons, accessories -AMF: tension bracket -Thread size: M16 -T-nuts: mm -Dimensions: 175/60/H300 mm -Weight: 2.6 kg

Servo motor, electric motor, DC motor -Max. speed: 3000 rpm -Power: 1.92 kW -Motor torque: 8.6 Nm -Design: B5 -Number: 2x motors available Price: per piece -Dimensions: 312/108/H138 mm -Weight: 10 kg/pc.

Collectors' Item! Vertical Reproduction Camera 220V / 2550W / 50-60cycles (Hz) Dims L130 x W120 x H170 cm - 285 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Power: 0.1/0.75 kW -Speed: 12/53 rpm -Voltage: 380 V -Design: B3 -Shaft: Ø 39/50 mm/Ø 35/80 mm -Protection class: IP54/55 -Brake: 1.8 Nm -Quantity: 1 piece -Dimensions: 760/220/H265 mm -Weight: 51 kg

Magnetic drill, hand drill -Magnetic base: Magnetor type PS 32 L -Drilling machine: AEG type HBE-IV - Recording: MK2 -Max. Drill: Ø 23 mm -Connection: 265V/200Hz -Dimensions: 700/300/H670 mm -Weight: 49 kg

ABB Robotics Robot Parts number electric motors : PS 60/4-50-P-LSS-3612 PS 60/4-50-P-LSS-3613 The spare part is in good condition nevertheless, this is a used items, which has slight signs of wear, or may have.

Bevel helical gearboxes Manufacturer : Bonfiglioli Model : A 504 UH50 P90 LOE engine: Euromotori 1,1kw MS9016Year of construction 2008 NEW, unused from old stock for more information see pictures.

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, short-stroke cylinders, compact cylinders -Stroke: 50 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 3 pieces -Dimensions: 197/48/H48 mm -Weight: 0.75 kg/piece

Circuit breakers, motor protection switches, star-delta switches, reversing switches -Rotary switch: Vollenbroich type LNSE 6 ADT -Switch: 500 V/15 A -Shaft: Ø 15 x 35 mm -Dimensions: 350/300/H140 mm -Weight: 10.6 kg

Spiral housing Centrifugal pump Manufacturer: Allweiler Type: NT40-160 Diameter: 136mm 30m³/h H: 30m 3500 rpm Electric motor: Manufacturer: Siemens Type: 1LAZ1302AA90-Z 6.3kw NEW, from warehouse resolution for more information see pictures.

Die holder, notching tool, punching tool, punch, punching die, punching punch -Corner notching tool: punching on both sides -Material width adjustable from: approx. 200 to 440 mm -Stamping dimension: approx. 20 x 20 mm, see photo -Take: Ø 50 mm -Dimensions: 610/245/H380 mm -Weight: 122 kg

I sell a 4-axis CNC machining center Biesse Rover 24L with truss table Year of construction 2004. Configuration: 4-axis main spindle HSD freshly fully repaired / Water-cooled RS1600 Tool magazine 7 positions ISO30 on the head 1x groove saw X-direction Drill head 14+4+2 drilling spindle Usable work surface 4500x1330mm. 2 work surfaces, 4 clamping zones Automatic system of Central Lubrikazion Combined power 35kW XDNC 2.01 software with operating instructions. Pump Becker 250/300 m3/h. 5,5KW Additional vacuum for stencil work or additional clamping devices. Good condition. Available from stock. Need for repair: handles on the truss table, Rotazion from ISO30 magazine on the head

sheet width: - plate thickness: - plate length: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ayen Knothole Drilling Machine ED 08-4, Machine No.:270 316, 0,6kW, 380volt, 1420 rpm,

Universal screwdrivers, construction screwdrivers, screwdrivers, electronic screwdrivers, power screwdrivers, electric screwdrivers -Nominal consumption: 400 watts -Max. Screw capacity: 10 mm -Connection: 220 volts -Price: per piece -Number: 11 pieces -Dimensions: 420/140/H80 mm -Weight: 4 kg/piece

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic stamps, air stamps, compact cylinders, short-stroke cylinders -Stroke: 320 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Dimensions: 470/47/H47 mm -Weight: 1.5 kg

Name: High Pressure Pump Manufacturer: Abel Type: AK57/105 Year of construction: 1977 Material: Normal steel Drive motor: 55 kW Dimensions: L 2500 x W 1100 x H 1000mm Empty weight: 1200 kg Speed: 326 rpm Flow rate: 240 L/min operating pressure: 100 bar Operating voltage: 380/660 V Protection class: 44 Flanges: DN 65 Condition: Used Note: Frequency range: 50 Hz, Protection class: 44, Flanges: DN 65 Price: On request

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, compact cylinders -Stroke: 50 mm -Piston diameter: 50 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimensions: 100/65/H65 mm -Weight: 0.75 kg/piece

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder - Stroke: 160 mm - Piston diameter: 40 mm - Piston rod: 16 mm -Price per piece -Quantity: 2 pieces -Dimensions: 325/55 / H55 mm -Weight: 1.40 kg / piece

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 200 mm -Piston diameter: 20 mm -Piston rod: 8 mm -Dimension: Ø 27 x 333 mm -Weight: 0.3 kg

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 125 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 30 x 270 mm -Weight: 0.4 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, short-stroke cylinders, compact cylinders -Stroke: 50 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 30 x 192 mm -Weight: 0.3 kg/piece

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 250 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Dimension: Ø 30 x 393 mm -Weight: 0.5 kg

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 10 mm -Piston diameter: 50 mm -Piston rod: 18 mm -Dimensions: 63/67/H67 mm -Weight: 0.55 kg

clamping force: 1.300 kN injection volume: 230 cm³ screw diameter: 45 mm platen size: 685 x 685 mm Condition: used, Specification: injection moulding machine for TPE - used including Koch dosing unit clamping unit: - clamping force: 1.300 kN - heating platen size: 685 x 685 mm - Clear distance between tie bars: 470 x 470 mm - Mould installation height min.: 250 mm - Distance between platens max.: 900 mm - Opening stroke max.: 650 mm - Ejector stroke: 225 mm Injection unit: - Screw diameter: 45 mm x 18D - Injection volume max.: 230 cm³ - Injection part weight: 210 g/hp - Max. injection pressure: 1,670 bar - Screw circumferential speed: 75 m/min - Cylinder heating: 4x 2,200 W - Nozzle heating: 600 W - Connection value: 3x 400 V, 50 Hz - Electrical connection (back-up fuse): 100 A - Weight approx.: 6,3 ...

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, short-stroke cylinders, compact cylinders -Stroke: 30 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 3 pieces -Dimensions: 80/50/H50 mm -Weight: 0.35 kg/piece

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Topslide: PD44645-0280 -Stroke travel: 280 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Dimensions: 805/65/H65 mm -Weight: 3.6 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Stroke: 15 mm -Piston diameter: 16 mm -Piston rod: 8 mm -Price: per piece -Number: 3 pieces -Dimensions: 58/29/H29 mm -Weight: 0.1 kg/piece

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Stroke: 30 mm -Piston diameter: 50 mm -Piston rod: 16 mm -Price: per piece -Number: 15 pieces -Dimensions: 107/68/H689 mm -Weight: 0.8 kg/piece

Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Oscillator Model: ED-WS -Year of construction: 2017 -Voltage: 220 V -Dimensions: 210/210/H130 mm -Weight: 2.6 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Power: 0.55 kW -Input: 200-240 V 50/60 Hz 7.4 A -Output: 0-240 V 0-400 Hz 3 A 1.1 kVA -Number: 11x available -Price: per piece -Dimensions: 170/70/H185 mm -Weight: 1.3 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: ADVU-63-50-APA -Piston: Ø 63 mm -Piston rod: Ø 16 mm -Stroke: 50 mm -Max. Pressure: 10 bar -Price: per piece -Number: 2 pieces -Dimensions: 115/85/H175 mm -Weight: 1.8 kg

Electric motor, three-phase motor -Power: 0.35/0.5 kW -Speed: 660/1325 rpm -Shaft: Ø 24 x 50 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 330/199/H230 mm -Weight: 10.3 kg

Specifications: - working width 3100 mm - max. cutting capacity St 40 8 mm - Engine backgauge 10 - 750 mm - front angle stop - Stroke rate up to 30 per min - Drive 400 V / 2 x 6.5 kW - Space requirement incl. backgauge, without front support arms - approx. W 4250 x H 1500 x D 2450 mm - Weight approx. 11000 kg

Pneumatic cylinder, compact cylinder -Festo: ADV-16-40-A -Stroke: 25 mm -Piston rod: Ø 25 mm -Number: 3x available -Price: per piece -Dimensions: 125/125/H102 mm -Weight: 2.5 kg

Stick electrodes 4.0 x 450 -Type: Navalend 70 -Price: per package -Number: 3 packages available -Weight per package: 5.6 kg

Stick electrodes 4.0 x 450 -Type: Navalend 71 -Weight package: 6 kg