tetra pak a used for sale

Volume : 1000 and 1500 ml Format : Slim

Tetra Pak TBA19 330 ml Prisma Filling Line General Information: - Manufacturer: Tetra Pak - Model: TBA 19 – Version 010V - Year of Make: 2003 - Capacity: 6,000 packs/hour - Filling Volume: 330 ml - Format: Prisma - Condition: Very good used condition Line Overview: Complete Tetra Pak filling and secondary packaging line for 330 ml Prisma carton packs, designed for reliable and efficient production in dairy and beverage applications. The line combines a proven Tetra Pak TBA19 filling machine with a brand-new cap applicator and a cardboard packer, ensuring modern functionality and high operational reliability. Ideal for producers looking for a cost-efficient, ready-to-install solution with upgraded components. Main Components: - 1. Filling Machine - Make: Tetra Pak - Model: TBA 19 – Version 010V - Capacity: 6,000 p/h - Volume: 330 ml - Format: Prisma ...

REFURBISHED TETRA PAK TRAY SHRINK TTS 51 FOR SALE YEAR 2010 Item #: Usm-222 Category Packers and Shrink Refurbished Tetra Pak Tray Shrink, Model TTS 51, Year 2010 Condition: Refurbished

USED TBA 19 125ML SLIM FILLING LINE FOR SALE YEAR 2006 Item #: Usm-213 Category Tetra Pak TBA 19 TBA 19 125ml Slim Filling Machine, version 30v, Year 2006 Straw Applicator TSA 21 Tetra Shrink 51, Year 2006 Conveyors and Paper Trolly Condition: Good and Still on Production.

Next REFURBISHED TETRA PAK MULTI SHRINK 65 YEAR 2001 Item #: Usm-224 Category Packers and Shrink Refurbished Tetra Pak Multi Shrink 65, Year 2001 Excellent condition, test run approved.

USED TETRA PAK TBA 19 250ML EDGE FILLING LINE FOR SALE YEAR 2009 Item #: Usm-217 Category Tetra Pak TBA 19 Used Tetra Pak TBA 19 250ml edge Filling line for sale. 1-TBA 19 250ml edge filling machine, version 30v, year 2009, working hour 35000 2-Cap Applicator 30, Cap Flex 30, Year of manufacturing 2017, Working Hours 17000 3-Maak Packer Turner 4-Tetra Pak Easy ride and conveyors control system 5-paper trolly and conveyors Condition: excellent condition and still on production.

PreviousNext USED TETRA PAK A3 SPEED 200ML SLIM FILLING LINE FOR SALE YEAR 2010 Item #: Usm-221 Category Tetra Pak A3 Speed Used Tetra Pak A3 Speed 200ml Slim Complete Filling Line For Sale A3 Speed 200ml Slim Filling Machine, Year 2012, version 300v, Speed 24000 Packs Per Hour Helix Accumulator Straw Applicator TSA 22 Cardboard Packer 30 Speed Conveyors and Paper Trolly Condition: Line Still on production, can be seen on production. Tetra Pak maintained.

USED TETRA PAK TBA 19 250ML BASE 30v FILLING LINE FOR SALE Item #: Usm-234 Category Tetra Pak TBA 19 One used Tetra Pak tba 19 250ml base filling line for sale. 1-TBA 19 250ml Base filling line, year of manufacturing 2007, Version 30v, working hours 11900 2-Straw applicator tsa 21 3-tetra pal shrink tts 51 4-20m Tetra Pak conveyors and easy ride 5-Paper trolly Condition: Good

USED TETRA PAK TB 19 250ML BASE 20V FILLING LINE FOR SALE Item #: Usm-235 Category Tetra Pak TBA 19 Used TB 19 250ml Base Filling Line available for sale 1-TB 19 250ml Base Filling Machine, Year 2003, Version 20v, Non Aseptic 2-Straw applicator TSA 21 3-Easy ride and conveyors 4-Shrink TTS 51 Paper trolly and spare parts

USED TETRA PAK TBA 8 1000ML SLIM FILLING LINE FOR SALE Item #: Usm-236 Category Tetra Pak TBA 8 ONE USED TETRA PAK TBA 8 1000ML SLIM COMPLETE FILLING LINE FOR SALE. 1-TBA 8 1000ml Slim Filling Machine, Year of manufacturing 2001, Version 100v, working hours 23000 2-Tetra Cap Applicator Flex 30 for helicap 23, Year of manufacturing 2014 and working hours 7000 3-Tetra Pak Packer 70 4-Conveyors system and Paper trolly Complete line is in working condition and Tetra Pak maintained.

REFURBISHED TETRA PAK TBA 19 200ML SLIM 30v FILLING LINE FOR SALE Item #: Usm-237 Category Tetra Pak TBA 19 Refurbished TBA 19 200ml Slim 30v Filling Line for sale 1-TBA 19 200ml Slim Filling Machine, Year of manufacturing 2007, Version 30v, Working hours 30000 2-Straw applicator TSA 21 3-Multi Shrink wrapper 65 4-20meter conveyors and Paper trolly Condition: refurbished and test run approved.

USED TETRA PAK A1 TCA 200ML FILLING MACHINE FOR SALE YEAR 2013 VERSION 900v Item #: Usm-238 Category Tetra Pak A1 Used Tetra Pak A1 TCA 200ml Filling Machine For Sale. Year of manufacturing 2013c version 900v, speed 14000 packs per hour. Working hours 5920 Conversion to 65ml available.

BRAND NEW TETRA PAK UHT STERILISER PASTERURISER 5000 LPH FOR SALE YEAR 2019 Item #: Usm-239 Category UHT Plants BRAND NEW TETRA PAK UHT STERILISER PASTERURISER 5000 LPH FOR SALE YEAR 2019 TECHNICAL DATA: Tetra Pak Automated uht for high acid beverages. The heat treatment in the steriliser is base on plate heat exchanger. TEMPERATURE PROGRAM: FOR TEA: 5Brix Heating: 25°C to 140°C (4 seconds) Cooling: 140°C down to 25–80°C FOR JUICE: 12Brix Heating: 25°C to 120°C (30 seconds) Cooling: 120°C down to 25–80°C CONDITION: B

USED TETRA PAK TBA 19 250ML SLIM FILLING LINE FOR SALE YEAR 2003 Item #: Usm-240 Category Tetra Pak TBA 19 USED TETRA PAK TBA 19 250ML SLIM FILLING LINE FOR SALE YEAR 2003 TBA 19 250ml Slim Filling Machine, Year of manufacturing 2003, Version 10v, With ASU Straw Applicator TSA 21 Multi Shrink 65 Conveyors and Paper Trolly Condition: Refurbished and Test Run Approved. Excellent Condition.

USED A3 FLEX 200ML SLIM 150v FILLING LINE FOR SALE YEAR 2008 Item #: Usm-241 Category Tetra Pak A3 CF/Flex USED A3 FLEX 200ML SLIM 150v FILLING LINE FOR SALE YEAR 2008 A3 Flex 200ml Slim Filling Machine, Year 2008, Version 150v, Working Hours approx 25000, Speed 9000 packs per hour Straw Applicator TSA 21, YEAR 2009 Film wrapper 67, YEAR 2008 Packer TCBP 70, YEAR 2008 Conveyors and Paper Trolly Condition: Dismantled and Packed in Wooden Box.

USED TETRA PAK A3 FLEX 1000ML 150v GEMINA FILLING LINE FOR SALE YEAR 2007 Item #: Usm-242 Category Tetra Pak A3 CF/Flex USED TETRA PAK A3 FLEX 1000ML 150v GEMINA FILLING LINE FOR SALE YEAR 2007 A3 Flex 1000ml Gemina Filling Machine, Version 150v, Year of manufacturing 2007, Speed 7000 Packs per hours, Working hours 43250 Cap Applicator Cap Flex 30, Year of manufacturing 2007, Cap Type Helicap 27 Conveyors and Paper trolly Condition: Good

USED TETRA PAK TBA 9 200ML SLIM FILLING LINE FOR SALE YEAR 1993 Item #: Usm-243 Category Tetra Pak TBA 9 USED TETRA PAK TBA 9 200ML SLIM FILLING LINE FOR SALE YEAR 1993 TBA 9 200ml Slim Filling Machine, Version 130v, Year 1993 Straw applicator TSA 36 Shrink TTS 51 Conveyors and Paper trolly Condition: Good

Used Used Blow Moulding Machine Terta Pak Dynablow db 30: Year: 1998 Condition: Good Used Blow Moulding Machine Terta Pak Dynablow db 30: Year: 1998 Model: DYNABLOW DB 30 Speed: 3.000 Bph Number of cavities: 3 Type: Linear Compressor NOT included Chiller NOT included Safety protections Code: W 90 More details: https://bottlingscout.com

Lower filling pipe, previously used on a Tetra Pak A3 Flex 250 ml Slim 100V., Type of Machine: Aseptic carton filling machine, Dimensions: 84 x 9 x 9 cm, Weight: 2 kg

Tetra Top Cleaning unit (TTCU) previously used on Tetra Pak TT/3 2000 carton filler for Tetra Top 250 Mini Eifel C38 cartons. The external Tetra Top® Cleaning Unit offers excellent cleaning and disinfection of your hygiene chamber. You can clean and disinfect both sides simultaneously or choose to clean and disinfect one side at a time. One unit is able to clean up to two Tetra Pak® TT/3 filling machines. 3x separate vats for P3-oxonia active S, Mip CA and P3-horolith V. Integrated centrifugal pump (11 kW). Control panel with PowerFlex40 frequency converter and ABB RVG200 operator panel. 6x valves with pneumatic actuator (Air Torque AL-79)., Type of Machine: Cleaning unit, Development step: -0200, Production hours: 1.166 hours, Drawing Spec.: 2866825-0200, Dimensions: 145 X 125 X 295 cm, Weight: 850 kg

Tetra Top Sprue Remover Unit (SRU) for removal of the small plastic particle on top of the Tetra Top packaging after filling/closing, previously positioned after a Tetra Pak TT/3 2000 carton filler for Tetra Top 200 and 250 ml Mini cartons with a A5 38 screwcap. Including stainless steel control panel and separate operation panel., Type of Machine: Sprue Remover Unit, Capacity: 4.500 pieces per hour, Type of carton: Tetra Top 200 and 250 ml Mini cartons, Development step: - 0100, Drawing Spec.: 3434618-0100, Weight: ± 325 kg

Tetra Top Granulate Supply Unit (GSU) previously used on Tetra Pak TT/3 2000 carton filler for Tetra Top 200 and 250 ml Mini cartons with a A5 38 screwcap. Including side channel blower and vacuumpump from Gardner Denver, G-BH1 2BH1510-7HH57, 4 kW - 345 / 415 V - 50 Hz - 2.920 rpm, pressure: 390 - 440 mbar and control panel with Allen-Bradly PLC., Type of Machine: Granulate Supply Unit, Capacity: 9.000 pieces per hour, Type of carton: Tetra Top 200 and 250 ml Mini cartons, Development step: - 0500, Drawing spec.: C-1025041-0500, Weight: ± 250 kg

Tetra Top Sprue Remover Unit (SRU) for removal of the small plastic particle on top of the Tetra Top packaging after filling/closing, previously positioned after a Tetra Pak TT/3 2000 carton filler for Tetra Top 200 and 250 ml Mini cartons with a A5 38 screwcap. Including stainless steel control panel and separate operation panel., Type of Machine: Sprue Remover Unit, Capacity: 4.500 pieces per hour, Type of carton: Tetra Top 200 and 250 ml Mini cartons, Development step: - 0100, Drawing spec.: 3434618-0100, Weight: ± 325 kg

Unused Servo Control for a Tetra Pak Cap 30 Flex. Tetra Pak article number: 90605-9390. Official Tetra Pak description: Servo-Antrieb, K5500 EtherNet/IP 528VAC., Type of Machine: Servo drive, CAT NO: 2198-H025-ERS, Instructions: 2198-IN001x-xx-x, MAC Address: 40:41:01:E0:74:10, Main input: 195-264/324-528 Vac 8.3 Arms 3 Ph 50/60 Hz, Control input: 24 Vdc 2.8A, Motor output: 0-460 Vrms 3 Ph 0-590 Hz 8 Arms Continuous, 20 Arms Peak

Unused Complete Outlet Triclamp including Outlet Pipe + Sleeves + Impellors Tetra Pak BM618 / BM714 Bactofuge, Machine unit number or subassembly description: 562012-03 according outlet device drawing., Type of Machine: Complete outlet

Tetra Pak Tetra Spiraflo Tubular Heat Exchanger (THE) previously used in a dairy for whey protein as pre-heater with indirect hotwater preparation (15 - 70 °C), holding section (1 - 3 minutes) and cooling section (65 - 10 °C)., Unit exist out of:, - 7x tubes for pre-heating (Tetra Pak MT-38/1x20s-6, total surface area: 2,25 m2, product connection DN25, hotwater connection DN20 with indirect hot water system with plate heat exchangers, pumps (CH18-10 A-W-G-BQQV - 7,5 m3/h - 0,72 kW), steam valves (Samson), expansion vats, manual valves and interconnecting piping., - 9x tubes for cooling (Tetra Pak MT-70/4x16s-6s-1, jacket: 20 bar - 110°C - 16 liter, inside: 50 bar - 110 °C - 3,6 liter, total surface area: 10,17 m2, product connection DN38, (ice)water connection DN50)., - Flowmeter (Endress+Hauser - Promag 300)., - Holding tube, DN 40 (6x 6 meter), complete with bracket and swivel bend ...

Unused Inlet Device, Clamp coupling for Tetra Pak 618 - 718 - 818 Separators., Ref 22 - Part No 548412 01 - Inlet housing, Ref 23 - Part No 538247 04 - Clamp coupling, Ref 24 - Part No 538248 03 - Gasket, Ref 25 - Part No 541709 80 - Elbow pipe, Type of Machine: Inlet device, clamp coupling

Unused Outlet Pipe + Sleeves + Impellors of a Tetra Pak HMRPX 618 Separator., Ref 1 - Part No 540493 02 - Outlet pipe, Ref 3 - Part No 581978 01 - Guide sleeve, Ref 16 - Part No 540527 02 - Impellor bottom part Ø 140 mm, Ref 20 - Part No 540519 02 - Impellor top part Ø 140 mm, Ref 26 - Part No 540551 01 - Spacing sleeve, Ref 38 - Part No 540528 02 - Impellor bottom part Ø 120 mm, Ref 40 - Part No 540520 02 - Impellor top part Ø 120 mm, Type of Machine: Outlet set

Unused Tetra Pak Pressure Gauge, 0 - 10 bar / 0 - 1.0 MPa., Model: 233.50.100 LBM 990.22 1 1/2 Tri-clamp 10bar/MPa., Part No: 90522-0172., Type of Machine: Pressure Gauge

Tetra Pak desserts pilot UHT plant with an pasteurisation, indirect and/or direct (VTIS) heating module @ 225 ltr/h and only a pasteurisation step @ 125 ltr/h, previously used in a R&D centre for desserts., Indirect unit, skid mounted, including:, - Open level tank, serial number: DFB-5259-BT01, year 2008, 50 ltr with propellor agitator (Lightnin ECL-M59-25)., - Feed pump (mono / screw pump, Netzsch, NM031BH02S12H, serial number 387231, year 2007, 120 - 300 ltr/h, speed 20 - 80 rpm, discharge pressure 2 bar, product temperature 5 - 20 °C)., - Lobe pump, Alfa Laval, SRU1/005/LD, serial number 431441, year 2008, motor: 0,37 kW, 400 V, 50 Hz, n1: 1.360 rpm, i: 15,57 n2: 89 rpm., - Heating module A, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17997., - Heating module B, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17999., - Heating module C, centrifugal pump: Al ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

The TBA 8 V110 1000ml Square is a space-saving Tetra Pak solution for safe, aseptic filling of liquids. Their square design ensures maximum stability and efficient display on the shelf.

The TBA 8 is one of the most reliable Tetra Pak machines around. The TBA 8 shown here is equipped for filling liquid foodstuffs with a volume of one litre of Slim. The machine is from development stage V 100. With an output of 6000 packages per hour, it corresponds to the standard speed of a TBA 8. The filling machine is overhauled by us in our own workshop in Germany. In the course of the work, many wearing parts will be replaced, and all electrical, pneumatic, hydraulic and mechanical systems will be checked. After the change of parts is completed, we start extensive testing to verify the flawless production of the machine. For this purpose, the system is fully connected and we produce sample packs filled with water during the final adjustments. In doing so, we can adjust the final details as precisely as possible. If you are interested in a TBA 8, we will be happy to send you an exte ...

Recommended as a line with PT 8, TCAP 47, Packer TCBP 70. Originally developed for 1.5 liters, this machine with this volume produces 6000 packs per hour. The V100 development stage and the special feature of the final sealer system, which requires one star, make the machine special. Smooth running and durability with consistent quality are the hallmarks of every TBA 8. After the extensive service check in our workshop, we pay particular attention to the correct settings of the system for reuse. It is particularly important to us to adjust mechanical and electronic systems flawlessly in order to avoid later malfunctions. The pneumatics and hydraulics of the system must be carefully checked and maintained. Many of our customers have already been able to convince themselves of this during the work. Even after many years, these systems are ready for further use after our overhaul. A cost-ef ...

The further development of the TBA 19 V10 was initially called V 20. The main changes can be seen at first glance in the control system and the final sealer. Like its predecessor, the system produces 7500 packs per hour in this format and does not differ from the TBA 19 V 10 previously known. The further development of the TBA 19 includes extensive innovations in the control and mechanics of the plant, which can lead to an improvement in efficiency in constant operation. As with all other machines, smooth and efficient operation requires consistent adherence to service intervals. The operator on the systems should be intensively trained and have sufficient experience in operation. This system also undergoes all the necessary tests and inspections before handover. Our customers are invited to this at any time in order to be able to inspect the machine in operation during the acceptance pr ...

Tetra Pak Fino TFA/3 1000ml filling machine, built in 2006, hourly running time approx. 18,000. The Tetra Pak Fino TFA/3 is a filling machine for flexible plastic bags (Fino packs) with a filling volume of 1000 ml.

The TBA 19 line in the 125ml Slim format is particularly suitable for products that are filled in small and slim cardboard packaging. For example, tomato paste or dairy products. It enables reliable and efficient packaging in Tetra Pak cartons.

The Tetra Pak TB 19 is a filling machine for carton packaging in the refrigerated products sector. It was developed for the hygienic, but non-aseptic filling of pasteurized foods such as fresh milk, cocoa or other liquid dairy products. It enables reliable and efficient packaging in Tetra Pak cartons and is particularly suitable for products with a limited shelf life.

1 of used beverage carbonator, make TetraPak, type Alcarb Spark, new 2010, capacity 45.000 lph at 10 g/l. With pump, CO2 injector, Endress & Hauser flowmeters, valves, Siemens S7 plc controls, Danfoss VFDs, holding tank 9.959 L (8.000 L net), etc. Ask for further details.

2-station machine, Preform silo, - guide and - set-up. For an extra price: compressor + moulds. Power up to 2900 bottles/hour

Blow volume 0.2 - 10.0 ltr. Capacity: up to 1200 bottles/hour NEW MACHINE, 1-station machine, incl. preform bunker and feeder. Gergen Supplement: Compressor, refrigeration unit and moulds

PET stretching / blowing machine, up to 3000 bottles / hour, incl. preform bunkers, conveyors and feeders. Available for an additional charge: moulds for 0.3-2 l., compressor and cooling unit

Blow volume 0.2-2.0 ltr. PET stretch blower, 3 blow stations, capacity: up to approx. 3,600 bottles / h. Incl. preform bunker, lift and sorter, Available at extra cost: compressor, cooler and moulds

TBA 19 200 SQ in excellent condition only 11000 Hrs

Tetra Laval Food bowl cutter with lifter for 200 liter meat bins and ejector, type: VSM500, serial number: 288/162, year of construction: 1995, 400 V, 3 Ph, 50 Hz, 400 A, s/s bowl, volume: 500 liter, dimensions: 4720 mm x 3180 mm x 2150 mm. Including Busch vacuum pump, type: 400-212.2709, dimensions: 1550 mm x 820 mm x 1600 mm.

The TRE PAK DIM Cap Applicator is a specialized piece of equipment used in the packaging industry for applying caps to various types of containers. Here are some of its key functions and features:, - Automated Cap Application: The DIM Cap Applicator automates the capping process, ensuring that caps are applied quickly and uniformly across a production line. This reduces labor costs and increases efficiency., - Versatility: This machine can handle a variety of cap styles and container shapes, making it suitable for different product lines in food, beverage, pharmaceutical, and cosmetic industries., - Precision Control: The applicator is designed to apply caps with accurate torque settings, which ensures that caps are not over-tightened (which can lead to damage) or under-tightened (which can result in leaks)., - Integration Capability: The DIM Cap Applicator can be seamlessly integrated i ...

Valve matrixes, completely mounted with switchboards, IFM proximity switches, wiring, etc.in very good condition, was in operation until March this year. Island 1 consisting of 25 pieces A-L SMP-SC spillage free mixproof valve, DN65, double seatlift and flush on lower seal, in 5x5 configuration. 37 pieces A-L SRC valves, different types, DN65 and DN50. 4 pieces A-L LKAP valves Island 2 consisting of 24 pieces A-L SMP-SC spillage free mixproof valve, DN65, double seatlift and flush on lower seal, in 6x4 configuration. 24 pieces A-L SRC valves, different types, DN65 and DN50. 5 pieces A-L LKAP valves

cutting range for steel to: 76 mm capacity at 100%: 51 mm cutting medium: 400 Amp regulated drive: 50-150 und 100 - 400 AmpSteuerSteuer control voltage: 24 Volt weight of the machine ca.: 750 kg dimensions of the machine ca.: 82 x 122 x 930 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.