We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,281 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Tetra Pak Model Tray Shrink Bundler. Capable of speeds up to 17 units per minute. Right Angle infeed. Set up for a 2 x 6 tray pack
used
There are two identical filling machines available, format: 1000ml, output: 7000l/h, with Packer Tetra Pak TCBP 70-1200 and Capper Trepak Capper 120, available in May 2024.
used
Jumbo reel Truck from Tetra Pak for handling packaging material reels. Model SH 8ES/3 from 2004. It is an electrical model.
used
Make : Tetra Pak Model : TBA 21 Format : 1 L prisma Working Hours : 64,000
used
Manufacturer : Alfa Laval Model: Tetra Pak C10-KSM Year: 2013 Type: Plate heat exchanger / pasteurizer Application: Pasteurisation Exchange surface: 227.5 m2 Fluid group: 2 Liquid volume: 897.0 L Max. pressure: 10.0 bar Max. temperature: 120?C Sections: 5 Plates: 73 + 131 + 33 + 105 + 35
used
Manufacturer : Alfa Laval Model: Tetra pak C10-SM Year : 2005 Type: Plate heat exchanger Application: pasteurizer Fluid group: 2 Volume: 533 L Pressure: 0/16.0 bar Temperature: 0 / 110?C Sections: 5 Plates: 64 + 66 + 40 + 20 + 31 units
for 200, 250 and 330 ml
used
PT 8 is the ideal combination for TBA 8. We offer this item according with our Filling Lines. Alternatvely a PT 10 can also be used.
used
From the TBA/3 Jaw System: pre-assembled complete yoke left hand and yoke right hand with left hand arm, right hand arm etc. Condition: Unused/new Subject to being unsold
1000 ml, 750 ml, 500 ml, 250 ml,
new
Item number 1334989-0101 Level Sonde for TBA 21 aseptic filling machine
used
Pack carton packages into trays
used
We have a TBA8 1.5 liter for sale. Is was manufactured in 1999, the full line is for sale. There is an easy ride plus a TCA21 and TCAP70, it will do 2x4 and the pack is wraparound.
used
2-station machine, Preform silo, - guide and - set-up. For an extra price: compressor + moulds. Power up to 2900 bottles/hour
used
PET stretching / blowing machine, up to 3000 bottles / hour, incl. preform bunkers, conveyors and feeders. Available for an additional charge: moulds for 0.3-2 l., compressor and cooling unit
new
Blow volume 0.2 - 10.0 ltr. Capacity: up to 1200 bottles/hour NEW MACHINE, 1-station machine, incl. preform bunker and feeder. Gergen Supplement: Compressor, refrigeration unit and moulds
used
Blow volume 0.2-2.0 ltr. PET stretch blower, 3 blow stations, capacity: up to approx. 3,600 bottles / h. Incl. preform bunker, lift and sorter, Available at extra cost: compressor, cooler and moulds
used
6 stations machine, blow volume 0.2-2.0 litre, capacity: approx. 7,200 bottles / hrs, incl. preform containers, loaders and sorters. Available at an extra cost: 0.5 + 2.0 ltr. CSD 6-speed moulds, compressor system, cooling unit
new
Motor control card Bendingroller for TBA / 8 ASU
used
TEMPERATURE CONTROL for 90V TBA/8 aseptic filling machine 90410-0051
used
Decorative holding card TMCC
new
Item number 558321-0101 IH switching card for TBA 8 aseptic filling machine
new
SKU: 90025-0055 Power supply TPMC PLC for aseptic filling machine TBA 8
new
Item number 90025-0017 Input card TPMC PLC for TBA 8 aseptic filling machine
new
Item number: 90458-0601 Photocell for TBA 21 jaw system aseptic filling machine
new
We offer: Roller E 247165 Defect roller Crushing roller for TBA 8 aseptic filling machine Intermediate sale reserved
used
1-A3 Flex 1000ml Gemina Filling line with two extra volume change kits 500ml and 750ml Year of manufacturing 2016 2-Cap applicator Cap Flex 30 3-Helix Accumulator 90 meter 4-Date printer 5-Conveyors 200 feet 6-Paper Trolly
used
working hours 18'685 at the customer's request, we will send photos and a video
used
TBA 9 250ml Base Filling Machine , version 120v, complete machine in good condition
FULLY REFURBISHED TR 7 ESL WITH SCREW CAP WITH UPDATES
used
TETRA SHRINK TS51 LONG OVEN V180 MANUF. IN 2007 SERIAL NR. 75670/00305 CAPACITY 1200 TRAYS/HOUR EXCELLENT CONDITION
used
Used UF system ALPMA / TETRA ALVA LAVAL This plant was used for the following products: -Cream cheese - Quark (low-fat quark as well as quark with 20% and 40% FiT) - Skyr - Concentration of milk 3.7% fat to 37% dry matter Depending on the product, the hourly output is approx. 3,500 - 5,000 litres (milk intake) with a service life of 8 hours. The plant consists of 3 stages: Stage 1: - 6 pressure pipes 6" with 2 spiral winding modules each (filter type SPIRA-CEL DS-UP-IP020-6338E1 Mikrodyn Nadir GmbH) - Filter area per module: 13.4m² - Total filter area: 160.8 m² - Centrifugal pump 145 m³/h, 3.5 bar, frequency converter controlled Stage 2: - 4 pressure pipes (same design as stage 1) - Filter area: 107.2 m² - Centrifugal pump: 160 m3/h, 5 bar, frequency converter controlled Stage 3: - P&F module DSS M37/9/2 from TETRA ALFA LAVAL, 9 m² - Displacement pum ...
used
wire electrode, welding wire, welding wire -Manufacturer: Tetra, welding wire V 309 LG -Thickness: O 1.2 mm -Dimension: O 300/100 mm -Weight roll: 12 kg
used
Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...
used
Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...
used
Bacterial removing separator (Bactofuge). Self cleaning. Machine comes with the bowl, motor (37 kW - 1480 rpm - 400 V - 50 Hz - 68 A), desludge cyclone, some service tools for maintenance and waterbox (original Alfa Laval)., Excluding:, - Control panel, - Motor cover, - Base plate and feet, - CPM-valve for the pressure regulation, Capacity: nominal 15.000 liter per hour and flow rate max: 25.000 liter per hour., Type of Machine: Bactofuge (Bacterial-Removing Centrifuge), Capacity: 15.000 liter per hour, Bowl speed: 5.069 rpm, Motor: 37 kW - 1480 rpm - 400 V - 50 Hz - 68 A
used
TBA 8 1000 Sq 100V in excellent condition It was a 1000 Slim in 1997 and was fully upgraded and converted to 1000 Sq by Tetrapak Italy in 2010.
used
There are two Thermoforming Machines TETRA LAVAL 3000 available, current: 30A, voltage: 380V, yera of construction machine 1/ 2: 1995/ 1996.
used
Output: 8-10 cycle/min, film width: 524/ 520mm, controls: SIEMENS SIMATIC S7-300.
used
TETRA PAK APPLICATOR TCA21, RECAP-3, MANUF. IN 2002, IN EXCELLENT CONDITION. HAS ONLY 5300 RUNNING HOURS
used
2015 Tetra pak tetra pak TT MIDI 250ml, 330 ml, 500 ml TT BASE 500ml, 750 ml, 1000 ml. Running hours-31151. We operated by BASE from 2013.03…2018.11 Running hours-27145. We operated by MIDI from 2015.08…2018.11
used
1 aseptically filling Elo-Pak line suitable for ESL milk and fruit juice Int. Designation: new hall composed of: a.) 1 aseptically filling Elo-Pak filling machine Int. No. II 103 built by Fa: Shikoku Type: U-980 A Serial No. 455 Year of construction 2007 with 3 format options, 0.33, 0.5 and 1.0 l Output: 11,000 U/h for fruit juice in use in operation until the end of January 2019. The following annexes to the Elopak line are: 3 rows of individual packaging transport lanes from polycetting, length to Meuerer carton packing system approx. 23 m with curves 3 Elopak ceiling stackers Year of construction 2004; with screw cap magazine with Yet stream transport railways into the 3 lid storage containers 1 carton pack vending machine for 6 units in the box, partially open at the top Type: Ba-6-30; Serial No. 50325-210 Manufacturer: Meurer Year of construc ...
used
Silver coin Pakistan 150 rupees 1976 proof conservation, silver .925 35 gr, tarnished, encapsulated, KM42
used
Silver coin Pakistan 100 rupees 1976 proof conservation, silver .925 28.28 gr, tarnished, encapsulated, KM40
used
Rotary actuator, hydraulic motor HKS rotary actuators Type: DA-H 125 - 180 Rotation angle 180 Operating pressure max. 210 bar Nominal torque max. approx. 5000 Nm Shaft diameter 70 mm Shaft pin length 140 mm Keyway width in the shaft 20 mm Flange diameter 222 mm Centering diameter 150 mm bolt circle 195 mm Connection thread 1/2 flange with 8 mounting holes 18 mm - 2 pieces screw-in fittings from 1/2 to 16S Overall length housing without drive shaft, without centering edge 384 mm Overall length housing with drive shaft 535 mm Weight 70 kg very good condition - New, unused from stock dissolution; used
used
Uhlmann UPS5ET blister machine for alu/alu blisters, including Uhlmann 149 buffer system. Maximum blister size 272 x 284mm (draw x width), maximum depth 40mm. SyPro feeding system for syringes etc with flexible robotic arm and vacuum grip head. Seidenader camera product presence checking system, VISIOtec VisoScan blister integrity tester, gas flushing with Dansensor MAP Check Combi for measuring the gas content within the pack. Domino D550+ laser printer with Seidenader print control camera. Output up to 400 blisters per minute. As new, with only 350 production hours.
used
ARBURG ALLROUNDER Arburg Allrounder 720 S 3200-1300 - Plastic Injection Machine screw size:70 mm injection shot weight in Polysterol:984 g/PS closing pressure:3500 kN core drawing:2 control:Selogica daylight:720 x 720 mm opening stroke:700 mm mould height - Max./min.:300 -700 mm daylight between platens - max.:1000-1400 mm weight of the machine ca.:17,7 t - highly wear-resistant plastification unit - Technology step 3 - hydraulic plant with 3 regulating pumps - Technology step 2 - servo-controlled / two-circuit pump technology - Increased power for heating control circuits 1-6 to 3.6 kW each - clamping force increased to 350 Mp - mould blow unit 1 with pressure reducer - mould blow unit 2 with pressure reducer - Core pull 1 - Core pull 2 - Interface for robot system according to EUROMAP 12 - Host computer interface for ALS with communication node Ethernet
new
Advantages of Aflatek AirPro500W: -Large 500l air tank -12.5bar maximum pressure. -Powerful 7.5kW belt-driven motor. -3 cylinder multistage air compression. -Mounted on 4 rubber wheels, portable. Technical data: Power supply , V: 3Ph 400V 50Hz Motor Speed, rpm: 730 Motor power, kW: 7.5 Motor power, HP: 10 Air supply, L/min: 800 Maximum pressure. Bar: 12.5 Maximum pressure, Psi: 181 Air tank, L: 500 Dimensions(length x width x height), mm: 1840x600x1130 Weight, kg: 260 Shipping details: Packaging: Plywood box on a pallet Dimensions(length x width x height), mm: 1900x650x1200 Weight, kg: 280 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.
new
Advantages of Aflatek Air50: -50l air tank, longer operation time. -Mounted on 2 rubber wheels, portable. -Easy to use. -Requires little maintenance. Technical data: Power supply , V: 230 Motor Speed, rpm: 2850 Motor power, kW: 1.8 Motor power, HP: 2.5 Air delivery, L/min: 206 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Air tank capacity, L: 50 Dimensions, (length x width x height), mm: 840x430x690 Weight, kg: 30 Shipping details: Packaging: Carton box Dimensions, (length x width x height), mm: 850x450x710 Weight, kg: 32 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.
used
Squeezers for fillings, Rademaker,