tetra pak a used for sale

used baler Manufacturer: ABBA Type: ACOMAT 400 H3A Year of Make: 2008 specifications: Press force: 45 t Drive power: 7.5 kW Throughput capacity: approx. 45 m³/h Filling opening: 1,150 x 850 mm Channel format: 790 x 730 mm (W x H) Bale size: 790 x 730 x length in mm (W x H x L) Binding: 3-fold horizontal Wire push-through: seen in the direction of pressing on the left side Machine dimensions: approx. 4,250 x 2,580 x 2,000 mm (L x W x H) Machine weight: approx. 3,600 kg

Impressions=0 m, Condition= Good , Availability= 2025-11-03, Pile turner Max weight 500kg Top working condition

Manufacturer: SUSS Model: MicroTec ACS200Gen3 Year of Manufacture: 2021 Electric Power: - Voltage: 400V 3-phase + N + PE - Power: 16 kVA - Frequency: 50 Hz - AIC: 100 kA / 400 VAC - FLC: 23 A - SCCR: 5 kA - Max. Single Load: 5.5 A Pneumatic Connections: - CDA (Air): 6 bar ±10% - Nitrogen (N₂): 6 bar ±10% - Vacuum (VAC): -0.8 bar ±0.1% - DIW (Deionized Water): — bar Compliance: CE Marked Find more here - / Contact us at -

x-axis: 4000 mm y-axis: 3200 mm z-axis: 1200 mm distance between columns: 2700 mm spindle motor: 50 / 65 kW spindle turning speed range: 15000 U/min distance spindle nose and table: 200 - 1400 mm rapid traverse: m/min table-size: 4020 x 2400 mm workpiece weight: 15 t Control: Heidenhain TNC 640 total power requirement: - kW weight of the machine ca.: 44 t dimensions of the machine ca.: - m Machine equipped with: X, Y, Z, B, C five axes simultaneous movement control - CNC control Heidenhain TNC 640 - 40-position tool changer (HSK-A100) - 2-axis milling head TCH-19F -- B- & C-Axis - X,Y,Z-axis linear scales - IKZ 20bar - Tool off-set - Oil skimmer - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-ray accident investigation workstation available for sale. The Bucky workstation shown in the photos is included. The generator and the two measuring chambers in the table and wall-mounted grid stand are not included. Included components: - Ceiling-mounted tripod with X-ray tube, depth stop, and control arm - X-ray table - X-ray stand (lung stand) Additional items for sale: - 9 mobile stands (including stands for Philips MP 40 monitors with X3) - 5 boxes, each containing 2 gas cylinder holders for Evita V300/V500/V600 ventilators - 1 bed scale (Seca) (as new) - 1 wheelchair scale (Seca) (as new) - 1 Manujet III (VBM Medizintechnik) - 1 Microspeed uni (Aesculap) - 1 TruLight 1000 examination light (Trumpf) (very good condition) - 1 hemodynamic monitor PICCO - 1 Leon Plus anesthesia machine Find more here - / Contact us at -

Manufacturer: ADIGE Model: LT652/B Year of Manufacture: 2002 Machine Description: - Tube laser system LT652, manufactured in 2002. - Equipped with a CO2 laser source with 2 kW power. - Loading length: 6500 mm - Unloading length: 3500 mm The machine is in good technical condition for its age. The cooling system requires occasional maintenance. Find more here - / Contact us at -

Components: control cabinets, machine body (cabin, turbines, outlet, inlet), platform with processing unit and bunker, sound insulation cabin, impact box, bucket elevator, gratings, ladder, pre-impact box, small parts, piping, cable ducts, blasting media and refill silo, compressed air connection: 1/2 inch at 4–6bar, compressed air consumption: approx. 1.5m³/h, processed according to DIN ISO 8573-1, solid particle size: 1µm, density: 1mg/m³, water content: pressure dew point 3°C, oil content: 1mg/m³, length: 11,000mm, height: 5907mm. An on-site inspection is possible.

Used Arol M-KAMMA PKV automatic capping machine for overcap caps (caps for pressure caps on bottles with 1881 thread). YEAR OF MANUFACTURE: 2013 NUMBER OF CAPPING HEADS: 24 DIVISION WHEEL DIAMETER: 720 mm CAPACITY: 45,000/h The set includes: octabin tipper, pneumatic transport and capping machine. Documentation in Polish and English.

The machine is in good technical condition, testing is possible by prior arrangement.

Height=1.6 m, Overall length= 1.6 m, Overall width= 1 m, Used, working conditions. Dough sheeting machine-

Single-Screw Screw diameter 25 mm Dimensions (LxWxH) 1860 x 900 x 1850 mm Options • Including haul-off Bo Usvri Dded Dvycslp • Including cooling bath

grinding length: 1000 mm grinding width: 750 mm workpiece height: 700 mm Control: SIEMENS, SIMATIC S 7-1500 table surface area: 1050 x 640 mm table height over floor: 1000 mm table speeds: 3.000 - 30.000 mm/min cross feed of table continual: 5 - 5.000 mm/min cross feed of table intermittent: 0,1 - 65,0 mm vertical adjustment, 1 graduation: 0,002 mm rapid traverse vertical: 0,25 m/min grinding spindle speed: 50 - 2.500 U/min grinding wheel size: ø 400 x 50 x ø 127 mm workpiece weight: max. 1.000 kg table load: max. 1600 kg total power requirement: 33,2 kW weight of the machine ca.: 9,3 t dimensions of machine L x W x H: 4,50 x 2,37 x 2,65 m - complete electronic / electric renewed in 2018 Accessories: magnetic plate 1000 x 650 mm, grinding wheel with flange, wheel trueing attachment, extraction The data for this ad was created with ModulMWS - the software solution of Log ...

Deze extruder van Cincinnati staat bij Plastima Used Machinery in de machineopslag. De machine komt uit 1999. Speciale opmerking: de extruder mist de versnellingsbak. Bj Usq Tr T Rod Dvycjlp – Merk: Cincinnati – Model: Titan 45R-APC – Bouwjaar: 1998 – Conische dubbele schroef extruder – Schroef Ø: 45 mm – Werkuren: 64.082

amount: 1 STK Tool holder These chucks are designed for high-speed machining. These are precision tools from the Italian company DAndrea The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting table SEEWER RONOD, type: SFT 362, A23 -refurbished- - Cutting table for pastries - Cutting section - with some cutting blades and cutting rollers -Reel More information on request. Visits and test runs are possible by arrangement.

Clamp length: - mm Clamp width: - mm 0: - Nm Glass bead nailer 2 P Jumbo automatic E.C. - new - Your advantages: - The corner connections are closed - No open glazing bead joints - There are no color differences when painting - The glazing bead frames are easy to assign Clamp corner joining machine 2P Jumbo Automatic E.C. for clamping glazing bead frames. Choice between automatic and manual operation, With angle system, clamping device from above and front Pressure can be regulated separately. Inserting parallel and superimposed ones Clamps possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot valve. -------------------------------------- Price in this version on request! Plus packaging/shipping Additional prices: --------------------- Movable work table height adjustable from 700 - 1000 mm, 2 pieces of support bars can be plugg ...

AMB pre-shredding machine type 753 The plant is already completely dismantled, incl. the hydraulic aggregates and would be ready for pick-up The machine was built in 2004 and was used by us for the pre-shredding of household and bulky waste. It then served as a backup from 2010 to 2022. We have already dismantled the machine and hydraulic unit and stored them on site. Before dismantling, we carried out another test run - without any problems. As the plant had already been dismantled, there was no time pressure. As part of the optimization of the system, the manufacturer AMB installed two additional drives for the shafts - as can be seen in the pictures. Find more here - / Contact us at -

Continuously motion folding box cartoner with automatic blister infeed. Mechanical output up to max. 300 cycles/min. TThe unit is fitted with: blister infeed, GUK Leaflet folder, coding device, Reject station, vacuum pump. PLC: SIEMENS Type: Simatic S7-300

Clamping Force: 220 ton // Shot Weight (Max): 625 g

Screw Diameter: 35 mm // Output Capacity: 25 kg/h

Container Size (Max.): 2,5 l

Injection stretch blow moulding machines for PET bottles

ATiB HTUB 80/100-L RF Charger HTUB is the top-of-the-line RF charger designed for the highest performance. This range includes all the main characteristics of RF ranges in terms of efficiency, Power factor, ventilation, internal structure (dedicated 3 compartments) and general flexibility. An integrated digital interface with OLED display and integrated USB enables the best and easiest overview/setting of charging parameters, diagnostic and data reports. Main features AC mains voltage: 480Vac (3ph) 50-60Hz / 600Vac (3ph) 50-60Hz Display: OLED/LCD display, 4 LEDs and 4 control buttons Setting Type: OLED Display: Current, Capacity and 7 pre-set Charging Characteristics Through PC laptop/USB port: advanced programming Data storage: report on the last 50 charges and important technical data (integrated USB port) Cooling System: Dedicated air cooling directly to the heat sink ...

Output: 60 U/h // Volume (Max): 20000 ml

Output: 40000 U/h // Bottle Size: 0,5

Output: 9000 U/h // Bottle Size: 200ml-2l

A filling machine Ammann used in the dairy industry is available. Cup diameter: 95mm, cup height: 122mm. Including filling heads and various accessories. Documentation available. An on-site inspection is possible.

Manufacturer: AGIE Model: FUTURA V 1PM Electrical Specifications: - Voltage: 400 V - Frequency: 50/60 Hz - Phase: 3 PH - Circuit Breaker Power: 17 kVA - Power Factor (Cos φ): — - Full Load Current: 15 A - Full Load Power: 3.9 kVA - Amp Rating of Largest Motor/Load: 3.4 A - Overcurrent Protection: 20 A @ 480 V ~, 18000 AIC Weight: 265 kg Condition and Maintenance: Last service performed at the end of 2021 (running hours: 9107). The machine has been used only a few hundred hours since. Overall in good condition. Find more here - / Contact us at -

A cup cartoner Ammann is available. Cup type: 95mm cup, max. cup diameter: 95mm, carton dimensions X/Y: 470mm/330mm, configuration: 3x6, packaging capacity: approx. 15000cups/h. Machine dimensions: approx. 2500mm/2500mm/2400mm, weight: approx. 1700kg. The machine was rebuilt in 2008. An on-site inspection is possible.

APV PASTEURIZATION SYSTEM FOR FISH BROTH 1,000 LITRES/HOUR Automatic system designed for the pasteurization of 1,000 litres/hour of strained fish broth for subsequent packaging. Manufacturer: APV Year: 2002 OPERATION DESCRIPTION: - Inlet temperature: 20 °C - Process temperature: 105 °C - Outlet temperature for packaging: 35 °C The whole process consists of different stages that can be programmed using the control panel: 1. Sterilization: carried out by the circulation of hot water at a temperature of 115-120 °C for 30 minutes. 2. Production with water: cooling water flows inside the circuit until the process temperature that will be applied to the product is reached. 3. Production: the unprocessed product is fed into the regulation tank and then the production phase takes place in the circuit. 4. Cleaning-in-place: the installation is cleaned in place by ...

An Atlas Copco piston compressor is available. Motor power: 4kW, max. operating pressure: 11bar, intake capacity: approx. 633l/min, delivery rate at 7bar: approx. 412l/min, speed: 1000rpm, tank capacity: 270l. Machine dimensions: approx. 1500mm/500mm/1200mm, weight: approx. 125kg. Documentation available. On-site inspection possible.

The machine is in excellent condition. It can reach 9 bags per minute with milk from 3Litres to 25 Litres

Aquila Technic TD404C-670 pressure washer, - with max. pressure 400 bar, - Flow rate: 37 l/m, - Dead weight: 1250 kg, - hz.Gg.: 2000 kg, - reparaturbedürftig

Works wonderfully

A mobile high-performance construction site compressor Atlas Copco for drilling applications is available. Design: tandem, volume flow: 28m³/min, max. operating pressure: 25bar, motor power: 368kW, engine: Scania DC13, fuel tank capacity: 600l, fuel consumption per hour at 75% and 100% load: 55l/77l. Machine dimensions X/Y/Z: approx. 6000mm/2100mm/2500mm, weight: approx. 7400kg, operating hours: approx. 650h. Including aftercooler, water separator, and PF filter. Documentation available. On-site inspection possible.

The roll slitter type RKS is well suited for slitting narrow rolls of micro-finishing films, tape qualities as well as light abrasive materials with a roll width up to 620 mm., SWISS QUALITY MANUFACTURING, Roll width up to 320 mm and 620 mm., Unwind station for rolls up to ø750 mm., Shear cut knife system on knife shafts consisting of upper and lower knife., Variable speed drive up to 100 m/min., Rewind station for rolls up to ø500 mm., For light abrasive materials like micro-finishing films, tapes and other special qualities., Unwind station:, Unwind station for rolls up to ø750 mm., Unwinding with pneumatically expandable unwind shaft for cores with ø75 mm., Pneumatically adjustable unwind brake., Cutting system:, Shear cut knife system on knife shafts consisting of upper and lower knife for fast change of cutting width., Rewind station:, Rewind station for rolls up to ø500 mm., R ...

Tube Packing Machine Manufacturer: TRANSNOVA-RUF / ABB Type Robot Packer Hours 3630 Very good condition Current setting 100 tubes /min Documentation available

Applikon Pilot System 50L fermentation system Stainless, 50L pilot fermentation system

max. format 36 x 36 cm Year of construction 2010 Banding device Computer control with monitor US 2000 Corner Slider CL Banding Station for paper and foil tapes max. stacking height 30 cm Mobile substructure Delivery date: immediately Price on request. We supply and install worldwide.

Mounting plate with Martin M03 mount, - Recording: Martin M03, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Properties: Length 780 mm Total height 2400 mm Motor power 0.25 kW Depth 780 mm Volume 931 L Steel as a material Description: Front flange - DN 50 reduction Flange rear - reduction DN 50 bottom: Disc valve DN 100 Motor: 0.25 KW

Mounting plate with Martin M03 mount and retaining lug, - Recording: Martin M03, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Brand: Atlas Compo Type: GX5C FF with integrated refrigeration dryer Kind: Screw compressor Serial number: AII642955 Chassis number: 8152101195 Year of construction: 2004 Cooling: Air-cooled Weight: 198kg. Assets: 5.5 kW Sound level: 64 dBA Work pressure: 10 Bar Compressed air: Capacity Approx. 10.0- 10.1 liters/second Length mm: 145cm Width mm: 55cm Height mm: 130cm State machine: Very good Electrical connection: 3 phase Missing parts: No Photos/film available: Photos available 10.2.192

Mounting plate for Hammer HM250 with Martin M03 mount, - Suitable for Hammer HM250, - Recording: Martin M03, - Hole pattern: 29 x 29 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate for Hammer HM250 with Martin M03 mount, - Suitable for Hammer HM250, - Recording: Martin M03, - Hole pattern: 29 x 29 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate for Hammer HM250 with Martin M03 mount, - Suitable for Hammer HM250, - Recording: Martin M03, - Hole pattern: 29 x 29 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate for hammer HM100 with Martin M03 mount, - Suitable for Hammer HM100, - Recording: Martin M03, - Hole pattern: 26 x 26 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate for hammer HM100 with Martin M03 mount, - Suitable for Hammer HM100, - Recording: Martin M03, - Hole pattern: 26 x 26 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Ref. no.: 18643 Manufacturer: ARBURG Year of construction: 2008 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 470 x 470 mm Mould height min.: 250 mm Opening width: 750 mm Injection unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight: 141 g Injection pressure: 2500 bar Measurements and weight Dimensions: 4,6 x 1,6 x 2,1 m Machine weight: 4850 kg Additional information & extras Core pull: 1 pcs Further information: Communication card for ProSeS interface is available (OPC-UA). Robot interface is available (EUROMAP 67). he Golden Edition is a special version of the well-established ALLROUNDER C series, known for its optimized hydraulic performance, stable production process, and high reliability. The machine has a clamping force of 150 tons and is ideally suited for the production of technical plastic parts as well as applications requ ...

clamping force: 1500 kN injection volume: 141 g/PS screw diameter: 35 mm platen size: 470 x 470 mm Condition: used, Specification: horizontal injection moulding machine, Type: Allrounder 470C 1500-400 GE GOLDEN EDITION Injection unit: - Screw diameter: 35 mm (wear-resistant) - Centring ring diameter: 125 mm - Max. shot weight: 141 g (PS) - Injection pressure: 2,500 bar Closing unit: - Clamping force: 1,500 kN - Max. opening stroke: 750 mm - Mould installation height: min. 250 mm - Mould clamping plates: 470 x 470 mm - Approx. operating hours: 79,000 h (still in use) - Operating voltage: 3x 400 V, 50 Hz - Nominal motor heating current: 75 / 40 A - Total current: 115 A - Total connection: 65 kW - Core pulls: 1x - Hot runner control points: 6x - Temperature control unit interfaces: 6x (20 mA) - Approved for high temperatures  ...