tetra pak a used for sale

B&A REF:  9213 TON: 60 SCREW DIAMETER:  25MM SHOT WEIGHT: 45 STROKE VOLUME:  49CM3 INJECTION PRESSURE:  2240AR PLATEN SIZES:  446 x 446MM DBTB: 320 X 320MM MIN MOULD HEIGHT:  200MM MOULD OPENING STROKE:  350MM MAX DAYLIGHT:  550MM EJECTOR STROKE:  125MM CONTROLS: SELOGICA CORE PULLING: 1 MOTOR: 15 HEATING CAPACITY: 8.9KW SCREW DRIVE:   HYDRAULIC

Aircooled chiller AERMEC NRB0800 L 217 KW Cooling capacity: 217 kW / 61.7 tons (12/7 — 35°C) Year of manufacture: 2019 Options: Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 4 pcs. COPELAND ZP235KCE-TWD-522 (scroll) Type of refrigerant: R410а Number of fans: 4 pcs. (EC-fan) Hydraulic module: 2 pcs. water pump LOWARA PLM112RB14S2/340 E3, 2 pcs. expansion vessel, buffer tank. Dimensions: 2.78x2.2x2.45 m. Weight: 3590 kg. Working hours: 0/0/0/0 h. Condition: Outlet

Two identical Hyfra refrigeration units are available. Cooling capacity: 25kW, refrigerant: R410A, refrigerant charge: 4kg, max. operating pressure: 42bar, medium: water, pumps process/standard: 2/2, pump type: CM3-4/CM5-5. Machine dimensions X/Y/Z: approx. 1650mm/750mm/1600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible.

working length: 2050 mm : 2.0 mm max. wire thickness: 3.0 mm Underfloor: 110 mm motor strength: 165 mm motor strength: 22 kW bending speed: 5.2 mm/min length: 3150 mm height: 1150 mm width: 850 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Boom suitable for Volvo ECR 88 (year of construction 2005, s/n: 10296)

Specifications: Manufacturer: Lid Type: FP1 active Control: Heidenhain Active TNC113 Year of Make: 1977 Colour: grey Travels: X 300, Y 160, Z 340 mm Spindle Speed: 40 – 2,000 rpm. Tool/movement Tool holder: SK40 (S20x2) Feed: infinitely adjustable Active feed: in X and Z axis Dimensions and weight Weight: approx. 800 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: The machine is in very neat original condition. Original lidded cabinet with various mounts and dividing head

Vögele Super 800 asphalt paver, Technical specifications:, - Operating weight: 6100kg, - max. operating weight: 6300kg, - Operating hours: 3260h, - Year of construction: 2007, - bunker side wall hydraulically foldable, - ready for immediate use, Equipment:, - AB200TV Bohle, - 2x 35cm extensions

Screw-on plate with Martin M10 mount, - Suitable for demolition & sorting grapples:, - GRP450, - GR45, - GRP750, - GR75, - Mount: Martin M10, - Hole pattern: 36 x 48 cm, - Made of mechanical steel S355, - Dimensions see product pictures, - Immediately available from stock

170 cm width, height 130 cm, length: 200 cm, with SW03 mount

Mounting plate with MS03-Symlock mount and retaining lug, - Recording: MS03, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate with MS08-Symlock mount and retaining lug, - Recording: MS08 Symlock, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate with MS08-Symlock mount and retaining lug, - Recording: MS08 Symlock, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate for hammer HM300 with MS08 mount, - Suitable for Hammer HM300, - Recording: MS08, - Hole pattern: 34 x 40 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate for hammer HM300 with MS08 mount, - Suitable for Hammer HM300, - Recording: MS08, - Hole pattern: 34 x 40 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate for hammer HM300 with MS08 mount, - Suitable for Hammer HM300, - Recording: MS08, - Hole pattern: 34 x 40 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate for hammer HM300 with MS03 mount, - Suitable for Hammer HM300, - Recording: MS03, - Hole pattern: 34 x 40 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate for hammer HM300 with MS08 mount, - Suitable for Hammer HM300, - Recording: MS08, - Hole pattern: 34 x 40 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Toscrew plate for hammer HM100 with MS01 holder, - Suitable for Hammer HM100, - Recording: MS01, - Hole pattern: 26 x 26 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Toscrew plate for hammer HM100 with MS01 holder, - Suitable for Hammer HM100, - Recording: MS01, - Hole pattern: 26 x 26 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate for hammer SB70 with MS01 mount, - Suitable for Hammer SB70, - Recording: Martin M02, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate for hammer SB70 with MS01 mount, - Suitable for Hammer SB70, - Recording: MS01, - Hole pattern: 13.5 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

90 cm working width, 17 cm intake width

15 cm working width, pick-up width 19.5 cm

LxWxH: 40x46x45 cm,

Replacement tooth small suitable for Hammer RH25 Demolition Pulverizer

PEIFFER electric motor 8.3 kW, 1400 rpm, drive drum 740 x 310mm

Screwing plate / hammer plate / demolition grapple plate / sorting grapple plate suitable for Hammer and Mustang GRP250 and GR25

Knott single-axle trailer chassis

Atlan Copco compressor trailer - model XAS 76 Dd, including Swiss papers, complete operating instructions and spare parts list, Technical specifications:, - Volume flow:4.2 m³/min, - Dead weight:920 kg, - Engine power:30 kW, - max. pressure:7 bar, - Energy source:diesel

BIG safety work basket with forklift attachment

180cm extension length, Suitable for tines up to max 130x50mm, € 230,- excl. VAT (per pair)

180cm extension length, Suitable for tines up to max 130x50mm, € 230,- excl. VAT (per pair)

180cm extension length, Suitable for tines up to max 130x50mm, € 230,- excl. VAT (per pair)

Pallet fork extension, 180cm extension length, Suitable for tines up to max 130x50mm, Price per pair excl. VAT.

2450 h, with 3 hyd. Side brush, 3-cylinder diesel engine, high dump, sweeping width: 1.52 m, maximum theoretical sweeping capacity 30,500 sqm / h, 1810 kg net weight, dimensions approx. 2480 x 1440 x 2030 mm

Control Other AMNC-3i Travel X/Y/Z [mm] 3000/1500 Specifications Punching Machine EMK-3612MII (58) Punching force 300 kN Positioning accuracy ± 0.1 mm Number of tool stations 58 Machine Frame Bridge Frame Machine Table Type: Brush Table Punching Drive Servo-Electric Dual Drive Travel area (X x Y) 1525 x 3050 mm Control AMNC-3i (21.5" screen size) Equipment Punch & Forming Function Good parts flap Scrap conveyor belt system Dimensions Length 5436 mm Width 6212 mm Height 2342 mm Weight 21500 kg

arm length: 3600 mm total column height: ca 5500 mm weight max. in kg: 1000 kg travel of hook: 3000 mm height of hook: ca. 4000 mm weight of the machine ca.: 1,5 t dimensions of the machine ca.: 6,0 x 2,0 x 1,0 m Pillar Type Swivelling Crane - Electric chain hoist 1 SN Speed: 4.6 / 1.2 m/min - with trolley System is dismantled. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bending capacity: 3/8"-2" Bending angle: 180° Angle turret: 6-fold Mounted bending tool: Ø 28 mm Country of origin: Netherlands Motor power: 3 kW Machine weight: 250 kg Machine LxWxH: 1,000 x 800 x 950 mm

Key data: 4000 mm, 2000 mm

Cutting surface: 2,000 x 4,000 mm Top height: 290 mm Weight: 5 ton

Key data: 554 mm, 2000 mm

Turning length: 2,000 mm Turning diameter: 554 mm above bed 370 mm over cross slide Spindle bore: Ø 104 mm Spindle speeds: 2,000 rpm 3-jaw chuck: Schunk Ø 350 mm Camlock Control: GE Fanuc Equipped with: - 1x Fixed bezel Ø 245 mm - 1x Fixed bezel Ø 390 mm - 18 Ready tool containers - Various jaws for food - Centering tips - Cooling system -Operating instructions Country of origin: UK Motor power: 7.5 kW Machine LxWxH: 410 x 200 x 175 cm Machine weight: 3600 kg

Manufacturer: Shinkawa Model: ACB-3000 Year of Manufacture: 2010 Condition : Good Electrical Rating - Supply Voltage: 230V - Full Load Current: 7A - Maximum Ampere Rating of the Short-Circuit and Ground-Fault Protective Device: 15A - Short-Circuit Current Rating: 10kA - Phase: Single Phase - Frequency: 50/60Hz Find more here - / Contact us at -

Manufacturer: ASYS Model: BCO 01 Year of Manufacture: 2016 Nominal Voltage: 230 / 115 VAC Frequency: 50 / 60 Hz Full Load Current:0.35 / 0.7 A Working Voltage: 24 V DC Number of Phases: 1 Power: 0.07 kW Circuit Breakers: 3.15 A Find more here - / Contact us at -

Manufacturer: ASYS Model: BC0 02 Year of Manufacture: 2016 Nominal Voltage: 230/115 VAC Frequency: 50/60 Hz Full Load Current: 0.6/12 A Working Voltage: 24 V DC Number of Phases: 1 Power: 0.11 kW Circuit Breakers: 3.15 A Find more here - / Contact us at -

Nieuwe Airpress schroefcompressors 10 PK /7,5 Kw op 500 lier perslucht ketel met een vriesdroger direct coupled Capasiteit 100 liters per min

For sale is an AvK DIG 130 k/4 generator with the serial number 83 31639 A101. This model was originally paired with a Jenbacher 612 engine with design number R049. The generator has an output of 3,000 kVA at an output voltage of 6,300 V. The year of construction is 2013, the operating hours so far are 60,000. A Megger test was performed. The price of this generator is 15,000 euros. For more information or to arrange a viewing, please contact us.

used baler Manufacturer: ABBA Type: ACOMAT 400 H3A Year of Make: 2008 specifications: Press force: 45 t Drive power: 7.5 kW Throughput capacity: approx. 45 m³/h Filling opening: 1,150 x 850 mm Channel format: 790 x 730 mm (W x H) Bale size: 790 x 730 x length in mm (W x H x L) Binding: 3-fold horizontal Wire push-through: seen in the direction of pressing on the left side Machine dimensions: approx. 4,250 x 2,580 x 2,000 mm (L x W x H) Machine weight: approx. 3,600 kg

Impressions=0 m, Condition= Good , Availability= 2025-11-03, Pile turner Max weight 500kg Top working condition

Manufacturer: SUSS Model: MicroTec ACS200Gen3 Year of Manufacture: 2021 Electric Power: - Voltage: 400V 3-phase + N + PE - Power: 16 kVA - Frequency: 50 Hz - AIC: 100 kA / 400 VAC - FLC: 23 A - SCCR: 5 kA - Max. Single Load: 5.5 A Pneumatic Connections: - CDA (Air): 6 bar ±10% - Nitrogen (N₂): 6 bar ±10% - Vacuum (VAC): -0.8 bar ±0.1% - DIW (Deionized Water): — bar Compliance: CE Marked Find more here - / Contact us at -

x-axis: 4000 mm y-axis: 3200 mm z-axis: 1200 mm distance between columns: 2700 mm spindle motor: 50 / 65 kW spindle turning speed range: 15000 U/min distance spindle nose and table: 200 - 1400 mm rapid traverse: m/min table-size: 4020 x 2400 mm workpiece weight: 15 t Control: Heidenhain TNC 640 total power requirement: - kW weight of the machine ca.: 44 t dimensions of the machine ca.: - m Machine equipped with: X, Y, Z, B, C five axes simultaneous movement control - CNC control Heidenhain TNC 640 - 40-position tool changer (HSK-A100) - 2-axis milling head TCH-19F -- B- & C-Axis - X,Y,Z-axis linear scales - IKZ 20bar - Tool off-set - Oil skimmer - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.