130,800 used machines on RESALE, but how to find them? Machine Search
Key data: 4 Meter, 13 t
Machine Type: Plasma Inverter Cutting Machine Make Hypertherm Type Powermax 30 AIR Serial No. 033.100 Connection voltage 1 x 230 Volt Adjustment range 15 – 30 amps Duty cycle 20% ED at 30 amps Current adjustment infinitely variable max. cut-off cut for a short time 15 mm at 125 mm/min max. quality cut for a short time 7 mm at 500 mm/min Cooling inverter through built-in fan Cooling burner compressed air cooled Portable assembly system design Fuse 16 Ampere Optional accessories integrated compressor Dimensions L x W x H 420 x 195 x 330 mm Weight with burner 13 kg Age 4 years Condition workshop tested, very good incl. UVV test report Scope of delivery Plasma cutting system with the following accessories: 1 piece AIR T30 hand cutting torch 4.5 mtr. long 1 piece ground cable 1 Piece Instruction Manual Warranty: 18 months from th ...
Year: 2007 - technically efficient, ready to work – after full service - SV 530 cleaning machine - AKS 1610 welding machine - TBA-F 26/25 cooling station - WT 530 turning station - Welding dimensions: 2300 x 3500 mm - Flash limit: 0.2 – 2 mm - Seal formers
Key data: 4 Meter, 13 t
Machine Type: Plasma Inverter Cutting Machine Make Hypertherm Type Powermax 30 AIR Serial No. 039.660 Connection voltage 1 x 230 Volt Adjustment range 15 – 30 amps Duty cycle 20% ED at 30 amps Current adjustment infinitely variable max. cut-off cut for a short time 15 mm at 125 mm/min max. quality cut for a short time 7 mm at 500 mm/min Cooling inverter through built-in fan Cooling burner compressed air cooled Portable assembly system design Fuse 16 Ampere Optional accessories integrated compressor Dimensions L x W x H 420 x 195 x 330 mm Weight with burner 13 kg Age 3 years Condition workshop tested, very good incl. UVV test report Scope of delivery Plasma cutting system with the following accessories: 1 piece AIR T30 hand cutting torch 4.5 mtr. long 1 piece ground cable 1 Piece Instruction Manual Warranty 24 months from th ...
Labeler Laser System for Bollini Manufacturer: ADE Type PA-100-40-T Year of manufacture 2004 The ADE labeller for Bollini is a technical solution specially designed for the fast and accurate labelling of bottles, cans and other packaging. Ideal for the food and beverage industry, this device helps to optimize work processes and increase efficiency in production. Features of the ADE labeler: High speed, precision, easy operation, versatile application, robust design, energy efficient
- Pressure capacity: 22 t - Projection: 175 mm - Stroke: 120 1/min - Plunger adjustment: 50 mm - Table height adjustment 50 mm - Stroke adjustment: 8-80 mm - Table: 520 x 400 mm - Plunger: 250 x 160 mm - Turnbuckle with trunnion clamping, D35 mm - Motor power 1.5 kW - Very smooth running - Mechanical disengagement of the rotary wedge coupling via pneumatic pneumatic cylinder - Pneumatic foot switch - No UVV - 4 pieces of machine feet - Connection cable CEE plug 16 A - Air connection with quick coupling - Weight: approx. 2,000 kg - Dimensions: Width 820 x Depth 1100 x Height 1800 mm
TECHNICAL DATA:, Shear force��������������������� �������������������� ����������������������� ���������������������� 600 t (2 x 300 t), Height under cutting blade: 600 mm, Shear width��������������������� ������������������ ����������������������� � 800 mm, Cutting blade width��������������������� ����������������������� ����������� 840 mm, Ramming force��������������������� ���������������� ...
A Durmazlar press brake distributed by Knuth is available. Pressing force: 35t, bending length: 1350mm, motor power: 5.5kW, stroke: 100mm, stroke rate: 17/min, max. operating pressure: 240bar, oil capacity: 150l. Machine dimensions X/Y/Z: approx. 1400mm/1400mm/2100mm, weight: approx. 1750kg, operating hours: 1258h. An on-site inspection is possible.
Blackfriars Rotary Cutter / Granulator Model 12 ASHD/267 With sound booth
used
Key data: 650 mm, 600 mm, 620 mm
From a current recycling we offer you a CNC machining center from the manufacturer AVIA, type VMC 650 V. Year of construction:2023 Condition: normal signs of wear Hours: Asking price: VHB Original price: 120.000 € Equipment / accessories / other information: x/y/z 650/600/620mm, Table 800x550mm 30 mm tool magazine Asset Manager: M. Vorkötter Phone: 0202-257273152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location: The sale is without warranty Subject to prior sale
used
Max workpiece size 1030x800x350 mm Table size 950x630 mm Can be inspected under power
For sale is a Artec Spider A high-precision, portable 3D scanner for demanding applications. The scanner is ideal for capturing small to medium-sized objects with complex geometries and fine details., Technical highlights:, - Model: Artec Spider, - Technology: Structured light 3D scanning, - Accuracy: Up to 0.05 mm, - Resolution: Up to 0.1 mm, - Detection range: Precise capture of fine details in complex shapes, - Data format: Compatible with all common 3D CAD and reverse engineering programs, - Connections: USB, Plug & Play, Advantages:, - Very high level of detail for the finest structures, - Fast data capture in real time, - Compact, lightweight design ��� mobile use, - Ideal for quality control, reverse engineering, industrial design, medicine, monument preservation, and much more., Condition:, - Used, good condition, - Fully functional and ready to use, Scope of deliv ...
Key data: 2647 KW, 1000 1/min
Surplus/Never used or installed, High suction pressure compression set unit of 5000 PSI, speed of 1000 RPM, 3550 HP, 10 MMSCFD flow rate. This compressor package consist of: One (1) Caterpillar G3612 LE, one Ariel Compressor JGD/6, Murphy Controls, Cooler and all auxiliary components. This unit was manufactured in 2015, but the project was cancelled. The compressor unit was never used or installed, having undergone a preservation maintenance in 2019. Recently inspected by Enerflex. It was found in excellent conditions!
For sale is a Artec Eva Lite A portable 3D scanner for beginners and professional applications in medicine, education, research, and industrial design. The scanner is the affordable version of the Artec Eva and offers an excellent solution for high-quality 3D scans with ease of use., Technical highlights:, - Model: Artec Eva Lite, - Technology: Handheld structured light 3D scanner, - Accuracy: Up to 0.1 mm, - Resolution: Up to 0.5 mm, - Weight: Only approx. 0.85 kg ��� light and mobile, - Data processing: Generates high-resolution geometry scans (without color capture), - Compatibility: Easy integration with common CAD and 3D software solutions, Advantages:, - Affordable alternative to the Artec Eva, - Ideal for precise 3D scans of medium-sized objects, - Handy, mobile and intuitive to use, - Suitable for medicine, research, prototyping and teaching, - Possibility to upgra ...
Butter Bulk Packer, Model : FMV, Capacity : 5-25 kg, Productivity: 3000 kg per hour max, Tank Silo with screw augers, Twin Screw Augers for butter, Inlet of Product : Window opening or Direct connection from source ( CBM, Butter pump, Silos), Outlet : Butter Bulk Packing in Bag in Box with push off system, Guards : Safety Guards on Filling, Roller Conveyor on to Check Weighing system with roller conveyor, Box Tape Closing Machine, Metal Detector Iq 2 Loma, Check Weighing Device, Capacity: 5-25 kg, Metal Detector: Iq 2 Loma , Tape Box Closer: SIATE , Model: FMV, Cutting Device : Pasilac with Safety Guard , Check Weighing System: Included , Ink Jet Coder: Not Included , Guards: Safety Guards on Filling
The Artec Eva is one of the most popular portable 3D scanners worldwide. Thanks to its combination of high accuracy, ease of use, and fast data acquisition, it is a standard tool in industry, medicine, research, and design., Technical highlights:, - Model: Artec Eva, - Technology: Handheld structured light 3D scanner, - Accuracy: Up to 0.1 mm, - Resolution: Up to 0.2 mm, - Color capture: Full-color 3D scans in real time, - Weight: Only about 0.9 kg ��� light and mobile, - Areas of application: Reverse engineering, quality control, medicine, cultural heritage, prototyping, and much more., Advantages:, - Combination of geometry and color capture, - Fast, markerless data acquisition in real time, - Compatible with CAD and 3D software solutions, - Globally proven and reliable system, - Intuitive operation - also suitable for beginners, Condition:, - Used, well-maintained, and ...
For sale is a Artec Eva Lite A portable 3D scanner for beginners and professional applications in medicine, education, research, and industrial design. The scanner is the affordable version of the Artec Eva and offers an excellent solution for high-quality 3D scans with ease of use., Technical highlights:, - Model: Artec Eva Lite, - Technology: Handheld structured light 3D scanner, - Accuracy: Up to 0.1 mm, - Resolution: Up to 0.5 mm, - Weight: Only approx. 0.85 kg ��� light and mobile, - Data processing: Generates high-resolution geometry scans (without color capture), - Compatibility: Easy integration with common CAD and 3D software solutions, Advantages:, - Affordable alternative to the Artec Eva, - Ideal for precise 3D scans of medium-sized objects, - Handy, mobile and intuitive to use, - Suitable for medicine, research, prototyping and teaching, - Possibility to upgra ...
: 34 mm : 40 mm : 40 mm : MK 4 : 100-1.800 U/min. throat: 300 mm : 615x430 mm : 2 x 14 x 224 mm : 138/688 mm column diameter: 145 mm spindle stroke: 160 mm feeds: 0,1-0,2-0,3-0,4 mm/U Machine height: 1865 mm total power requirement: 1,4/2,2 kW Standard equipment: - Electromagnetic feed clutch with overload protection and electrical Cross Handle Switches - Main switch lockable - Motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel - Speed adjustment stepless - Speed display digital - Protection class IP 54 - Motor insulation class F - Spindle protection with electrical protection Pos. 20.1 Tapping device with foot switch, for thread cutting with Stop, max. 6 threads/min., (Tapping power dependent on spindle speed) Pos. 25. Coolant device B, consisting of: separate container (33 l), pump with Motor protection switch, complete fitting The data for ...
Mefiag Satilum filter system Long Life Unit 3x with control system
Technical Conditions - Application: Outdoor, temperature range –10°C to +40°C, weather-protected - Operation: 8 hrs/day, 1-shift (06:00–18:00) - Material: Pre-sorted KVA (waste incineration slag), 0–500 mm, mixed with wood, plastics, metals, dry - Capacity: ~5 t/h (max. 10,000 t/year) - Foundation: Concrete floor with steel structure Main Components - Feed Bunker with Vibrating Feeder (SFLU 800-2505000) - Input: KVA slag, up to 500 mm - Capacity: 5.0 t/h - Wear-resistant lining (similar to Hardox 400) - Weight: ~5,000 kg - Belt Conveyor FB 1,000 RB (3,000 mm) - Incl. magnetic separator integration - Permanent Overband Magnet Separator (IMP Z-120) - Removes ferrous metals - Sorting Belt Conveyor FB 1,000 RB (6,500 mm) - With hand-sorting section - Belt Conveyor FB 1,000 RB (4,000 mm, swivel type) - Swivelling discharge, manual adjustment - Steel Sorting Platform / Wal ...
pressure: 100 t throat: 375 mm stroke: 20-125 mm no. of strokes: 60 Hub/min ram - range of adjustment: 80 mm table surface area: 920x660 mm ram surface: 700x450 mm hole in the table: Ø90 mm tool hole in ram: Ø50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: 2100x1500x3300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used manual batch ultrafiltration line for cottage cheese made by Agros Milko-Polska. Capacity: 2.500 kg of finished product in 8 hours, concentrated to 72% dry matter. New: 1996
MITUTOYO Crysta Apex CRT-A910 coordinate measuring machine was built in Japan by Mitutoyo Corporation. This extremely advanced machine, characterised by the highest accuracy and objectivity, is used for highly accurate workpiece measurements. Workpiece measurements are performed using the contact or non-contact method, which are then represented as a set of coordinate points. The use of this method makes it possible to measure parts with very complex shapes, which cannot be measured with ordinary measuring instruments. The MITUTOYO Crysta Apex CMM measuring machine is offered with a PC with software. Technical specifications of the MITUTOYO Crysta Apex CRT-A910 measuring machine - measuring range in the X/Y/Z axis: 900/1000/800 mm - measuring resolution: 0.1 µm - measuring speed: 300 mm/s - PC with software - compressed air pressure: 0.4 MPa - compressed air consumption: 50 l/m ...
used
ROBOTS FOR HIGH PRESURE DEMOLITION PUMPS IN GREAT CONDITION. ROBOT CONJET 363, 322 , AND JETFRAME SYSTEMS 102
Fanuc FANUC SPINDLE AMP A06B-6088-H226#H500
MCA automatic capping machine with false capping detector Running Direction: Right-Left Adelski Pv 6541/1/210 AVM2104 Capacity: 10,000 bottles/hour Format parts1l/0.75l Schlegel/Bordeaux Burgundy/0.25l/0.5l
Used double-decker ant in regular use until 2022, stored in working condition in 2022; complete incl. charger; Sold as hobbyist equipment, spare parts carrier due to the long service life.
MANUFACTURER: APV GAULIN MC 45 MILK HOMOGENISER TYPE: 5283 MC45-2,5 TPS CAPACITY: 20.000 l/h PRESSURE: 175 BAR 2 STAGES PRESSURE CONTROL: HYDROULIC CONTROL NUMBER OF PISTONS: 3 MOTOR 90 KW
Carnaghi ABH 1550 - Ø1600 mm Chuck dia.: 1200 mm Max turningdia -- passage: 1400 mm Max hight of workpiece Z-axis: 1000 mm Command: E.C.S CNC 1400 TOOLING: yes Turret: yes Qty Tools: 7 Coolant pump: yes
gasleiding: Ø50 x 3,91 mm stalen buis: Ø60 x 3 mm roestvrijstalen buis: Ø60 x 2 mm koper/alu buis: Ø64 x 4 mm massieve staaf: Ø35 mm massieve rechthoekige staaf: 60 x 10 mm vlakke staaf (hard): 60 x 16 mm platte staaf (gemakkelijk): 60 x 30 mm doosdoorsnede: 60 x 30 x 4 mm maximale straal: 200 mm buigsnelheid: 1,25 amp; 2,5 rpm video klik hier Length: 900 mm Depth: 400 mm Height: 1100 mm Weight: 140 kg
Manufacturer: Cleco / Apex Tool Group Type: TSE 961446PT Voltage: 380 V DC Current: 2-10 A DC Operating temperature: -20 to +70 °C Humidity: 0-90% without condensation You can also find the corresponding screw control in our shop!
Ref. No. 00891 Name of the Tube Laser Cutting System Manufacturer: BLM Adige Model LT 652/B Year of construction 2002 Laser power 2000 watts Loading length Unloading length Loading length 6500mm and unloading length 3500mm. In 2024, 40,000 euros were invested Operating hours 3 shifts Computer 127,653h Heating HF tube 62.850 h High voltage 119,453 h From order confirmation at the time of purchase Lasertube LT652 Automatic feeder for pipes between 3200 and 6500mm Fully automatic pipe support and unloading device for pipes up to 4500mm Siemens Sinumerik 840D control system Teleservice incl. modem CO2-Slab-Laser Model DC020 Kompakt, Fabr. Rofin Sinar Hamburg Integration RF DC020 Compact Laser Cooling Unit Fine dust filter, Fabr. Donaldson Torit Universal AK-HP Cutting Head, Fabr. Precitec Gaggenau Precitec Interchangeable Cassettes AK-HP 5" HP ZNSE 5" ...
- Double hoist 60 + 60 Ton - Lifting class H2 - Freqence vario speeds - Hoist ABUS GM 7600U6 - FEM Group 1Am - Ikusi remote (TM70 2.13) - Little used / Under power / Direct availebel
CONTROLS conventional PRESS DESIGN drive system: eccentric / crank frame design: C-frame, single sided PRESS FORCES total force (nominal): 100 to SLIDE slide force: 100 to stroke rate (max.): 72 /min SLIDE (MECHAN. PRESS) slide adjustment: 80 mm stroke adjustment: yes stroke min.: 8 mm stroke max.: 112 mm TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 407 mm ATTACHMENTS (PRESSES) 2-hand engagement: yes for safe tools only
Arburg 270 S 250-60 (2004) Clamping Force: 25 t Tie Bar Spacing: 270 mm × 270 mm Platen Dimensions: 400 mm × 400 mm Max. Mold Opening Stroke: 275 mm Min. Mold Height: 198 mm Max. Daylight: 279 mm Ejector Stroke: 95 mm Mold Opening Force (Max.): 14 kN Machine Dimensions (W × D): 1250 mm × 3800 mm Machine Weight: Approximately 1900 kg Screw Diameter: 22 mm Stroke Volume: 39 cm³ Injection Pressure: 1810 bar Injection Flow (2 Pumps): Up to 8.1 cm³/s Material Throughput (PS): Up to 22.0 kg/h Year of Manufacture: 2004 Type: Hydraulic Injection Molding Machine
Copper / Aluminum cable processing line, composed of: MAYPER shredder mill Power: 4 kW Product elevator Useful width: 350 mm Length: 4000 mm GUIDETTI SINCRO 315 compact granulator, for recycling copper or aluminum cables Capacity: 130 kg/h 6.1 kW; 400 V 50 Hz FORNUMAC conveyor belt Useful width: 250 mm Useful length: 1500 mm
Manufacturer: Wurz Energy Year of Manufacture: 2009 Type of Machine : 340 CHP (Combined Heat and Power) Diesel Generator Set Electrical Power: 340 kW each Thermal Power: 346 kW each Engine: SCANIA DC16-RP Control System: SIEMENS / SCANIA CAN BUS Fuel Consumption: up to 245 g/kWh Fuel: palm oil, rapeseed oil, biodiesel, diesel Operating Hours: 10–13 each (maintenance only) Condition: New, unused Container: 20 ft, approx. 9,500 kg each Find more here - / Contact us at -
Stroke: 135mm, max. sheet thickness: 20mm, max. bending length: 3050mm, pressing force: 80t, max. operating pressure: 2975psi, max. die opening: 250mm, bending angle range: 1°-42°, oil capacity: 150L, max. tool weight upper/lower: 40kg/115kg. Machine dimensions X/Y/Z: approx. 4000mm/2050mm/2450mm, weight: approx. 6000kg. Documentation available. An on-site inspection is possible.
From a current recycling we offer you a Holmer implement carrier + slurry technology + beet bunker Terra Variant 585 plus attachments. Year of manufacture: Holmer implement carrier + Zunhammer slurry technology 2019, beet basket 2024 First registration: / Condition: used Hours: approx. 8,459 Asking price: 295.000,00 Euro VHB Original price: 425.000,00 Euro Equipment / accessories / other information: Property will be converted to slurry at short notice Terra Variant 585 (BJ 2019), Slurry technology Zunhammer 21 m³ & Vogesang (BJ 2019), Overload bunker RB 35 (BJ 2024) Asset Manager: Klaudius Giolbas Phone: 0202 257273151 Mail: k.giolbasakf.de We will be happy to provide you with details upon request. Location: 24983 Handewitt The sale is without warranty Subject to prior sale
Manufacturer: Ascojet Model: 2001RX Type: Dry Ice Blasting Machine Operating pressure: up to 10 bar Air consumption: approx. 3–6 m³/min Dry ice consumption: 20–80 kg/h Hours: 481 Condition: used Location: Bremen
Operating pressure: 13bar, volume flow: 17.07m³/min, motor power: 90kW, motor speed: 3480rpm, weight: approx. 1750kg. The frequency converter of the machine is defective. An on-site inspection is possible.
faceplate diameter: 2950 mm swing diameter: 3200 mm turning height: 3500 mm turning speeds: U/min main drive motor: 70 kW Control: FAGOR 8070 workpiece weight max.: 20 t column daylight: 3300 mm milling motor: 16 kW feeds crossrail-slide vertical: 3000 mm/min feeds crossrail-slide horizontal: 3000 mm/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m equipped with: - CNC Control FAGOR 8070 - C-axis (angular positioning of the table) - angular milling Head - Telescopic covers of the cross rail and columns guideways - Chip Conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine name: Packaging machine used (thermoforming line) Manufacturer: Adolf Illig Type: SB 53C - DIN Year of Make: 1990 Drive motor: 1.24 kW Dimensions: L 1,600 x W 1,135 x H 2,710 mm Curb weight: 500 kg Tech. Documentation: Yes Remark: Heating capacity: 4.5 kW (15 ceramic surface emitters) Vacuum system: Degree of vacuum max. 0.95 kp/cm2 Formats: Forming area: 405×500 mm Carton size: 400×495 mm Film width: 445 mm Drawing depth positive: 150 mm Drawing depth negative: 150 mm Packaging height: 150 mm Film roll diameter: 400 mm (blister) Film roll diameter: 350 mm (Skin) Film roll core diameter: 70 mm Condition: Used Price: On request
Presse à injecter ARBURG 100 T type 420C 1000-250 Année de fabrication : 1999 En bon état de fonctionnement Pompe neuve Force de fermeture : 1000 KN / 100 T Diamètre vis : 40 mm Volume injectable : 188 cm3 Pression d’injection : 1530 bars Rapport L/D : 18 Ouverture max des plateaux : 750 mm Epaisseur min moule : 250 mm Dimensions des plateaux : 570 x 570 mm Entre colonnes : 420 x 420 mm Dimensions : 4,15 x 1,60 x 2,02 m
Amsonic Hamo ECS40 Closed circuit cleaning system. Hydrocarbon-based solvent as cleaning medium Medium is distilled internally so that high medium quality is always available Process: Spraying, steam, flooding, oscillating, rotating, ultrasonic, vacuum drying. In any order and intensity.
- Head Pick up Station - CNC Indexing Micro Head 0.001 Gr - Spindle extionsion - Internal coolant system - ATC Chain Tool changer 60 Positions - Under power
maximum number of results exceeded
please refine your search
