tetra pak a used for sale

NEW,

Manufacturer: Automatex Model: CBF Year of Manufacture: 2008 Technical Specifications: - Working width: 2.500 mm - RPM: 1200 - Needle Density: 2x 460 N/m - Needles: 5000 N/m - Stroke: 60 mm - Needle boards: 1 set (two boards) Find more here - / Contact us at -

Rated load capacity: 5t, clamp pressure/working pressure: 18/16MPa, front overhang: 575mm, center of gravity Px/Py: 480/810mm, weight: 2.1t. An inspection on site is possible.

Power supply: 400V 50Hz 3N Main Material Stainless steel, acid-resistant Work belt width 400 mm Strap type made of acid-resistant steel

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

voltage: 20-250 VAC V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height 1230 mm Width 980 mm Length 1330 mm Weight 820 kg Power supply: 400V 50Hz 3N Total power 31.1 kW Description Screw compressor Atmos SE 270, 400 V, 31.1 kW 8 bar 4.47 m3/min

ID3460 STS Scheltzke RS3000 E-FU-AUT year/Baujahr 2015 850 kg Stirring station, electric drive 3.0 KW Stirring station, electric drive 3.0 KW

Key data: 160 mm, 2 kW, 1770 m³/h

mobile chip extraction system AL-KO FMRG 1/160 Manufacturer Part Number: 4172370/2

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1300 mm, 117 , 35

Producent: Arburg Typ: 470 S 1300 - 350 Rok produkcji: 1999 Sterowanie: Selogica Typ zamknięcia: Hydrauliczny Siła zamykania: 1300 kN Rozstaw prętów: 470 mm x 470 mm Rozmiar płyty: 650 mm x 650 mm Wysokość narzędzia: min 275 mm Odległość otwarcia: 575 mm Maksymalna odległość między płytami: 850 mm Śruba: 35 mm Objętość skoku: 139 ccm / 117 gram PS Ciśnienie wtrysku: 2500 bar Ogólne Silnik: 22 kW Ogrzewanie: 8,8 kW Wymiary: 4,5 m x 1,6 m x 2 waga: 5100 kg Tekst na ekranie: niemiecki Dodatkowe wyposażenie/wyposażenie Rdzeń ciągnący: x1 Euromap Gorące strefy

Manufacturer: Arburg Type: 320 S 500 - 150 Year of production: 2000 Controls: Selogica Closure Type: Hydraulic Clamping force: 500 kN Bar spacing: 320 mm x 320 mm Plate Size: 498mm x 498mm Tool height: min 225 mm Opening Distance: 350mm Maximum distance between plates: 575 mm Screw: 35mm Stroke volume: 106 ccm / 89 gram PS Injection pressure: 1610 bar General Motor: 15kw Heating: 4.8 kW Dimensions: 3.7 m x 1.2 m x 1.8 m weight: 2250 kg On-screen text: German Additional equipment: Core String: x1 Euromap

Sliding table saw Altendorf Type F90 Machine No. 66-9-135 Sliding carriage length 2200 mm Cutting width 800 mm Motor power 5.5 kW Flat belt drive, 2 speeds Cutting width to the right of the saw blade 800 mm max. saw blade diameter without splitting wedge 500 mm Cutting height maximum 165 mm Maximum saw blade diameter with splitting wedge 400 mm Information on the cutting height for saw blade diameter Saw blade diameter 250 mm Cutting height 0 - 55 mm Saw blade diameter 300 mm Cutting height 0 - 80 mm Saw blade diameter 350 mm Cutting height 25 - 105 mm Saw blade diameter 400 mm Cutting height 50 - 130 mm Saw blade bore 30 mm Saw blade cannot be swivelled Extraction connection diameter 120 mm + 80 mm Packaging dimensions approx. 2200 mm x 1400 mm x H 1500 mm Weight approx. 855 kg

Refer to code 1063-1064-1067 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

The PULVIS is an energy-optimised grinding system for ultra-fine materials. The vertical, dry agitator bead mill features an integrated dynamic classifier. Its strength is the ultrafine and low contamination grinding of hard materials. Used on alumina powder Al2O3 only a dozen of times. ALREADY packed in Boxes The Hosokawa Alpine Pulvis is a high-energy impact mill designed for the dry grinding of powders in the size range of d50 = 5 to 150 µm. It utilizes a combination of high-speed impact and shearing forces to achieve size reduction of various materials. This type of mill is commonly used in industries such as pharmaceuticals, chemicals, minerals, and others where fine and ultrafine particle sizes are required. The Pulvis mill typically features a cylindrical grinding chamber with a rotor assembly containing grinding elements such as hammers or pins. Material is fed into the mill  ...

Manufacturer: Year of Manufacture: Model: WN29/ WPC-ELT-001-0248 Type of Machine: 400 Ton Hydraulic Press - Press Model: 225.400 - Weight (Net): 75,000 Kg - Maximum Force: 4000 KN - Nominal Distance from Bottom Dead Center: 12 mm - Normal Stop Position of Crankshaft: Top Dead Center Tooling and Capacity: - Maximum Tool Dimensions (Height x Width x Depth): 700 x 2500 x 160 mm - Maximum Weight of Upper Tools: 7000 Kg - Maximum Permissible Flywheel Speed: 489 RPM Operational Parameters: - Continuous Stroke Rate (Min/Max): 12 - 30 Strokes/Min - Maximum Clutch Engagements per Minute: 20 Strokes/Min - Maximum Effective Clutch Engagements per Minute: 10 Strokes/Min - Stroke Range (Min/Max): 200 mm - Slider Adjustment Stroke: 300 mm - Maximum Tool Speed (Adjustable Stroke): 700 mm Power and Pneumatics: - Electrical Supply (Voltage/Frequency): 400V / 50Hz - Installed Electrical Power: 4 ...

We are offering for sale an Automatic Powder Coating Line with full encapsulation of the production process manufactured by Ecoline. Elements included in the line: - Surface preparation tunnel - Drying oven - Cooling tunnel after drying - Manual cabin for short series - Dielectric automatic cabin for quick color change - GEMA applications - Cleanroom to maintain constant operating parameters throughout the year (temperature and humidity) - Polymerization oven - Cooling tunnel after firing - Automatic mono rotary conveyor Additional Information: - 3-zone tunnel entirely made of stainless steel. The first section is heated by an external exchanger and equipped with a coalescing oil separator and bag filtration. Additional equipment includes an automatic chemical dosing system from Endress Hauser. - Drying oven with very good insulation with air curtains and hoods at the exit with temp ...

D'Andrea TA120 Plan Boring Head SK40 S20x2 Cover Fp1 Fp2 Boring Tool Total weight 16.6 kg Lots of accessories, see pictures. Very good used condition. In original wooden crate

Inv. Num. : 8203 Type: ALPHA 2800 XS Producer: Harrison Created: 2011 Parameters: Control system: FANUC Maximum turning length: 2000 mm Maximum turning diameter over bed: 800 mm Maximum turning diameter over support: 710 mm Maximum spindle speed: 1400 1/min Spindle bore: 125 mm Weight: 7500 kg

X-Hub 4000mm Y-Hub 900mm Z-Hub 950mm Weight: 18.500kg Headstock Range: 100 – 12,000 rpm Spindle design: SK40 Tool Stations: 66pcs. Control Type: iTNC530 Release date

Flat Scissors Lift Table Jungheinrich Ant Euro Pallet SLT Electric Hydraulic Top condition, full function. Safety shutdown works. Function see video Total weight approx. 235 kg. Of which the control unit weighs approx. 20 kg. Power connection 380 volts, 16 A. Lifting time approx. 18 seconds. Max. lifting weight 1000kg From the dissolution of the company. Was treated with care Within a radius of 200 km, a delivery before the purchase can be considered to give reimbursement of expenses. The eventual delivery is made on Euro pallets, unloaded with a lifting platform. No need for a forklift on site.

Key data: 2300 mm, 1200 mm, 700 mm

Weight: 22.000kg Headstock Range: 30 – 7500 rpm Spindle design: SK50 Tool Stations: 60pcs. Control Type: iTNC530 Release date : 20

Key data: 6800 mm, 1400 mm, 650 mm

Five-axis CNC for staircase construction Timber construction with vacuum pump Treversening table Two 12-fold tool changers and 2 additional places for saw blades up to 450mm diameter

max. format 49 x 65 cm Year of construction 2000 Flat pile feeder with suction head 4 fold pockets in the parallel fold section 1 folding blade in the cross-fold section 1 more fold pocket after the 1st cross break Shed display Price on request. We supply and install worldwide.

Dough dividing and rounding machine Bun press Fortuna Automat Gr. 3+ with active shutdown Head cleaning to the back Partial head reworked with stainless steel knife NEW Dough insert up to 2400g depending on TA Dough Dividers 30 Pieces/Piece with rewind button E-system NEW DGUV V3 tested Connection 400V, 1.6 kW, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm Used machine overhauled Option: Stainless steel pedestal Wirkteller Neu Service Package Maintenance contract Instruction & Commissioning Delivery With us you will find one of the largest selection of bun presses!

Dough dividing and rounding machine Bun press Fortuna Automat Size 4 H with active shutdown Head cleaning with hand crank Parting head newly revised 30-piece with stainless steel knife NEW Dough insert 1200 to 3600 g, Unit weight from 40 to 120 g E-system NEW DGUV V3 tested with rewind button Connection 400V, 16A-CEE plug Approx. dimensions: 710 x 730 x 1500 mm WxDxH Used machine overhauled Option: Stainless steel pedestal New Acting Plate Maintenance contract Service Package Instruction & Commissioning Delivery Come to our large bakery equipment exhibition!

Lifting kneader extendable Kemper Model: F 100 ASL for max. 160 kg dough/TA 160 (rye mixed bread dough) Stainless steel kettle 240 litres Dough machine with flour dust hood according to HACCP 2 tank cars Stainless steel kneading arm 2 gears, with protection circuit with timer DGUV V3 tested Connection 400V, 16A-CEE plug Used machine overhauled with 6 months warranty + Spare parts service Option: Delivery & Floor Fastening Maintenance contract E-Box Service Package Instruction & Commissioning Many more lifting kneaders in stock!

Connecting rods Jenbacher Series 4 Article number 9036319 20x in stock

One-way operation: Length A 100 mm - 1240 mm Width W 80 mm - 1400 mm Length of window/lining C 60 mm - 720 mm Width of window / lining D 30 mm - 1140 mm Two-lane operation: Length A 100 mm - 1180 mm Width W 80 mm - 660 mm Length of window/lining C 60 mm - 720 mm Width window / lining D 30 mm - 530 mm

sheet width: 3050 mm plate thickness: 12 mm distance between columns: 3100 mm table height over floor: 900 mm cutting angle adjustment: 0,5 - 3 ° no. of strokes: 6 - 13 Hub/min back stop - adjustable: 1000 mm down holder: 18 St oil volume: 350 l total power requirement: 22,5 kW weight of the machine ca.: 8 t dimensions of machine L x W x H: 3,96 x 2,10 x 2,22 m - with adjustment of cutting gap - Accessories: electr. back gauge, spare knives The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MJ UNI-MEER Pieces: 13 Material: V2A (AISI 304) 1.4301 Manufacturer: Bolzwangen-Allgäu Design: horizontal Last Use: Food Length: 3300 mm Cylinder length: 2500 mm Inner diameter: 1600 mm Surface inside: 2B=IIIC ground Outer surface: marbled front Description: Tank crest: Airlock DN50 Front: Clapper bottom Level indicator with bar and scale Manhole 350x450 mm Nozzle Flap Size 37 DN100 forward-drawn residual drain pipe with DN32 angled seat valve Important: Tanks are without a base. On request base or feet in V2A - for an extra charge.

Second-Hand Butter Production and Packaging Machinery Complete butter production and packaging equipment suitable for industrial dairy processing. The system includes a continuous butter machine, forming and filling equipment, and packaging units, providing an efficient solution for butter production and portion packaging. General Information - Year of Manufacturing: 2008 - Condition: Good used condition - Continuous Butter Machine - High-performance continuous butter production unit designed for reliable processing in dairy plants. - Manufacturer: AHLBORN - Model: 311/1000 - Capacity: 1000 kg/hr Maintenance History - Gear system completely revised in 2018 – hardened gears installed - Exit stars completely replaced in 2020 Output Configuration - Exit tube: 250 g - Exit tube: 25 blocks Rotary Forming and Filling Machine - Automated system for butter portion fo ...

bore capacity in steel (diameter): 50 mm throat: 385 mm bore stroke: 240 mm table surface area: ø 500 mm spindle taper MT: 5 spindle turning speed range: 40 - 800 U/min feeds: 0,1/0,14/0,2/0,28/0,4 mm/U column diameter: 220 mm distance between table/spindle: max. 670 mm distance spindle/base plate: 1180 mm total power requirement: 4 kW weight of the machine ca.: 1,4 t dimensions of machine L x W x H: 1,5 x 0,75 x 2,4 m Accessories: drill chuck, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Tubular UHT Plant – Alfa Laval M10-MFMC (6,500–13,000 l/h) Industrial tubular UHT processing plant designed for the thermal treatment of dairy products such as UHT milk and UHT cream. The Alfa Laval tubular UHT system provides reliable sterilization and continuous processing suitable for medium to high-capacity dairy production. General Information - Manufacturer: Alfa Laval - Sterile Tube Type: M10-MFMC - Year of Manufacture: 1989 - Condition: Good used condition, serviced Technical Specifications - Production Capacity: 6,500 – 13,000 l/h - Maximum Temperature: 137 °C - PLC System: SIEMENS S5 Recent Area of Use - The plant has recently been used for processing: - UHT milk - UHT cream Key Advantages - Reliable Alfa Laval tubular UHT technology - Suitable for continuous sterilization of dairy products - Flexible capacity range 6,500–13,000 l/h -  ...

bore diameter: 65 mm throat: 380 mm Control: PLC-Steuerung bore spindle turning speed range: 63 - 1600 U/min table-size: 630 x 500 mm rapid traverse Z-axis: 4,75 m/min boring feeds:: 0,05 - 0,56 mm/U total power requirement: 9 kW weight of the machine ca.: 2,0 t dimensions of the machine ca.: 1,50 x 1,20 x 2,95 m Drilling capacity in steel ST60: 65 mm Drilling capacity in cast iron GG20: 80 mm Thread cutting ST60: M68 Thread cutting GG M72 SPS-controlled automatic drilling machine with Drilling/deep hole drilling/thread cutting Sequence: 1st rapid traverse to start position 2. switch on the speed 3. switch on the drilling feed 4. drilling until the drilling depth is reached 5. return in rapid traverse to start position Manual operation possible (speed and direction of rotation, rapid traverse positioning, Switching the drill feed on/off) Selection of the drill feeds and spindle speed man ...

Used Helix Accumulator – for Tetra Pak Packages, Glass and PET Bottles Reliable Helix accumulator system designed to buffer and accumulate containers in high-speed beverage and packaging lines. The unit is suitable for handling Tetra Pak packages, glass bottles, and PET bottles, ensuring smooth product flow and reducing line stoppages. General Information - Machine Type: Helix Accumulator - Application: Accumulation and buffering of containers in production lines - Condition: Used Technical Specifications - Accumulation Length: 131 m - Accumulation Length Without Extension: 85 m - Maximum Package / Bottle Height: 171 mm Equipment Features - Includes: Rubber tops for gentle product handling - Designed for Tetra Pak packages, glass bottles, and PET bottles Key Advantages - Efficient container accumulation and buffering - Suitable for Tetra Pak cartons, PET bottle ...

x-travel: 1600 mm y-travel: 920 mm z-travel: 900 mm table surface area: 1800x700 mm T-slot - distance: 120 mm Table load: 3000 kg spindle taper ISO: 50 power capacity: 22/30 kW spindle turning speed range: 60-3000 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m About usmore than 400 machines in the warehouse over 12000 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: - plate thickness: - plate length: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: - plate thickness: - plate length: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0400 mm : 1250 mm : : 200 mm : 55 mm : 315 mm : 2700 U/min : D1-6 DIN 55029 : 73 mm : 140 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 235 mm dimensions of saw-band: 2480 x 27 x 0,9 mm cutting width: 280 x 190 mm cutting speed: 45/90 m/min : 120 mm : 120 mm : 190 mm Impact energy: 170 mm connected load frequency: 400 Volt total power requirement: 1,1 kW weight of the machine ca.: 290 Kg dimensions: 1,2 x 0,8 x 1,2 m Double miter band saw -Miter cuts up to 60° left and 45° right -Vice with quick clamping device -Band tension control -Electr. Automatic cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AKR-KNOCK CONTROL RS - 12404594

AKR-KNOCK CONTROL RS - 12473957