tetra pak a used for sale

Complete Britas filter with many spare parts. Off site, available immediately.

sheet width: 2100 mm plate thickness: 40 mm pre-bending: 30 mm upper roll diameter: 390 mm lower roll diameter: 360 mm side roll diameter: 300 mm total power requirement: 22 kW machine weight ab.: 17200 kg Overall size: 5060 x 2200 x 2180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 318 t, 318

Parotec Face Plate Pallet PowerGrip 160 Stitch Partool Zero Point Clamping System Face plate custom-made by a sister company von Schunk. Such a face plate for the Parotec is not available for sale. Very good used condition. Various milling on the top, see pictures the dimensions can be found in the pictures. Weight approx. 50kg. There are other Parotec accessories in stock Other used interchangeable plates, a steel groove plate, You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.

IDM edgebander model ACTIVA GP-R2: – MAGELIS electronic control with video – usable panel thickness from 10 to 60 mm – thickness of edges in rolls from 0.4 to 3 mm – Thickness of solid edges up to 12 mm – 2 feed speeds 12-18 mt/min – upper presser with wheels – motorized adjustment of the upper presser – machine according to CE regulations, year 2004 Operating units: – grinding unit with 2 motors – anti-adhesive unit, with nozzles for liquid – IR lamp for panel preheating – gluing unit with glue tank and upper pre-melter (3 interchangeable glue tanks are supplied) – double tilting trimmers – tilting trimmers – 2-motor rounding unit – PVC/ABS edge scraper unit – glue scraper unit – brush unit

Column Drill Type: AX3S Year of Make: 1985 Condition: very good, fully functional Sale is made according to the posted photos. Without a vice! Delivery for an extra charge by freight forwarder !

Key data: 630 mm, 560 mm, 560 mm

Machine Details Stock-No. 1105-04038 Type of machine Universal Milling Machine Make DECKEL-MAHO Type DMU 60 MONOBLOCK Year of manufacture 2008 Type of control CNC Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight basis EX WORK Technical details X-Travel 630 mm Y-Travel 560 mm Additional information CNC Univ. Tool Milling Machine DECKEL MAHO Model DMU 60 MONOBLOCK YEAR OF MANUFACTURE 2008 5 AXIS SIMULTAN CNC Universal Tool Room Milling Machine DECKEL MAHO type DMU 60 MONOBLOCK BUILT IN 2008 With CNC control Heidenhain TNC 530, 32-fold tool changer, ROUND TABLE 360000 ° , Cabin With CNC control Heidenhain TNC 530 , 33-fold automatic tool changer, , cabinl Technische Daten / technical details: Longitudinal travel X / X-travel longitudinal 730 mm Cross travel Y / Y-travel cross 560 mm Vertical travel Z / Z-travel vertica ...

Used Alfa Laval Clara 20 HF - LAPX404 SGP centrifuge. New: 2014 Condition: very good Complete technical documentation Worked in food standard (vegetable proteins) Worked 328 h

Key data: 4300 mm, 2200 mm

EXHIBITION MACHINE Cutting height 2200 x cutting length 4300 mm, cutting depth 80 mm Motor power: 5.5 kW Automatic saw feed for vertical and horizontal cut, infinitely variable from 6-25 m/min. incl. the following accessories: - Suction CE - Pneumatic aluminium sliding shelf - Medium workpiece support - Longitudinal fence with digital dimension display - Stripe stop - Digital dimension display for horizontal cutting on the control panel - 3 adjustable anchorage points in the saw bar - SuperCut scoring device incl. 2 WPL knives - Narrow parts line (2 pieces)

Key data: 110 mm, 1 , 160 mm

Specifications: max. working width: 1100 mm, min./max. workpiece thickness: 3 / 160 mm Sanding belt dimensions: 2150 x 1120 mm, sanding belt speed: 18 m/sec. Feed speeds: 4 + 8 m/min. Motor power grinding agregate: 11 kW, power adjustment: 0.55 kW, feed carpet: 1.3/1.8 kW Operating pressure: 6 bar, Air requirement: 10 l/min., Suction nozzle: 1 x 150 + 1 x 120 mm WxDxH: 1800 x 2000 x 2100 mm, weight approx. 2400 kg Standard equipment: - Contact roller D=150 mm, hardness 90° Shore - Air sanding shoe with automatic insertion and removal - Rigid sanding shoe for solid wood frame sanding - Brush roller driven by the grinding unit - Automatic centering of the feed carpet - Extension carpet with high quality rubber circular hole carpet and auto. Carpet centering - Pneumatic sanding belt tension with length compensation - Non-contact abrasive belt oscillation, electronic - Low ...

Key data: 4 mm, 40 mm

Edge banding machine with joining milling machine (incl. DIA tool), with PLC control (incl. touchscreen) with hot-melt adhesive specification on the workpiece for edge material up to 3 mm: maintenance-free, coated glue basin with alternating tank preparation, HF cross-cut sawing station (approx. 16,000 rpm) for front and rear edge protrusion, HF milling station (approx. 16,000 rpm)with interchangeable plate milling cutter (combination design), Fine adjustment of the milling machine from the operator's side (Hebrock system), Corner round milling machine (minimum workpiece length 300 mm, Hoa0Tgpbz max. workpiece thickness 40mm), surface scraper blade incl. pneumatic excavation, robust chain drive, Double roller top pressure, aggregate viewing window of Machine rear and operator side, extendable Workpiece support, feed rate approx. 10 m/min., workpiece thickness 60 mm, incl. 1x al ...

Used Depalletizer New Glass New Glass Depalletizer with Bottle Transport, Discharge Conveyor, Intermediate Layer Collector Used new glass depalletiser depalletizer, buffer glass bottle table conveyor, automatic layer depalletiser, inflatable tubes

Weber ASC 560 in absolute top condition

Key data: 1100 mm, 1 , 150 mm

Combination grinding unit with contact roller and air grinding shoe Brush roller Abrasive belt tension, pneumatic motor strength adjustment Specifications: max. working width 1100 mm Max. workpiece thickness 150 mm Min. workpiece thickness 3 mm Sanding belt dimensions 1900 x 1120 mm Feed speed 5/10 m/min. Motor power grinding unit 15 kW Motor power height adjustment 0.50 kW Motor power feed carpet 0.5/1.0kW Operating pressure 6 bar Air pressure approx. 20 l/min Suction nozzle 2 x 200 mm Weight approx. 2100 kg Machine width approx. 1750 mm Cntaou7R Machine depth approx. 1700 mm Machine height approx. 1900 mm

Horizontal drilling rig, manufacturer: DITCH WITCH, type: AT 40 All Terrain, year of construction: 2018, read operating hours (h): 2,898, serial no.: DWPAT40XHK0000065, with rod box, drill pipe, without drill heads, diagnostic screen with approx. 12 error messages (including AdBlue malfunctions), engine no.: 707 3399, 4-cylinder diesel engine, 119 kW, thrust JT/AT 178 kN, extendable cab with heating and air conditioning, flushing high-pressure pump, electric shock protection system, hydr. Crusher, remote control with remote shutdown function, Commander 7 controller with locating system

BLM-ADIGE JUMBO LT14 tube laser cutting machine was built in 2014 in Italy by BLM S.p.A. The machine’s high versatility and extensive machining capabilities make it the perfect choice for precision machining of tubes, open profiles, I-beams and special profiles of large dimensions. It will significantly reduce the cost of producing a single component and improve the quality of cutting compared to other technologies available on the market. The BLM-ADIGE LT JUMBO 14 3D tube laser cutting machine performs machining fully automatically, without the need for retooling or manual adjustments. Once the workpieces have been fed in, the loading unit with conveyor system segregates them according to cross-section, diameter and length. The workpiece is then moved towards the work area, where it is held by three special spindles that eliminate uncontrolled movements and guarantee more precise,  ...

Key data: 1300 mm, 4 , 150 mm

WIDE BELT GRINDING AND CALIBRATION MACHINE Technical details: Working width: 1300 mm Max. workpiece thickness: 150 - . 4.0 mm Sanding belt dimensions: Circumferential mm Machine dimensions LxWxH: 4.8 x 2.7 x 2.35 m Drive 219 kW Year of construction 1992/2004 For woodworking! Other features: - Pneumatic belt guide - Height adjustment by handwheel - EMERGENCY STOP switch - Grinding roller adjustment - Belt tensioner - Roller conveyors (infeed and outfeed per L: 2800 x W: 1700 mm with 6 rollers each) motor-driven - Control panel operation - Workpiece thickness min./max.: 4.0/150mm - Sanding belt belt width 1300 mm (belt circulation) - Sanding belt support lengthxwidth: 1700/1350 mm

A refurbished Aerzen screw compressor type: VM 410 - 2 is offered. All bearings and sealing elements have been renewed. This is the compressor stage.

Connected load 380V 3.5A Pneumatic connection 8 bar Total height 3600 mm Overall length 4400 mm 1x fixed stop 2x pressure beams - can be clamped over rack 2x pressure cylinder stroke 100 mm pneumatically clampable 1x manual control for transverse and longitudinal pressure and loosening presses 1x medium pressure beam 600 mm height (working area) 1x additional longitudinal pressure cylinder 1x slanted window pressing device

Key data: 500 mm, 2850 mm, 3 St.

Power connection 400V 4.0kW Planing width 500 mm Extraction 1x140 mm Stop angle adjustment 3-knife shaft with strip planer blades WxDxH: 2850 x 910 x 940 mm Weight approx. 750 kg Workshop overhauled

Motor power 5.5kW 400V 1240 rpm Boiler 2 pieces à 100 liters Maximum volume flow 850 litres Maximum pressure 10 bar Refrigeration Dryer AD54 No. 17M019986 Motor 0.37kW 230V max. 16 bar input Flow rate 900 litres/min Coolant R13a-0,21kg The compressor and dryer are mounted as a single unit on a steel pan, which can also be used as a pallet with Pallet truck functions (to be transported with pallet truck)

Maximum plate format 1422 x 1804 mm, incl. Automatic Pallet Loader APL 1 segment, inline punch, online processor Glunz & Jensen 165 HDX Immediately available, price ex location on request, delivery worldwide

H.Biaugeaud A404 HB Cheese grater Stainless, previously used for grating cheese, two grating attachments, mobile, 3Ph

Proportional valves Magnetically operated RPE4-103 H11/02400E1

Key data: 84 V

Complete Containerised 2G Agenitor RO4 Biogas Genset Year: 2017 Capacity: 84kW Hours: 318 HZ: 50 V: 400 Scope of supply : Complete Containerised Unit including: Engine, Alternator, Base Frame, Control Panel, Circuit Breaker, Radiator. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

movement of X-axis: 500 mm movement of Y-axis: 350 mm vert. movement Z-axis: 256 mm workpiece weight max.: 800 kg weight of the machine ca.: 4.5 t : +/- 70 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HOMOGENISER Manufacture : APV MANTON GAULIN Model : K3 Capacity : 1200 L/h Bar : 200 bar Stages : 2 Manual Book : Included

BRAND NEW STRAW APPLICATOR FOR SALE Item #: Usm-206 Category Straw Applicator Brand New Straw applicators available for sale Straw type: U Shape and Telescopic Speed: 3000/6000/7500/9000 PLC: Mitsubishi hotmelt: robotech warranty: one year warranty and spare parts set included

Key data: 3000 mm, 3 mm

Max. bending length: 3000 mm Max. sheet thickness: 3 mm steel Manual backgauge Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam variable Bending rail ground Operating instructions Weight: approx. 5,000 kg

grinding length: 4000 mm grinding width: 1100 mm workpiece height: 1100 mm total power requirement: kW weight of the machine ca.: 21 t dimensions of the machine ca.: m Modernisierte Präzisions-Flach-und Führungsbahnschleifmaschine aus Überholungsbetrieb. Geschliffen wurden unter anderem Betten für neue KERN Drehmaschinen. -Digitalanzeigen nachgerüstet -Umbau auf Kugelrollspindeln in der Querachse -Schleifspindel für Umfangsschliff -schwenkbare Schleifspindel für Untergriffe -Originalschabbild in der Längsachse -Elektrik erneuert -Aufspannfläche 4300 x 1500 mm Bei Nutzung einer Grube können wesentlich höhere Werkstücke geschliffen werden! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Body lifting and alignment device Strap belt table with lifting and alignment device Fezer Vacuum Lifter Control: Mitsubishi Melsec Dimensions: 3600 x 1200 x 930 mm More items - new and used - can be found in our shop! International shipping costs on request!

Flake ice maker from AHT with pantry - Coolant R 404A 0.290kg - 220-240V - 50 Hz - 650 watts

Pelletizing Mixing Conditioner Pellet Mill Amandus Kahl Diameter 400 mm, length 2500 mm, stainless steel, as good as new

Working Area: 6000 x 1200 x 3000 (Max Stroke) Max working feed: 8000 mm/min Max rapid feed: 15000 mm/min Fixings: ▪ Indexed head : max rpm: 4000 ▪ Nose: max rpm: 4000 Control: Selca 3045

Bebro Electronic DC CAN alpha 2500145X Motor Controller for Jagenberg Diana Pro. Used, tested.

hydraulic outriggers for loader cranes Stroke 500 mm Stable design with guide via square tube Mechanically telescopic with bolt 300 mm - grid 100 mm Outer square tube 100 x 100 mm Folding device for support cylinder - can also be dismantled Outriggers can be folded down approx. 60° Retracted height 1,000 mm with folding device with integrated load holding valve Removable support plate - size 320 x 250 mm Weight 80 kg / piece - New - unused - 2 pieces in stock - unit price -

Hydraulic cylinder for ATLAS loader crane Stroke 750 mm Piston rod 125 mm Outer diameter cylinder tube 235 mm Piston diameter approx. 200 mm Length retracted center - center bolt 1,100 mm Bolt diameter cylinder tube 80 mm Width of the mount 245 mm Bolt diameter 100 mm Both bolt mounts with plain bearings Spare part number original Atlas 4189526 Width of the piston rod holder 130 mm Weight approx. 330 kg / piece Original price approx. € 9,500,-- -New- - 2 pieces in stock - price per piece -

4 Pieces Leveling Elements - Machine Stand AirLoc Maximum static load 4,000 kg Diameter 205 mm Height 54 mm Thread M 24 x 2 Leveling height 25 mm Weight 4.3 kg - 4 pieces total price -

Leveling Elements - Machine Stand AirLoc - AirLoc PRP - 250 Maximum static load 8,000 kg Diameter 260 mm Height 60 mm Thread M 27 x 2 Leveling height 25 mm Weight 8.6 kg - 20 pieces in stock - unit price -

Offer 24367 Specifications: - Orbital welding machine AXXAIR SALS 150 ( AIR LIQUIDE Prestotig 180 ) - Cooling unit ACW 015 ( SAF Prestocool ) - Circumferential seam welding device AXXAIR CC 220 with motorized concentricity - Raw cutting machine AXXAIR CC 80 -Trolley - Table height 830 mm - Connection 220 V - Space requirement approx. W 1400 x H 1450 x D 1000 mm - Weight approx. 150 kg

Technical data of the pallet rack crossbar: Shelving system: Arestant Type: NS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: orange Box profile: 100 x 50 mm Truss Type: 10515CN Agraffe: 4 HK (hooks) Clear width: 3,300 mm max. load per pair of trusses 1,500 kg, with the same. distributed load. ( Observe field load ) 02x Safety pins, new Design: compl. galvanized For securing the longitudinal members against unintentional lifting General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Precision wedge shoes AirLoc Load capacity 25,000 kg detached Insulating plate and anti-slip plate at the bottom Anti-slip plate on the top Overall height 88 mm in central position Adjustment range 13 mm Size 370 x 230 mm Weight 31.8 kg - New - unused - 21 pieces in stock Unit price

Technical data of the pallet rack crossbar: Shelving system: Arestant Type: NS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: orange Box profile: 100 x 50 mm Truss Type: 10515CN Agraffe: 4 HK (hooks) Clear width: 2,700 mm max. load per pair of trusses 1,500 kg, with the same. distributed load. ( Observe field load ) 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Universal Radius Metal Belt Sanding Machine Specifications: - Sanding belt dimensions 2000 x 75 mm - Surface grinding opening 400 x 75 mm - Support vise – angle adjustable 90° - 30° - Support fine adjustment via handwheels - Sanding belt speed 30 m/sec. - Working height 960 mm - Various sanding rollers Ø 25 , 30 , 39 , 45 , 57 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 125 kg

Heavy Duty Drive Wheels - Drive Wheels with Hub Groove Wheel diameter 350 mm Wheel width 100 mm Elastik - Solid rubber on cast iron - Wheel centre Axle diameter 65 mm Hub groove width 18 mm Hub groove height 5 mm Hub length 100 mm Weight 19.4 kg 20 units in stock - new - unused - -Unit price-

Technical data of the pallet rack crossbar: Shelving system: Arestant Type: NS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: orange Box profile: 100 x 50 mm Truss Type: 10515CN Agraffe: 4 HK (hooks) Clear width: 2,250 mm max. load per pair of trusses 1,500 kg, with the same. distributed load. ( Observe field load ) 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindl ...

Vertical machining center Daewoo (Doosan) ACE VC500 The machine can be seen working in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy, Vertical machining center - 2-pallet, Daewoo ACE VC500, CNC Model Fanuc, CNC version 18-M, Spindle Taper toolholders iso 40, Power spindle 15 Kw, RPM 10000, Number of tools 30, X-axis travel 760 mm, Y-axis travel 510 mm, Z-axis travel 570 mm, Changer pallet yes, Pallet dimensions 860x560 mm, Maximum load allowed 300 Kg, Swing type pallet yes, High coolant pressure yes, Cheap conveyor yes, Brand Daewoo, Model ACE VC500, Construction year 2000, DIMENSIONS AND WEIGHT, Length 3600 mm, Width 3700 mm, Height 2935 mm, Weight 9200 Kg The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped  ...

5 axis machininng center (milling/turning from bar), Under power in our warehouse, MAKE CHIRON, MODEL MILL 800 5 axis, CNC Fanuc 18iMBS (5 simoultaneous axis 1), X, Y, Z (mm) 800 – 500 - 550, Rapids (Highspeed) 60 m/min, Swivelling head CNC controlled (B axis) +/- 100°, Turning spindle Peiseler, Milling spindle 12.000 giri / 140 Nm (v nota 2), Tools 65, Tool type HSK-A 63 DIN 69893, Tool-change time 1,5 sec (v nota 3), Table 1400x500, Max table load 1200 kgs, Coolant through spindle 70 bar (see note 4), CNC controlled clamping/rotating unit for 6th face machining (v. nota 5), Pressurised linear encoders, Swarf conveyor, Renishaw-ready, Y.O.M. 2006, Weight 7500 kgs, Turning package, Max dia 65mm, RPM: 15 / 4500, Max 42,5 KW / 90 Nm., Hydraulic clamping 800 Nm., Bar loader ILS-RBK- 10012 65, Diameters min/max 5/65 mm L= 600-1200 mm, Highspeed (2), 60m/min., Spindle 20-12.000 min.â ...

DAEWOO PUMA 300 LB (Doosan), 2-axis CNC lathe, CNC Fanuc 18T, Hydraulic tailstock, Condition: very good. This machine can be inspected in our warehouse, under power., Mimu machine tools Italy

plate thickness: 3 mm Bending Angle: 165 ° : dreiphasig total power requirement: 380 V - 10,5 A 50 HZ weight of the machine ca.: ca. 3.900 kg dimensions of the machine ca.: B 2400 x L 4300 x H 1700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.