tetra pak 300 used for sale

New in box: DC Laboratory Power Supply, 3000W 40V/120A The microprocessor-controlled laboratory power supplies from Elektro-Automatik of the EA-PS 9000 2U series already offer many functions and possibilities in their standard version, making the use of this equipment particularly simple and effective. The EA-PS 9040-120 2U model has an output power of 0 to 3000 W with an output voltage of 0 to 40 V and an output current of 0 to 120 A. It offers a wide AC voltage range of 180 to 264 V, 50/60 Hz, with active PFC. The clearly arranged control panel is equipped with two rotary knobs, six push buttons and two LEDs. Together with a colour TFT display for all values and status information, this simplifies the use of the device. Auction-ID: A1-50076-160

and high-quality and adjustable laboratory power supply (DC power supply) from the German manufacturer EA Elektro-Automatik.Here are the most important technical data and features of this model at a glance: Technical SpecificationsOutput voltage: 0 to 40 V DC Output current: 0 to 120 A Maximum power: 3000 W (3 kW) Size: 19 inch rack mount with a height of 2U (2 U / Höheneinheiten)Weight: About 14.7 kg Auction-ID: A1-50076-204

Bloksma bin lift system works on air Auction-ID: A1-50076-401

With operating display, not shown Auction-ID: A1-50076-17

specification EA-PSI 9040-120 2U Output voltage 0–40 V DC Output current 0–120 A Max. output power 3000 W AC input 180–264 V AC, 1-phase Frequency 45–65 Hz Efficiency up to 92% Power factor >0.99 Voltage accuracy <0.1% of nominal Current accuracy <0.2% of nominal Voltage load regulation <0.05% Current load regulation <0.15% Voltage ripple <114 mVpp / <8 mVrms Current ripple <11 mArms OVP range 0–44 V OCP range 0–132 A OPP range 0–3300 W Remote sensing Yes Analog control Isolated, 0–5/0–10 V USB Yes Rack size 19\", 2U Dimensions approx. 483 × 88 × 463 mm Weight approx. 15 kg Operating temperature 0–50 °C Auction-ID: A1-50076-70

2x The EA Elektro-Automatik PS 9040-120 2U is a programmable DC laboratory power supply for 19\" rack mounting. Specification Value Model EA-PS 9040-120 2U Power 0–3000 W Output voltage 0–40 V DC Output current 0–120 A Control characteristic U/I/P autoranging Overvoltage protection (OVP) 0–44 V Overcurrent protection (OCP) 0–132 A Overpower protection (OPP) 0–3300 W Mains input 180–264 V AC, 50/60 Hz Connection 1-phase L/N/PE Fuse T16 A Power factor approx. 0.99 Efficiency approx. 92% Rack size 19\", 2U Dimensions 483 × 88 × minimum 535 mm Weight approx. 15 kg Article number 06230221 1x the Model EA-EL 9080-170 B Series EL 9000 B Type Programmable DC electronic load Max. voltage 80 V DC Max. current 170 A Max. power 2,400 W Power at 21 °C 1,500 W Power at 35 °C 1,200 W Resistance range 0.045–15 Ω Enclosure 19\", 3U / 3U Dimensions approx. 485 × 133 × 510 mm (W  ...

New in box: DC Laboratory Power Supply, 3000W 40V/120A The microprocessor-controlled laboratory power supplies from Elektro-Automatik of the EA-PS 9000 2U series already offer many functions and possibilities in their standard version, making the use of this equipment particularly simple and effective. The EA-PS 9040-120 2U model has an output power of 0 to 3000 W with an output voltage of 0 to 40 V and an output current of 0 to 120 A. It offers a wide AC voltage range of 180 to 264 V, 50/60 Hz, with active PFC. The clearly arranged control panel is equipped with two rotary knobs, six push buttons and two LEDs. Together with a colour TFT display for all values and status information, this simplifies the use of the device. Auction-ID: A1-50076-161

with length stop Auction-ID: A1-50076-468

Saw blade length: approx. 2.65 m Saw band width: approx. 10 mm Connection: 220 V Frequency: 50/60 Hz For more details, see photos. Auction-ID: A7-50677-69

Remeha Toros Vision boiler tank stainless steel 300 liters incl. tap water sensor. Reliable boilers for immediate and always sufficient hot water. Durable, solid boilers with sufficient capacity. Suitable for storing excess energy from solar panels in the form of hot water, produced by a heat pump. Recommended retail price € 1546,-- Auction-ID: A1-46378-842

Remeha Toros Vision boiler tank stainless steel 300 liters incl. tap water sensor. Reliable boilers for immediate and always sufficient hot water. Durable, solid boilers with sufficient capacity. Suitable for storing excess energy from solar panels in the form of hot water, produced by a heat pump. Recommended retail price € 1546,-- Auction-ID: A1-46378-815

STRUMYK 3000 Rotary Power Harrow Manufacturer: STRUMYK Model: 3000 Type: Rotary power harrow Working width: 3,000 mm Application: Soil preparation and seedbed cultivation Auction-ID: A7-50716-10

HATZENBICHLER 3000 Deep Subsoiler Manufacturer: HATZENBICHLER Model: 3000 Type: Deep subsoiler Working width: 3,000 mm Application: Deep soil loosening and breaking up compacted soil layers Auction-ID: A7-50716-11

Manual drum lifter from DENIOS with hydraulic lifting mechanism for the safe lifting and transport of drums. The device is designed for drums with a maximum weight of 300 kg and has a drum clamping device with gripping mechanism. It is used for internal logistics, in particular the handling and positioning of industrial and chemical drums. The device is used and shows normal signs of use due to use. A test sticker from LINDIG with next inspection year 2025 is available, a tested sticker documents an inspection on 07.10.2018.Scope of delivery: 1 drum lifter DENIOS FL 8-M Without further accessories Type: FL 8-M Year of construction: 2019 Max. load capacity (drum weight): 300 kg Serial number: 111310459-000100-001 Test standard: FEM 4.004 (95/63/EC, 99/92/EC, 2001/45/EC) Next inspection: 2025 ― Length: approx. 120 cm Width: approx. 100 cm Height: approx. 165 cm Auction-ID: A ...

1 x Camera BCAST SONY HSC-300R (HD-B4-TRIAX) 1 x Camera Viewfinder HDVF-20A, Sony 1 x Camera Viewfinder 6.3\", Sony (HDVF-C730W) 1 x CAM VF HOOD SONY -> HDVF-C730W/C750W 1 x Camera Tripod Adapter VCT-14, Sony 1 x CAM CCU BCAST SONY HSCU-300R 1 x CCU Remote Joystick RCP-750, Sony 1 x Tally Cable Sony HDCU/TX50 DFT The images are a representative likeness rather than a photo of the exact physical item Auction-ID: A1-50020-227

1 x Camera BCAST SONY HSC-300R (HD-B4-TRIAX) 1 x Camera Viewfinder HDVF-20A, Sony 1 x Camera Viewfinder 6.3\", Sony (HDVF-C730W) 1 x CAM VF HOOD SONY -> HDVF-C730W/C750W 1 x Camera Tripod Adapter VCT-14, Sony 1 x CAM CCU BCAST SONY HSCU-300R 1 x CCU Remote Joystick RCP-750, Sony 1 x Tally Cable Sony HDCU/TX50 DFT The images are a representative likeness rather than a photo of the exact physical item Auction-ID: A1-50020-226

1 x Camera BCAST SONY HSC-300R (HD-B4-TRIAX) 1 x Camera Viewfinder HDVF-20A, Sony 1 x Camera Viewfinder 6.3\", Sony (HDVF-C730W) 1 x CAM VF HOOD SONY -> HDVF-C730W/C750W 1 x Camera Tripod Adapter VCT-14, Sony 1 x CAM CCU BCAST SONY HSCU-300R 1 x CCU Remote Joystick RCP-750, Sony 1 x Tally Cable Sony HDCU/TX50 DFT The images are a representative likeness rather than a photo of the exact physical item Auction-ID: A1-50020-229

1 x Camera BCAST SONY HSC-300R (HD-B4-TRIAX) 1 x Camera Viewfinder HDVF-20A, Sony 1 x Camera Viewfinder 6.3\", Sony (HDVF-C730W) 1 x CAM VF HOOD SONY -> HDVF-C730W/C750W 1 x Camera Tripod Adapter VCT-14, Sony 1 x CAM CCU BCAST SONY HSCU-300R 1 x CCU Remote Joystick RCP-750, Sony 1 x Tally Cable Sony HDCU/TX50 DFT The images are a representative likeness rather than a photo of the exact physical item Auction-ID: A1-50020-228

Used and unchecked; viewing desired Auction-ID: A1-50737-89

Used and unchecked; viewing desired Auction-ID: A1-50737-106

Extra options: All-round LED lighting, daytime running lights, joystick control, blue spot, beacon, Red hazard lighting Auction-ID: A1-40403-28

new and unused charger in orig. for batteries with 300-500Ah capacity. Very high quality, shockproof IP66 Extreme Waterproof With 220V plug, without Rema plug Built in 2025 and 2026, always unused Delivery by freight forwarder possible on request. Auction-ID: A1-50765-2450

DRUKOV BRNO VSV Vertical Pressure Vessel Vertical steel pressure vessel and compressed-air receiver identified as TNK 02, suitable for compressed-air storage and related industrial applications. Manufacturer: DRUKOV BRNO Model: VSV Year: 2017 Serial number: 19665 Volume: 3,000 L Maximum allowable pressure: 10 bar Test pressure: 14.5 bar Allowable temperature range: 0–50 °C Configuration: Vertical steel vessel for compressed-air storage Certification: CE marked, 1015; fluid group 2 Condition: Used Approximate dimensions: 1,200 × 1,200 × 3,300 mm Approximate weight: 705 kg All descriptions are indicative only. Auction-ID: A1-50546-62

Equipped with 400Volt agitator at the bottom, diameter approximately 1400mm, total height approximately 4100mm. Auction-ID: A1-50393-93

Total diameter approximately 3600mm, total height 5000mm., equipped with built-up 400 volt stirring motor, snuff valve, without piping Auction-ID: A1-50393-89

Total diameter approximately 3600mm, total height 5000mm., equipped with built-up 400 volt stirring motor, snuff valve, without piping Auction-ID: A1-50393-87

Beautiful Kramer KL 300 tractor, an old model with authentic charm that will appeal to both lovers of classic agricultural machinery and collectors. This Kramer has the typical green and red colour combination and retains a particularly friendly look. Its simple and robust design is a testament to a time when tractors were primarily designed to be functional, mechanically accessible and durable. The tractor is equipped with an open driver's seat, a driver's seat, a roll bar, front and rear lighting and a rear hitch. Mechanical controls and various equipment are easily accessible. Identification noted on the manufacturer's plate: Brand: Kramer Type: KL 300 Serial No.: 659108 Gross vehicle weight: 2,300 kg Permissible load front axle: 700 kg Load capacity rear axle: 1,600 kg The tractor shows visible traces of use and age, consistent with this type of old machine. The photographs g ...

new and unused charger in orig. for batteries with 300-500Ah capacity. Very high quality, shockproof IP66 Extreme Waterproof With 220V plug, without Rema plug Built in 2025 and 2026, always unused Delivery by freight forwarder possible on request. Auction-ID: A1-50765-2451

A trailer that doesn't just transport: it's equipped to make your job easier! This Eduard Super Elec Cross, which will be on the road in 2024, combines a large load capacity, robust construction and above all a particularly interesting level of equipment. With a GVW of 3,000 kg, a double axle of 1,500 kg each and an unladen weight of only 614 kg, it offers a theoretical payload of around 2,386 kg. An ideal configuration for transporting materials, machinery, professional equipment or goods. Its large platform is equipped with aluminium sides and topped with a full high tarpaulin, allowing the load to be effectively protected. The galvanised chassis completes this particularly versatile design. ⭐ The big asset of this Eduard: its equipment! It has a GO2 electric mover with remote control, allowing the trailer to be manoeuvred and positioned at low speed without having to carry ou ...

Three-axle Fliegl DTS 300 low-loader / machine transporter with hydraulic ramps and widening loading area. Technical total weight 30,000 kg. The main inspection and safety inspection were completed on 21.07.2026 without any defects found. Equipment: · 3-axle chassis · 2 hydraulically operated ramps · Loading area can be widened up to 3,000 mm · Air brake system with load-dependent brake force control · Tyres 235/75 R17.5 140J · Spare wheel available · Side lashing options · Side underride protection · Red and white warning signs Notes: · Registration date: 24.02.2016 · VIN: WFDFLT33001005590 · Technical total weight 30,000 kg · Technical inspection on 21.07.2026 without any defects found, next technical inspection 07/2027 · Safety inspection on 21.07.2026 without deficiencies found, next SP 01/2027 · Braking effect okay according to TÜV test report  ...

Lelyterra 300-22 rotary harrow, with a working width of about 3 metres, equipped with a gearbox, PTO drive, rotors with tines and a rear bar roller for levelling and pressing the soil. Machine for seedbed preparation. Auction-ID: A3-46134-41041

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/94q2C9xuGm8I Former Linde full-service machine valid service until 09/2027 UVV valid until 09/2027 Battery: LI-ION 23.1V/205Ah/4.736kWh Battery built in 2018, measured at 23.3 volts - Integrated scale Auction-ID: A1-50765-352

Equipped with 400Volt agitator at the bottom, diameter approximately 1400mm, total height approximately 4100mm. Auction-ID: A1-50393-95

Brand: MicroStep Model: MCCompact 3001.15P Type: CNC Plasma Cutting Machine Working area: approx. 3,000 × 1,500 mm — this dimension corresponds to the designation 3001.15P and the specifications of the machines in this series. Digital control: MicroStep iMSNC, visible on the screen 1 plasma cutting head/torch Sheet metal slats Motorized gantry crane with CNC travel Control panel with monitor, keyboard, mouse and emergency stop Visible fume extraction/extraction system Cabinet cooling Rittal TopTherm SK 3302100 The machine is equipped with a Kjellberg Finsterwalde PGV 2-161 unit, which is used for the management/supply of gases to the plasma system. Auction-ID: A3-46133-35231

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/_gfcUcRkJLY - Former Jungheinrich full-service machine - Service valid until 09/2027 - UVV valid until 09/2027 - Battery: 80 V 620Ah, voltage measured at rest at 84.1V - Triplex mast with full free lift - 3rd + 4th valve; fork adjuster with side shift - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - StVZO lighting with turn signals for road approval - Safety light at the rear - Comfort seat with lumbar support Auction-ID: A1-50765-57

Equipped with built-up engine, snuff valve, agitator, cooling coil, bottom outlet and sight glass on 3 legs Auction-ID: A1-50393-53

- Galvanized steel structure made of 48.3mm round profiles, - Set of galvanized guy wires and stays made of round profiles and wire, - White tarpaulin weighing 670g/m², - Set of screws for assembly, - Set of chemical anchors for concrete mounting. - not included concrete blocks ! Space need for loading Lenght – 8 m Wide – 2,3 m Hight – 1,5 m Auction-ID: A1-50711-3

Total diameter approximately 3600mm, total height 5000mm., equipped with built-up 400 volt stirring motor, snuff valve, without piping Auction-ID: A1-50393-91

Up to 45cm deep. Equipped with 3-point suspension. Auction-ID: A1-47393-86

Sold with the entire palette. Auction-ID: A1-50867-6

Total diameter approximately 3600mm, total height 5000mm., equipped with built-up 400 volt stirring motor, snuff valve, without piping Auction-ID: A1-50393-86

Equipped with built-up engine, snuff valve, agitator, cooling coil, bottom outlet and sight glass on 3 legs Auction-ID: A1-50393-59

Intelligent pond filter with integrated UVC and automatic sludge removal NEW! WITHOUT WARRANTY Auction-ID: A1-47448-33

Equipped with automatic transmission; central door locking; sliding tilting roof; alloy wheels (original); road tax free! Auction-ID: A1-47420-173

Total diameter approximately 3600mm, total height 5000mm., equipped with built-up 400 volt stirring motor, snuff valve Auction-ID: A1-50393-88

Equipped with 400Volt agitator at the bottom, diameter approximately 1400mm, total height approximately 4100mm. Auction-ID: A1-50393-94

Equipped with built-up engine, snuff valve, agitator, cooling coil, bottom outlet and sight glass on 3 legs Auction-ID: A1-50393-57

Equipped with built-up engine, snuff valve, agitator, cooling coil, bottom outlet and sight glass on 3 legs Auction-ID: A1-50393-54

Vicon CMP 3001 trailed mower-conditioner – 3.00 m Specifications: - Brand: Vicon - Type: CMP 3001 - Product type: trailed mower-conditioner / disc mower with conditioner - Working width: approx. 3,000 mm - Trailed version - PTO driven - Hydraulically operated - Color: red Features: - Disc mower - Integrated conditioner - Conditioner rotor with flails/teeth - Cutter bar with several cutting discs - PTO drive - Cardan shaft - Hydraulic cylinders - Hydraulic hoses and connections - Swiveling/trailed drawbar - Protective caps - Protective cloths around the mowing area - Crop guidance / swath formation - Walking/transport wheels - Support leg Application: For mowing and simultaneously crushing grass and other forage crops. By bruising, the crop is processed more intensively, which promotes the drying process. Auction-ID: A1-47393-131

Nido N90 0.8-12 AWTLN 300 salt spreader – 800 liters – ESVE trailer – 1996 Nido N90 0.8-12 AWTLN 300 trailed salt spreader/de-icing machine, year of construction 1996. Equipped with a capacity of 0.8 m³ / 800 litres, spreading disc, hydraulic spreading system and original Nido electric control box with digital display. Mounted on a single-axle ESVE AWK 1800 trailer chassis and equipped with Dutch registration. Specifications: Brand Nido Type N90 0.8-12 AWTLN 300 Year of construction 1996 Serial number N9002759 Capacity 0.8 m³ / 800 liters Own weight spreader 650 kg according to type plate Rifled salt spreader design Spreading system disc spreader Drive hydraulic Original electric Nido control box Digital display Dosing and spreading functions electrically operated Warning light and rear marking present Dutch registration, license plate WP-20-RV Trailer: Manufacturer ESVE ...