tetra pak 300 used for sale

Solenoid valve, directional valve, valve terminal, pump preload valve -Manufacturer: Rexroth, pump preload valve for the SYDFE control system -Type: SYDZ 001-13/300V028M -Dimensions: Ø 75 x 120 mm -Weight: 2.9 kg

- engine power: 1.1 kW - dial diameter: 300 mm - cut from below - cutting at an angle of -45 °, 90 °, + 45 °, intermediate angles set manually - vertical pneumatic pressure - protective cover - cooling installation

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Indramat: AC servo controller -MOD: 1/11919-002 -Art.: 234500-14530 - Quantity: 1 piece -Dimensions: 390/105/H325 mm -Weight: 8.2kg

Wire electrode, welding wire, welding wire -Material: stainless steel -Shielded gas wire electrode: started roll -Type: 318 Ø 1.00 mm -Dimensions: Ø 300 / 105 mm -Weight roll: 13.8 kg

Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 300 mm -Reference: Short cone 8 (139.8 mm) -Dimensions: Ø 300 x 100 mm -Weight: 14 kg

SAA 3001/3003 Suction sturdy construction made of solid sheet steel lower static charge compared to plastic constructions Easy to drive thanks to swivel castors Air capacity 3910m³/h Diameter on the device: 150mm Diameter at distributor: 3x 100mm 50Hz 2200W Weight 59kg G&STÜ-5922301 230 volts G&STÜ-5922303 400 volts

I sell the Flader Orbitalbuerstmaschine. Model Quickwood Fladder System Working width 1060mm. Mechanically adjustable rotazion and feed speed. Cheap for rustic bushes and patina surfaces. Profiles possible. Made in Denmark Hansen - Hundebol AS

Standard configuration Machine ? Stable C-frame for easy access ? Coordinate guide for high-precision machining ? Linear magazine, 3 clamps ? Maintenance free drives ? Repositioning device with programmable presser foot ? Parts chute 500 x 500 mm ? Good parts container ? Swarf bucket Cutting head ? Hydraulic punching head ? Single tool adapter ? 360? rotation of all tools ? Programmable presser foot ? Tool length compensation ? Spray lubrication for punches ? Vacuum slug removal ? Forming Control ? Open control system based on BOSCH ? Control panel with TFT colour screen 12.0? ? Program management ? Online-help ? Integrated technology data ? Diagnostic functions ? Teleservice Programming ? Machine-oriented shopfloor programming Data transmission ? Disc drive and network connection Safety ? CE marking ? Light barriers ? Rapid hydraulic shutdown Additional equipment ? Function Mul ...

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Fuchs: EKW 46 K/5 KE -Outer diameter: 300 mm -Width: 13 mm -Inside diameter: 100 mm -Price: per piece -Number: 4 pieces -Weight: 1.9 kg

SU 125/3000 Swing over the bed 1250 mm Circular diameter above the 940 mm Tip distance 3000 mm Diameter of clamping plate 1250 mm Maximum workload of the workpiece 6000 kg Machine weight approx. 10,000 kg Delivery items of the accessories : - facing head 710 - 3-jaw chuck 630 - steady rests

Meat cutting machine with program control different filing patterns Repaired

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Fuchs: EKW 46 K/5 KE -Outer diameter: 300 mm -Width: 10 mm -Inside diameter: 100 mm -Price: per piece -Number: 2 pieces -Weight: 1.4 kg

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Outer diameter: 300 mm -Width: 40 mm -Interior diameter: 51 mm -Weight: 6.2 kg

Travel distances: 415 x 340 x 355 mm [ X x Y x Z ] HSC Machine Number of axles: 3  Control: Heidenhain iTNC 530  Table size X: 470 mm Table size Y: 400 mm workpiece weight: 500 kg Tool changer: 30 - fold Rapid traverse: 30 m/min electronic handwheel

Machine type MIG/MAG inverter welding system Brand Mahe Type Eco MIG 300 Digital Supply voltage 3 x 400 volts Setting range 10 – 300 amperes Duty cycle 40 % ED at 300 amps 60% ED at 240 amps Current adjustment infinitely variable incl. wire automatic Cooling inverter by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feed gearbox 4-roller gearbox Fuse 16 Ampere Dimensions L x W x H 880 x 400 x 635 mm Special accessories wire switch without power for threading TIG DC, without RF Rod electrodes weldable Weight 34 kg Age as good as new Condition workshop tested, as new, incl. UVV workshop test report Scope of delivery welding system with the following accessories 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long 1 piece pressure reducer argon with 2 pressure gauges 1 roll of weldin ...

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Abrasives: 48 types, 189 pieces in total -Outer diameter: 40 to 300 mm -Type: 1 photo with type designation/dimensions can be sent per article -Price: complete -Dimensions: 1200/800/H200 mm -Weight total: 202 kg

- DOCUMENTS AND MANUALS INCLUDED WE ORGANIZE SHIPPING AS WELL Max. concentricity errors at 300 mm: 0.008 mm RS232 / USB : interface Measuring range diameter (x) 310 mm Application range height (z) 320 mm Weight 90 Kg Max. tolerated errors (mechanical) 0.003 mm Max. tolerated errors (vision system) 0.005 mm Max. radius measurements < 5% - Max. angle measurements errors < 0.2° Max. concentricity errors adapter 0.002 mm Max. resolution 0.001 mm Max. manual moving speed 1 m/s INSERT CONUS MK5 IT WAS USED BY LATHE CNC DOOSAN PUMA

Made in Germany Saw blade size: 300 mm Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm 2 saw blade speeds: 40 / 80 rpm. Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug. free domicile within Germany

Polycarbonate, plexiglass, acrylic glass, acrylic glass -Plastic panels: transparent -the panels are covered on both sides with protective film -the panels can be cut with guillotine shears -the panels are flexible but not suitable for bending -Length: 3000 mm -Width: 2000 mm -Thickness: 2 mm -partly slight damage to the edges -Number: 20x pieces available -Price: per piece -Weight: 14.5 kg/piece

Roller conveyor, conveyor belt, roller track -Roller conveyor: 5 floors -Roller width: 300 mm -Rollers: Ø 50 mm -Roller spacing: 150 mm -Floor spacing: 700 mm -Overall dimensions: 650/400/H3010 mm -Weight: 72 kg

Kirsch / Iveco Emergency Power System Diesel Generator Power Generation Generator Container Operating hours generator: 411 hours Kirsch Power Generation Unit Type: D 300-4 IWE Year of construction: 2007 Rated power: PRP 240 kW Rated voltage: 400 V Rated current: 433 A Nominal frequency: 50 Hz Rated speed: 1500 rpm/min Weight: 2530 kg Iveco Engine Motor Model: F3BE0685CBXXX Displacement: 12.9 liters Specified kW (BHP): 330 (442,50) at 1800 rpm Fuel consumption at specified power: 245mm^3/stroke

Machine type MIG/MAG inverter welding system Brand Mahe Type Eco MIG 300 Analog Supply voltage 3 x 400 volts Setting range 10 – 300 amperes Duty cycle 30 % ED at 300 amps 60% ED at 240 amps Current setting 12 switching stages Cooling inverter by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive Fuse 16 Ampere Dimensions L x W x H 880 x 400 x 635 mm Special accessories wire switch without power for threading Rod electrodes weldable Weight 34 kg Age as good as new Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can non-stick spray 1 piece spare parts box, k ...

Sliding table saw Circular table saw Circular saw Carpentry circular saw Format saw WH Machines Type: C45-300E Economy New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 380 mm Grid carriage locking system with operation at the carriage end. Cantilever table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cutting to length up to approx. 300cm Electric height adjustment of the saw blade Stable swivel guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the saw unit. Parallel fence up to 125cm with fine adjustment stable 35 mm round rod guide Parallelogram protection device with upper suction foldable away for vertical workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up  ...

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: Stroke 300 mm -Piston rod: Ø 28 mm / Thread Ø18 x 40 mm -Hole: Ø20 x 16 mm -Cylinder: outer Ø 62 mm -Dimensions: 585/120/H90 mm -Weight: 11.2 kg

offer 21055 Double polishing block Specifications: - Grinding wheel diameter approx. 300 mm - Grinding wheel width approx. 40 mm - Grinding wheel bore approx. 70 mm - Disc speed 1450 rpm - Working height 1100 mm -Mot. Dust extraction - Drive 400 V / 1.1 kW - Space requirement approx. W 800 x H 1250 x D 600 mm - Weight approx. 150 kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -T-slot plate -Width: 300 mm -Length: 420 mm -Height: 70 mm -Groove width: 14 mm -Weight: 52 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 150 mm -Piston diameter: 63 mm -Piston rod: 20 mm -Thread intake: M16 -Air inlet and outlet: adjustable -Price: per piece -Number: 2 pieces -Dimensions: 405/75/H75 mm -Weight: 3.6 kg/piece

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.1 kW -Speed: 1400 rpm -Max. Grinding wheels: Ø 300 x 32 mm -Operating voltage: 380 volts -Dimensions: 830/600/H1200 mm -Weight: 231 kg

Technical data for the shelf connector: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Shelf connector, used for shelf spacing: 300 mm Cross-section: U 50x25 mm Material color: sendz. galvanized Weight: 0,33 kg | Pcs.

The scope of delivery includes: 01x Shelf connector, used for shelf spacing: 300 mm Profile abm.: U 50 x 40 mm Material color: blue Weight: 0,55 kg | Pcs.

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet -Dimensions: W800/H1200/D300 mm -Braids: several -Weight: 62 kg

Maize leveling blade, silo leveling blade, maize leveling blade -The shield is rounded for better material flow -Working width: 3000 mm -Sign height: 1250 mm -Wall thickness: 18 mm -Delivery time about 2 weeks -Weight can be made according to customer requirements -Weight: approx. 1000 kg

Technical data for the shelf connector: Shelving system: Nedcon Type: NS The scope of delivery includes: 01x Set Spacer NR screwed L300, new consisting of: 01x Spacer NR L=300, sendz 02x hexagon screw 8.8 M10x25 galvanized 02x tooth nut 6-edge 8.8 M10 flange verz. 02x flat disc M10 galvanized

The scope of delivery includes: 01x Shelf connector, used Shelving system: Nedcon Type: NS suitable for frame profile width: 100 mm for shelf spacing: 300 mm Profile abm.: U 65 x 40 mm Weight: 0.83 kg | Pcs.

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 300 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Dimensions: 467/53/H53 mm -Weight: 2.25 kg

The scope of delivery includes: 01x Shelf connector, used Manufacturer: Dexion Type: P90 for shelf spacing: approx. 300 mm Total length: approx. 380 mm Cross-section: U 51 x 25 mm Material color: sendzimir galvanized Weight: 0,47 kg | Pcs.

Technical data for the pallet rack traverse: Shelving system: Dexion Type: Speedlock P90 (Silverline) The scope of delivery includes: 01x pallet rack traverse, used Material color: orange Truss type: 125|17 I - Profile: 125 x 50 mm Agraffe: 5 HK (hook) clear width: 3,000 mm load per pair of trusses 2,400 kg, at the same time. distributed load The compartment loads are only valid in conjunction with column P90/20. In addition, depending on the field load and the hook heights, the load-bearing capacity of the hook tab must also be checked. 02x locking pins, used Execution: compl. galvanized For securing the longitudinal members against unintentional lifting

Technical data for the pallet rack traverse: Shelving system: Dexion Type: Speedlock P90 (Silverline) The scope of delivery includes: 01x pallet rack traverse, used Material color: orange Truss type: 125|14 I - Profile: 125 x 50 mm Agraffe: 5 HK (hook) clear width: 3,000 mm load per pair of trusses 2,100 kg, at the same time. distributed load The compartment loads are only valid in conjunction with column P90/20. In addition, depending on the field load and the hook heights, the load-bearing capacity of the hook tab must also be checked. 02x locking pins, used Execution: compl. galvanized For securing the longitudinal members against unintentional lifting

Technical data for the pallet rack traverse: Shelving system: Dexion Type: Speedlock P90 (Silverline) The scope of delivery includes: 01x pallet rack traverse, used Material color: sendz. galvanized Truss type: 125|17 I - Profile: 125 x 50 mm Agraffe: 5 HK (hook) clear width: 3,000 mm load per pair of trusses 2,400 kg, at the same time. distributed load The compartment loads are only valid in conjunction with column P90/20. In addition, depending on the field load, and the hook heights the load-bearing capacity of the hook tab be checked. 02x locking pins, used Execution: compl. galvanized For securing the longitudinal members against unintentional lifting

Technical data for the pallet rack traverse: Shelving system: Dexion Type: Speedlock P90 (Silverline) The scope of delivery includes: 01x pallet rack traverse, used Material color: sendz. galvanized Truss type: 125|14 I - Profile: 125 x 50 mm Agraffe: 5 HK (hook) clear width: 3,000 mm load per pair of trusses 2,100 kg, at the same time. distributed load The compartment loads are only valid in conjunction with column P90/20. In addition, depending on the field load, and the hook heights the load-bearing capacity of the hook tab be checked. 02x locking pins, used Execution: compl. galvanized For securing the longitudinal members against unintentional lifting

Stock number: 3768 CNC PRESS BRAKE Manufacturer: DONEWELL, Type: 100 x 3000 Machine NO.: 588 12 2348, Year of construction: 1988 Specifications: Size bending length 3100 mm Size Printing capacity 100 tons Stroke length 215 mm Stand passage 2600 mm Projection 265 mm Bending speed 420 mm/min Hydraulic. CNC control Cybelec EURO III Fabr. Controlled in Y1-Y2-X Achen Program-controlled backgauge. X - 500 mm Accessories: Segment-split upper tool 3100 mm Multi bottom tool 3100 mm Operating manuals Length: 1300 mm, Height: 2450 mm, Width: 3100 mm, Weight: 7000 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DNC-32-300-PPV-A -Piston diameter: 32 mm -Stroke: 300 mm -Pressure: max. 12 bar -Dimensions: 455/45/45 mm -Weight: 1.5 kg

Code: 0046 Brand: OMS Model: FC 300 RAP - CE Standard Crosscutting machine with suction base for cutting frames, furniture, window frames, Pvc, aluminium - CE Standard Technical data Blade diameter mm 300 Motor Watt 2800 three-phase - Rpm 3000 Swivelling head Base with suction unit Overall dimensions mm 500 x 400 x 1500 h Weight kg 80

Demolition hammer, chisel hammer, Bosch hammer, mortising hammer -Length: 300 mm -Price: per piece -Quantity: 52 pieces -Minimum order: 3 pieces -Dimensions: 300/20/H20 mm -Weight: 0.6 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 300 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Dimensions: 465/53/H53 mm -Weight: 1.75 kg

Energy chain, cable drag chain, energy chain -Passage: 300 x 55 mm -Dimensions: 2515 x 340 x 85 mm -Weight: 20 kg

capacity: 30,000 ltr./h 3 component mixer with Bran + Lübbe fine dosing pump

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 300/198 mm -Height: 32 mm -Number: 2x pillows available -Price: per piece -Weight: 3.6 kg/piece

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 300/210 mm -Height: 34 mm -Number: 4x pillows available -Price: per piece -Weight: 3.6 kg/piece

Specifications: - Polishing wheels - grinding wheel dimensions approx. 300 x 40 x 76 mm - Sanding belt dimensions approx. 3500 x 50 mm - Contact wheel dimensions 400 x 50 mm - Drive speed 1450 rpm - Drive 400 V / 1.8 kW - Space requirement approx. W 1100 x H 2450 x D 800 mm - Weight approx. 300 kg