tetra pak 30 used for sale

Another great deal for you: PERI PEP 20-300 floor props in ⭐⭐  star quality! 👀 All advantages at a glance: individually tested - the thread can be opened and screwed together long service life thanks to hot-dip galvanizing extension length from 1.71m - 3.00m permissible support load of 20kN 💡 42 props are supplied in 1 PERI stacking pallet 1.20x0.80m. This is already included in the total price. Price: from € 1239,00 / Stapelpaletten (excl. VAT).Price valid: per full multi-trip container Partial quantity: possible Subject to prior sale Classified 2-star Serviced & ready to use. Basic cleaned condition. Medium used formwork & scaffolding with traces of use. Suitable for standard requirements. 27.00 x Floor prop PEP 20-300, galv. (Art-No. 103058), 2 stars, € 1.239 / pc

Framax Element 3.30 m †Power Without Compromise! 💪🔩 Looking for a high-performance formwork element that boosts efficiency on-site? Then our Framax Element 3.30 m is exactly what you need! 🚀 ✔ Strong & durable †thanks to a galvanized and powder-coated steel frame ✔ Quick assembly †only 2 ties needed for a concreting height of up to 3.15 m! 🔁 ✔ Smart design †with an integrated locking system & continuous groove for easy connections ✔ Xlife Framax panel †screwed from the back for extra durability Wall heights up to 3.30 m †no extensions needed! 🎯 Sounds good? Get your Framax Element now at Form-on! 🛒✨ Price: from € 377,00 / PCS (excl. VAT). Partial quantity: possible Subject to prior sale Classified 2-star Serviced & ready to use. Basic cleaned condition. Medi ...

An IPG laser source with peripheral equipment is available. 1) IPG Laser YLS-3000-CT, year of manufacture: 2013, wavelength: 1070nm, modulation: 0kHz-5kHz, power control range: 10%-100%, power stability: +/-1%. Machine dimensions X/Y/Z: approx. 800mm/800mm/560mm, weight: approx. 400kg. 2) Industrial chiller IPG Laser LC 170.01-A.3.5, year of manufacture: 2013, cooling capacity: 17kW, max. operating pressure: 28bar, refrigerant: R407C, refrigerant quantity: 3.5kg. 3) Wire feeder Dinse DIX WD 300, feed rate: 20m/min, wire diameter range: 0.8mm-1.6mm, machine dimensions X/Y/Z: approx. 300mm/250mm/250mm. 4) Laser process head. Documentation available. On-site inspection is possible.

material width: 0200 mm material thickness: 3,00 mm no. of straightening rolls: 21 sheet thickness - min.: 0,50 mm diam. of the rolls ca.: 30 mm speed: 56 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Hydraulic drive All rollers driven Side belt guide with handwheel PSS300 control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. working lenghts 3000mm Max working square 220x220mm Max. working diameter 450mm (when wood round) Stroke axis X 3800mm Stroke axis Y 460mm (plus 230, minus 230) Stroke axis Z 510mm Stroke axis Y2 360mm (turning) Stroke axis Y3 360mm (milling) Stroke axis Y4 360mm (sanding) Stroke axis B (rotary +/- 90°) Power: Axis A (rotary main motor) 22,2 kw 0-1500 upm Axis Y2 11kw 1000-4500 upm Axis Y3 11kw 1000-6000 upm Axis Y4 2,2 kw 3000 upm max. 24.000 upm Electrospindle (HSC) 12 kw max. 24.000 upm Toolchanger 6 positions HSK 63 F Total installed power 70 kw Weight approxm. 9,5 tons - Producer Intorex - Type TMC 3000 - Year of construction 2010 - Location Germany

A CNC vertical long-bed machining center Mazak is available. Travel X/Y/Z: 3000mm/800mm/720mm, B-axis: 110°, C-axis: 360°, table diameter: 600mm, long-bed table dimensions X/Y: 3500mm/820mm, max. table load: 2500kg, spindle interface: BT40, speed: 18000rpm, rapid traverse: 50m/min, tool stations: 48, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5250mm/3650mm/3200mm, weight: approx. 16100kg, control: Mazatrol Matrix 2, spindle hours: 18502h. Including rotary table Nikken CNC 601MA, high-pressure coolant, center partition wall, Renishaw probe, touch probe RMP 60Q, CAD/CAM software Topsolid 7.18 and postprocessor. Documentation available. An on-site inspection is possible.

A small compressor system including separator and dryer is available. 1) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 2) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 3) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible.

power capacity: 30/37 kW volt: 380 V ampere: 70/78 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 13.0 mm thickness at Niro-steel: 8.0 mm down holder: 14 Stück no. of strokes: max. 11 Hub/min cutting angle: 1°15 work height max.: 770 mm column arm: ? mm oil volume: 300 ltr. control: konv. total power requirement: 15.0 kW weight: 11800 kg range L-W-H: 4255 x 2250 x 2400 mm Features: - Robust electro-hydraulic swing pruning shears - Operation, swivels to the front left - Electro-motorized backgauge on recirculating ball screws Movement by push-button (forwards backwards) including ELGO digital position indicator - Manual quick cutting gap adjustment by eccentric (right side stand) - Machine stand with overhang - 1x long side stop, with mm scale - 2x front support arms, with mm scale - Ball rollers in the front support table - Hinged front finger guard - 1x free-moving foot switch - Rear safety device (protective grille) - 2x front emergency s ...

Qty. 1 Second-hand Complete Aluminium Extrusion Line Mfc.: CLECIM, AUBURTIN, OILGEAR Force: 3000 MT Bilet dia.: 8’’ Built: 1972 Modernised: Mechanical & Electrical in 2000 Scope of supply: Log Loading Table Log Furnace Billet Shear Extrusion Press Run-out Table Puller Stretcher Finishing Saw Aging Furnaces

faceplate diameter: 2950 mm swing diameter: 3200 mm turning height: 3500 mm table load: 20 t feed range: 3000 mm/min main drive motor: 70 kW milling drive: 16,1 kW Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC-control FAGOR 8070 C-axis with 360,000 positions Milling head Inspection under power in the factory possible. Machine location is Spain. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Slicer Graef Master 3020, with scale, Connection 400V, knife diameter 300mm, Dimensions LxWxH approx. 60x57x42cm, weight approx. 38kg Year of manufacture 2018, with signs of use, technically perfect condition

Technical data according to Muller Martini

length: 3000 mm width: 2000 mm height: 250 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3 2 0,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Deze watertank is geschikt voor de opslag van drinkwater en vele andere vloeistoffen. De tanks hebben een wanddikte van circa 6 mm. Aan de boven- en onderkant van de tanks kunnen aansluitingen voor inlaat en uitlaat worden aangebracht. De tank wordt geleverd zonder gemonteerde aansluitingen. Maximale inhoud: 3000 liter Diameter: 1450 mm Hoogte: 2050 mm Gewicht: 70 kg Afmeting deksel: 400 mm 2 exemplaren beschikbaar

FOR SALE 3 CHILLER CARRIER YEAR 2 UNITS 2004 AND 2002 PRICE LOADED DEPARTURE FRANCE 7500€ FOR 3 UNITS

A horizontal ball mill from the Ruitong Group is available. Volume: 30l, material: steel, motor power: 22kW, electrics: Delixi, max. operating temperature: 45°C, shaft speed: 780rpm, dispersion discs: 11, throughput range: 50kg-600kg/h, max. product viscosity: 100Pas. Machine dimensions X/Y/Z: approx. 2000mm/950mm/1600mm, weight: approx. 950kg. Documentation available. On-site inspection is possible. The mill is located in China

sheet width: 3100 mm plate thickness: 6.0 mm ST pre-bending: 4.0 mm ST diameter of upper rolls: 200 mm side roll diameter: 165 mm diameter of lower rolls: 190 mm bending speed: ca. 5.0 m/min Control: DIGI oil volume: 80.0 Liter voltage: 380 V total power requirement: 6.0 kW weight: 6000 kg range L-W-H: 5250 x 1500 x 1400 mm very good condition () Current new price approx. 80,000 euros Special price on request Features: - Robust electro-hydraulic 4-roll bending machine 4-roll concept offers a wide range of bending and rounding options - MG swivel control panel Operation - control of all rolls and machine axes Digital position display Manual operation via joysticks - Two central rolls are driven directly by hydraulic motors - Conical rolling possible via inclined position of the rolls - Parallelism of the side rollers via torsion shafts - Bending on both sides - Diameters of up to 1 ...

Vakumix continuous homogenizer in the design and mobile on castors. For connection to existing containers Connection suction side: DN 100 Connection pressure side: DN 80 kW: 30 Suction device DN25 front side for sucking in liquids. NEW: Control, converter, all seals incl. mechanical seal. The continuous homogenizer is PLC controlled. Delivery time approx. 4 weeks.

Under-table cross-cut saw Emmegi type Calvet 300 M Technical data: with automatic stop Fence pushes the material to the cutting position after entering dimensions Saw blade: coming from below Saw blade diameter max. (mm): 300 Right long table: with automatically movable stop Table length (mm): 3200 Table width (mm): 120 Roller conveyor left: roller conveyor length - 3550 mm, roller conveyor width - 310 mm Roll width (mm): 240 Roller conveyor and stop table: not separable Machine weight (kg): 80 without pictured suction

table length: 3048 mm table width: 1524 mm burner heads: 1 stroke: 270 mm speed: 100 m/min dimensions: 8900 x 2260 x 2220 mm weight of the machine ca.: 7.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Centrifuge Speed: 3500 rpm Drum inner diameter: 448 mm Drum wall thickness: 11 mm Material: Steel permissible. Density: 1.50kg/dm³ Total weight: 4300 kg Stated price of 10,500 € in unrepaired condition, 24,500 € net in overhauled condition

Used rotor unit without frame and motors (spare rotor) Speed: 3500 rpm Drum inner diameter: 448 mm Drum wall thickness: 11 mm Material: Steel permissible. Density: 1.50kg/dm³ Stated price of 8000,-€ in unrepaired condition, 15.500,-€ net in overhauled condition ---------------------------------------------------------------------- ----------------------------------- used rotor unit without frame and motors (spare rotating) Rotating speed: 3500 rpm Bowl inner diameter: 448 mm Bowl wall thickness: 11 mm Material: Steel Max. density: 1.50 kg / dm³ stated price of 8000,-€ in unrepaired condition, 15500,-€ in repaired condition

Falch Trail Jet 15 As good as new 300bar 24l/min Hot water 228 Hours 6 months warranty Price plus VAT CLIC Industrial Rental For 20 years, we have specialized in the field of high pressure, trade, stone cleaning, industrial cleaning and much more. Available throughout Europe Headquarters Austria AT Depot 1 Euskirchen DE Depot 2 Rotterdam NL

It is a used Funk flake ice machine C 300 for sale. The machine is checked and fully functional. The machine is in very good condition. Daily output up to 300kg flake ice. Price on request.

Stock# U2376-4 Used stainless steel twin shaft paddle mixer by Alco Food Machines (DE) model AMP 300-S with total volume of mixing chamber 330 l. Working volume of mixing chamber about 230 l. Mixing chamber has internal dimensions L 900 mm x W 805 mm x D 535 mm. Top open. Machine is equipped with two mixing shafts, each driven via gearbox and el motor 0.9/1.5 kW, 705/1415 rpm, 380/400V, 50 hz. Each shaft is equipped with two half-ribbons and seven mixing paddles. Discharge through front wall two discharge outlets, each equipped with stainless steel lid, operated pneumatically. Machine is mounted on four stainless steel legs and is equipped with local control panel. Last time used in food industry.

Offer 24204 Technical data: - Largest turning diameter over bed 420 mm - Center width 1000 mm - Spindle bore mm - Mounting cone of the tailstock quill MK 4 - Travel of the tailstock quill 200 mm - Spindle speeds 40 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Drive 400 V - with: - 3 jaw chucks - SWS steel holder with 3 inserts - Space requirement approx. W 2800 x H 1250 x D 950 mm - Weight approx. 2200 kg

Universal Components Mixer EM 300 in stainless steel, Fabr. MTI Detmold / Germany, built in 1997

Universal Components Mixer in Stainless Steel, Type EM 300, Fabr. MTI Detmold Germany, built in 1997

FOR SALE GAS TURBINE Tempest SGT300 packaged 7941 kva year 2000 50 HZ VOLT 11 000

Key data: 30 t

Inv. Num. : 8878 Type: Sanshs Automa 30T Producer: CHIESA Created: 2017 Parameters: Operating hours: 100 h Compressive force: 30 t Working area: 2000 x 500 mm Ram size: 500 x 500 mm Machine weight: 3000 kg

Pleiger hydraulic motor for Krauss Maffei MOS 3000-05-204 Krauss Maffei No. 6249672

- Forming rolls R30/40/50/60/70/80/90/100 - Under power good running order - Documentation drawings availebel -  

Key data: 3000 mm, 13 mm, 1000 mm

Description of the used machine • Angle stop • Support arms • Controlled backgauge 1000mm Hfoboh Dm H Ioqxim Iqjb • Swing cut shears • Light barrier for rear space protection • Secure finger protection thanks to grilles • Foot switch with emergency stop switch and safety line • Rotatable knives • Touchscreen control Used, well-preserved guillotine shears Durma SBT 3013 Swing-cut shear with sheet metal fixation via hydraulic hold-down holders. Make: Durmazlar Model No.: SBT 3013 Year of Make: 2009 Technical data: Sheet width 3100 mm Max. sheet thickness 13 mm (400 N/mm2) Connected load 30.0 KW Cutting angle° 1.45° Weight approx. 8000 KG Table width 600 mm Table height 845 mm Number of hold-downs 16 Space requirement (LxWxH) approx. L 4.25 x W 3.85 (plus VAT) support arms) x H 2.2 m Adjustable back gauge 1000 mm Year of construction 2009 ...

x-travel: mm y-travel: mm z-travel: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2007 Prefamac 30kg chocolate tempering machine with enrobing belt (with blower), offtake belt, vibrating table and 2x heating lamps.

General SKU262X271 LocationBarneveld MakeProminox TypeCuve Pressure Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume403 Ltr. Motor2.2 KW Specified Features - Processing vessel MaterialStainless steel 1.4435 (316L) Processing vessels Capacity403 l., (300 l.) Vessel sizesDia. 1000x900 l. ManholeDia. 204 mm OutletDN51 Motor2,2 kW, 230/400 volt, 1400 rpm Closed stirring vesselcheck Capacity403 l., (300 l.) Vessel sizesDia. 1000x900 l. Conical bottomcheck Dished top sidecheck ManholeDia. 204 mm Top connectionscheck OutletDN50 Half coil jacketedcheck volume 13,3 l. Max. temperature150°C With anchor stirrercheck with scraper With dissolver stirrercheck Motor2,2 kW, 230/400 volt, 1400 rpm Speed mixing shaft5,3/32 rpm Motor5,5 kW, 240/380 volt, 1460 rpm Information No.30430 Year of construction2000 Mounte ...

Bosch ampoule compact system, fully automatic line for washing, sterilizing, filling and closing ampoules of 1 ml., 2 ml., 3 ml., 5 & 10 ml. consisting of Bosch RRU 3040 washing machine, possible container diameter 8-32 mm, Bosch HQS 2030 hot air sterilization tunnel, Bosch ALK 3040 filling and sealing machine incl. laminar flow hood, possible container diameter 9-26 mm, container height 35-75 mm, magazine, including format parts for DIN ampoules of 1 + 2 ml. (Ø10, 75 mm), 3 ml. (Ø12.75 mm), 5 ml. Ø14.75 and 10 ml. (Ø17.75 mm), output up to 12,000 ampoules per hour.

A semi-automatic NC tube bending machine Tracto-Technik is available. Tube diameter: 48mm, max. tube length: 3000mm, max. material thickness: 4mm, max. bending angle: 180°, max. bending radius: 125mm, bending accuracy: +/-0.2°, bending speed: 20°/s. Machine dimensions X/Y/Z: approx. 3900mm/800mm/1250mm, weight: approx. 700kg, control system: Siemens Simatic. Documentation available. On-site inspection is possible.

General SKU388X977 MakeZirbus TypeVTS 300 LocationBarneveld CEcheck Pressure Working pressure0 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface2 m2 Specified Features - Freeze dryer Freeze dryercheck Cooling surface2 m2 Number of plates2x 9 Plate sizes500x450 mm Between the plates15 mm With condensercheck With cooling compressor2x MakeTecumsek TypeTFHT2511Z BR Cooling mediumR452a MaterialStainless steel 1.4571 (316Ti) Information No.2152 (typeplate on cooling instalation) Year of construction2006 With switchcheck Floorspace0,85x1,45 m Total height1,85 m Weight400 kg Extra SpecificationsWith vacuum pump, type D25B, cap. 25 m³/hFreeze dryersZirbusDryers > Freeze dryersBrand > Zirbus What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide ...

General SKU213X072 LocationBarneveld MakeHosokawa Nautamix NV Haarlem (NL) Pressure Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume300 Ltr. Motor1.5 KW Specified Features - Conical mixer Conical mixercheck Capacity300 l. Largest cone diameter1200 mm Cone height1600 mm Dished topcheck Top drivecheck Motor1,5 kW, 230/400 volt, 1459 rpm Motorca. 0,4 kW Cantilevered screwcheck With jacketcheck Bottom dischargeDia. 270 mm MaterialStainless steel 1.4301 (304) Information TypeDBX-300 No.M18123 With switchgearcheck Floor space1,40x1,40 m Total height2,40 m Weight800 kgConical mixersHosokawa NautaMixers > Conical mixersBrand > Hosokawa Nauta What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in  ...

General SKU422U1327 LocationBarneveld MakeBucher Guyer AG Pressure Vacuum possiblecheck Working pressure trays2 Bar Main Features MaterialStainless steel Volume5000 Ltr. Surface30 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housingcheck Stainless steel trayscheck Heating surface30m² Drying chamber capacity5 m3 Drying chamber sizes1991x2080x1420 mm Max. temperature110°C With jacketcheck Max. temperature100°C Number of trays11 Tray sizes1550x2000 mm Distance between the trays100 mm With 2 doorscheck Connection for the vacuum pumpcheck With vacuum pumpcheck Motor5,5kW, 400/690 Volt, 1455rpm MaterialStainless steel 1.4541 (321) Information TypeVTS D7 30m² Machine number5266/1-11 Year of construction2000 With switchgearcheck Floorspace3x2,6 m Total height2,6 m Weight6300 kg Extra SpecificationsOn top of the tray dryer, a heat ex ...

Complete line for washing/sterilizing/filling/sealing open funnel/spike ampoules, consisting of: Bosch RRU 3064 washing machine - Capacity max. 18,000 ampoules/h - Ultrasonic cleaning in heated water bath - Internal and external cleaning with hot pumped water/compressed air/fresh water/compressed air - Transfer of ampoules to sterilization tunnel - Shared control cabinet with HQS and ALK 5080 - PLC Siemens S5 Bosch HQS 3420 sterilization/depyrogenation tunnel - Capacity max. 18,000 ampoules/h - Drying, sterilization, and depyrogenization of ampoules at a hot air temperature of 150-350°C - Cooling of ampoules to max. 10-15°C above cooling air temperature - New tunnel conveyor belt in August 2021 Bosch ALK 5080 filling/sealing machine - Max. output 18,000 ampoules/hour - Pre- and post-gassing - Filling - Preheating - Sealing via skewer removal, sealing gassing  ...

Hebrock edge banding machine AKV 3005 DK-F Year of manufacture 2004 Equipment and technical data: max. edge thickness 3 mm with preparation for alternating pools min./max. workpiece thickness 8-60 mm Feed speed approx. 10 m/min Readiness for operation approx. 5 min. min. workpiece length 190 mm min. workpiece width 80 mm Joining milling unit with 2 milling heads with PLC control Glue basin with contact roller Pressure zone Pruning shears Cross-cut saw Combination milling unit flush/chamfer/radius pneumatically adjustable 2- Milling station Corner Copy Unit Wing scraper, short version Radius scraper blade Spraying device Dimensions approx. 4700 x 1200 x 1530 mm Weight approx. 1150 kg

Aircooled chiller/Heat pump CARRIER 30RQ0522 0157 PEE 465 kW/560 kW Cooling capacity: 465 kW / 132.22 tons (12/7 — 35°C) Heating capacity: 560 kW / 159.23 tons (40/45 —7°C) Year of manufacture: 2011 Options: Heat pump. Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 8 pcs. Danfoss SH300A4ACB (scroll) Type of refrigerant: R410a Number of fans: 6 pcs. + 2 pcs. (Frequency inverter) Hydraulic module: 2 pcs. water pump WILO DL65/170(163)-11/2 Carrier, expansion vessel. Dimensions: 4.8x2.3x2.4 m. Weight: 5059 kg. Working hours: 448/457/454/119/835/772/771/760 h. Condition: Good

General SKU248T594 MakeMolteni LocationBarneveld TypeI 300 Main Features MaterialMild steel Volume250 Ltr. Motor7.5 KW Specified Features - Planetary mixer Planetary mixercheck Motorcheck 7.5 kW, 380 Volt (Ciem) With variable speed drivecheck Speed scraper1450-950 rpm With pancheck (2x) Capacity250 Ltr. Pan sizesdia. 700x680 mm MaterialStainless steel Information No.25-12 Year of construction1968 Floor space1,6x1 m Total height1,6 m Weight1500 kgPlanetary mixersMolteniMixers > Planetary mixersBrand > Molteni What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

cutting diameter: 290 mm saw band length: 4000 x 27 x 0,9 mm table height: -- mm cutting width: 300 mm band speed: 20 - 100 m/min load centre: 290 mm rotary disc high: 290 x 300 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 280 x 240 mm height of the workpiece: 1800 x 1900 x 1750 mm weight of the machine ca.: 2200 kg - Fully automatic electro-hydraulic band saw - electric feed unit - max. feed 520 mm - front control panel - electro-hydraulic material clamping - semi-automatic & automatic mode selectable - Miter cuts - Automatic operation up to 45° right - Miter cuts - Semi-automatic operation up to 60° right - stepless adjustment of the saw blade speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC lathe Okuma LB 3000 EX II Control: OSP-P300LA Year of manufacture: 2018 Turning length: 500 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Speed: 45 – 5,000 rpm Tool turret: 12 places (driven) Tool holder: BMT 65 Equipment: - Chip conveyors - Parts catcher - Touchsetter - Programmable sub-spindle - Bar feeder prepared - One Touch IGF - 3-Jaw Power Chuck Kitagawa

A complete beer keg cleaning and filling system Leifeld + Lemke, today IW-Anlagentechnik, is available. Throughput capacity: approx. 120kegs/h, keg/barrel formats: 20l/30l/50l, control system: Siemens S7, control system retrofit: 2008. 1) Keg exterior cleaning machine Schöttiger + Schäfer KHAH 240, max. cleaning capacity: 240kegs/h, operating cleaning capacity: 140kegs/h, drive rollers: 2, transfer rollers infeed/outfeed: 1/1. 2) Keg pre-cleaning machine Leifeld + Lemke KVR 300, year of manufacture: 1988, max. washing capacity: 180kegs/h, operating washing capacity: 120kegs/h, design: stainless steel, process: centering, residual emptying with air purging, mixed water pre-cleaning, waiting and soaking station, caustic cleaning and pre-filling. 3) Keg main cleaning and filling machine Leifeld + Lemke KFR 401, year of manufacture: 1988, filling line capacity: 60kegs/h, design: stainless  ...

Socad 300 x 8 mm (fixed angle) Capacity : 300 x 8 mm Fixed angle -- variable angle: fixed Electric motor (power): 7,5 HP Length : 1200 mm Depht : 900 mm Height: 1500 mm