138,294 used machines on RESALE, but how to find them? Machine Search
Display, display module, display panel, multifunction counter, controller, bidirectional counter, preset counter, digital counter -Manufacturer: IVO, Multifunction Digital Counter with 6-digit LED Display -Type: N 214.002AX01 -Item No.: 300949 -Dimensions: 130/110/H50 mm -Weight: 0.4 kg
Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.35 kW -Speed: 1500 rpm -Grinding discs: Ø 300 x 40 mm -Operating voltage: 380 volts
tapered roller bearings -Outer diameter: 80 mm -Width: 18 mm -Inner diameter: 40 mm -Weight: 0.5 kg
tapered roller bearings -Bearing type: Tapered roller bearing -Bore: Ø 90 mm -Outer diameter: 160 mm -Width: 32.5 mm
0: ja Working width: 3000 (3500) mm 0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tapered roller bearings -Bearing type: Tapered roller bearing -Bore: Ø 45 mm -Outer diameter: 85 mm -Width: 20.75 mm
tapered roller bearings -Weight: 7250 g -Outer diameter: 230 mm -Width: 40 mm -Inner diameter: 130 mm
Silo 3 m³ volume, payload 4200 kg, Net weight 600 kg Diameter 1800 mm, height 2400 / 3430 mm Spout height 1100 mm Outlet NW 250 Inspection/filling lid in silo roof NW 500 Silo butterfly valve Platform + Vertical Ladder
tapered roller bearings -Weight: 3780 g -Outer diameter: 180 mm -Width: 34 mm -Inner diameter: 100 mm
Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Piston tube outer diameter: Ø 135 mm -Stroke: 300 mm -Weight: 52 kg
Silo 3 m³ volume, payload 4.8 to, dead weight 980 kg Diameter 1750 mm, height 3450 mm Spout height approx. 1050 mm Outlet NW 250 Blow-in line, vent line Inspection cover NW 500 in silo cylinder Filling lid NW 500 in the silo roof Platform with vertical ladder
Key data: 3000 mm, 3 mm
with automatic hold-down device POS 100 E Control for Motorized Backgauge Single-angle stop 2 front support arms adjustable on linear rail Manual cutting gap adjustment 0.5 - 3 mm a sheet metal transport and stacking device is attached under the fence for transporting and depositing the cuttings Compressed air connection required Security fencing and light barrier available Adjustable back gauge 8 - 1000 mm Colour: grey/blue Total power requirement: 32 A with cutting gap adjustment without cutting angle adjustment Power: 3000x3.0 mm, 4.0 mm aluminum, 1.5 mm stainless steel Dimensions: 4000 x 1600 mm Weight: 4000 kg Machine number: 200034 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.
Center height: 300 mm Center width: 2000 mm Circumferential Ø: over bed 620 mm Spindle bore: 83 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 14 - 1000 rpm Feeds: longitudinal/flat 0.086-4.842/0.04-2.258 mm/rev Thread pitches: 0.5 - 28 mm Electrical connection: 380/400 V, 15 kW Space requirement: 3600 x 1200 x 1350 mm Weight: 3400 kg
mobile welding fume filters, welding fume extraction -portable -Extraction port: 1 -Drive: 1 kW -Volume flow rate: max. 170 m³/h -Quantity: 1 available -Weight: 20 kg
Chip extraction, filter extraction, bagging filter -Drive: 0.96 kW -Speed: 2800 rpm -Connection: Ø 50 mm -Connection: 380 V -Dimensions: 780/470/H340 mm -Weight: 135 kg
Up-down sander SAC 4R-300 Working width 300mm Working height 2.5-150mm 4 sanding units 2x Bottom unit 2×5.5kW 2x top chiller 2×5.5kW Sweeping brush top and bottom' 2×0.55kw Adjustable feed on the inverter 4-16m/min Electric grinding height adjustment Ability to work in-line with other machines CE Certified Year of production 2001
Machine vice, sturdy vice, drill press vice -Jaw width: 230 mm -Jaw height: 73 mm -Clamping depth: max. 300 mm -swivel -Weight: 70 kg
Machine vice, sturdy vice, drill press vice -Jaws can be moved depending on the workpiece geometry -Vise: rotatable -Jaw width: 255 mm -Clamping depth: max. 300 mm -Dimensions: 680/330/H180 mm -Weight: 95 kg
Type Vacuum tumblers Height 2100 mm Width 1900 mm Length 1800 mm Weight 1100 kg Capacity 300 l Power supply: 400V 50Hz 3N Main Material Stainless steel, acid-resistant Barrel Aeration Valve Yes, Solenoid Valve Variable speed control of the tumbler Smooth adjustment of the barrel speed Cooling jacket tumbler Yes, refrigeration unit built into machine design Loading Loading integrated into the machine
Veneer saw, veneer sawing machine, jointing cutting machine, fine cutting machine, fine cutting circular saw -Cutting length: 3000 mm -with extraction
Reflective light barrier, light barrier -11-30 V Price: per piece -Number: 8 available -Weight: 0.7 kg
max. width of grinding wheel: 125 mm diameter / bore of grinding wheel: 275 / 300 mm Flange taper: Reishauer Grinding disc flange for machine type Reishauer RZ 301 S For mounting ceramic grinding discs for tooth flank grinding - 125 mm wide, dimensions according to machine type Reishauer RZ 301 S 26 pieces available, price is per piece The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Reflective light barrier, light barrier -10-30 V DC Price: per piece -Quantity: 9x Available -Weight: 0.4 kg
two-arm drill, rotary drill, magnetic drill -Recording: MK2 -Nominal power input: 150 W -Connection: 230 volts -Transport case -Dimensions: 350/300/H100 mm -Weight: 5.5 kg
Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Tool radius: 10 mm -Dimensions: 45 x 190 mm -Length: 3000 mm -Weight: 240 kg
Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: approx. 150 bar -Liter flow rate: approx. 30 l/min -Drive: 3 kW 1400 rpm -Dimensions: 520/360/H340 mm -Weight: 65 kg
Wood chipping machine Low-noise low-speed machine with press drawer WL12/30 Hopper dimensions 1200x1200 Diameter of shaft 368mm 58 cutting blades in two rows 15/20mm Strainer Main motor 30kW Weight approx. 3200kg
Height 2100 mm Width 1800 mm Length 3900 mm Capacity 3000 l Total power 6 kW Main Material Stainless steel, acid-resistant Cooling jacket tumbler Yes, refrigeration unit built into machine design
Clamping plate with T-slots, plate field, welding table, welding table, plate boring mill -Width: 190 mm -Length: 300 mm -Height: 240 mm -Table: 140 x 300 mm -Groove width: 14 mm -Weight: 24 kg
Pipe sealing cushion, leak sealing cushion, sealing plate, pipe sealing -Pipe sealing cushions -Diameter: 300 mm -Number: 2 pillows available Price: per piece -Weight: 6 kg/piece
Punching force: 550 kN (e.g. punches 30 m in 16 mm material), with search device via foot switch for punching Cuts 350 x 13 mm or 230 mm on the flat steel shear Projection: 305 mm Two separate footswitches for the punching and shearing side, so punching and shearing can be done independently Support table on the punching side Range of tools is included in the price
geared motor, electric motor -Speed: 5000 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 9 mm -Protection class: IP 21 -Weight: 3 kg
Inductive sensor, electronic sensor Manufacturer: IFM -Product Type: ITB 3001-BPOG -Quantity: 4x Available Price: per piece -Weight: 0.2 kg
Capacitive sensor, electronic sensor -Manufacturer: IFM -Product Type: KD-3050-BPOG -Quantity: 4 available -Price: per piece -Weight: 0.5 kg
Offer 24272 Specifications: - Saw blade dimension 300 mm - Saw blade speed 2800 rpm - Cutting area - at 90° 160 x 20 mm - 100 x 80 mm - at 45° 100 x 40 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 400 x H 800 x D 600 mm - Weight approx. 80 kg - Table base W 900 x H 750 x D 500 mm
Inductive sensor, electronic sensor -Manufacturer: IFM -Product Type: IA-3010-BPKG -Number: 8 available -Price: per piece -Weight: 0.3 kg
Capacitive sensor, electronic sensor -Manufacturer: IFM -Product Type: KI-3015LFPKG -Number: 2x capacitive sensors available -Price: per piece -Weight: 0.2 kg
Inductive sensor, electronic sensor -Manufacturer: IFM -Product Type: IN-3004LBPOG -Quantity: 4x Available -Price: per piece -Weight: 0.2 kg
Inductive sensor, electronic sensor -Manufacturer: IFM -Product Type: IN5129 IN-3004-BPKG -Quantity: 2 available -Price: per piece -Weight: 0.2 kg
Capacitive sensor, electronic sensor -Manufacturer: IFM -Product Type: KG5004 KB-3020-BPKG/NI -Quantity: 2 available -Price: per piece -Weight: 0.2 kg
Standstill monitor, standstill monitor, underspeed monitor, standstill monitoring, safety relay -Manufacturer: ifm, standstill monitoring safety relay -Type: DA0001 A300/230VAC -Price: per piece -Number: 7 available -Dimensions: 55/80/H110 mm / box 150/110/H65 mm -Weight: 0.3 kg/pc.
Inductive sensor, electronic sensor -Manufacturer: IFM -Product Type: IIB 3015-BPKG -Quantity: 5 available -Price: per piece -Weight: 0.2 kg
- Horizontal sieves - 30 filter plates - Filter area : 6 m2 - Max, operating pressure: 6 bar - Capacity : 30 – 120 hl/h - With semi-automatic cleaning - Dosing pump was replaced in 2017 - Machine in good condition Dimensions: - Length : 1800 mm - Width: 850 mm - Height: 2000 mm
Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge -Type: HLP 230V 300W -Length: 155 mm -Diameter: 13 mm -Weight: 0.2 kg
Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 220 V /-10% 50/60 Hz -Output: D20-220 V 2.5-120 Hz 4.2 A 1.5 kVA -Weight: 6 kg
Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: AC1/3 PH 180-260 V/8.0/5.6 A -Output: AC 3 PH 0-240V/4.0A 0-1600Hz max. Price: per piece Quantity: 2 available -Weight: 2.5 kg
maximum number of results exceeded
please refine your search
