126,614 used machines on RESALE, but how to find them? Machine Search
Refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, filter dryer -Manufacturer: Alco, filter dryer -Type: ADK-305 -Pressure: up to 31 bar -Contents: 0.73 liters -Dimensions: Ø 80 x 265 mm -Weight: 1.4 kg
wire electrode, welding wire, welding wire -Gas wire electrode: roll started -Type: 308LSI Ø 0,8 mm -Dimension: Ø 300/100 mm -Weight roll: 5.9 kg
wire electrode, welding wire, welding wire -Gas wire electrode: roll started -Type: 308LSI Ø1.0mm -Dimension: Ø 300/100 mm -Weight roll: 2.7 kg
wire electrode, welding wire, welding wire -Gas wire electrode: roll started -Type: 308L Ø 0.8 mm -Dimension: Ø 300/100 mm -Weight reel: 9.3 kg
wire electrode, welding wire, welding wire -Gas wire electrode: roll started -Type: 308 Ø1.0mm -Number: 2 rolls available -Price: per roll, 1st roll 50, 2nd roll 30 -Dimension: Ø 300/100 mm -Weight reel: 7.1/3.2 kg
Power converter, power converter, controller, inverter, inverter, solar power converter -Manufacturer: SMA, Sunny Boy Photovoltaic Inverter -Type: SB 3300TL HC -PAC nom: 3000W -Dimensions: 470/205/H495 mm -Weight: 26.7 kg
Dirt traps, flanged dirt traps, filters, coarse or fine sieves, coarse filters, water filters -Manufacturer: AW Armaturen Wolff, Coarse filter, corner shape -Type: AW 603.0 PN 2.5 DN 300 GG25 603300 -Sieve plate, mesh size: Ø 2mm, material: stainless steel -Dimensions: 700/50/H533 mm -Weight: 163 kg
Hydraulic distribution block, hydraulic fitting, hydraulic T-distributor, hydraulic distributo -Hydraulic fitting: T-distributor 2 1/2 -Type: 3000-2 1/2-76.1 A3L -Number: 6x distributor block available -Price per piece -Total dimensions: 235/120/H160 mm -Weight: 17 kg/pc.
Hydraulic Shear HACO HS 3010 Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T
Cross-flow fan QLN 65/0012 A3-3038-33 tg (several available)
Hydraulic distribution block, hydraulic fitting, hydraulic T-distributor, hydraulic distributor, -Hydraulic screw connection: size 2 1/2 -Type: 3000-2 1/2-76.1 A3L -Number: 15x hydraulic screw connection available -Price per piece -Total dimensions: 105/26/H114 mm -Weight: 1.2 kg/pc.
Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor -Temperature sensor: screw-in temperature sensor -Measuring range: 0 to 300°C -Accuracy class: KL.1 -Measuring probe: Screw-in length 200 mm -Transport dimension: 330/260/H140 mm -Weight: 1.3 kg
Proximity switch, proximity sensor, position switch, socket cable -Manufacturer: Festo, socket cable ovp -Type: 30935 E413 -Voltage: 24V -Dimensions packaging: Ø 180 x 20 mm -Weight: 0.2 Kg
max. ram stroke: 2 - 300 mm groove width: 2 - 32 mm power capacity: 8 kW no. of strokes: 2 - 300 Hub/min throat: ca. 300 mm Max. installation height: ca. 450 mm automatic feeds: 0,01 - 0,15 mm work speed: 0 - 30 m/min return speed: 30 m/min weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2,5 x 1,5 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Automatic stretch-banding machine incl. linear blister feeder, blister grouping and counting device and banding unit. Control system: SIEMENS, type Simatic S7-300
2 x 300 hl storage tanks, Fabr. Schulz Bamberg, bobbin bottom tanks, 0.9 bar, coolable via 1 cooling zone in the Double jacket, insulated with 130 mm and stainless steel sheet, with manhole in the lower frame, sight glass in the upper frame, with spray head with pulled down cleaning line, outlet pulled forward, ladder bracket, Crane eyelets, height: 4.25m, Ø: 3.95m, built in 2003, expanded
Proximity switch, proximity sensor, position switch, socket cable -Manufacturer: Festo, socket cable ovp -Type:30945 UN13 -Voltage: 24V -Dimensions packaging: Ø 160 x 20 mm -Weight: 0.2 Kg
Clamping devices, clamping brackets, clamping clamps, clamping brackets, pipe clamping brackets, pipe clamps, pipe clamps -Pipe clamp: Pipe clamp with quick-release fastener -Clamping range: Ø 302 to 315 mm -Number: 5x clamps available -Price per piece -Dimensions: 325/95/H435 mm -Weight: 5.1kg/pcs
Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Manufacturer: GSL (German Standard Lift), hydraulic reservoir for the drive of work platforms -Additional parts: see photos -Dimensions: 300/295/H550 mm -Weight: 11.4 kg
X-axis: 3000 mm Y-axis: 800 mm Z-axis: 720 mm Rapid traverse: X/Y/Z axis: 50m/min Control: SIEMENS 840D Recording: SK40 Speed: 18,000 rpm Mileage: total approx. 5,000 hours (of which approx. 500 hours since the overhaul) Spindle motor: 321V - 116 A Work table: W 3500 x L 820 mm Dimensions: L 5250 x W 4046 mm Drives: SIEMENS The machine is a 5-axis machine, where the turntable is both vertical, as well as horizontally. - Subject to technical errors and prior sale. -
Cover for electric hand pallet trucks -Handover: in its current condition as inspected -Damage: see photos -Manufacturer: Linde Cover from electric hand pallet truck -Dimensions: Ø 300 x 200 mm -Weight: 1 kg
clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Surface: with grooves, without T-slots -Length: 3000 mm -Width: 2500 mm -Height: 300 mm -Transport dimensions: 3000/2500/H300 mm -Weight: 5220 kg
MEMBRANE SKINNER, MAJA, TYPE: EVM 3006 Technical description: Serial number: 42728 Power: 0,75 Kw, 380 V, 50 Hz Working widht: 545 mm Dimensions: 1000 x 600 x 1050 mm This machine has only been designed for use in the meat processing industry. The EVM 3006 type is a membrane skinning machine used to open and manually remove the membrane and skin from pieces of fish, pork, beef, poultry, veal, game and horse. Only round and flat products may be processed on open membrane skinning machines (e.g. knuckle joints or thighs)
Pipe grab, round grab, laying clamp, round material grab, scissor grab -Manufacturer: Tigrip, round material gripper type TRU 15/300 -Grip width: 80 to 300 mm -Load capacity: 1.5 tons -Number: 2x grippers available -Price: per piece -Dimensions: 700/220/H500 mm -Weight: 25 kg/pc.
Tandem cargo bike, load rollers, heavy-duty rollers, heavy-duty wheel, tires, solid rubber tires -Heavy-duty wheel: Double solid rubber tire -Tire type: 415/75-305 -Receipt: Ø 90 x 58 mm -Bolt circle: Ø 220 mm -Dimensions: Ø 415 x 215 mm Quantity: 1 piece available -Weight: 49 kg
Stn -; Kuipers Woudsend steriltank. • Holdup volume 3000 litre, bruto 3400 litre • Working pressure -1/5 bar. • Test pressure 7 bar. • Design temperature 0/159°C. • Year of manufacture 2001. • Net weight ±1100 kg • Including complete documentation of tank.
Specifications Cutting width: 3.8×48 mm Productivity: approx. 40 sheets (A4, 70g/m²) Cutting speed:- Year of construction: 1989 Safety level: P3 Power supply: 400 V / 2.2 kW
V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley 8 grooves SPC 300 8 -V-belt width: 22 mm -Receptacle: Ø132/145 mm for taper clamping bush TB 4040 (can be changed) -Dimensions: Ø300 x 215 mm -Weight: 44 kg
PLC control, digital input, digital input, input module -Manufacturer: mushroom, digital input Digital Input 24VDC -Type: P10-DI 304100 -Number: 7x module available -Price per piece -Dimensions: 250/230/H40 mm -Weight: 1.0 kg/pc
Servo drives from Indramat KDS 1.1-100-300-W1
300 m pallet rack Nedcon New goods, see pictures! A top shelving system from the major manufacturer NEDCON – this is a subsidiary of Voestalpine AG with headquarters in the Netherlands. Height 6.5 m Depth 110 cm, blue Beam length 2.7 m orange Carrier with ballast /compartment 3050 kg, Negotiation price: € 52.490,-- net from stock Offer consists of: + 126 pcs. frame pre-assembled, depth 110 cm, height 6.5 m + 750 racks, length 2.7 m, 3050 kg ballast/compartment +1500 pcs Suspension locks + 504 pcs concrete anchors Load plates, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Frame blue RAL 5019, infills galvanized. 2 m to 7 m heights in stock. Field load 12 tons, higher bay loads possible on request. Carrier orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. ...
PLC control, digital output -Manufacturer: Pilz, Digital output 24VDC/2A -Type: P10-DO 304110 -Number: 5 modules available -Price: per piece -Dimensions: 250/230/H40 mm -Weight: 1.1 kg/pc
Specifications: Capacity 300 to Stroke rate 35 strokes Plunger width 1000 mm Projection 450 mm Plunger stroke 20 - 140 mm Plunger adjustment 80 mm Engine power 30 hp Weight roughly estimated 18 tons
Lippert rising falling Incline belt conveyor GF 3050+800-750-600 RA2258 Technical data: Conveyor length (NL): 3850 mm ( 3050 mm + 800 mm ) frame width (NB): 750 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 105 mm, 430 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17 DR63LA/TH/Z Electrical data: 50Hz V380-500, kW 0,25 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 3850 ( 3050 + 800 ) Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentrala ...
PLC control, digital input, digital input, input module -Manufacturer: mushroom, digital input Digital Input 24VDC -Type: P10-DIF 304105 -Quantity: 1 piece available -Dimensions: 250/230/H40 mm -Weight: 0.9kg
PLC controller, digital input, input module, digital output, expansion module, extension rail -Manufacturer: Pilz, Extension Module par. Extension Rail -Type: P10-EPE 304096 -Quantity: 1 module available -Dimensions: 250/230/H40 mm -Weight: 0.8 kg
PLC control, digital input, digital input, input module, digital output, digital output, expansion module, extension module, extension rail -Manufacturer: Pilz, Extension Module par. extension rail -Type: P10-EPB 304091 -Quantity: 1x module available -Price per piece -Dimensions: 250/230/H40 mm -Weight: 0.8 kg/pc
We offer: Used collision protection corners 10 pieces, approx. 400 mm 22 pieces, approx. 300 mm at the warehouse 21698 Harsefeld. Per piece € 17,00 net plus 19 % VAT ex stock 21698 Harsefeld. Price only valid while stocks last. Subject to changes and errors. We are a professional provider – invoice with VAT shown.
sheet width: 0250 mm coil outside dia.: 1800 mm weight max. in kg: 2 x 3000 kg : 3,80 mm : 470 - 530 mm : 21 : 30 mm : 4 : 18,0 kW speed: 20 m/min power capacity: 18 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Decoiler AH 3000/2/250/ST with continuously variable drive, hydraulic central spread, Automatic post-spreading system, hydraulic pressure device, hydraulic swivel, Straightening machine RM 3025.4/21 with continuously variable drive, driven straightening rollers, manual Roller mill adjustment, quick-change device for the straightening rollers Belt loop control via ultrasound Material thickness / with material width 3.80 / 250 mm Material thickness / with material width 6.00 / 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
PLC control, central assembly, RAM, CPU, central device, positioning assembly -Manufacturer: pilz, positioning assembly 6 axes -Type: P10-MMC6 304518 -Quantity: 1x module available -Price per piece -Dimensions: 250/230/H40 mm -Weight: 1.1 kg/pc.
PLC control, central assembly, RAM, CPU, central device, central processing unit, compact device, compact CPU, processor -Manufacturer: mushroom, processor -Type: P10 CPU/RAM 304060 -Dimensions: 250/230/H40 mm -Weight: 1.3 kg
5 AXIS CNC WORKING CENTER BALESTRINI MOD. POWER 200 300 CE - USED - strokes: X-U 4000mm. Y 4000 mm. Z 700 mm. A 1000 ° C 400 ° (+/- 200 °) - n. 2 working tables 1400x3000 mm - n. 3+3 rails per each working table - n. 3+3 CSR supports per each table - head type CS 44 (n. 4 motors 7.5 kW each) - rpm 0/24000 g/min. with inverter - HSKC40/ER32 chuck - n. 2 inverters - wooden waste aspiration/cleaning device - Becker vacuum pump 100 mc - Electrical panel air conditioner - Num Axium control - T-CAS software - remote support - communication PC/CN TCP/IP - cabin + roof - CE rules - year 2010 - COMPLETELY RECONDITIONED
Inv. Num. : 7383 Type: AquaCut 3001.20WB Producer: MicroStep Created: 2016 Parameters: Control System: iMSNC Duty cycle: 35712 h Hours: 20646 h Work table length: 3000 mm Work table width: 2000 mm Equipment: Cutting head Drilling spindle
Inv. Num. : 5875 Type: KM 300-1400 C1 Producer: Krauss Maffei Created: 2001 Parameters: Laser ON: 70,000 h Clamping force: 300 t Screw diameter: 60 mm Injection capacity: 679 cm³ Injection mass: 618 g Min. height of clamping plate: 995 mm Min. width of clamping plate: 1050 mm Distance between uprights (horizontal): 630 mm Distance between uprights (vertical): 630 mm Ejector stroke length: 200 mm Maximum spraying pressure: 2000 bar Pump power: 45 kW Opening the mold: 820 mm Machine length: 6000 mm Machine width: 2100 mm Machine height: 2400 mm Injection weight: 12,500 kg Equipment: Robot Getecha Aschaffenburg GL 5 (built in 2001)
SECOND-HAND OLEO PNEUMATIC LATHE FOR TURNING AND SANDING OF SMALL WOODEN ELEMENTS LOCATELLI MOD. OMK 300 - control panel - automatic loader - Maximum working length 300 mm - min / max working diameter 8/80 mm - working stations: automatic loader turning with n. 2 gouges (roughing + finishing) 1° shaped knife 2° shaped knife unloading
Position computer, computer, control unit, robot controller, controller -Manufacturer: Pilz, AT-Industriecomputer -Type: P10-ATW VGA 304512 -Dimensions: 310/250/H165 mm -Weight: 4.4 kg
Module converter, electronic module, base unit, module carrier, subrack, basic carrier, basic mounting rail -Manufacturer: pilz, Basic Mounting Rail -Type: P10 BG-S 304006 -Dimension: 650/230/H40 mm -Weight: 2.8 kg
maximum number of results exceeded
please refine your search
