127,712 used machines on RESALE, but how to find them? Machine Search
I sell the Flader Orbitalbuerstmaschine. Model Quickwood Fladder System Working width 1060mm. Mechanically adjustable rotazion and feed speed. Cheap for rustic bushes and patina surfaces. Profiles possible. Made in Denmark Hansen - Hundebol AS
4-roll plate bending machine Mod. VRM NG HY 3000x40 Country of manufacture: Switzerland YOM: 1997 Brand: HAEUSLER AG Roll diameter 560/540/400 mm Roll thickness 40mm Roll length 3000mm Motor motor Power:55kW System: Hydraulic Voltage: 380V/3 phase Weight 45 000kg The quality of the machine is still very good.
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OT-6035 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable th ...
We are pleased to present an exclusive offer for two fully re-manufactured SGT-300 gas turbines with a mechanical drive configuration (8 MW) and one gearbox (1500 rpm, 50 Hz), originally manufactured in 2018. These units have been fully overhauled to zero hours, providing up to 48,000 operational hours, and were serviced in a Siemens-approved workshop. Key Features – 8 MW Mechanical Drive: • Power output: 8.4 MW • Efficiency: 35.3 % • Heat rate: 10,204 kJ/kWh (9,666 Btu/kWh) • Exhaust temperature: 490 °C (914 °F) • NOₓ emissions: ≤ 15 ppmvd • Fuel flexibility: Natural gas, liquid fuel, dual fuel Commercial Advantages: • Offer price including gearbox: on request • Ready for immediate deployment • Siemens-approved quality and service, zero-hour units This is a rare opportunity to acquire high-performance turbines ...
Travel distances: 415 x 340 x 355 mm [ X x Y x Z ] HSC Machine Number of axles: 3 Control: Heidenhain iTNC 530 Table size X: 470 mm Table size Y: 400 mm workpiece weight: 500 kg Tool changer: 30 - fold Rapid traverse: 30 m/min electronic handwheel
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-C2 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded construct ...
Locksmith SP 3000 Complete concrete block production plant Schlosser SP 3000 Lifting ladder Lowering ladder vehicle group Dry rack Packager Strapping Underlay boards Plastic More information on request. The plant is still in operation and can be visited in consultation with us,
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-CT-6022 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded cons ...
We offer Doka Eurex 30 top 300 Original Doka rental storage quality. Supports cleaned and checked. Doka Eurex 30 top 300, used - 41,90€/piece Doka Stacking Pallet 1.55m x 0.85m, used = 115.00€/piece The extra-durable ceiling support with impact protector The robust and durable Eurex 30 top slab prop impresses with a high minimum load capacity of 30 kN and complies with column class C/E according to the EN 1065 standard. The integrated impact protector reliably protects the stud tube from mechanical damage and significantly increases the service life of the steel tube support. If you have any questions, please call 0049 176 70044689 Mr. Becker Offer only valid while stocks last. Subject to prior sale. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Beck ...
Code: 0310 Brand: ESY - ITALY Model: TSI 300 - CE Standard Saw spindle moulder with tilting blade and scoring unit for carpentry workshops, custom-made furniture, wooden doors, window frames, kitchens, plastics, composite materials and various - CE Standard Technical data: Aluminium carriage length 2000 mm Support with metric rod with 2 reference stops Max blade diameter mm 250 Hole 30 Three-phase motor 2 Hp - 4500 rpm Scoring unit Tilting blade 0-45° Parallel guide width 800 mm 2-speed spindle moulder - 3500/7000 rpm - Max tool diameter 150 mm - Shaft diameter 30 mm Overall dimensions of assembled machine mm 2100 x 1900 x 1100 h Overall dimensions for transport mm 2100 x 1100 x 1100 h Weight kg 260
- DOCUMENTS AND MANUALS INCLUDED WE ORGANIZE SHIPPING AS WELL Max. concentricity errors at 300 mm: 0.008 mm RS232 / USB : interface Measuring range diameter (x) 310 mm Application range height (z) 320 mm Weight 90 Kg Max. tolerated errors (mechanical) 0.003 mm Max. tolerated errors (vision system) 0.005 mm Max. radius measurements < 5% - Max. angle measurements errors < 0.2° Max. concentricity errors adapter 0.002 mm Max. resolution 0.001 mm Max. manual moving speed 1 m/s INSERT CONUS MK5 IT WAS USED BY LATHE CNC DOOSAN PUMA
Made in Germany Saw blade size: 300 mm Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm 2 saw blade speeds: 40 / 80 rpm. Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug. free domicile within Germany
BOSCHERT GIZELIS G-CUT 3013 CNC hydraulic guillotine shears were built in 2021 in Greece by BOSCHERT GIZELIS.CO. The machine is used for precision cutting of sheet metal made of, among others, ST42 steel and stainless steel with a maximum thickness of 13 mm. It is also possible to cut thicker materials if these have a lower tensile strength. The machining process is performed by means of precise, hardened cutting knives with automatic adjustment of the gap between blades. The positioning of the material is facilitated by a work table with integrated balls on which the workpiece goes directly under the cutting line. Along the cutting line, in turn, hydraulic material hold-downs are used to ensure that the sheet is held firmly in place during machining. The G-CUT 3013 is offered with a number of state-of-the-art systems that expand the machining possibilities and make daily work easi ...
planetary gearbox, 582 32 025, n1 3000rpm, i=10,8, 5,7KW, Atlanta, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, Technical specifications: - 5.7 kW, n1 3000 rpm, i = 10.8 Connection on motor side: - Shaft D40 mm, centring D162 mm, pitch circle D184 z=4 Output side connection: - Bore D24 mm, centring D130 mm, pitch circle D165 mm z=4 Design without additional base plate 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of ...
300 t , Stand distance 1.800 , with rope passage , Installation height 1.000 , Table 1.800 x 1.000 , Ram 1.800 x 1.000 , Hub 600 , Rapid traverse to + From 414 mm/sec. , ram speed 10 - 50 mm/sec. , retraction force 380 kN , table cushion 800 kN , 90 kW , Weight 43.000 kg , ground-level installation
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-CT-6022 6kW / VF1530-6000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 6.0kW - Energy requirements: 30.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 25.0mm, maximum thickness 30.0mm - Stainless steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Aluminum: Recommended thickness 12.0mm, maximum thickness 14.0mm Structure parts The machine is very stable thanks to its welded construction based on massive leg ...
planetary gearbox, 582 32 027, n1 3000rpm, i=10,8, 5,7KW, Atlanta, mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, - has very slight storage marks, no effect on function - The gearbox was open stored and contaminated with oil mist, which was very difficult to clean. Technical specifications: - 5.7 kW, n1 3000 rpm, i = 10.8 Connection on motor side: - Shaft D40 mm, centring D162 mm, pitch circle D184 z=4 Output side connection: - Bore D38 mm, centring D180 mm, pitch circle D215 mm z=4 Design with additional base plate 23mm thick 6 months warranty We give you 6 months warranty for these goods from t ...
Kirsch / Iveco Emergency Power System Diesel Generator Power Generation Generator Container Operating hours generator: 411 hours Kirsch Power Generation Unit Type: D 300-4 IWE Year of construction: 2007 Rated power: PRP 240 kW Rated voltage: 400 V Rated current: 433 A Nominal frequency: 50 Hz Rated speed: 1500 rpm/min Weight: 2530 kg Iveco Engine Motor Model: F3BE0685CBXXX Displacement: 12.9 liters Specified kW (BHP): 330 (442,50) at 1800 rpm Fuel consumption at specified power: 245mm^3/stroke
planetary gearbox, 582 32 025, n1 3000rpm, i=10,8, 5,7KW, Atlanta, used Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - the part was dismantled from a machine, Technical specifications: - 5.7 kW, n1 3000 rpm, i = 10.8 Connection on motor side: - Shaft D40 mm, centring D162 mm, pitch circle D184 z=4 Output side connection: - Bore D24 mm, centring D130 mm, pitch circle D165 mm z=4 Design without additional base plate Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 ...
Standard configuration Machine ? Stable C-frame for easy access ? Coordinate guide for high-precision machining ? Linear magazine, 3 clamps ? Maintenance free drives ? Repositioning device with programmable presser foot ? Parts chute 500 x 500 mm ? Good parts container ? Swarf bucket Cutting head ? Hydraulic punching head ? Single tool adapter ? 360? rotation of all tools ? Programmable presser foot ? Tool length compensation ? Spray lubrication for punches ? Vacuum slug removal ? Forming Control ? Open control system based on BOSCH ? Control panel with TFT colour screen 12.0? ? Program management ? Online-help ? Integrated technology data ? Diagnostic functions ? Teleservice Programming ? Machine-oriented shopfloor programming Data transmission ? Disc drive and network connection Safety ? CE marking ? Light barriers ? Rapid hydraulic shutdown Additional equipment ? Function Mul ...
Standard Configuration ? Closed machine frame with integrated laser unit ? Laser unit: CO2 laser TLF 5000, radio-frequency excited, chiller, logbook function Laser ? Automatic pallet changer and longitudinal conveyor for small parts / slag ? Drives: Gantry drive in combination with linear direct drives ? Laser power control ? HI-LAS high pressure cutting ? Plasma sensor system PSS ? PCS Process Control System ? DIAS capacitive height regulation ? High-speed processing with SprintLas ? ContourLas for producing small holes ? Programmable cutting gas pressure setting ? Automatic nozzle cleaning ? Laser cutting head with 5? lens and laser cutting head with 7.5? lens ? Cutting head quick-change device ? Automatic sheet edge detection ? Positioning laser diode ? Programmable power cycles ? Microweld ? Automatic focus adjustment AutoLas Plus ? Oil spray device for reliable thick plate machini ...
Key data: 600 KW, 750 kVA, 230 V
2 x 300 kW Cummins Natural Gas Gensets in Soundproof Container, 600 kW Total, Steam Heat Recovery For sale: containerized natural gas power generation package consisting of 2 x 300 kW Cummins gas gensets installed in one soundproof container, including synchronization system for parallel operation and steam-type exhaust gas heat recovery system. Total electrical output in parallel operation: 600 kW. Offered manufacturer package is based on Cummins 15NG-330 gas engines, Leroy-Somer alternators, Woodward ignition/speed control, and DEIF AGC150 controller. Main technical data Quantity: 2 units Rated power: 300 kW each Total power in parallel: 600 kW Fuel: Natural gas Engine: Cummins 15NG-330 Engine rated power: 330 kW Cylinders: 6 Displacement: 14.5 L Rated speed: 1500 rpm Alternator: Leroy-Somer TAL-A46-H Voltage: 230/400 V Frequency: 50 Hz Powe ...
Year of manufacture: 2013 CNC Controller: FAGOR 8055TCO Capacity Distance between centers (mm): 3000 Height between centers (mm): 300 Height between centers from the ground (mm): 1200 Grinding diameter (mm): ø 595 Max. workpiece weight between centers (kg): 2000 Max. Workpiece weight with tool (kg): 200 Table (Z-axis) Maximum travel (mm): 3350 Rotating table plate ±5° Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Grinding carriage (X-axis) Maximum travel (mm): 500 Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Resolution (mm): 0.0005° Grinding head Left grinding wheel diameter (mm): 600 Peripheral speed (m/s): 45 Workpiece head Spindle speed (rpm): 9 ÷ 250 CM taper: 5 Spindle type: 8" Tailstock Type: Manual handwheel Spindle taper (cm): 6 Maximum spindle travel (mm): 60 Quill diameter (mm): ...
Loading device LoadMaster including loading station with fanning magnets Loading Sheet size: 3000 mm x 1500 mm Min. sheet size : 1000 mm x 1000 mm Max. sheet thickness: 25 mm Max. sheet weight: 900 kg
Standard Configuration ? Closed machine frame with integrated laser unit ? Laser unit: CO2 laser TLF 5000, radio-frequency excited, chiller, logbook function Laser ? Automatic pallet changer and longitudinal conveyor for small parts / slag ? Drives: Gantry drive in combination with linear direct drives ? Laser power control ? HI-LAS high pressure cutting ? Plasma sensor system PSS ? PCS Process Control System ? DIAS capacitive height regulation ? High-speed processing with SprintLas ? ContourLas for producing small holes ? Programmable cutting gas pressure setting ? Automatic nozzle cleaning ? Laser cutting head with 5? lens and laser cutting head with 7.5? lens ? Cutting head quick-change device ? Automatic sheet edge detection ? Positioning laser diode ? Programmable power cycles ? Microweld ? Automatic focus adjustment AutoLas Plus ? Oil spray device for reliable thick plate machini ...
Standard Configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Torque drive in combination with direct linear drives ? Enclosed beam delivery system ? Chiller ? Automatic pallet changer lengthwise installation ? Longitudinal conveyor ? 17 touch screen ? Working area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? PlasmaLine Trumpf Laser ? CO2-Laser TruFlow 3200 including NitroLine, with optimized Standby Modus ? beam tube purge with nitrogen ? Maintenance-free radial turbine blower ? Radio-frequency excitation ? Laser control TASC 3 ? Laser power control ? Logbook function Laser ? Laser cutting head ? One cutting head strategy ? LensLine with status check ? Laser cutting head with 250 mm lens ? Universal quick-change device (UTI) ? ControlLine: Height regulation and sheet edge detection Contr ...
The brewing system has a 470 L wort kettle and a 500 L lauter tun. The heating is electric with 21 kW heating power. The heating is in the walls and floor ordered. The brewhouse yield is max. 74%. The original gravity can be brewed up to 18 degrees Plato . Two-vessel brewhouse, consisting of a mash tun/wort kettle combination and a lauter tun/whirlpool vessel. Under the mash tun is a highly efficient pump with which the wort is mixed and passed between the devices by means of hoses. can be transported here. recipe management, automatic mashing program, timer function and manual Operating modes are operated via a control system, which has a 7-inch touch display. The built-in plate heat exchanger for re-pouring preparation makes it possible to use tap water directly to the required temperature and by means of nozzles in the lid of the lauter tun directly and gently. No addition ...
Standard configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Torque drive in combination with direct linear drives ? Enclosed beam delivery system ? Single cutting head strategy ? Chiller ? Automatic pallet changer in longitudinal direction ? Conveyor belt for small parts / slug ? 17 Touch screen ? Work area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine Trumpf Laser ? CO2 laser TruFlow 5000 with optimized standby including beam guidance ventilation with N2 ? Maintenance-free radial turbine blower ? Radio-frequency excitation ? Laser control TASC ? Laser power control ? Logbook function laser Cutting head ? Lens cutting head with 250mm focal length ? Universal quickchange device for cutting head (UTI) ? LensLine with status check ? ControlLine: automatic height contr ...
Standard configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Torque drive in combination with direct linear drives ? Enclosed beam delivery system ? One cutting head strategy ? Chiller ? Automatic pallet changer, lengthwise installation ? Longitudinal conveyor ? Ergonomic control panel with Touchscreen ? Working area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine Trumpf Laser ? CO2-Laser TruFlow 3200 with optimized standby ? Maintenance-free radial turbine blower ? Radio-frequency excitation ? Gas mixer (integrated) ? Laser control TASC ? Laser power control ? Logbook function Laser Laser cutting head ? Laser cutting head with 250 mm lens ? Universal quick-change device (UTI) incl. bus connection ? LensLine ? ControlLine: Height regulation and sheet edge detection ...
Key data: 2300 KW, 10500 V
High-efficiency industrial gas generator set based on the proven MWM TCG 3020 V20 engine platform. Designed for reliable continuous operation in power generation and combined heat and power (CHP) applications. The unit offers high electrical efficiency, long maintenance intervals, and excellent fuel flexibility, making it suitable for natural gas, biogas, landfill gas, and other gaseous fuels. Key Specifications • Engine model: MWM TCG 3020 V20 • Configuration: V-20 gas engine • Electrical output: up to 2300 kW • Rated speed: 1500 rpm • Frequency: 50 Hz • Fuel type: Natural gas / Biogas / Landfill gas • Electrical efficiency: up to 45 % • Total efficiency (CHP): up to 87 % Technical Highlights • Proven MWM TCG 3020 series engine platform • Long service intervals (up to 80,000 operating hours overhaul interval) • Optimized for high-effi ...
Standard configuration Basic system incl. peeling device and measuring device for sheet thickness Max. sheet weight 900 kg Loading Max. sheet size 3000 x 1500 mm Min. sheet size 1000 x 1000 mm Max. sheet thickness 25 mm Unloading Min. part size 150 x 150 mm Max. sheet thickness 20 mm ? Installation symmetrical ? WITHOUT loading station
Standard configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Torque drive in combination with direct linear drives ? Enclosed beam delivery system ? One cutting head strategy ? Chiller ? Automatic pallet changer, lengthwise installation ? Longitudinal conveyor ? Ergonomic control panel with Touchscreen ? Working area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine Trumpf Laser ? CO2-Laser TruFlow 5000 with optimized standby, purged with nitrogen and LensLine ? Maintenance-free radial turbine blower ? Radio-frequency excitation ? Gas mixer (integrated) ? Laser control TASC ? Laser power control ? Logbook function Laser Laser cutting head ? Laser cutting head with 250 mm lens ? Universal quick-change device (UTI) incl. bus connection ? ControlLine: Height regulation and ...
JOTES SPD 30B surface grinding machine was built in 1978 in Poland by PONAR-JOTES Łódź. The machine, designed for precision grinding of workpieces, is an excellent choice for professional production applications. Workpieces placed on a large magnetic plate or directly on the work table are machined by means of a spindle with a grinding wheel which moves transversely and vertically. The grinding wheel, driven by an electric motor, reaches a maximum speed of 26 m/s. The work table, on the other hand, is hydraulically driven and allows stepless adjustment of the feed rate in a range of 2 to 30 m/min. Changing the table’s travel direction is done automatically using stops or manually by switching the appropriate lever. The SPD 30B magnetic surface grinding machine weighs 5000 kg. Technical specifications of the JOTES SPD 30B grinding machine - work table surface (L x W): 1000 x 3 ...
FS Elliot Centrifugal Compressor with inverter starter = 1 unit Model : P300-300 Brand/ Manufacturer : FS Elliot (FSE) Air Quality : Oil-Free (ISO 8573-1 Class Zero) Compression : Three Stages Compression Cooling Method : Water Cooled Motor Power : 415V, 50Hz, 3 Phase Main Motor : TEFC, 415V, 3PH, 50 Hz Motor Type : Inverter type; brand WEG; IE3 Motor Starter : Inverter type, Free Standing Inverter Drive Starter without a line synchronous bypass system. designed and supplied by manufacturer, cable connection from starter to motor shall be supplied by customer or can be quoted separately. Shaft Power : 264.93 hp or 198.7 kW (} 4%) Delivery Air Flow Rate : 40 m3/min (} 4%), based on cooling water inlet temperature 32°C, inlet air temperature 35°C, Relative Humidity 80%. Discharge Pressure : 6.0 barg. Discharge Temperature : 37.3°C Vibration Sensors : 2 sets, Low and H ...
Standard Configuration Machine ? Closed machine frame ? Integrated cabinet ? Motion unit for high precision processing ? Torque drive in combination with direct linear drives ? Chiller ? Automatic pallet changer lengthwise installation ? Enclosed beam delivery via laser light cable ? Integrated electrical cabinets with inside light ? Wide longitudinal conveyor ? Ergonomic control panel with Touchscreen ? Work area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine ? Automatic nozzle cleaning TRUMPF laser ? External solid state laser TruDisk 4001 with 1 fiber optic cable laser output ? Stimulation via pump diodes ? Laser power control Cutting head ? Universal cutting unit ? One cutting head strategy ? Protection glass to avoid lens contamination ? Online protection glass monitoring ? ControlLine Control ? Easy shop floor programming ...
WEGENER BM 301 plastic bending machine was built in Germany by Wegener International GmbH. The machine was regularly maintained and upgraded throughout its service life. In 2022, a general overhaul was carried out at the machine manufacturer. WEGENER BM 301 is the perfect choice for precision forming of thermoplastic sheets made of, among others, PVC, PC/ABS and PMMA with a maximum thickness of 15 mm and a width of 3050 mm. The machining process is performed by means of heating elements in the form of a lower flat strip and an upper V-shaped strip, which heat the material at a controlled temperature to a plastic state. The material is then bent to the desired angle between 0° and 110°. The use of the highest-quality heating elements ensures efficient and even heating of the material along the bending line. They are moved manually along hardened steel rollers. Repeatable positioni ...
Control Other GDW Spindle Passage [mm] 43 Rotary diameter. [mm] 300 Turning length [mm] 650 Main spindle: Belt spindle technology Speed 4,500 rpm Power (max.) 7.5 kW Torque (max.) 80 Nm Spindle Passage 43 mm Workpiece clamping 3-jaw chuck, Röhm ZS ø160 mm Tool carrier (X/Z): Technology slide with 4-cavity turret Tool holder ready size 1 Travel in X/Z 170/650 mm Rapid traverse in X/Z 6 m/min Tailstock: Technology Manual tailstock with handwheel Quill stroke 110 mm Quill ø 50 mm Quill Cone MK3 Equipment/accessories: Chip disposal chip tray Coolant Management KSS Pump Tool holder Div. gebr. Parat Holder Further accessories 4-jaw chuck ø160 mm, various used Baking
Round table, round dividing table, dividing head, dividing head -Table: Ø 300 mm -Bore center: Ø 62 mm -Height: 115 mm -Groove: 16 mm -Dimensions: 460/420/H115 mm -Weight: 61 kg
Electric chain hoist, crane, indoor crane, assembly crane, electric lift, chain bag chain hoist -Chain bag: for crane chain hoist -Dimensions: 720/300/280 mm -Weight: 6.3 kg
Meat cutting machine with program control different filing patterns Repaired
Wire feed case for inert gas welding device, shielding gas device, wire feed case -Manufacturer: Ess wire feed case, water-cooled -Type: DVK 300-3 -Accessories: hose package -Dimensions: 750/410/H430 mm -Weight: 32 kg
Alignment ruler, alignment rail, steel ruler -Angle: 90° -Dimensions: 3000/100/H15 mm -Weight: 28 kg
Cable duct, cable tray, cable channel, cable route, cable profile, protective conduit, protective profile -Cable duct: 61 pieces -Dimensions: 3000 x 50 x 37 mm -Material: Steel, galvanized -Price: complete -Dimensions: 3000/820/H120 mm -Weight: 212 kg
The machine is available in stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-C2 4kW IPG / VF1530-4000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 4.0kW - Source brand: IPG - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 22.0mm, maximum thickness 25.0mm - Stainless steel: Recommended thickness 10.0mm, maximum thickness 12.0mm - Aluminum: Recommended thickness 8.0mm, maximum thickness 10.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by ...
maximum number of results exceeded
please refine your search
