126,707 used machines on RESALE, but how to find them? Machine Search
Centrifugal bucket set for steel gravel blasting machine, reinforced version GISAG PDS 2500 Dimensions(one bucket): 160 x 50 x 28 mm Thickness without side margin: approx. 10 mm Bore: Ø 11 mm spare part e.g. for GISAG PDS 2500/3 ! slingshot blade set consists of 8 pieces !' New !' Dimensions: 240 x 160 x 50 mm
Auction-ID: A1-45889-2859
Radiator with blower, cooling fan, oil cooler EBM W2E 250 AB05 01 ( W2E250AB0501 ) radiator : 250 x 240 x 80 mm fan: Ø 250 mm 0,0,0,000 mm /br /br /0,0 135 KW 2500 rpm 220 V Dimensions: 500 x 360 x 200 mm
Contact pressure gauge, pressure gauge with switching contact WIKA 212.20.100 Cont. 821.111 0 to 250 bar Ø 100 mm with diaphragm seal (approx. 1500 mm cable) New! Dimensions: 120 x 60 x 55 mm
Rubber spring buffer, ram buffer, crane Rubber buffer PAGUS TGL 35268 ( TGL35268 ) diameter: 250 mm width:200 mm screw to screw 150 mm fastening screws: M20 New ! Dimensions: 250 x 250 x 240 mm
Coolant tank with pump ERNAULT-TOYODA 250 liters (e.g. b. for Ernault-Toyoda HES52) pump 120 l/min 3.5 bar 1.1 kW 220 / 380 V used, tested ! Dimensions: 1400 x 1100 x 750 mm
Pressure transmitter REXROTH HM20-20/250 R901342027 Measuring range: 0 - 250 bar U(signal): 0.1 - 10 V DC U(supply): 18 - 36 V DC used, tested ! Dimensions: 130 x 22 x 20 mm
Dematic conveyor system Accumulating roller conveyors Roller conveyor 3000-600-540, 750 RA2290 Manufacturer: Dematic Type: Drive unit accumulating roller conveyor Year of construction: 2012 Condition: good (used) Roller width (RB): 540 mm Element length: 3000 mm, optionally shortenable Stowage space size: 750 mm Roller pitch: 62.5-125 mm variable Drive types: Head and center drive Weight of conveyed goods: up to 30 kg Technical data: SEW geared motor 380V RA2290.1 Manufacturer: Dematic Type: Accumulation roller conveyor extension module Year of manufacture: 2012 Condition: good (used) Roller width (RB): 540 mm Element length: 3000 mm, optionally shortenable Stowage space size: 750 mm Roller pitch: 62.5-125 mm variable Drive types: Overdrive from RA2290 (necessary) Weight of conveyed goods: up to 30 kg Optionally available e.g: SEW Eurodrive / Movimot frequency inverter Supports Sid ...
Clamp Set, Clamp, Claw Clamp M/S BOC EDWARDS ISO63-250 C10007090 Clamp set consists of 8 clamps ! New !' Dimensions (single clamp): 60 x 24 x 30 mm Dimensions: 180 x 130 x 40 mm
CNC Flame Cutting Machine BACH APOLDA AC 2500 Year: 1993 Control: MESSER GRIESHEIM KS20A Dimension : 3800 x 2000 mm 2 burners oxygen, propane without table ! Rails 8 meters (2 x 8 meters) used, tested ! Documents available. Dimensions : 3800 x 2000 x 2000 mm
CNC Flame Cutting Machine, Plasma Cutting Machine BACH APOLDA ACW 2500 Year: 2001 Control: NBS 400 Dimensions of System: 4100 x 1900 x 1500 mm without table: rail 8 meter (2 x 8 meter) 2 oxy-fuel cutting heads 1 plasma cutting head MANNSFELD PGS 50 74 kVA Bj.: 1988 without table ! used, tested ! Dimension plasma equal: 1600 x 660 x 1500 mm
Equipped with material clamp, With both side roller tracks each 2 meters.
Center height 165 mm, center width 635 mm, spindle bore approx. 40 mm, power 2.2 kW
3-jaw chuck, three-jaw chuck with outer jaws PAGUS outer Ø: 250 mm bore Ø: 80 mm flange: 111 mm Bolt circle:134 mm height with jaws: 123 mm chuck number: 72 295 jaw number: 12 295 short cone Dimensions: 250 x 250 x 123 mm 3 Extra Jaws
Hobs, tooth gear hob for hobbing machine WMW / PWS Type K Module 2 2503 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 62 x 62 x 48 mm
Polishing bench with 2 polishing brushes Grinding wheel diameter 250 mm Number of stations 2 pieces Connection voltage 230 V Speed 2850 rpm Total power requirement 1.5 kW Machine weight approx. 25 kg Dimensions L x W x H 0.65 x 0.32 x 0.35 m Condition: never used / new (5)
Knife sharpener with variable speed Grinding wheel 250 x 50 x 12mm, Gritt 220 Leather disc 200 x 30 x 12mm Grinding wheel diameter 250 mm Connection voltage 230 V Speed range infinitely variable 90 - 180 rpm Machine weight approx. 18 kg Dimensions L x W x H 470 x 300 x 440 m Condition: never used / new (5)
X-axis: 2500mm Y-axis: 920mm Z-axis: 820mm Machine is equipped with: - chip conveyor - through spindle coolant 40 bar - coolant filtration system - 30 position ATC
Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available
Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available
Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available
Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available
Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available
Several transformers for sale: Technical data can be found on the nameplate. The transformers are all electrically tested, (transmission-insulation-resistance-etc.) We have many more transformers in stock, also some 10,000-1000V transformers are available
GUILLOTINE REEL SLITTER 60 T, Working width 2.000 mm, Working height 1250 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of, conveyor belt, fork-lift tray to handle the reel before and after splitting, spare knife, Force: 60 T, working width: 2.000 mm. 78.74, working height: 1.250 mm.
GUILLOTINE REEL SLITTER 60 T, Working width 3.500 mm, Working height 1.250 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T, installed power - used power in work: about 60-65% : 15
GUILLOTINE REEL SLITTER 60 T, Working width 3.000 mm, Working height 1250 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T
Allestimento: Heating/cooling, Insulation, Overpressure,Products: Van Hool,Stato: used,Volume / Litri : 25.000,Pressione massima: 3,0,Tipologia: horizontal,Piedi : Rack,Heating/cooling (filter bar): present,Pressione massima ammissibile: 3.0,Coibentazione : present,Altezza Totale: 2.900,Larghezza Totale/mm: 2.550,Lunghezza Totale/mm: 6.060,anno di costruzione: 2014,Documentazione tecnica: Certificate of acceptance, Chiusino superiore : on the container,targa identificativa: Yes, Scarico : present,Osservazioni: material, in contact with the product: 1.4402 (Aisi 316L) Frame, Fe (lacquered)
ELBOR MAG - Wire Electrode Type SG-3 Condition Mint EN ISO 14341-A- (2011) G 46 4M21 4Si1/G42 3C1 AWS A5. 18-05: ER70S-6 Diameter 1.0 mm 250 kg - Drum approx. 230 kg still available in the barrel
Allestimento: Insulation,Stato: used,Volume / Litri : 250.000,Design: upright,Standing form: Frame,Insulation: present,Insulating sheath: riveted,Insulation material: PU foam,Material insulating jacket: Aluminium,Insulation thickness: 150,Diameter outside: 4.550,Total height: 22.950,Wall thickness underbody: 15,Wall thickness cylinder: 5,Technical documents: various documents,Type plate: Yes,Discontinued: available,Last use: Brewery,Material in contact with the product: V2A 1.4541 ( AISI321),Ground Bearings: No,Power Disturbers: No,Ground Bearings: No,Power Disturbers: No
Replacement column for IDRA 2500, D300mm x 7360mm, (1), 181091, Strate/Idra, overhauled Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 2500, D300mm x 7360mm, trapezoidal thread TR 300 x 10, 4082 kg Refurbished! The column was overhauled by the company Strate, is in the original packaging and is in an immediately usable, top condition. We store them in a dry and thermally insulated room. The column can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300
Replacement column for IDRA 2500, D300mm x 7115mm, (2), 210779, Strate/Idra, overhauled Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 2500, D300mm x 7115mm, trapezoidal thread TR 300 x 10, 3944 kg Refurbished! The column was overhauled by the company Strate, is in the original packaging and is in an immediately usable, top condition. We store them in a dry and thermally insulated room. The column can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300
Replacement column for IDRA 2500, D300mm x 7115mm, (3), 110850, Strate/Idra, new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 2500, D300mm x 7115mm, trapezoidal thread TR300 x 10, 3944 kg New! The column was manufactured by Strate, is in its original packaging and is in the best condition and ready to use. We store them in a dry and thermally insulated room. The column can be visited, tested and picked up from us at any time. We will also be happy to send you a sketch of the construction or deliver the goods to your address. Attention! We offer various columns, adjusting nuts, spar nuts and 2-piece nuts: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300
Gasket set suitable for Hammer HM 200-250, also other gasket sets such as for HM300 / HM 1300 / HM 150 / HM250 available!
Clamping Force: 300 ton // Shot Weight (Max): 476 g
Clamping Force: 200 ton
Clamping Force: 350 ton // Shot Weight (Max): 694 g
Clamping Force: 420 ton // Shot Weight (Max): 1555 g
Clamping Force: 220 ton // Shot Weight (Max): 625 g
- Producer Cefla - Type TN 2250 - Length 2.250 mm - Belt with 1.360 mm - Overall width 1.600 mm - Year of construction 2008 - FU-Regelung für Feed speed - Feed speed ~ 2 - 8 m/min - frequency converter on site - Location, in stock - Voltage / HZ 400 / 50 - Motor power 0,55 kW - Commodity code 8428330 - Weight 270 kg
The Trepko XPG 40 model is a Forming, Filling and wrapping machine for Aluminium foil or Parchment paper, this can be used to fill various products such as Butter, Margarine, Lard, Etc. The machine was fully refurbished in 2017 and it was never put in production now it’s with us in stock, we have made the full check over and is in perfect working order. The line consists also a Cintex Metal detector out feed conveyor ., Machine: Trepko XPG 40 , Capacity: up to 80 packets/min , Pack size: 100-300 grams, Dimensions: 100mm x 75mm x 35mm (250grams ) , Product: Butter, margarine, etc., Wrap material: Aluminium foil or parchment paper in reels, Product Feed: Hopper with Screws , Photocell: Foil Centering unit , Weight: 2.000 kg (gross), Machine Dimensions: Approx. 200 x 150 x 200 cm (l x w x h), Electricity: 2,2 kW
Equipment: Heatable/coolable, Insulation, Agitator,Manufacturer: Ullmann (ULLCO),Condition: used,Volume: 25,000,Design: upright,Stand: feet height adjustable,Number of feet: 4,Heating/cooling (filter bar): available,Volume double jacket: 510.0,Max. permissible Operating overpressure: 3.0,Temperature control cylinder: double jacket,Temperature control underbody: double jacket,Insulation: available,Insulation jacket: hermetically welded,Material insulation jacket: stainless steel,Diameter inside: 2,800,Total height: 6,300,Manhole / dome: in the top floor ( 430),Type plate: Yes,Equipment: crane eyelets,Outlet: available,Outlet :
Manufacturer: Inox Maurer AG,Condition: used,Volume: 25,000,Max. max. Operating temperature : 50,Design: upright,Stand shape: feet,Number of feet: 3,Diameter inside: 2.600,Total height: 5.900,Wall thickness shelves: 6.9,Wall thickness cylinder: 6,Technical documents: Drawing, various documents,Manhole / dome: in the cylinder, in the top floor,Type plate: Yes,Equipment: Crane eyelets,Outlet: available,Note: Manhole cover plated,Remarks: Test truck + 4 bar,Last purpose: Pharmaceutical chemistry,Material in contact with the product: V2A 1.4301 (AISI304),Material Feet: Steel,Bottom Bearings:
maximum number of results exceeded
please refine your search
25 € 
