137,863 used machines on RESALE, but how to find them? Machine Search
Key data: 600 kN, 132 g/PS, 35 mm
Arburg 320C-600-250 Injection Moulding Machine Number: 238 Availability: in stock Year of production: 2008 Producer: Arburg Screw diameter[mm]:35 Injection weight [g]: 132 Injection pressure [bar]: 1820 Gap spacing [mm]: 320×320 Panel size [mm]: 446 x 446 Min. Form Height [mm]: 200 Control Type: Selogica Tongue: German Installed power [kW]: 23.9 Working hours [h]: 76550 Weight [kg]: 2330 Dimensions [mm]: 3500×1500 Feed hopper: NO Robot Nest: Yes Core String: 1x
Engine serial nr.: NYJ00612, Generator set serial nr.: K7F00768, Generator serial nr.: 74B0212, , Including parts. In total 9 Colli/Parts ± 19.020 kg; Gross weight [kg]: 16080; Engine: Caterpillar 3516B; Accessories: Control Panel
Perkins 1100 Series 1104D-44TA, 83.0 kW / 111.3 hp @ 2200 rpm; Power [PS]: 113; Transport weight [kg]: 567
Key data: 2500 , 60
ENGEL 250T injection molding machine Reference : ES1800/250HL Clamping force : 250T Year : 1999 Working hours : 73 655 h Screw diameter : 60 mm Injectable volume : 763 cm3 Injection pressure : 1969 bars Platen dimensions : 1150 x 900 mm Mold thickness (min/max) : 350 mm x 850 mm Dimensions : 6,92 m x 2,08 m x 2,14 m + with 1 SEPRO robot
Kemper Ribbon Rounder Type SBR 2500 with 2 flours with light barrier Effective length 250cm, active channel inclination adjustable Speed adjustable Weight range approx. 400 - 2,800 g Lstg. up to approx. 2,000 pcs./h Stainless steel cladding, mobile
swing diameter:200 mm weight of the machine ca.:15 t Distance between tips:832,5 mm turning length:380 mm with chip conveyor and belt filter press, infeed and outfeed belt 2 x 12-position revolvers
H.I.T. NSM 250 RESAWING SAW WITH WOOD FEED FROM THE LEFT (LEFT-HAND MACHINE). The system was fully functional until it was professionally dismantled and dismantled. In addition to the resawing saw with side fabric capping, a model turner, an alignment and centering table and a splitter separation transport included. Specifications Cutting height: 40 - 240 mm Cutting width: 18 - 400 mm / 5-leg variable Width unedged: 750 mm Lengths: 2.50 - 14.00 m Feed: max. 60 m/min Swivel circular saws for side goods cutting with 2 x 7.5 KW motors Saw drive with 2 x 132 KW motors Errors in the information excepted.
Inv. Num. : 8520 Type: MicroMill 2501.15F Producer: MicroStep Created: 2012 Parameters: Control System: iMSNC Software: Asper 3.5 – Basic Operating hours: 15000 h Work table length: 2500 mm Work table width: 1500 mm Source: MicroMill 2501.15F Equipment: Vacuum Suction Cups WITTE 84413 Filtration Nedermann E-PAK 500 3 mechanical grippers with manual pneumatic control on one side Static magazine for 8 tools at the end of the table
turning diameter:200 mm turning height:120 mm weight of the machine ca.:18 t Available from 01.08.2024
control:siemens 1P 6SL 3054--0CE01-1AA0 Documents:vorhanden
pressure:10 t stroke:400 mm total power requirement:1,6 kW weight of the machine ca.:1,1 t dimensions of the machine ca.:1100 x650 x 2050 mm dayligth:500 mm table-size:400 x 450 mm Documents:vorhanden
E-chain hoist, electric hoist, crane GIS type PK 250 / FFabr. No: 252 243 Year of construction 1988Load capacity 2500 kgHook travel 4 metersMain lifting speed 4.1 m/min. Fine lifting speed 0.9 m/min.- 2 load trainsGood condition; used
Cutting depth:70 mm engine output:12.4 A, 220/380 V , 2 x 6 kW working length:2500 mm dimensions of the machine ca.:3900 x 1100 x 1000 mm weight:1500 kg
cutting width:2500 mm Numbers of torche:2 Type of gas:Sauerstoff, Propan total power requirement:2 kW length:6000 mm control:KS 20 A Messer Griesheim Documents:vorhanden
table width:2300 mm table length:7000 mm burner heads:1 Plasma -Schneidk. burner heads:2 autogene Schneidköpfe control:NBS 400 Documents:vorhanden
E-welding machine, rod electrode welding machine ESAB type LTG 250Masch. No. 736-820-387 Year of construction 1997Power 250 Amp. = 35 % ED 190 Amp. = 60 % ED 150 Amp. = 100 % EDpower setting: infinitely variable - electrode holder with 6 meter connection cable - direct current - fan - air cooling - possibly also TIG welding possible, without hose packageMains connection 380 Volt, 50 Hz, 32 Amp. ConnectorSpace required L x W x H 1200 x 750 x 1050 mmWeight 180 kgGood conditionDevice was originally also suitable for TIG welding
material width:250 mm material thickness:0,2 - 2,0 mm no. of straightening rolls:7 straightening roll diameter:60 mm run-in height:1250 mm power capacity:4,0 kW weight:0,65 t Dimensions (WxDxH):1,05 x 1,25 x 1,5 m
pressure:250 t distance between columns:1110 mm stroke:250 mm Distance table/ram, max. stroke up, adjustment up:500 mm Table surface area:1100 x 900 mm Table height above floor:950 mm Side window:690 mm Ram surface:1100 x 900 mm Oil volume:730 l Power capacity:56,0 kW Dimensions (WxDxH):2,3 x 1,55 x 3,96 m
material width:250 mm material thickness:0,5 - 4,0 mm no. of straightening rolls:9 straightening roll diameter:60 mm number of draw-in rolls:2 power requirement:3,8 kW Weight:0,8 t Dimensions (WxDxH):1,6 x 0,8 x 1,5 m
Welding Fume Extraction, Soldering Suction, Laboratory SuctionHigh Vacuum Torch Extraction FUMATOR-APPARATEBAU HEINZ WAGNER Type Minivac 250 DSerien. No. 2902619 year of construction 2004Device air volume flow max. 250 m3/hMinimum air volume flow min. 100 m3/hSeparation efficiency 99.97 %Welding fumes class W3Motor power approx. 0.75 kWNet connection 230 volts, 50 Hz- extraction power infinitely adjustable- 2 pieces extraction connections 45 mm- mechanical air filter (used)- mobile base with 4 fixed castors,
CNC flame cutting machine BACH type ACW 2500Flame cutting machine with CNC control NBS 400Masch. No. 14 561-06 Year of manufacture 2006Cutting area 2500 x 6500 mmRaceway length 8000 mmTrack width 3345 mmHeight of the raceway 650 mm2x Machine cutting torchwith burning table; used
turning length: 2500 mm control: Sinumerik 840 D spindle head: A 11 tool numbers: 48 swing diameter over bed slide: 750 mm swing over bed: 780 mm c-axis: 0,1-30 1/min diameter of quill: 160 mm taper bore: MK 5 tool length - max.: 500 mm weight of tools max.: 15 kg weight of the machine ca.: 27 t dimensions of the machine ca.: 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm) The data for this ad was crea ...
Single column hydraulic press SCHULZ type SES 250Masch.Nr. 04.86.3511/3 Year of manufacture 1986Compressive force 25 ton. Retraction force 10 toProjection 360 mmTable surface 600 x 720 mmPlunger area 500 x 500 mmFailure opening in table 100 mmPin hole 40 mmPlunger stroke 400 mmInstallation height max. 600 mmTable height above floor 935 / 775 mmTank capacity hydraulics 380 litresDrive power 7.5 kWNet connection 380 volts, 50 Hz- Fixed stop adjustment in the press cylinder 180 mm- Light barrier
L + Z Lathe WEWAG Model 250 / 1500Fabr. No. 20953 Year of construction approx. 1975Center width 1500 mmNominal turning diameter over bed 500 mmTurning diameter over bed max. 510 mmCenter height over bed 255 mmTurning diameter over support 300 mmCenter height over support 150 mmSpindle bore 56 mmSpindle speed 18 - 1800 rpm. 24 stepsRotary chuck mount short taper DIN 55022Tailstock inner taper MK 5Drive power 4 kW and 6.7 kW pole-switchable- 3-jaw lathe chuck BISON, 250 mm-
Reciprocating compressor KAESER type EPC 630-250Fabr. No. 1802334 year of construction 1992Volume flow at 6 bar 440 litres/min. Capacity max. 630 litres/min. Pressure capacity 10 barBoiler capacity 250 litersEngine power 3 kWNerg connection 400 Volt, 50 Hz (with 16 Amp. Plug)- 2 cylinders oil-lubricated- Pressure switch set to 10 bar- Runtime from 0 bar to 10 bar Shut-off pressure = 5 minSpace required L x W x H 750 x 700 x 1750 mmWeight approx. 150 kgGood condition; used
Brush deburring machine, tube deburring machine ERINI type 250Year of construction approx. 1995Brush diameter 250 mmBrush width 25 - 60 mmSpeed 1500 / 3000 rpm. Power 2.2 / 2.8 kWNetz connection 380 Volt, 50 Hz- Material support- new deburring brush- Suction connection 100 mmSpace requirement L x W x H 620 x 500 x 1150 mmWeight 100 kgGood condition; used
Transnorm belt conveyor GF 25000-1000-900 RA2416 Technical data: Conveyor length (NL): 25000 mm frame width (NB): 1000 mm, 1100 mm with motor belt width (GuB): 900 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,2 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW2,2 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 25000 Nominal / outside width in mm: 1000 Belt width in mm: 900 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 2,2 Conveyor speed m / s: 0,2 scope of d ...
Inv. Num. : 8552 Type: TMM-250 M1 Producer: Takisawa Created: 2005 Parameters: Control system: FANUC 180i Max. turning diameter: 350 mm Maximum spindle speed: 4000 1/min Bar diameter: 50.8/76.2 mm Length: 4745 mm Width: 2932 mm Height: 2250 mm Weight: 8500 kg Equipment: 2 spindles and 2 heads with driven tools
Test force: -- kN Dimensions (HxWxD): -- mm weight: 76 kg Condition: Used, ready for use Specification: Mitutoyo image processing and profile measuring device Type: Quick Scope QS-250Z 1J - Used The Quick Scope QS-250Z is used to measure: - Outer diameter - Inner diameter - Distance measurement - Parallelism - Angularity The device was used in quality assurance in a single-shift operation. Technical data: - Measuring range: X = 200 mm, Y = 250 mm, Z = 100 mm - Accuracy: 5 µ / resolution 0.5 µm - Image capture unit: 1/3 CCD color camera - Travel speed max.: 80 mm/s - Acceleration max.: 250 mm/s² - Table dimensions: 269 x 311 mm Lighting: - Transmitted light: 12V / 30W halogen - Coaxial incident light: 12V / 50W halogen - Fiber optic ring light: 12V / 100W halogen Software: QSPAK Version 3.1 Operating system: Win10pro Workpiece weight: max. 10 kg Weight: ...
A CNC image processing and measuring device Mitutoyo is available. Travel X/Y/Z: 200mm/250mm/100mm, accuracy: 5µm, resolution: 0.5µm, travel speed: 80mm/s, acceleration: 250mm/s², glass table dimensions X/Y: 269mm/311mm, max. workpiece weight: 10kg, weight: approx. 70kg, control: QSPAK Version 3.1. Documentation available. An on-site inspection is possible.
Offer 25286 Specifications: - Saw blade dimensions 400 x 35 x 2.0 mm - Cutting range - 90° round approx. 252 mm - flat approx. 250 x 160 mm - Square approx. 210 x 210 mm - 45° round approx. 160 mm - Flat approx. 150 x 150 mm - Material replenishment machine - max. opening width of the vise 265 mm - mitre-adjustable vise - Coolant device - Drive 400 V / 0.65 / 1.6 kW - Space requirement approx. W 1400 x H 950 x D 1700 mm - Weight approx. 600 kg
AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Manufacturer: AIDA Type: NC2-250(1) Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(), 30kW - Japanese standard Pgsc N D D Hou Dxb Tjxop Net weight: 35000kg Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.
A form-fill-seal machine Rovema including a multihead weigher Ishida CCW-S-211 is available. Packaging capacity: 80 bags/min, bag dimensions X/Y: 250mm/350mm, max. film roll width: 530mm, machine dimensions X/Y/Z: approx. 2000mm/1450mm/1850mm, weight: approx. 1200kg, operating hours: 14607h. Documentation available. An on-site inspection is possible.
vibrating bowl feeder Vibrating feeder RNA SRC-N 550mm diam vibrating feeder with controller Manufacturer/Typ: RNA SRC-N 250-2R Top bowl diameter: 550 mm Bowl diameter bottom: 250 mm voltage: 230 volts 50Hz protection: ip 44 Fpobmafvewav R Sjpxok vibration frequency at 100Hz: 6000 /min vibration controller Bowl diameter bottom: 250 mm Bowl diameter top: 380 mm Inner bowl height: approx. 70 mm overall dimensions: height: 700mm width:600mm weight:80g in good condition!
Swing diameter over bed/cross slide: 820mm/550mm, distance between centers: 2666mm, max. turning diameter: 610mm, max. workpiece length: 2500mm, travel X/Z: 410mm/2560mm, travel Y: -80mm/100mm, max. workpiece weight without/with tailstock: 500kg/1500kg, tool positions: 12, rapid traverse X/Z/Y: 24m/30m/12m/min, feed force X/Z/Y: 17kN/20kN/17kN. Machine dimensions X/Y/Z: approx. 5500mm/2250mm/2550mm, weight: approx. 15000kg, operating hours: approx. 56089. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026.
A precision glass grinding machine Carl Zeiss for pre-grinding optical workpieces is available. Workpiece spindle speed: 125rpm, tool spindle speed: 7000rpm, feed: 6mm/min, roundness and flatness accuracy: +/-0.005mm, swivel range: 50°, permissible repeatability: +/-0.01mm, measured repeatability (1990): +/-0.005mm. Documentation available. An on-site inspection is possible.
Working width: 2500mm, max. sheet thickness aluminium/steel/stainless steel: 3mm/2mm/1.25mm, feeding length range: 575mm-2500mm, feeding width range: 210mm-1500mm, max. bending height: 200mm, max. negative bend: 35mm, max. diagonal twist: 3300mm, rotary table position: 0°/90°/180°/270°, working height: 1150mm. Clamping stroke: 210mm, clamping force: 240kN, clamping lowering and return speed: 50mm/s, upper beam swivel range: 135°, upper beam swivel speed: 90°/s, lower beam swivel range: 135°, lower beam swivel speed: 90°/s. Machine dimensions X/Y/Z: approx. 4050mm/1600mm/2400mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible.
Key data: 600 kN, 132 g/PS, 35 mm
Arburg 320C-600-250 Injection Moulding Machine (241) Ability to work vertically Number: 241 Availability: in stock Year of production: 2008 Producer: Arburg Condition of Injection Molding Machine: Used Screw diameter [mm]: 35 Injection weight [g]: 132 Injection pressure [bar]: 1820 Clamping force [kN]: 600 Gap spacing [mm]: 320×320 Panel size [mm]: 446 x 446 Min. mould height [mm]: 200 Control Type: Selogica Tongue: German Installed power [kW]: 23.9 Working hours [h]: 74753 Weight [kg]: 2330 Dimensions [mm]: 3500×1500 Feed hopper: NO Robot Socket: Yes Core String: 1x
30 pcs generators with diesel engine Engine Type: Perkins 2506C-E15 TAG2 Power PRP: 500 kVA Power LTP: 550 kVA Year: 2012 Hours: Less than 300 Speed: 1500 1/min Generator: Leroy Somer LL6114F Voltage. 400/231 V, 50 Hz Type: Container Was used as an emergency power system, only ran for test runs and inspections. Subject to prior sale - errors possible! Internal reference number: E-1004-102
Gabarino MU80-250 Pump Ship Condition see photos Pump unused Electric motor overhauled
maximum number of results exceeded
please refine your search
