tetra pak 250 used for sale

Key data: 200 KW, 250 kVA, 400 V

The Electroquell 250 kVA (200 kW) generator is suitable as a main or backup power source in factories, hospitals and public facilities. The Ricardo engine ensures high performance. Ricardo Euro V-engine ComAp IL-NT AMF25 controller Brushless alternator Weatherproof housing made of Al.-Zn. sheet metal Drip pan Engine heating Power: 250 kVA / 200 kW Voltage: 400 V Current: approx. 361 A Large capacity fuel tank Additional options: ATS, remote control, enlarged tank Warranty: up to 60 months

capacity 90 degrees: round: 110 mm capacity 90 degrees: flat: 255x160 mm capacity 90 degrees: square: 210x210 mm capacity 45 degrees: round: 160 mm capacity 45 degrees: flat: 165x110 mm cutting range 45 degree right side: square: 150x150 mm cutting speed: 11/13/17/22/26/34 m/min stroke speeds: 50/64/82/100/128/164 Hübe/min dimensions of saw-blade: 400x36x2 mm power requirement: 1,8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 640 mm max. turning passage: 640 mm control: Simens 840 D Powerline - - - - - Main spindle - - - - -: - - - - - - bar material dia.: 65 mm chuck diameter: 200 - 315 mm spindle bore diameter: 80 mm diam. of main spindle in forward position: 120 mm --- Subspindle ---: - - - - - - bar material dia.: 65 mm chuck diameter: 315 mm spindle bore diameter: 80 mm forward bearing diameter: 120 mm - - - - - General data - - - - -: - - - - - - spindle distance: 1.500 mm turning length: 1.185 mm Main-/Counter -spindle turning speeds: 5.000 U/min driven tools turning speeds: 12.000 U/min Slide cross: X1, Y1: 550 / 180 mm Slide cross: Z1: 1.185 mm Slide cross: B1: 240 ° Slide cross: X2: 180 mm Slide cross: Z2: 1.050 mm Slide cross: Z3: 1.150 mm CNC Turning- and Milling Center | DMG GILDEMEISTER - GMX 250 linear equipped with main/counter spindle, chip conveyor, tool changer, a turret fo ...

Key data: 275 mm, 4000 1/min

Mori Seiki NL 2500 SY / 1250 CNC lathe with Y-axis, driven tools and 2nd spindle CNC control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 /366 mm Spindle bore diameter 80 mm Spindle speed 4000 rpm Spindle motor 18.5/15 Kw X-axis travel 260 mm Y-axis travel +50 / -50 mm Travel Z-axis: 1345 mm Travel of the W-axis (sub-spindle to main spindle) 1275 mm Min. indexing C-axis main spindle 0.001° Number of tools on the turret 12x Number of driven tools 12 x Tool cone BMT Bar Feeder LNS Quick Load Servo lll Spindle-motor-driven tools 6000 U/ If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

This 4-axis Mazak QTN 250 II MSY was manufactured in 2015. It features a maximum swing diameter of 640 mm and a maximum machining diameter of 380 mm. The machine includes a main spindle with a chuck diameter of 250 mm and a counter spindle with a chuck diameter of 210 mm. If you are looking to get high-quality turning capabilities, consider the Mazak QTN 250 II MSY horizontal turning machine we have for sale. Contact us for further details.

Offer 24236 Specifications: - max. working width 2550 mm - max. cutting capacity St 40 4.0 mm - Cutting angle 1.30 ° - Positioning-controlled back gauge 20 - 750 mm - Front angle stop + support arms - E. footswitch - Stroke rate up to 34 rpm depending on cutting length - Drive 400 V / 3 kW - Table height approx. 850 mm - Space required including back gauge, without front support arms -ca. W 3250 x H 1250 x D 2000 mm - Weight approx. 3500 kg

Semi-automatic band sawing machine Saw blade size: 2910 x 27 x 0.9 mm Cutting speeds 20 - 120 m/min Cutting capacity 0° round Ø258 mm Cutting capacity 0° square 250x250 mm Cutting capacity 0° rectangular 320x100 mm Cutting capacity 45° round 210Ø Cutting capacity: 45° square 195x195 mm Cutting capacity: 45° rectangular, 210x100 mm Cutting capacity 60° round 135Ø Cutting capacity 60° square 110x110 mm Cutting capacity 60° rectangular 135 x 100 mm Cutting capacity -45° round 185Ø Cutting capacity -45° square 170x170 mm Cutting capacity -45° rectangular 195x100 mm Weight 390 kg If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

- AISI 304 stainless steel Equipment: - Round manhole with handwheel - Level indicator - Tester - Floating lid, air chamber and pump - gallows - Partial drain, Friedrich ball valve no. 2 40 - Total drain, Friedrich ball valve no. 2 40 Dimensions: - Ground clearance: 315 mm - Diameter: 1690 mm - Height: 2180 mm

2021 Kraft VPS-100/2500 Cardboard cutting machine VPS100 from Kraft The machine was built in 2021 and was used very little. VPS100/2500 Basic machine plus - 10 x tool for longitudinal machining - 1 x tool for cross processing - 2 x rubberized rollers as counter-cut or transport medium - 1 x upper pressure controlled in segments above the feed roller - 1 x control cabinet decoupled and integrated in the basic machine Additional: - Freestanding control panel - Automatic outfeed device - Automatic carton changer with 6 chutes (4 with side-by-side function) - Mguard router - Wireless 1D code scanner incl. interface - 3 free Kraft Boxdesigner licenses + 1 license on the machine Description With the VPS100 automatic box cutting machine you can finally produce the right packaging, at the right time, in the right quantity. Reduce your cardboard consumption to what is necessary ...

Note: The pictures serve to illustrate the material. - The workbench frames are picked unassembled; - The production time is usually about 3 - 5 working days. Basic dimensions: Width: approx. 1,250 mm Depth: approx. 700 mm Height: approx. 940 mm The scope of delivery includes: 04x Square tube, used Material colour: sendzimir galvanised Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Borehole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma Profile, used Material colour: sendzimir galvanised CS-Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 970 mm 02x CS Sigma Profile, used Material colour: sendzimir galvanised CS-Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 420 mm 01x Particleboard, used Particleboard thickness: 38 mm Particleboard width: 1,250 mm Particleboard depth: approx. 700 mm Surface: coat ...

Equipments: as is Good condition Overtemperature protection max. 170°C Plant power max. 7.5 kW PUR gluing unit

Foot: 900 mm Vertical: 4980 mm Head: 2770 mm Belt speed: 0.47 m/s Flow rate: 10.0 cbm/h Bulk density: 0.18-0.25 t/cbm Engine power: 0.55 kW Speed range: 136 rpm Chain drive: 5/8" Chain Pulley Motor: Z = 15 Sprocket B. movement: Z = 38 Shaft design: sheet steel 3+4mm Removable side plates in the base Further measurements can be found in the attached plan.

Maplan 250ton Injection Machine Injection MTF 1500/250 Platen size = 630mm x500mm Stripper plate/ejectors =top only Max gap between platens = 702mm Volume = 1500 ccm3 Tonnage = 250T Year 2007

cutting width: 150 mm machine weight ab.: 300 kg : 27468 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mixer 250 liters of twin-shaft with blades – brand new! The machine has 2 reverse gear motors ×1.1 kw or total power 2.2 kW. Main characteristics: Designed for homogeneous mixing of food products; Made entirely of stainless steel; Completely silent mixing process; Two working augers with blades; 2 new front discharge valves; Easy cleaning of the machine; Built-in two silent gear motors of the highest class; Protective cover with limit switch; Built-in electric. Part of it has moisture-proof control buttons. Reverse mixing system in both directions; Capacity: 250l.; Installation power 2.2KW, 400V, 50Hz;

Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor RNA Vibrating Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwing TechnologyFeeding System, Feeding DeviceManufacturer: RNA Rhein-Nadel Automation GmbHTyp: SRC-N 250-2LSer.- No: 03613 Year of Construction: approx. 2000Pot Diameter Bottom: 250 mmPot Diameter Top: 380 mmPot Inner Height: approx. 70 mmSorting Lane Width: 30 mmTotal Height (Drive + Pot with Sorting Path): 390 mmOscillation Frequency: 100 Hz / 6000 min-1Power supply: 230 volts, 50 Hz control unit

Offered is a single-column eccentric press, manufacturer Schuler. Press force: 63t, throat depth: 250mm, max. stroke: 8mm-100mm, max. stroke rate: 160strokes/min, bed area X/Y: 710mm/500mm, slide area X/Y: 450mm/280mm, slide adjustment: 63mm, max. distance between bed and slide: 415mm, including a safety screen at the working area. Machine weight: approx. 3900kg. Inspection possible by arrangement.

Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor RNA Shaking Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwing TechnologyFeeding System, Feeding DeviceManufacturer: RNA Rhein-Nadel Automation GmbHTtype: SRC-N 250-2LSer.- No: 03609 Year of Construction: approx. 2000Pot Diameter Bottom: 300 mmPot Diameter Top: 350 mmPot Inner Height: approx. 25 mmSorting Track Width: approx. 30 mmTotal Height (Drive + Pot with Sorting Track): 380 mmOscillation Frequency: 100 Hz / 6000 min-1Power supply: 230 volts, 50 Hz

Power supply, power supply unit, ballast, driver Manufacturer: GIB Lighting, ballast -Type: Pro-VT 250W -Quantity: 10x ballasts available -Price: per piece -Dimensions: 185/90/H80 mm -Weight: 3.7 kg/pc.

Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor RNA Shaking Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwing TechnologyFeeding System, Feeding DeviceManufacturer: RNA Rhein-Nadel Automation GmbHTyp: SRC-N 250-2LSer.- No: 03611 Year of Construction: approx. 2000Pot Diameter Bottom: 300 mmPot Diameter Top: 350 mmPot Inner Height: approx. 25 mmSorting Track Width: approx. 30 mmTotal Height (Drive + Pot with Sorting Path): 380 mmOscillation Frequency: 100 Hz / 6000 min-1Power supply: 230 volts, 50 Hz- The

Travel X/Y/Z: 600mm/500mm/400mm, table dimensions X/Y: 900mm/600mm, spindle mount: SK40, speed: 6000rpm, tool positions: 24, feed: 6m/min, rapid traverse: 15m/min, machine dimensions X/Y/Z: approx. 4000mm/4000mm/2700mm, weight: approx. 5000kg. On-site inspection is possible.

cutting diameter: 255 mm saw band length: 2765x 0,9 x 27 mm cutting width: 300 x 180 mm turning speeds: 35 + 70 U/min total power requirement: 1,8 kW weight of the machine ca.: 450 t dimensions of the machine ca.: 1,7 x 1,23 x 1,75 m SPECIAL PRICE! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3 ...

Working length: 3100mm, pressing force: 2500kN, max. stroke: 465mm, rapid down speed: 190mm/s, working speed: 10mm/s, rapid return speed: 150mm/s, machine weight: 18t. Machine control retrofitted to Cybelec approx. 5 years ago. Safety control completely renewed in July 2026, new Siemens components installed in the control cabinet. Inspection possible by arrangement.

Decoiler Coil weight: 2,5 ton Material width: 50 - 500 mm Coil exterior diameter: 1400 mm Expansion range: 420 - 520 mm Leveller / Straightener Material width : 500 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 50 mm Number of pinch rolls: 2 pcs. Material thickness: 6 mm Cross section: 3000 sq mm Feeding speed: 6 - 24 m / min

pressure: 2,5 kN stroke: 45 mm throat: 90 mm Working height from to: 80 - 220 mm table surface area: 120 x 60 mm weight of the machine ca.: 22 Kg dimensions: 160 x 230 x 390 mm Hand presses with rack HZ 250 The power is transmitted via a rack and pinion construction. she finds their use where during the working process a constant pressure is needed. Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressure performance, T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Precision Mechanical Machine Vise manufactured in 2016. This TRIGO SCS 120-250 features reversible jaws with a jaw width of 120 mm and a trapezoidal spindle drive mechanism. It offers versatile mounting configurations for horizontal, vertical, or lateral clamping. If you are looking to get high-quality clamping capabilities, consider the TRIGO SCS 120-250 machine we have for sale. Contact us for further details.

This 4-axis DMG Mori Seiki SL 2500 Y was manufactured in 2005. It features a maximum swing diameter of 755 mm and a machining diameter of 390 mm, with a maximum machining length of 655 mm. The machine includes a 12-station turret and a programmable hydraulic tailstock. If you are looking to get high-quality turning and milling capabilities, consider the DMG Mori Seiki SL 2500 Y turn-mill centre we have for sale. Contact us for further details.

A Trima CNC gantry machining center is available. Workpiece dimensions X/Y/Z: 2500mm/1100mm/80mm, spindle power: 7.5kW, speed: 24000rpm, tool positions: 10, traversing speed X/Y/Z: 55m/35m/15m/min. Machine dimensions X/Y: approx. 4400mm/2500mm, weight: approx. 3200kg, control: Siemens Sinumerik. The machine has a control defect. The reference run is aborted. Documentation available. On-site inspection is possible.

Cylindrical grinding machine manufactured in 2015. This OKAMOTO OGM 250 UNC III features a maximum machining diameter of 200 mm and a distance between centres of 500 mm. It includes an X-axis travel of 215 mm and a Z-axis travel of 762 mm, providing efficient grinding capabilities. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO OGM 250 UNC III machine we have for sale. Contact us for further details.

This DMG GILDEMEISTER CTV 250 Vertical lathe machine was manufactured in 2012 in Germany and has 38984 production hours. It is equipped with a SIEMENS control unit. The machine dispose of a chip conveyor and a high pressure cooling system with paper filter. The revolver head was completely renewed at the end of the previous year.

CNC Press Brake manufactured in 2024. This DAMAMT WC67K 63T/2500 CNC features a pressing force of 63 tons and a bending length of 2,500 mm. It includes advanced CNC control with 4+1 axes and motorized V-axis crowning for precision bending. If you are looking to get high-quality bending capabilities, consider the DAMAMT WC67K 63T/2500 CNC Press Brake we have for sale. Contact us for further details.

The machine is ideal for professional use in the workshop, locksmith's shop or metal construction as well as for demanding do-it-yourselfers. Model: MOD 250 Drive / connection: 400 volt high-voltage current (CEE plug) Speeds: 2 levels selectable (Lento / Veloce) via control panel Coolant Facility: Integrated Coolant System (Coolant Pump Available) Equipment: Solid vise with quick adjustment/handwheel Degree adjustment / mitre cuts possible Integrated base / base with storage compartment Belt tension meter / pressure gauge on the saw bracket Circuit breaker & control clearly arranged on the control panel Condition: Used with signs of wear and tear (see pictures). Stable and fully functional from workshop liquidation/stock. Note: A visit and a function test on site are possible by arrangement.

turning diameter: 250 mm turning length: 100 mm control: SIEMENS 840 D total power requirement: 35 kW weight of the machine ca.: 7500 kg dimensions of the machine ca.: m E M A G (Germany) Vertical CNC Controlled Hard Turning and Grinding machine with tool turret and workpiece handling System Model VSC 250 DS Year 2004 # M7 28.69324 _______________________________________________________ Turning Ø, max. 250 mm Turning length internal / external 100 mm Workpiece length min./max. 29 – 100 mm 6-positon tool turret Ø / swing-Ø 480/790 mm Workpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mm Feed rate / Quick feed X/Z 45/30 m/min. Feed force X/Z 5,5/11 kN Spindle speed 4.300 / 6.000 rpm Spindle drive 28 kW Total electrical load, ...

turning diameter over bed: 250 mm turning diameter over slide rest: 140 mm turning length: 550 mm turning speeds: 125 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK tailstock quill stroke: 65 mm connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 0,135 t dimensions of the machine ca.: 1,25 x 0,6 x 0,6 m Speed in 6 levels 125 - 2000rpm. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. (Independent) Fixed bezel. Revolving bezel. 4-fold steel holder. chip tray. back panel. spindle protection. Hardened bed rails. Longitudinal feed with left / right switching. Set of change gears. Associated Tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 250 ton V ? Ring nominal force: 30 - 125 ton Counter ram nominal force: 30 - 125 ton Ram stroke: 64 - 67 mm Table surface area : 560 x 600 mm Slide area: 560 x 560 Number of strokes: 80 s.p.m. Weight of machine approx.: 14.000 kg

Unitek 352 TVQ6-250-16 TG K

Manufacturer: ENGEL Model: duo 3660 /2500 US Year of Manufacture: 2022 Capacity: 2300T Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 15, Width 5, Height 4 (cm or m) - Weight 99000 kg - Voltage 480 Volts - Current 300 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) - Cooling or heating water 4 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

core drilling diameter max.: 25 mm bore depth: 1000 mm swing diameter: mm total power requirement: 25 kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: m T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling Centre Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 ______________________________________________________________________ _____________ Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Feed rates / quickfeed, XYZ, infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed  ...