tetra pak 250 used for sale

three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Cone: Short cone 8 Ø 139 mm -Bolt circle: Ø 170 mm -Through hole: Ø 80 mm -Weight: 24 kg

Used machine for crispy cakes, pressed from roller Saixin 250. Set mixer + roller machine + electric oven belt width 250 mm.

used, almost new Leica Sprinter 250M digital leveller with accessories see photos, stowed in the hard case 1.2x0.6x0.42 m with wheels.

Capacity 250 kg/h Throughput 2.3 m3 Briquette mould 8 square Antireb 11 kw Weight 1200 mg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Throughout: Ø 70 mm -recess recess: Ø 194 mm -Weight: 20 kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Martonair Type: M/60250B/250 -Stroke travel: 250 mm -Piston rod: Ø 10 mm (Connection: M10 x 1.5) -Quantity: 2 pieces available -Price: per piece -Dimensions: Ø 33/345 mm -Weight: 0.55 kg/piece

Nv. Num. : 7150 Type: ALLROUNDER 275 V 250 Producer: ARBURG Generated: Parameters: Clamping force: 250 kN Height of clamping plate: 150-250 mm Ejector stroke length: 225 mm Opening the mold: 375-475 mm

SPECIFICATIONS: Load capacity kg: 250 Chain length mm: 3500 Complete with remote control

Banding machine for folding boxes incl. inline feeding system, stacking device, PLC ELAU, type PacDrive Max-4 etc.

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outside/Inside: Ø 250/168.3 mm -Height: 58 mm -Number: 2x pillows available -Price: per piece -Weight: 4.2 kg/piece

clamping force: 600 kN injection volume: 144 cm³ screw diameter: 35 mm platen size: 570 x 570 mm closing stroke: 500 mm Condition: used Specification: Horizontal injection moulding machine clamping unit: - Clamping force max.: 600 kN - clamping platens: 570 x 570 mm - clear column distance: 370 x 370 mm - Distance between the mould mounting platens: 750 mm - Mould installation height: 250 mm - Opening stroke max.: 500 mm - Ejector travel hyd. Ejector stroke: 175 mm - Ejector force max.: 40 kN Injection unit: - Screw diameter: 35 mm - Screw length: 20D - Screw stroke max.: 150 mm - Max. dosing volume: 144 cm³ - Moulded part weight: 121 g - Injection pressure: 1,820 bar - Injection flow max.: 154 cm³/s - Screw peripheral speed: 57 m/min - Screw torque max.: 440 Nm - Barrel and nozzle heating: 1600 +  ...

-Pastry cutting table Manufacturer: A. Fritsch GmbH & Co KG -Type: FT250/700 -400 volts -with 2 cutting rollers -mobile on castors -400 volts -External dimensions approx.: 260x88cm and 110cm high

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Throughout: Ø 70 mm -Weight: 27.5 kg

Z-roll forming machine for sheet metal of ventilation duct production max. 1.0 mm sheet thickness 2500 mm sheet width

Transnorm Rising falling Incline belt conveyor with leading belt GF 3200+6000+2500-700-600 RA2156 Technical data: Conveyor length (NL): 11700 mm ( 3200 mm arch + 6000 mm riser segment + 2500 mm leading ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DT90S4/BMG/TH Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 11700 ( 3 ...

ID2952 Eirich compulsory mixer 2500 liters compulsory mixer 2500 liters Forced action mixer 2500 liters

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 18.5 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Weight: 19 kg

Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 75 mm -Weight: 21.5 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Weight: 19 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 24.5 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 75 mm -Short cones: 6 -Recess: Ø 194 mm -Weight: 29.5 kg

Description: AHT MIAMI FREEZER 250 Model: MIAMI 250 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 2300/2500 mm Depth (inside / outside): 720/850 mm Height (front/external access): 770/830 mm Volume (net): 850 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami 250 AHT is refurbished, freezer line is tested and cleaned internally and externally. Ready to use.

Description: AHT MIAMI FREEZER 250 Model: MIAMI 250 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 2300/2500 mm Depth (inside / outside): 720/850 mm Height (front/external access): 770/830 mm Volume (net): 850 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami 250 AHT tested but not cleaned and refurbished.

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 250 mm -Short taper flange for: bayonet disk mounting DIN 55027 -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 11 kg

Control: SIEMENS 840D Max.turning length: 1185 mm Max swing diameter over bed/slide: 640 mm/550mm Workpiece diametr: 400/250 mm Material passage through the spindle: 65 mm Max.diameter of the material for barloader: 65 mm Rotation speed(max.) 5000 rpm Sp

GE LM 2500 gas turbines 2 pcs available Power:24.000 Hp each Average working hours 1700 hours

2500 KVA Transformer Year 2009

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 250 mm -Short taper flange for: bayonet disk mounting DIN 55027 -Cone size: 6 -Hole circle: Ø 133.4 mm -Weight: 7 kg

Flange mounting, driving flange -Chuck flange with: driving pin -Outer diameter: 250 mm -Short taper mount for: bayonet disc mounting DIN 55027 -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 17 kg

Machine vise, sturdy vise, drill vise -Vise: rotatable -Jaw width: 200 x 60 mm -Clamping depth: 250 mm -Dimensions: 520/280/H195 mm -Weight: 73 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 250 mm -Hole circle: Ø 225/Ø 14 mm -Dimensions: Ø 250/H45 mm -Weight: 9.4 kg

Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Barrier width: max. 100 mm -Payload: 2500 kg -Dimensions: 327/200/H270 mm -Weight: 27 kg

Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 110 bar -Liter output: 0.25 l/min -Motor: 24 V 22 W. -Hydraulic tank -Dimensions: 195/280/H160 mm -Weight: 17 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Recess: Ø 210 mm -Passage: Ø 80 mm -Weight: 20.7 kg

Specifications: Capacity 63 tons Stroke rate 140 h/min Projection 250 mm Plunger stroke 8-100 mm Table , WxD approx. 700 x 480 mm Installation height approx. 400 mm

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 250 mm -Short cones: 11 -Recess: Ø 199 mm -Weight: 36.5 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -Short taper: 11 -Rezess: Ø 199 mm -Weight: 35.8 kg

Transnorm modular conveyor with combiner conveyor belt GF 2500-1300-1200 RA2230 Merging of two belts into one Technical data: Conveyor length (NL): 2500 mm Frame width (NB): 1300 mm, 1600 mm with motor Belt width (GuB): 1200 mm Overall height (BH): 80 mm, 430 mm with motor at the bottom, approx. 1000 mm with motor at the top Scraper height: 190 mm (without motor) Belt width/height scraper: 180 mm Support feet: optionally available Conveyor speed (v m/s): 1 Drive: SEW geared motor, R17 DT80N4 Electrical data: 50Hz V380-500, kW 0.75 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length ...

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 18.7 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 25.8 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Passage: Ø 83 mm -Rezess: Ø 210 mm -Weight: 17.3 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Recess: Ø 209 mm -Weight: 21 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 70 mm -Short cones: 8 -Weight: 28 kg

1 CALATOR inspection machine for open width knitted fabrics type BSM 2500, roller width 270 cm, working width 250 cm, entry small roll, exit small roll, with LABELTEX 86 type LBTX defect registration unit, with illuminated table

turning diameter over bed: 250 mm turning diameter over slide rest: 140 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK tailstock quill stroke: 65 mm connected load frequency: 230 V total power requirement: 1,1 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,3 x 0,6 x 0,65 m Benchtop lathe with base cabinet 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Passage: Ø 82 mm -Short taper: 8 -Weight: 24.2 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Short taper: 6 -Throughout: Ø 80 mm -Weight: 25.9 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Short taper: 6 -Weight: 36 kg