tetra pak 250 used for sale

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Throughout: Ø 70 mm -Weight: 27.5 kg

Nominal force: 2500 ton Ram stroke: 190 mm Number of strokes in 1 minute: 20 Shut height: 800 mm Bolster plate-to-ram adjustable stroke: 15 Table size: 1250x1400 mm Weight 124.230T

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 18.5 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Weight: 19 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 75 mm -Weight: 21.5 kg

SPECIFICATIONS: Machining length: max. 2500 mm Machining width: max. 350-900 mm COMPOSITION: Station I: Milling machine right-left (2 x 11 Kw) Station II: Milling machine right-left (2 x 5.5 kW) Station III: Grinding unit right-left (2 x 3.7 kW) Station IV Grinding unit right-left (2 x 3.7 Kw) EQUIPMENT: 8 pushers for machining 1 hydraulic pump 1 control box 1 control panel 1 protective grille

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Weight: 19 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 24.5 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 75 mm -Short cones: 6 -Recess: Ø 194 mm -Weight: 29.5 kg

Kannegiesser GF 2500-890-800 RA1255 The Kannegiesser belt conveyor is from 2014 and is in a new (used) condition. It has 13 white striped straps made of 2-layer PET on an edged, expiring stainless steel sheet construction. Technical data: Manufacturer: Kannegiesser Type: Belt conveyor 800 Built: 2014 Condition: very good (used) Engine: fully functional Length: 2500 mm (measurement stretched over everything) Belt width: 50 mm (13 pieces) Scaffolding width: approx. 890 mm Height/strip curve: from 175 mm up to 750 mm Number of support feet: 2 pieces on rollers Load: 30 kg Conveyor speed: 0.6 m / s constant Drive: Spur gear motor Electrical data: 0.37 kW 230 / 400 V 60 Hz Deflection drum: diameter = 50 mm, stainless steel Belt reel roll: diameter = 50 mm, stainless steel Belt: 2-layer PET belt, white Design: CNC - lasered and edged stainless steel sheet construction. Material: 1.4016  ...

Dematic conveyor system Roller conveyors 3000/2500/2000/1500/1000-600-540 RA1938 Gravity conveyors - roller conveyors without drive Nominal/outer width (NB): 600 mm Available conveyor lengths (FL): 3000 mm, 2500 mm, 2000 mm, 1500 mm, 1000 mm Further information Manufacturer: Dematic Type: Roller conveyor Year of manufacture: unknown Condition: good (used) Roller width (RB): 540 mm Roller pitch: 62,5-125 mm variable Drive types: none or head and center drive Weight of conveyed goods: up to 30 kg Optionally available e.g: Motors with and without frequency inverter from SEW Eurodrive / Movimot Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: new Conveying length in mm: 1000, 1500, 2000, 2500, 3000 Nominal / outside width in mm: 600 Roll width in mm: 540 Roll division in mm: 62,5, 130 Driven: möglich scope o ...

Inv. Num. : 6992 Type: LKT 250 Producer: METALPRESS Created: 1963 Parameters: Ram stroke: 120 mm Plunger adjustment: 100 mm Machine weight: 2700 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 250 mm -Short taper flange for: bayonet disk mounting DIN 55027 -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 11 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 250 mm -Short taper flange for: bayonet disk mounting DIN 55027 -Cone size: 6 -Hole circle: Ø 133.4 mm -Weight: 7 kg

turret of a Boehringer lathe The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. -No.: 10142 Manufacturer: TIBO Year of construction: 2002 Type of control: CNC Control: Siemens Sinumerik 802D Storage location: Halberstadt Country of origin: Deutschland Drilling diameter: 1-13 mm Bore Depth: 250 mm Drilling spindle speed: 11.000 RPM X-Travel: 300 mm Y-Travel: 210 mm Z-Travel: 250 mm Machine weight: 2,5 t Further information: - With equipment

Flange mounting, driving flange -Chuck flange with: driving pin -Outer diameter: 250 mm -Short taper mount for: bayonet disc mounting DIN 55027 -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 17 kg

Ref. -No.: 10317 Manufacturer: NOSOTTI Type of control: Digitalanzeige - Mini wizard Control: Konventionell Storage location: Halberstadt Country of origin: Italy Tip length: 3000 Centre Height: 260 mm

Ref. -No.: 10055 Manufacturer: SCHUNK Storage location: Mülheim an der Ruhr Country of origin: Deutschland outer diameter: 250 mm Inside diameter: 80 mm

Machine vise, sturdy vise, drill vise -Vise: rotatable -Jaw width: 200 x 60 mm -Clamping depth: 250 mm -Dimensions: 520/280/H195 mm -Weight: 73 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 250 mm -Hole circle: Ø 225/Ø 14 mm -Dimensions: Ø 250/H45 mm -Weight: 9.4 kg

Ref. -No.: 10229 Manufacturer: GÖPPINGER Year of construction: 1953 Type of control: Konventionell Control: N/a Storage location: Halberstadt Country of origin: Deutschland Machine length: 4700 mm Machine width: 1450 mm Machine Height: 1300 mm Weight Of The Machine Ca.: 3,1 t Supply voltage: 380 V Turning Length: 3000 mm Turning Diameter Over Bed: 530 mm Centre Distance: 3050 mm Swing Diameter Over Bed Slide: 305 mm Spindle Bore: 58 mm Total Power Requirement: 5,5 kW Circulation in the crank: 720 mm

Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Barrier width: max. 100 mm -Payload: 2500 kg -Dimensions: 327/200/H270 mm -Weight: 27 kg

Drum screening machine with conveyor technology Drum 7000 x 2500 mm, screening fine fraction and 100 x 100 mm fraction Discharge of fine fraction by means of screw conveyors Discharge of oversize particles by means of belt conveyor

Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 110 bar -Liter output: 0.25 l/min -Motor: 24 V 22 W. -Hydraulic tank -Dimensions: 195/280/H160 mm -Weight: 17 kg

Used stainless steel ribbon mixer. Capacity 250 liters. The mixer with a double ribbon agitator.

Used machine for crispy cakes, pressed from roller Saixin 250. Set mixer + roller machine + electric oven belt width 250 mm.

used, almost new Leica Sprinter 250M digital leveller with accessories see photos, stowed in the hard case 1.2x0.6x0.42 m with wheels.

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Recess: Ø 210 mm -Passage: Ø 80 mm -Weight: 20.7 kg

Capacity 250 kg/h Throughput 2.3 m3 Briquette mould 8 square Antireb 11 kw Weight 1200 mg

SPECIFICATIONS: Load capacity kg: 250 Chain length mm: 3500 Complete with remote control

Banding machine for folding boxes incl. inline feeding system, stacking device, PLC ELAU, type PacDrive Max-4 etc.

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 250 mm -Short cones: 11 -Recess: Ø 199 mm -Weight: 36.5 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -Short taper: 11 -Rezess: Ø 199 mm -Weight: 35.8 kg

-Pastry cutting table Manufacturer: A. Fritsch GmbH & Co KG -Type: FT250/700 -400 volts -with 2 cutting rollers -mobile on castors -400 volts -External dimensions approx.: 260x88cm and 110cm high

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 18.7 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 25.8 kg

Z-roll forming machine for sheet metal of ventilation duct production max. 1.0 mm sheet thickness 2500 mm sheet width

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Passage: Ø 83 mm -Rezess: Ø 210 mm -Weight: 17.3 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Recess: Ø 209 mm -Weight: 21 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 70 mm -Short cones: 8 -Weight: 28 kg

Transnorm Rising falling Incline belt conveyor with leading belt GF 3200+6000+2500-700-600 RA2156 Technical data: Conveyor length (NL): 11700 mm ( 3200 mm arch + 6000 mm riser segment + 2500 mm leading ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DT90S4/BMG/TH Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 11700 ( 3 ...

ID2952 Eirich compulsory mixer 2500 liters compulsory mixer 2500 liters Forced action mixer 2500 liters

GE LM 2500 gas turbines 2 pcs available Power:24.000 Hp each Average working hours 1700 hours

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Passage: Ø 82 mm -Short taper: 8 -Weight: 24.2 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Short taper: 6 -Throughout: Ø 80 mm -Weight: 25.9 kg

Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Short taper: 6 -Weight: 36 kg