tetra pak 200 used for sale

Power: 80 kW (~109 hp); 1.6 gasoline; 1,587 cm³ Operating parameters: Manual gearbox; mileage 146,000 km; VIN VF33BNFUC83742922 Workpiece capacity: 2 doors; cabriolet (CC, retractable hardtop); 4 seats Supported edges: N/A Edge types: N/A Included equipment: Standard road equipment (details N/C) Compliance: EU road approval Power supply: Gasoline Year/Manufacturer: 2004 / Peugeot – 307 CC Remarks: Used condition; petrol engine with manual transmission; convertible body version Compact 2-door convertible with 1.6 petrol engine and retractable hardtop. Auction-ID: A7-46319-22

Internal number: 28466, platform extension: 91 cm to extend the platform length to 2.54 m, foldable railing to reduce the clearance height to 1.73 m, with anti-hole protection, eye-fastening for the safety harness, abrasion-resistant solid rubber tyres, ground clearance (centre): 6 cm, climbing ability: 30 %, only for indoor use Auction-ID: A1-46342-7

Bolzoni Auramo side shift fork positioner, front work lights, flash light, gold edition Auction-ID: A3-43525-280

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/Lxz-e8CnyB4 - Former Linde full-service device - Battery: 44/2023 48V 375Ah, very good performance measured at 25.4V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-311

Double bench grinder: Grinding grit: 36 and 80 Grinding wheel diameter max. 200 mm Grinding wheel width 32 mm Mounting diameter 30 mm Connection voltage 230 V Motor power 0.9 KW Condition: never used / new (5) Auction-ID: A7-46460-602

Internal number: 28256, platform extension: 0.90 m to extend the platform length to 3.20 m, foldable railing to reduce the clearance height to 1.96 m, with anti-hole protection, eye-fastening for the safety harness, abrasion-resistant solid rubber tyres, climbing ability: 25 %, suitable for indoor and outdoor use Auction-ID: A1-46342-48

• Max. permissible mass: (GVW) 44,000 kg • Axle loads: 3 × 9,000 kg • Fifth wheel pressure: 17,000 kg • RDW Proof of conformity available • NL registration • Permission to drive by road until 13/01/2026 Attention! Central belt of tipper on the left side is flat! Needs to be replaced! Auction-ID: A3-44483-13571

Brand: Atlas Copco Type: GA37 VSD Serial Number: API57877 Year of construction: 2008 Power: 37 kW Max pressure: 13 bar Flow rate: ± 7.25 m³/min Voltage: 400V – 3 phase Speed: ± 3730 rpm Weight: ± 1075 kg Extra info (very important!) Operating hours: 39,627 hours Last service: 30-07-2024 Auction-ID: A3-43525-11843

Peugeot Bipper light truck 1.4 HDI Compact and economical city van. Specifications 1.4 HDI 50 kW Euro 4 ± 167000 km 27/07/2009 first owner State No keys Not tested Rear window left broken Rust present Extra Good for parts or project Important information Vehicle sold in current condition without warranty. Start and drive does not guarantee roadworthiness or long distances. Description is indicative and non-binding. Auction-ID: A3-44483-11907

Year of production: 2002 Mileage: 156,000 km Engine capacity: 1397 cm³ Power: 44 kW Fuel type: Petrol Transmission: Manual Number of doors: 5 Number of seats: 5 Color: Gray VIN: TMBNH26Y523544924 Auction-ID: A7-46319-31

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/YM1lDvoA_EE - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery:07/05/2019 LI-ION 24V/410Ah, very good performance measured at 25.5V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-310

Internal number: 28270, platform extension: 90 cm to extend the platform length to 3.20 m, foldable railing to reduce the clearance height to 1.94 m, with anti-hole protection, fastening of the safety harness, abrasion-resistant solid rubber tyres, ground clearance: 9 cm, climbing ability: 25 % Auction-ID: A1-46342-21

Machine type: Edgebander Manufacturer: Homag Model: KF 61/07/QA/25 Year: 2004 Serial number: 0-202-25-9459 Technical data: - Application: Edge banding of chipboard and MDF panels - Machine type: Throughfeed edgebanding line - Workpiece thickness: approx. 8 – 60 mm - Feed speed: infinitely variable up to approx. 40 m/min Electrical data: - Voltage: 380 V - Frequency: 50 Hz - Phases: 3 + N Equipment: - Industrial edgebanding system for furniture production - Rolling chain transport system - Suitable for continuous production lines Remarks: Machine used in industrial woodworking environment; functionality not checked, sold \"as is\". Own mass: approx. 6000 kg Dimensions (LxWxH): approx. 11500 x 3000 x 2000 mm Auction-ID: A7-46477-3

Type: Pneumatic press for furniture fittings Operating pressure: 6 bar Electrical supply: 230V Motor power: 0.75 kW Auction-ID: A7-46477-13

BMW X5 4.4i (E53) – SUV General data: VIN: WBAFB31090LG95260 Model: X5 4.4i (E53) Body type: SUV Number of doors: 5 Mileage: 405000 km (Dutch registration) Engine: Type: Petrol, V8, naturally aspirated Displacement: 4398 cm³ (4.4) Engine code: M62B44 Cylinders: 8 (V configuration) Power: 210 kW (286 HP) Torque: approx. 440 Nm Drivetrain: Drive: Permanent all-wheel drive (4x4) Transmission: Automatic Performance: 0–100 km/h: approx. 7.5 s Top speed: approx. 230 km/h Fuel consumption (combined): approx. 13 – 15 l/100 km Dimensions: Length: approx. 4667 mm Width: approx. 1872 mm Height: approx. 1715 mm Wheelbase: 2820 mm Weights & capacities: Curb weight: approx. 2050 – 2150 kg Fuel tank capacity: 93 L Luggage capacity: approx. 465 L Description: BMW X5 4.4i (E53) SUV equipped with a powerful V8 engine and permanent all-wheel drive  ...

New hydraulic motor New shock absorbers New air cushions Brake pot Recent tires Gable and full floor revised The front axle ring (ball ring) less than 1 year old Ready to ride Auction-ID: A3-43524-35508

Perfectly working 2 axle Chieftain. Can be used for: sand and gravel, sifting coarse material, construction and demolition waste, compost and biomass and agricultural applications. This sorts materials by size so that you can make pure soil, reusable stone/gravel fractions and separate waste into usable streams. Auction-ID: A3-43524-7842

FEM3 mount, for forklifts with 2,500kg-5,000kg load capacity on pallet for loading into trucks FEM dimension 3A Fork length 135-200 mm Auction-ID: A1-45451-1103

Hydraulic Machine Vise Jaw width 125 mm Clamping range 200 mm Clamping height 40 mm incl. turntable Weight 55 kg Condition: unchecked (6) Auction-ID: A7-46460-568

Roll width 400mm Runway length: 2000mm Roller conveyor height 750 - 1000mm Weight 80Kg Auction-ID: A7-46460-468

can be loaded with forklift Auction-ID: A3-43525-11836

CNC Machining Center Vertical - 30-fold tool changer - Handwheel - Chip conveyors - Belt filter system - some SK40 tool holders System can be dismantled to 2.45m. x-travel 2000 mm y-travel: 620 mm z-travel 520 mm Control Heidenhain TNC CNC Speed range - main spindle max. 15000 rpm/-1 Tool holder BT 40 Table clamping surface: 2500 x 550 mm Tool changing device 30-fold Connected load 25 KVA Weight 10.5 t Dimensions LxWxH 8.0 x 2.6 x 2.75 m Auction-ID: A7-46460-415

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/vSWYzek0rNs - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 20/10/ 2020, 24V 4PzS 500Ah 24.9V , good performance measured with 24.9V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-319

Internal number: 28271, platform extension: 90 cm to extend the platform length to 3.20 m, foldable railing to reduce the clearance height to 1.94 m, with anti-hole protection, fastening of the safety harness, abrasion-resistant solid rubber tyres, ground clearance: 9 cm, climbing ability: 25 % Auction-ID: A1-46342-22

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/82BmNy9__DY - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 44/2023 48V 375Ah, good performance measured at 24.6V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-370

Year of construction 06 / 2024 REMA Battery Connector 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3579

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Former Linde full-service machine Attention: without battery Auction-ID: A1-45451-458

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and condition video:https://youtu.be/EV6gEyoyvAM - Former Linde full-service device - Service valid until 03/2027 - Battery: 09/2020 24V 4PzS 500Ah, very good performance measured with 24.9V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-371

Youtube function and status video: https://youtu.be/KAoDSuEIAvc - Former Linde service device - Next service only in 457 hours - UVV valid until 01/2026 - 3rd + 4th valve; Fork adjuster 22-148 cm with sideshift Auction-ID: A1-45451-165

Internal number: 28463, platform extension: 91 cm to extend the platform length to 2.54 m, foldable railing to reduce the clearance height to 1.73 m, with anti-hole protection, eye-fastening for the safety harness, abrasion-resistant solid rubber tyres, ground clearance (centre): 6 cm, climbing ability: 30 %, only for indoor use Auction-ID: A1-46342-35

Internal number: 28305, platform extension: 90 cm to extend the platform length to 3.20 m, foldable railing to reduce the clearance height to 1.82 m, with perforated protection, fastening for the safety harness, abrasion-resistant solid rubber tires, ground clearance: 9 cm, climbing ability: 25 %, a low-loader with its own ramps is mandatory for collection! Auction-ID: A1-46342-58

Internal number: 69342, rotatable work cage, swivel range: 360° (endless), swivel carriage overhang: 0.60 m, ground clearance (middle): 31 cm, climbing ability 58 %, with eyelets for the safety harness, steel chain with solid rubber pads, for outdoor use, for collection a low-loader with its own ramps is mandatory! Auction-ID: A1-46342-59

Internal number: 28356, platform extension: 91 cm to extend the platform length to 2.54 m, foldable railing to reduce the clearance height to 1.75 m, with anti-hole protection, eye-fastening for the safety harness, abrasion-resistant solid rubber tyres, ground clearance (centre): 6 cm, climbing ability: 30 %, only for indoor use Auction-ID: A1-46342-5

Machine type: CNC drilling machine Manufacturer: Biesse Model: Skipper 130 Year: 2008 Serial number: 04671 Control: BiesseWorks CNC system Application: CNC machining center for wood panels (drilling, milling, grooving) Technical data: - Working area (X/Y): approx. 3000 x 1300 mm - Workpiece thickness: 8 – 90 mm - Min. workpiece size: approx. 90 x 70 mm - Drilling spindles: 31 + 31 vertical (top & bottom) - Horizontal spindles: 8 + 8 (X direction), 2 + 2 (Y direction) - Max. spindle speed: 6000 rpm (drilling), up to 24,000 rpm (electrospindle) - Main motor power: approx. 4.5 kW (electrospindle) - Total installed power: approx. 22.5 – 24 kW Working capabilities: - Simultaneous machining on top and bottom sides - Processing of all 6 sides in one pass - Drilling, milling, grooving and dowel operations - Automatic panel measurement and thickness adjust ...

Internal number: 28485, platform extension: 91 cm to extend the platform length to 2.54 m, foldable railing to reduce the clearance height to 1.73 m, with anti-hole protection, eye-fastening for the safety harness, abrasion-resistant solid rubber tyres, ground clearance (centre): 6 cm, climbing ability: 30 %, only for indoor use Auction-ID: A1-46342-41

Internal number: 28362, platform extension: 91 cm to extend the platform length to 2.54 m, foldable railing to reduce the clearance height to 1.75 m, with anti-hole protection, eye-fastening for the safety harness, abrasion-resistant solid rubber tyres, ground clearance (centre): 6 cm, gradeability: 30 %, only for indoor use Auction-ID: A1-46342-8

start, drive and execute what it needs to do General information Brand: John Deere Type: 6310 SE Vehicle category: Agricultural tractor Fuel: Gasoil (diesel) Identification Chassis number (VIN): L06310V333249(01) License Plate: GLYP494 Document number: 565193467 Data Date of first admission/registration: 10/04/2002 Last registration: 03/03/2014 Weights Permissible max mass: 5320 kg Front axle: 2220 kg Rear axle: 3100 kg Hours Approximately 7419 hours Auction-ID: A3-43524-11888

Type: Sedan Year of production: 2008 Mileage: 179,000 km Engine capacity: 1364 cm³ Power: 66 kW Fuel type: Petrol Transmission: Manual Drive: Front-wheel drive Number of doors: 5 Number of seats: 5 Color: Silver (Srebrny) VIN: W0L0TGF488G114630 Auction-ID: A7-46319-29

Kaiser 3 axle semi low loader, 3rd axle steered axle, hydraulic ramps, LED lighting working all around, LED work light rear, new support leg, Belgian registration documents complete, length bed:8.2m, length Neck: 4.4m, Total 13m Auction-ID: A3-44483-50

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/_SN5UQrsbAw - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 10/2022 24V 625Ah, good performance measured at 24.8V - Facelift model with tilt angle display (practical for sensitive goods) - Clear-view mast without central hydraulic cylinder - 3rd valve, sideshift - Side fall-out protection (can be easily dismantled) - white non-marking tires - LED front work light - LED work light at the rear - Safety light at the rear - Comfort seat Auction-ID: A1-45451-41

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/sjwN5M8EWSw - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 08/2021 24V 3PzS 375Ah, very good performance measured with 49.9V Initial stroke - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-302

Opel Vivaro 1.9 DTI 60 kW Light Cargo First generation Vivaro known for its solid engine and practical cargo space. Specifications 1.9 diesel 60 kW Euro 3 2 + 1 seats 119345 km 08/08/2002 first owner Facts Roof racks State Starts and drives All-round damage and scratches Battery may be weak Extra Popular work bus Easy maintenance Important information Vehicle sold in current condition without warranty. Start and drive does not guarantee roadworthiness or long distances. Description is indicative and non-binding. Photos show the actual condition. No inspection or documents do not constitute a reason for cancellation. Auction-ID: A3-44483-11911

Youtube function video: https://youtube.com/shorts/OBVDwbD3IUk FEM3 (approx. 50cm): Fits any forklift with a payload of 3,000-5,000kg Fork length: 120-200cm Auction-ID: A1-45451-1174

Internal number: 28477, platform extension: 91 cm to extend the platform length to 2.54 m, foldable railing to reduce the clearance height to 1.73 m, with anti-hole protection, eye-fastening for the safety harness, abrasion-resistant solid rubber tyres, ground clearance (centre): 6 cm, climbing ability: 30 %, only for indoor use Auction-ID: A1-46342-39

Type: Small car Year of production: 2009 Mileage: 178,000 km Engine capacity: 1360 cm³ Power: 73 HP Fuel type: Petrol Transmission: Manual Number of doors: 5 Number of seats: 5 Color: Black VIN: VF7FCKFVC29245991 Auction-ID: A7-46319-35

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/aQNY8FxI8MA - Former Linde full-service device - Battery: 44/2023 48V 375Ah, good performance measured with 24.8V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-363

Wooden band saw with extendable and swivel saw table Roller diameter 200 mm Cutting height 80 mm Cutting width 180 mm Motor power 350 W Table size mm Table tilt 45 degrees Saw blade length 1400 x 6.5 x 0.35 mm Condition: never used / new (5) Auction-ID: A7-46460-512

Internal number: 28268, platform extension: 90 cm to extend the platform length to 3.20 m, foldable railing to reduce the clearance height to 1.94 m, with anti-hole protection, fastening of the safety harness, abrasion-resistant solid rubber tyres, ground clearance: 9 cm, climbing ability: 25 % Auction-ID: A1-46342-20

Year of construction 06 / 2024 REMA Battery Connector 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3576

Internal number: 28458, platform extension: 91 cm to extend the platform length to 2.54 m, foldable railing to reduce the clearance height to 1.73 m, with anti-hole protection, eye-fastening for the safety harness, abrasion-resistant solid rubber tyres, ground clearance (centre): 6 cm, climbing ability: 30 %, only for indoor use Auction-ID: A1-46342-42