tetra pak 200 used for sale

Lighting does not work Bottom plate in need of replacement Hydraulic piston and mechanical not present 300x185x40 Auction-ID: A3-44483-11123

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/yGXAJKM0BS0 - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 44/2023 48V 375Ah, very good performance measured at 25.7V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-317

Diesel IBC storage tank mobile, with hose and automatic filling nozzle, tank gauge, lockable cap, valve cylinder, lashing strap securing brackets, 200L Auction-ID: A3-43525-5928

Machine type: Conveyor / transport system Manufacturer: Socot S.R.L. Model: TR4 DOP MOT Year: 2004 Serial number: 24023 Technical data: - Application: Industrial material transport / conveyor unit Electrical data: - Power: 2.2 kW - Voltage: 400 V - Frequency: 50 Hz Remarks: CE marked; nameplate clearly readable; exact configuration and completeness not verified. Auction-ID: A7-46477-6

Fails to start, drive defective - 741H- can be loaded for transport Auction-ID: A3-43524-10005

Internal number: 28273, platform extension: 90 cm to extend the platform length to 3.20 m, foldable railing to reduce the clearance height to 1.94 m, with anti-hole protection, eye-fastening for the safety harness, abrasion-resistant solid rubber tyres, ground clearance: 9 cm, climbing ability: 25 % Auction-ID: A1-46342-23

Working length 2000 mm Working width 360 mm Roll width 360 mm Roll diameter 60 mm Load capacity 800 kg Height adjustment 650 - 950 mm Machine weight approx. 0.045 t Dimensions L x W x H 2.07 x 0.48 x 0.21 m Condition: never used / new (5) Auction-ID: A7-46460-569

Internal number: 69189, rotatable work cage, swivel range: 360° (endless), swing axle, swivel carriage overhang: 1.42 m, ground clearance (middle): 30 cm, climbing ability 45 %, with fasteners for the safety harness, foamed off-road tires, for outdoor use, for collection a low-loader with its own ramps is mandatory! Auction-ID: A1-46342-51

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3469

Internal number: 28292, platform extension: 1 m to extend the platform length to 3.26 m, foldable railing to reduce the clearance height to 1.73 m, with anti-hole protection, eye-fastening for the safety harness, abrasion-resistant solid rubber tyres, climbing ability: 30 % Auction-ID: A1-46342-6

Internal number: 69116, with perforated protection, fastening for the safety harness, abrasion-resistant solid rubber tyres, ground clearance (retracted): 6.5 cm, climbing ability: 25 %, compact dimensions, almost silent operation, ideal for indoor use Auction-ID: A1-46342-28

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/YA0qK5c_LvY - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 2020 24V 4PzS 500Ah, good performance measured with 24.7V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-349

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/4xJHbE9sQV0 - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 10/04/2017, 24V 3PzS 345Ah, very good performance measured with 25.1V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-466

Internal number: 69242, transport length with bent arm can be reduced to 7.60 m, rotatable work cage, swivel range: 360° (endless), swing axle, swivel carriage overhang: 1.15 m, ground clearance (middle): 38 cm, climbing ability 45 %, with fasteners for the safety harness, foamed all-terrain tires, for outdoor use, for collection a low-loader with its own ramps is mandatory! Auction-ID: A1-46342-50

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/LjptB6YDkRQ - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery:05/2016 24V 5PzS 625Ah, very good performance measured with 24.9V - Triplex mast with full free lift - 3rd valve, sideshift - Roof pane - Warning light orange - Comfort seat Auction-ID: A1-45451-115

does not start, drive defective - lights missing - 801h - can be loaded for transport Auction-ID: A3-43524-10004

Internal number: 28464, platform extension: 91 cm to extend the platform length to 2.54 m, foldable railing to reduce the clearance height to 1.73 m, with anti-hole protection, eye-fastening for the safety harness, abrasion-resistant solid rubber tyres, ground clearance (centre): 6 cm, climbing ability: 30 %, only for indoor use Auction-ID: A1-46342-36

Type: Coupé Year of production: 2004 Mileage: 311,000 km Engine capacity: 2148 cm³ Power: 150 HP Fuel type: Diesel Transmission: Manual Number of doors: 3 Color: Burgundy (Bordowy) VIN: WDB2037081A712156 Auction-ID: A7-46319-23

OKUMA CNC Lathe Serial Number: 131693 Power: 45 kW Control: OKUMA OSP-P200L 2 axes + C Diameter on bed: 620 mm Diameter on trolley: 420 mm Distance between points: 1270 mm Chainring: 400 mm Bar capacity: 80 mm Spindle speed: 35–3500 rpm 12-position motorized turret type VDI Fast feeds: X 20 m/min, Z 25 m/min MT5 tailstock Includes chip extractor and presetting Untested operation This item is delivered loaded by truck. The costs of dismantling and loading are borne by the buyer. Auction-ID: A7-46053-11

Youtube function and status video: https://youtu.be/lYqQRQ0mabk Former Linde service device Service valid until 01/2027 UVV valid until 01/2027 Battery: 11/10/2019 24V 5PzS 625Ah, with very good performance; measured with 25.03V - Trplex mast with full free lift - 3rd valve; Sideshift - Facelift model with tilt angle display (practical for sensitive goods) Auction-ID: A1-45451-192

General information: • Brand: Saelens • Type: S3500D • Year of construction: 2004 • Chassis number: 2600002TZ / 53 • PVG number: R00446 • Type-approval number: R/00360 Technical specifications: • Number of axles: 2 • Suspension: Mechanical • Tare (mass ready to drive): 1,660 kg • Maximum Gross Vehicle Mass (GVW): 2,600 kg • On the certificate of conformity: 3,500 kg HTG • Coupling: KNOTT K17-A (4-ball coupling) • Permissible nose weight: 150 kg • Permissible axle load: 2 × 1,600 kg • Braking system: Unbraked in MTM 0, braked at higher MTM • Color: Not specified in the documents Registration details: • Date of first occupation: 02/04/2004 • Last registration in DIV: 09/08/2011 Auction-ID: A3-44483-11708

Opel Combo light truck Isuzu diesel Compact van with strong Isuzu engine. Specifications 1.7 diesel 1870 cc Euro 3 1 + 1 seats 155150 km 29/03/2001 Chassis number W0L0SBF25130253 State Starts and drives Lots of rust Exhaust defective Ignition switch problem temporarily solved Battery faulty Standing still for a long time Extra Mechanically simple Good for project or export Important information Vehicle sold in current condition without warranty. Start and drive does not guarantee roadworthiness or long distances. Description is indicative and non-binding. . Auction-ID: A3-44483-11909

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/3eb8PQxBTuk - Former Linde full-service device - Battery: 44/2023 48V 375Ah, very good performance measured at 25.8V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-367

ATTENTION! Vehicle is in Poland but can be brought to BE by seller for a fee! Auction-ID: A3-43524-13001

Machine Vise Dimensions of elongated holes on the side: 460 x 14mm Dimensions of slotted holes at the front: 250 x 14mm Jaw width 200 mm Clamping range 210 mm Clamping height 55 mm Weight 34.5 kg Condition: never used / new (5) Auction-ID: A7-46460-615

Internal number: 28267, platform extension: 90 cm to extend the platform length to 3.20 m, foldable railing to reduce the clearance height to 1.94 m, with anti-hole protection, eye-fastening for the safety harness, abrasion-resistant solid rubber tyres, ground clearance: 9 cm, climbing ability: 25 % Auction-ID: A1-46342-19

Internal number: 28467, platform extension: 91 cm to extend the platform length to 2.54 m, foldable railing to reduce the clearance height to 1.73 m, with anti-hole protection, eye-fastening for the safety harness, abrasion-resistant solid rubber tyres, ground clearance (centre): 6 cm, climbing ability: 30 %, only for indoor use Auction-ID: A1-46342-37

Internal number 69472, platform height 9.14 m, rotating work cage, cage boom, solid rubber tires, white tires, a low-loader with its own ramps is mandatory for collection! Auction-ID: A1-46342-53

Internal number: 28318, platform extension: 90 cm to extend the platform length to 3.20 m, foldable railing to reduce the clearance height to 1.82 m, with anti-hole protection, eye-fastening for the safety harness, abrasion-resistant solid rubber tyres, ground clearance: 9 cm, climbing ability: 25 % Auction-ID: A1-46342-17

MERCEDES-BENZ C 220 CDI (W203) – Sedan General data: VIN: WDB2030071F470141 Body type: Sedan Number of doors: 4 Mileage: 361000 km (German registration) Engine: Type: Diesel, turbocharged Displacement: 2148 cm³ (2.2 CDI) Engine code: OM646 Cylinders: 4 (in-line) Power: 90 kW (122 HP) Torque: approx. 270 Nm Drivetrain: Drive: Rear-wheel drive (RWD) Gearbox: Manual Performance: 0–100 km/h: approx. 11.5 s Top speed: approx. 200 km/h Fuel consumption (combined): approx. 5.5 – 6.5 l/100 km Dimensions: Length: approx. 4526 mm Width: approx. 1728 mm Height: approx. 1426 mm Wheelbase: 2715 mm Weights & capacities: Vehicle weight: approx. 1450 – 1500 kg Fuel tank capacity: 62 L Trunk capacity: approx. 455 L Description: Mercedes-Benz C-Class (W203) sedan equipped with a reliable OM646 diesel engine. Suitable for everyday driving and long-d ...

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/BeUnCendmDs - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 08/2021 24V 3PzS 375Ah, very good performance measured with 25.3V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-306

Internal number: 28263, platform extension: 90 cm to extend the platform length to 3.20 m, foldable railing to reduce the clearance height to 1.94 m, with anti-hole protection, eye-fastening for the safety harness, abrasion-resistant solid rubber tyres, ground clearance: 9 cm, climbing ability: 25 % Auction-ID: A1-46342-24

Industrial tray sealer from the renowned brand Reepack, suitable for packaging vegetables, fruit, meat and other food products. This machine is equipped with a conveyor belt and film system and can be used for gas packaging (MAP) in addition to standard sealing, which significantly extends the shelf life of products. The machine has a user-friendly ESA control with adjustable parameters such as temperature and process settings. Application: Packaging of vegetables, fruit, meat, fish, meals - Functions: Sealing trays with foil, Possibility of gas packaging (MAP – Modified Atmosphere Packaging), Automatic and manual mode, Conveyor belt infeed and output, Foil roll holder on top - Control: ESA VT60 display/controller, Adjustable temperature and parameters, Emergency stop present - Technical data: Power supply: 400V, Frequency: 50 Hz, Phase: 3~ Current: max. 22 A - Components: Vacuum pump: ...

Please note the machine needs to be collected on Tuesday 26th May. Seller can assist with loading with prior notice if required. Full machine specification can been viewed on the PDF link. This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-46471-1

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/0X9SfMVZ7Do - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 24V/3PzS/375Ah, good performance measured with 24.5V Auction-ID: A1-45451-345

-Front linkage -Front PTO -Top link in the front -Hydraulic top link at the rear -DW valve in front -4DW rear valves -Adjustable tow bar -Air brakes -Oil brakes -PTO 540/750/1000 -Reversing device -No documents Auction-ID: A3-43524-30087

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/x3tg9I5ps6k - Former Linde full-service device - Battery: 44/2023 48V 375 Ah, very good performance measured with 25.4V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-318

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/D-cJO92WeE0 - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery:08/03/2024 24V 3PzS 375Ah, very good performance measured at 25.4V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-322

Air conditioning Cab suspension Charger 2022 6 cylinders Auction-ID: A3-43524-39067

new and unused charger in orig. Very high quality, shockproof IP66 Extreme Waterproof With 220V plug, WITHOUT Rema plug officially for batteries with 300-500Ah, but works up to 800Ah Delivery by freight forwarder possible on request. Auction-ID: A1-45451-4850

HAMER UNI-1000 automatic thermoforming, filling and sealing machine, designed for single-dose packaging (liquid products such as oil, cosmetics, etc.). Key features: Pressure and vacuum thermoforming Contact heating system Heat sealing station 3-head dosing system Die-cutting and cross-cutting system Scrap ejection system Integrated marking system Touch Screen Control (Delta HMI – GP-477R) Technical data: Brand: HAMER Model No.: UNI-1000 Serial number: A-10535 Suitable for the production of single-dose containers in the food, cosmetic or pharmaceutical sectors. Compatible with food-grade materials such as PVC/EVOH/PE films. Approximate dimensions: Length: 4,000 mm Width: 1,500 mm Height: 2,000 mm Approximate weight: 2,000 kg Installed in a clean production environment. Possibility of on-site inspection. Auction-ID: A7-46053-5

Internal number: 28593, platform extension: 1.27 m to extend the platform length to 3.77 m, foldable railing to reduce the clearance height to 1.94 m, with anti-hole protection, eye-fastening for the safety harness, abrasion-resistant solid rubber tyres, climbing ability: 25 %, suitable for indoor and outdoor use Auction-ID: A1-46342-29

Power: 80 kW (~109 hp); 1.6 gasoline; 1,587 cm³ Operating parameters: Manual gearbox; mileage 146,000 km; VIN VF33BNFUC83742922 Workpiece capacity: 2 doors; cabriolet (CC, retractable hardtop); 4 seats Supported edges: N/A Edge types: N/A Included equipment: Standard road equipment (details N/C) Compliance: EU road approval Power supply: Gasoline Year/Manufacturer: 2004 / Peugeot – 307 CC Remarks: Used condition; petrol engine with manual transmission; convertible body version Compact 2-door convertible with 1.6 petrol engine and retractable hardtop. Auction-ID: A7-46319-22

Internal number: 28466, platform extension: 91 cm to extend the platform length to 2.54 m, foldable railing to reduce the clearance height to 1.73 m, with anti-hole protection, eye-fastening for the safety harness, abrasion-resistant solid rubber tyres, ground clearance (centre): 6 cm, climbing ability: 30 %, only for indoor use Auction-ID: A1-46342-7

Bolzoni Auramo side shift fork positioner, front work lights, flash light, gold edition Auction-ID: A3-43525-280

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/Lxz-e8CnyB4 - Former Linde full-service device - Battery: 44/2023 48V 375Ah, very good performance measured at 25.4V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-311

Double bench grinder: Grinding grit: 36 and 80 Grinding wheel diameter max. 200 mm Grinding wheel width 32 mm Mounting diameter 30 mm Connection voltage 230 V Motor power 0.9 KW Condition: never used / new (5) Auction-ID: A7-46460-602

Internal number: 28256, platform extension: 0.90 m to extend the platform length to 3.20 m, foldable railing to reduce the clearance height to 1.96 m, with anti-hole protection, eye-fastening for the safety harness, abrasion-resistant solid rubber tyres, climbing ability: 25 %, suitable for indoor and outdoor use Auction-ID: A1-46342-48

• Max. permissible mass: (GVW) 44,000 kg • Axle loads: 3 × 9,000 kg • Fifth wheel pressure: 17,000 kg • RDW Proof of conformity available • NL registration • Permission to drive by road until 13/01/2026 Attention! Central belt of tipper on the left side is flat! Needs to be replaced! Auction-ID: A3-44483-13571

Brand: Atlas Copco Type: GA37 VSD Serial Number: API57877 Year of construction: 2008 Power: 37 kW Max pressure: 13 bar Flow rate: ± 7.25 m³/min Voltage: 400V – 3 phase Speed: ± 3730 rpm Weight: ± 1075 kg Extra info (very important!) Operating hours: 39,627 hours Last service: 30-07-2024 Auction-ID: A3-43525-11843