tetra pak 200 used for sale

Platforms, maximum height 11.50 m, Maxim two people 215 kilos and 55 g kilos has material Auction-ID: A1-45975-27

Nominal volume 180 l, usable volume 120 l, rotation speed control, 100-215 1/min, dumping angle 180 °, tank capacity 10 l, pressure 180 bar, space requirement 2550x2300x2700 mm Auction-ID: A1-46045-126

Whiteboard approx. 200x120 cm, with drawing board table model

The excavator bucket is in used but working condition. Auction-ID: A3-43520-34007

Measuring range: 250 - 450 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 170 x 70 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-94

Car Trailer ANSSEMS HKB 2000, official Kennz. HBS-FS 40, EZ n. known, ZB I was available at the time of inventory n., permissible. GG 2,000 kg, FIN XLJ00000020002121, platform approx. 300x180 cm, railing all around, vehicle registration document + vehicle registration document is missing, HU 03/27, HU report is missing

Working width 2000mm - Adjustable width cutting machine - Hudraulic lifting arm - Everything seen and tested in working condition - also remains in place until disassembly so that testing can be done before disassembling the machine. For questions about the machine, please send an email to info@troostwijkvavato.com stating the auction number and lot number. Auction-ID: A3-43519-16518

Type: Screw compressor Model: Kaeser SK 19 YOM: 2005 Rated power: 15 kW Air flow: 2260 l/min Max. pressure: 11 bar Working hours: 28,000 h Time left to maintenance: 2500 h Dimensions (D x W x H): 812 x 1117 x 914 mm Weight: 300 kg Condition: Regularly maintained Operating manual not available. Auction-ID: A7-45988-18

Including labeling machine - Maximum processing of carpets 100cm x 120cm Auction-ID: A3-43519-16524

Measuring range: 250 - 450 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 170 x 70 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-284

4 UNITS/SETS OF SDM0070 PACKED TOGETHER. A SINGLE SDM0070 CORRESPONDS TO: Measuring range: 250 - 450 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 170 x 70 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0070 PACKED TOGETHER: 370 x 680 x h70 mm - 8 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-48

Rated power: 15 kW Air flow: 2500 l/min Max. pressure: 11 bar Time left to maintenance: 3000 h Working hours: 8076 h Dim. (LxWxH): 780 x 1480 x 1255 mm Weight: 487 kg Auction-ID: A7-45988-15

4 UNITS/SETS OF LON0024 PACKED TOGETHER. A SINGLE LON0024 CORRESPONDS TO: Chuck diameter 200 mm with 4 independent jaws up to 2100 rpm. Hole 70 mm, screw distance 112 mm (4 - M10). Height 75 mm, with claws 107.5 mm. Item size 200 x 200 x 107.5 mm. Item weight 15 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 260 x 260 x 220 mm; Approx. Weight: 15kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x LON0024 PACKED TOGETHER: 260 x 1040 x h220 mm - 60 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-215

Suitable for crimping tools Ø 3 – 32 mm (h6), Version: Comfort NG with NG coil Equipped with: 3-fold ISO shrink holders and accessories, Power approximately: 13 kVA, Clamping time approx. 5 seconds, Compressed air required (approx. 2 bar, dry), Included: Haimer Speed Cooler, type: VWK 7/1S. Auction-ID: A1-45979-6

Measuring range: 50 - 160 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-197

Chuck for self-centering lathe 3 + 3 jaws 200 mm, 2000 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws Machine condition: unchecked. Approx. Transport dimension: LxWxH 220 x 280 x 280 mm; Approx. Weight: 20kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-174

4 UNITS/SETS OF SDM0068 PACKED TOGETHER. A SINGLE SDM0068 CORRESPONDS TO: Measuring range: 50 - 160 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0068 PACKED TOGETHER: 370 x 580 x h65 mm - 8 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-57

Chuck for self-centering lathe 3 + 3 jaws 200 mm, 2000 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws Machine condition: unchecked. Approx. Transport dimension: LxWxH 220 x 280 x 280 mm; Approx. Weight: 20kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-162

The long-hole drill is in used but working condition. Always been well maintained. Auction-ID: A3-43519-34006

4 overview photos to determine the size of the machine - afterwards photos per floor what happens to the carpet. Starting with the entrance with the pallet truck - here there is a lift in the ground that raises the pallet, a machine operator only has to fold the carpet onto the belt to send to the roll-up machine. Then it is rolled up and pushed to the middle part via hydraulic sliding arm in roll. Once in the middle, you can choose to place the carpet in a plastic packaging with/or without. After packing the roll, we see the end result in the photo (carpets in the end photo purely for illustration purposes and therefore not included, as well as the label printers that are in front of the machine are not included) Machine consists of 2x roll-up line and 1x packaging line. So the first photos are in mirror image the same for roll-up line 2. Auction-ID: A3-43519-16520

Serial Number: 00826 Voltage: 400 V Max. Power: 230 kVA Auction-ID: A7-46287-5

Manufacturer: Mercedes-Benz (DaimlerChrysler) Type: Actros 1848 / 952.07 Vehicle type: Airfield fire engine (FLF 24/25-5), Fire brigade Body manufacturer: Ziegler Registration date: 10.07.2000 Propulsion: Diesel, V8 engine, 15,928 cc Power: 350 kW (476 hp) Transmission: Telligent 16-speed (semi-automatic) Axle configuration: 4x4 all-wheel drive, differential locks front/rear Mileage: approx. 62,200 km (read) Permissible total weight: 18,000 kg Curb weight: approx. 13,500 – 14,000 kg (not verified) Tyres: 395/85 R20 Michelin XZL, approx. 80–90 % tread Extinguishing technology Ziegler \"Power Foam Pro\" Water tank: approx. 2,480 litres Foam compound tank: approx. 510 liters Powder extinguishing system: approx. 250 kg CO₂ extinguishing system: approx. 480 kg Roof monitor / water cannon available Front monitor with extinguishing platform (load app ...

Docking station with PowerCom control; sound booth; without the TimBird Auction-ID: A1-43429-77

Carl Zeiss Jena ZKM 02-250 Measuring Microscope with Metronics Quadra-Chek 2000 Manufacturer: Carl Zeiss Jena / Metronics Model: ZKM 02-250 / Quadra-Chek 2000 Condition: used Description For sale: complete workstation for precision optical measurement applications (metrology / quality control), consisting of a Carl Zeiss Jena ZKM 02-250 measuring microscope with Metronics Quadra-Chek 2000 digital readout and evaluation system, as shown in the photos. This setup is suitable for dimensional inspection, geometric measurements, and optical control of small components in quality departments, toolrooms, and measuring laboratories. Travel ranges Measuring system / electronics The Metronics Quadra-Chek 2000 is a digital readout and evaluation unit used with profile projectors and measuring microscopes. Main functions include: • 2D measurements (and 2D/3D applications depending on sy ...

Serial number: 00219 Max. load capacity: 350 kg Storage area: approx. 900 (1050) x 510 mm Auction-ID: A7-46287-184

Stored in working condition. The buyer must provide his own transport. Elevator available to charge it. Auction-ID: A3-43519-17033

Ideal for planting hardwood. 30-50cm. Planned with hydraulic drive. Plant spacing can be controlled electronically hydraulically. Front tiller blade Auction-ID: A3-43520-6036

The team is in good and working condition. Working width is variable from approx. 1.2 m to 4.0 m . Auction-ID: A3-43520-34002

with accessories Auction-ID: A1-43429-89

Chuck for self-centering lathe 3 + 3 jaws 200 mm, 2000 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws Machine condition: unchecked. Approx. Transport dimension: LxWxH 220 x 280 x 280 mm; Approx. Weight: 20kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-287

Machine number: A0045A0007 Operating voltage: 400 V Frequency: 50 Hz Connection: 17 kVA Rated current: 35 A Travel X-axis: 2015 mm Travel Y-axis: 1215 mm Max. material thickness: 6.4 mm Max. workpiece weight: 150 kg Max. punching force: 165 kN max. hold-down force: 10 kN Max. stroke sequences punching Hole spacing 1 mm: 600 rpm Signing: 1300 rpm Max. axis speed X-axis: 80 m/min Y-axis: 55 m/min simultaneous: 97 m/min max. acceleration X-axis: 10 m/qs Y-axis: 5 m/qs C-axis punching/thread forming: 175/min Number of positions in the linear magazine: 17 Number of tools/claws: 15/2 Number of tools when using multi-tool/claws: 15-150/2 Number of claws location/2: max. 2/3 Reject parts: max. part size via disc chute: standard 180 x 150 mm max. part size via disc chute with movable support table: 460 x 500 mm Accuracy position deviation: +- 0.1 mm Average position spreading width: +- 0.03 mm in ...

Chuck diameter 200 mm with 4 independent jaws up to 2100 rpm. Hole 70 mm, screw distance 112 mm (4 - M10). Height 75 mm, with claws 107.5 mm. Item size 200 x 200 x 107.5 mm. Item weight 15 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 260 x 260 x 220 mm; Approx. Weight: 15kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-330

The sliding table saw is in good condition and is functional. Auction-ID: A3-43519-34053

Manufacturer: Iveco Model: Eurocargo ML 140 E 24 W Vehicle type: Truck three-way tipper with loading crane Year of manufacture: 2005 Registration date: 28.02.2005 Mileage: approx. 434,500 km Engine power: 176 kW Displacement: 5,880 cm³ Fuel Type: Diesel Transmission: Manual Drive: All-wheel drive (4x4) Axles: 2 Permissible total weight: 14,000 kg Curb weight: 8,530 kg Payload: approx. 5,470 kg Body: Meiller three-way tipper Loading crane: Atlas AK 65.2 Year of crane construction: approx. 2005 Crane reach: up to approx. 6.4 m Lifting capacity: max. approx. 3,100 kg (depending on crane) Tyres: 395/85 R20 Tire condition: approx. 15 mm tread PTO available Trailer hitch Rockinger Air conditioning available Cruise control available Electric windows available Electric mirrors available Heated seats available Air-suspended driver's seat ...

Spray tank + electric motor No data on device Sprayer with electric motor 12 Volt + hand lance Auction-ID: A3-43520-5008

Machine number: 20603 Operating voltage: 230 V Frequency: 50 Hz Rated current: 10 A Diameter of the turntable: 1500 mm Auction-ID: A7-46287-106

Measuring range: 160 - 250 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-305

Serial number: 1392 Filling weight: 0.67 kg Operating pressure: 18 bar Operating voltage: 230 V Frequency: 50 Hz Rated current: 4.9 A Auction-ID: A7-46287-102

Jungheinrich ETV 216 Reach Truck – Electric – Keyless – suitable for material handling and warehouse use – Technical specifications: Brand/Type: Jungheinrich ETV 216 Version: Reach truck Drive: Electric Lifting capacity: approx. 1,600 kg Steering system: Seated driver - Technical condition: General technical condition unknown due to lack of key Features could not be tested Visually complete machine (Battery good) - Equipment: Overhead guard Forks provided Driver's seat available Work lights mounted - Special features: No key available Auction-ID: A3-43519-10658

Machine number: 043.082 Max. sanding belt width: 150 mm Auction-ID: A7-46287-12

In full working condition - Working width 2000mm - cutting width adjustable - Hydraulic lifting arm - Everything seen and tested in working condition - also remains in place until disassembly so that tests can be carried out before disassembling the machine. For questions about the machine, please send an email to info@troostwijkvavato.com stating the auction number and lot number. Auction-ID: A3-43519-16517

ATLAS COPCO GA 5 FF – Screw Compressor General data: Manufacturer: Atlas Copco Model: GA 5 FF Machine type: Screw compressor with integrated air dryer and air receiver Year of manufacture: 2003 Operating hours: approx. 38000 h Condition: Serviced by Atlas Copco Service history: Available Technical details: Rated power: 5.5 kW Working pressure: 8.5 bar Dimensions: Approx. 1200 x 800 x 2100 mm (including packaging) Description: Industrial screw compressor Atlas Copco GA 5 FF equipped with integrated air dryer and air receiver. Designed for reliable compressed air supply in workshop and industrial environments, offering efficient operation and compact design. Auction-ID: A7-45988-9

Chuck for self-centering lathe 3 + 3 jaws 200 mm, 2000 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws Machine condition: unchecked. Approx. Transport dimension: LxWxH 220 x 280 x 280 mm; Approx. Weight: 20kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-329

Working width 4500 mm; throughput 3-18 m/min; 2x5 machining sensors; and accessories Auction-ID: A1-43429-86

Serial number: 2560 Max. operating pressure: 11 bar Operating temperature: min. -10°C, max. +80°C Content: 500 l Auction-ID: A7-46287-101

Maximum tool weight: 7kg, Maximum tool length: 300mm. Equipped with: (1x) 16-way tool changer, (1x) chip conveyor, (1x) cooling/filter unit, (1x) spindle cooler, (1x) external cooling unit. Auction-ID: A1-45979-4

The cultivator is in used but working condition. Approximate working width: 4.5 m Auction-ID: A3-43520-34074

Fenwick-Linde P60Z Electric Tractor (48V) a powerful and compact solution for moving heavy loads in your warehouse or on your site? This Linde P60Z is a workhorse known for its durability and easy handling. Main specifications: Brand/Model: Fenwick-Linde P60Z (French solidity) - Capacity: Powerful 48 Volt installation - Pulling force: Up to 4500 N (ideal for heavy trailers) - Own weight: Very stable (approx. 1130 kg including battery) - Payload: Can also take 150 kg on board - Linde is known worldwide as the \"Mercedes among forklifts and tractors\". The P60Z is extremely manoeuvrable, making it perfect for narrow aisles and busy work environments. Thanks to the 48V system, the machine delivers constant performance, even with intensive use. Ready for immediate use. Can be loaded by seller for transport if necessary Auction-ID: A3-43519-10661

Sold without battery; therefore no hours readable; Auction-ID: A1-46030-16

Measuring range: 50 - 160 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-230