130,231 used machines on RESALE, but how to find them? Machine Search
Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input -Manufacturer: Siemens, Simatic S7 digital input electronic modules ET 200S 4 pieces -Electronics module: type 6ES7 138-4CA00-0AA0 -Terminal module: 6ES7 193-4CE30-0AA0 -Price/delivery: complete -Dimensions: 130/20/H75 mm -Weight: 0.1 kg/pc
Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: HADEF, electric chain hoist with chassis and connection cable/main switch -Chain hoist: Type CH3, load capacity 2000 kg -Main stroke: 5 m/min -Fine stroke: 1.25 m/min -Chain length: 3.45 m -Crane chassis: Carl Stahl type 208/05, maximum beam width 232 mm -Number: 8x chain hoist available -Price: per piece -Dimensions: see photo and technical drawing -Transport dimensions: 1000/700/H540 mm -Weight: 90 kg/unit
Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley -Manufacturer: Konecranes, crane chassis -Beam width: up to 242 mm -Load capacity: 2000 kg -Dimensions: see technical drawing in the photos -Dimensions: 335/300/H255mm -Weight: 19 kg
Gear motor, electric motor, electric gear motor, gear motor Movigear classic -Manufacturer: SEW-Eurodrive, gear motor Movigear classic -Type: MGFAT2-DSM/WA/PE -Speed: 3.6...36.2 rpm i= 55.25 -Connection voltage: 400 V -Torque class: 200 Nm -Hollow shaft: Ø 30 x 90 mm -Protection class: IP66 -Dimensions: 250/150/H300 mm -Weight: 14kg
Mechatronic drive system, gearbox, spur gear, angle gear, worm gear, Movigear -Manufacturer: SEW-Eurodrive, Gearbox Movigear Type MGFAT2-DSM-DSC-B/IV/WA/PE/A i 55,25 -Speed: 3.6 to 36.2 rpm -Hollow shaft: Ø 30 x 90 mm -Individual components: see photos -Number: 3x gearbox available -Price per piece -Dimensions: 230/170/H365mm -Weight: 16 kg/piece
DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor -Manufacturer: Kählig, DC gear motor -Type: M63x60/I SN31 IGO500/2 -Voltage:40V -Torque: 324 N/cm -Speed: 200 rpm -technical data: see photo type plate -Shaft: Ø 10 x 27 mm -Number: 11x engines available -Price per piece -Dimensions: 210/90/H100 mm -Weight: 2.6kg/pc.
gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: Motovario, adjustable gear motor -Gearbox: Type TKR / 5 40 - 200 rpm -Motor: EM type MA 71 b4 0.37 kW -Shaft: Ø 24 x 50 mm -Design: B3 -Dimensions: 465/190/H210 mm -Weight: 21 kg
Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected power: kW -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg
Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Hydraulic unit: with hydraulic tank, portable -Hydraulic pump: pressure up to 200 bar, unfortunately without type designation -Flow rate: 1.2 l/min -Motor: EP 1.1 kW / 1410 rpm -Hydraulic tank: with shut-off valve -Individual components: see photos -Dimensions: 400/220/H430 mm -Weight: 30.5 kg
Controller, memory module, PLC controller, analog assembly, analog module, analog output, interface module, electronic modules, PLC controller, analog input module -Manufacturer: Siemens, Simatic S7 Analog Input Module -Type: 6ES7 134-6GB00-0BA1 -Number: 4 modules available -Price: per piece -Dimensions: 70/15/H55 mm -Weight: 0.1 kg/pc
Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, communication processor -Manufacturer: Siemens Simatic S7 ET 200SP Interface Module -Type: 6ES7 155-6AU01-0CN0 -Number: 2 modules available -Price: per piece -Dimensions: 115/45/H75 mm -Weight: 0.1 kg/pc.
Controller, memory module, PLC controller, analog assembly, analog module, analog output, interface module, electronic modules, PLC controller, analog input module -Manufacturer: Siemens, Simatic S7 ET 200SP Analog Input Module with Base Unit -Type: 6ES7 134-6GB00-0BA1 -Base unit: SIMATIC ET 200SP 6ES7193-6BP20-0BA0 -Number: 3 modules available -Price: per piece -Dimensions: 140/20/H70 mm -Weight: 0.1 kg/pc
Controller, memory module, PLC controller, analog assembly, analog module, analog output, interface module, electronic modules, PLC controller, analog input module -Manufacturer: Siemens, Simatic S7 ET 200SP Analog Input Module with Base Unit -Type: 6ES7 134-6FB00-0BA1 -Base unit: SIMATIC ET 200SP 6ES7193-6BP00-0BA0 -Quantity: 1 module available -Dimensions: 120/20/H75 mm -Weight: 0.1 kg
Controller, memory module, PLC controller, analog assembly, analog module, analog output, interface module, electronic modules, PLC controller, analog input module, communication module -Manufacturer: Siemens, Simatic S7 ET 200SP communication module with base unit -Type: 6ES7 137-6BD00-0BA0 6ES7137-6BD00-0BA0 -Base unit: SIMATIC ET 200SP 6ES7193-6BP20-0BA0 -Quantity: 1 module available -Dimensions: 140/20/H70 mm -Weight: 0.1 kg
Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, communication processor -Manufacturer: Siemens Simatic S7 ET 200SP Interface Module -Type: 6ES7 155-6AU01-0BN0 6ES7155-6AU01-0BN0 -Number: 3 modules available -Price: per piece -Dimensions: 115/45/H75 mm -Weight: 0.15 kg/pc.
Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Strunguri Arad, lead screw and feed screw lathe type SNA560x2000 -Turning length: 2140 mm -Turning diameter over bed: 600 mm -Turning diameter over support: 330 mm -Spindle bore: Ø 65 mm -Spindle speeds: 16 - 1600 rpm -Three-jaw chuck: Ø 310 mm -Tailstock mount: MK5 -Drive motor: 11 kW -Accessories included, see photos -Dimensions: 3700/1050/H1400 mm -Weight: 3600 kg
Counting scale, scale, parcel scale, weighbridge, floor scale, pallet scale, platform scale, drive-through scale -Handover: in its current condition as inspected -Scale: without control and terminal -Manufacturer: Tedea-Huntleigh, Heavy-duty scale, floor scale, pallet scale -Type: 3410 -Weighing range: up to max. 2000 kg -Load cell: 4x Tedea-Huntleigh 500 kg -Dimensions: 1500/600/H80 mm -Weight: 80 kg
Double scissor lift table, lift table with double scissor mechanism, scissor lift table, scissor lift platform, scissor lift platform, single scissor lift table -Manufacturer: KAISER KRAFT, Scissor lift table type M2000 -Load capacity: 2000 kg -Platform: 1000 x 2000 mm -Dimension when retracted: Height 805 mm (without feet) -Extended dimension: Height 3400 mm -Transport dimensions: 1000/2000/H1050 mm -Empty weight: 1245 kg
Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as seen, see photos -Condition: upper bending tool has been welded -Manufacturer: LOTZE Swivel bending machine type HDZKE20 -Drive: mechanical -Max. working width: 2000 mm -Max. sheet thickness: 6 mm -Max. intermediate dimension: 235 mm -Connected load: 5.2 kW -Dimensions: 1340/3460/H1400 mm -Weight: 3700 kg
The machine is not working and needs to be repaired Auction-ID: A7-45252-8
Everything works. 20 HP Kohler petrol engine. Weight: 650 kg. Milage: 181 hours Auction-ID: A7-40553-1
not working, batteries in low condition Auction-ID: A7-45252-14
\"Engine: LPG Load capacity: Nominal load capacity is 4500 kg. Drive: Hydrostatic, ensuring smooth direction changes and precision. New chain The forklift has new wheels, hydraulic hoses and a starter motor.\" Auction-ID: A7-40553-4
Refrigeration Dryer Kaeser TC 36 Air flow rate 3,900 l/min Manufacturer: Kaeser Machine number 1890 Type TC 36 Year of manufacture 2007 max. pressure 16 bar Power consumption 1.4 kW Delivery throughput 3,900 l/min Refrigerant R 134 a with level-controlled steam trap Test run carried out lxhxw 78x66x101 cm Weight 170 kg Loading costs 50.00 Euro Auction-ID: 04J-7Y4-1
Refrigeration dryer Kaeser TE 91 Air flow rate 10,150 l/min Manufacturer: Kaeser Machine number 2349 Type TE 91 Year of construction 2008 max. pressure 16 bar Power consumption 1.15 kW Flow rate 10,150 l/min Refrigerant R 134 a with level-controlled steam trap Test run carried out lxhxw 152x106x152 cm Weight 570 kg Loading costs 75,00 Euro Auction-ID: 04J-7Y5-1
Refrigeration Dryer Atlas Copco FD 280 Air flow rate 16,800 l/min Manufacturer Atlas Copco Machine number AIF 094494 Type FD 280 Year of manufacture 2004 max. pressure 14.5 bar Power consumption 3.7 kW Delivery throughput 16,800 l/min Refrigerant R 404 A Compressed air connection 2 1/2 inches Test run carried out lxhxw 114x91x84 cm Weight 175 kg Loading costs 50,00 Euro Auction-ID: 04J-7Y3-1
Screw compressor Kaeser SK 19 Manufacturer: Kaeser Type SK 19 Machine number 2233 Year of construction 2002 max. pressure 7.5 bar Power consumption 11 kW Delivery volume 1,855 l/min Operating hours 64,145 B/h Load hours 48,778 B/h Test run carried out lxwxh 84x78x101 cm Weight 270 kg Loading costs 50.00 Euro Auction-ID: 04J-7XZ-1
Screw compressor Renner RSK 22 with refrigerant dryer Manufacturer Renner Machine number 21194 Type RSK 22 Year of construction 2009 max. pressure 10 bar Power consumption 22 kW Delivery rate 3,100 l/min Operating hours 35,160 B/h Load hours 10,416 B/h Nearest customer service in 1,986 B/h Test run carried out lxhxw 175x87x129 cm Weight 588 kg Loading costs 100,00 Euro Auction-ID: 04J-7XY-1
Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg
Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg
PLC controller, expansion module, interface module, AS-Interface actuator module, AS-Interface sensor module, connection, electronic modules, electronic block, power module -Manufacturer: Siemens, Simatic S7 Power Module ET 200S -Type: 6ES7 138-4CB11-0AB0 -Term.-Mod.: TM-P15C22-01 -Quantity: 1 module available -Dimensions: 120/21/H75 mm -Weight: 0.1 kg
Assembly table wood self-made approx. 200x100t cm, base, small contents fasteners, without the tools
Assembly workstation wood self-made approx. 200x100t cm, electrification
Mobile extraction METABO SPA 2002 D, 565 m³/h, 1.50 kW, net weight approx. 116 kg, S/N 11435314605
Carpenter's workbench approx. 200b cm, base shelf, small parts holder on the wall
Wooden work table approx. 200x84hx50t cm, with pin board
A deposit of €150.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-16
A deposit of €200.00 is required in order to bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. 1x MARK RMA15 compressor (2017) Power 3kw 49745 working hours 1x MARK 7122 MK 98 compressor (1999) Power 7.5 kw 16040 working hours 1x MARK MDX 410P dryer (2008) R404A refrigerant Quantity 0!73 kg 1x compressed air tank TER-MEC CORDIVARI RC 07 (2007) Capacity 710 liters Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-18
In order to submit a bid on this lot, a deposit of €1300.00 is required. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-9
A deposit of €1500.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Rotary table diameter 700 mm 24-position tool changer Cutting speed 15000 mm/min Fast feed speed 30000 mm/min Tables, utensils and accessories included Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-8
Lifting magnet, Load capacity 2000Kg, Magnetic area 350 x 150mm See pictures. Condition: never used / new (5) Auction-ID: A7-45761-765
Belt sander with - Contact disc: 200 x 75 mm - Continuous surface grinding table: 75 mm Belt width 75 mm Belt length 2000 mm Belt speed 37 m/sec Total power requirement 3 kW Machine weight approx. 0.105 t Space requirement approx. 1.2 x 0.5 x 1.0 m Condition: never used / new (5) Auction-ID: A7-45761-788
A powerful, reliable 2000 watt generator. Durable and energy-efficient 80cc 4-stroke engine. Ideal for travelling with a motorhome, caravan or tent. Equipped with 2 x 230V and 1 x 12V DC output. Automatic overload protection. Only 29 kilograms (!). Easy to carry or store. Compact design 49 x 28 x 40.5 cm. Noise level 58 to 95 dB. Fuel volume 3.8 liters. Fuel Euro unleaded Oil capacity 410 milliliters. (not included) Oil grade 10-W30. Operating time 5.5 hours (50% consumption). Frequency 50 Hz. Voltage 230 volts. Output 2 x 230 volts. 1 x 12 volts. 6A DC Condition: never used / new (5) Auction-ID: A7-45761-809
Scissor lift table with - Contact bar - Emergency stop - Remote control Table length 1300 mm Table width 800 mm Lifting height 1010 mm Load capacity in kg 2000 kg Min. height 190 mm Connection voltage 400 V Total power requirement 0.75 kW Lifting speed - upwards empty 40 sec. Lifting speed - downwards empty 30 sec. Machine weight approx. 0.28 t Dimensions. 1.3 x 0.8 x 0.4 m Condition: never used / new (5) Auction-ID: A7-45761-742
Belt sander with - Contact disc: 600 x 150 mm Belt width 150 mm Belt length 2000 mm Belt speed 33 m/sec Total power requirement 4 kW Machine weight approx. 100 t Space requirements approx. 1.2 x 0.5 x 0.85 m Condition: never used / new (5) Auction-ID: A7-45761-730
Compressor Delivery pressure 8 bar Effective delivery rate 250/350 L/min Boiler capacity 200l / 10bar l / bar Machine weight approx. 105 kg. Number of cylinders 2 pcs. Motor 230V / 2.2KW Dimensions L-W-H 1140 x 510 x 920 mm Condition: never used / new (5) Auction-ID: A7-45761-757
Pressa elettrica con centralina idraulica per martinetti stampo.
maximum number of results exceeded
please refine your search
1.600 € 
