tetra pak 200 used for sale

electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate -Manufacturer: Elsterwerda, magnetic clamping plate type ED 215 -Clamping surface: 200 x 150 mm -Connection: 220 Volt DC -Dimensions: 370/150/H80 mm -Weight: 14.3 kg

used spiral mixer Diosna SP 200 D, overhauled, as good as new, for 200 kg dough, 2 clocks, stainless steel kettle, stainless steel spiral, machine no. 9912-174, electrics renewed, repainted, new bearings, new V-belts

Tilting device for tilting octabies or boxes

table length: 2000 mm table width: 1000 mm table height: 920 - 1000 mm : 2000 kg height of stroke: max. 1525 mm total connected load: 1,5 kW connected load frequency: 400 V weight of the machine ca.: t Welding table on lifting table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Ribbed bottom for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping rail, guide rail, support rail, stop rail, T-slot rail -Clamping rail: with T-slot on both sides -Length: 200 mm -Groove width: 10 mm, dimensions see photo technical drawing -Dimensions: 200/55/H32 mm -Weight: 1.9 kg

Kneading Machine Spiral Kneading Dough Machine Model: Spiralo 200 A sophisticated technology ... already proven many times over! LED control with program control 2 speeds + 1x boiler counter-rotation, 3 timers Doughs from 15 to 200 kg / 10-120 kg flour Flour dust hood with protective circuit Stainless steel boiler and spiral Floor-standing machine with base plate 1 extendable tank car DGUV V3 tested Connection 400V, 13.5 kW, 32A-CEE plug Dimensions: 1020 x 1720 x 1430/1945 mm, WxDxH TOP quality and price in one machine! New machine with 24 months warranty + service package Option: Additional tank car 200 Soft starter Maintenance contract Many more spiral mixers in stock!

Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium angled conveyor belt incl. substructure Horizontal area 800mm Rising range 2,000mm Angle in the bend 45° Feed height: 300mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edges, blue FDA- Food compliant, food certificate is included Drive: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional Freely steerable transport rollers incl. parking brake Scalloped edge: 50x35mm T-40 cleats - approx. 300mm pitch 2-layer particularly transversely stable Usable width: 290mm, results as follows: Cross arrangement 70+35+290+35+70mm All our prices are net prices plus VAT. - can also be viewed under power after consultation!

Key data: 4 mm

Max. sheet thickness: 4 mm steel Adjustable angle 30-120 degrees Knife length: 200 mm Hydraulic knife clamping and locking+ Cutting depth infinitely adjustable with digital display New set of upper and lower knives installed Weight: approx. 1,000 kg

Aluminium Z conveyor belt incl. mobile substructure Horizontal range 800mm (customizable) Rising range 2,000mm (customizable) 2. Horizontal range 800mm (customizable) Angle in the bend variable, infinitely adjustable Feed height: horizontal (individual) Discharge height individually adjustable Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 0.55KW ( customizable ), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x25mm T-50 Cleat - 400mm pitch 2-layer particularly transversely stable The delivery time of an individual system is currently approx. 3-4 weeks, depending on the production effort. Our core competence lies  ...

Jacobsen M 2000 Mounted - Cylinder mower for push and PTO drive 1,000 rpm in the direction of travel turning left, three-point hitch Cat. I., approx. 210 cm working width, 3 spindles 6-blade hydraulically driven, hydraulic lifting, spindles follow the curve radius by articulated arrangement (limited). According to the previous owner, only 1 mowing season used, year of construction unknown. Other attachments - cylinder mowers make Bucher, Loipfinger, Ransomes, SABO available - see photos. Information on request, also self-propelled Ransomes motor Triple MK IV M, many Ransomes parts, including complete spindle units. ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping and disposal, environmental care, engines and more...

Clamping plate, marking plate, measuring plate, measuring table, surface plate, marking plate -Manufacturer: Stolle, clamping plate with support ribs -Length: 2005 mm -Width: 1500 mm -Plate thickness: 40 mm -Plate: with support ribs -Transport dimensions: 1500/2005/H500 mm -Weight: 1800 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1800 mm -Cross-section: 200 x 60 mm -Recording: see photos -Transport dimensions: 2060/1080/H200 mm -Total weight: 487 kg

plastic strapping, strapping tape, packaging tape, tensioning tape, plastic tape -Strapping band: Plastic strapping band 8 rolls Ovp -Type: 5 x 0.5 mm core 200 mm -Width: 5 mm -Roll: Ø 395 x 190 mm -Price/Delivery: complete -Transport dimensions: 800/800/H390 mm -Total weight: 87 kg

Swing over bed 840 mm Swing over support 530 mm Center distance 2000 mm Spindle bore 82 mm Spindle diameter in front bearing 160 mm Spindle taper - metric 100 Morse Tailstock 6 Maximum workpiece weight at the lowest speed of 6000 kg Largest blade profile 40 x 40 mm Electric motor for headstock drive 18.5 kW Machine dimensions L x W 3420 x 1880 mm Machine weight (according to the spike distance) 5700 kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: AROWA, three-jaw chuck chuck size Ø 200 mm -Passage: Ø 55 mm -Bolt circle: Ø 175 mm / M10 -Accessories: incl. 2nd set of interchangeable jaws -Dimensions: Ø200 x 105 mm -Weight: 13.8 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: HPI MEZ, hydraulic unit with double hydraulic pump -Hydraulic pump: HPI type 1BA2018/2008L10 -Engine: MEZ 7.5 kW 1450 rpm -Dimensions: 755/360/H305 mm -Weight: 94 kg

Bruderer BSTA 200 High-performance automatic punching press. max. pressure: 200 kN 20 T Speed range: 100 – 600 spm Year of construction: 1990. Feed BBV on the left side. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 mm Ram height adjustment: 51 mm Dimensions of the clamping plate (clamping plate): 510 x 400 mm Bed opening: 400 x 160 mm Max. distance of the tool width between the columns: 410 mm. Connected load: 36 kVA Power 400 V 50 Hz Control voltage: 24 V Machine dimensions: H 2540 x W 1661 x D 855 mm Machine weight: approx. 3100 kg Switch cabinet and control system. Including all original technical documentation in German.

Model: David 200 Dehairing And Flaming Machine Slaughter performance approx. 40-50 pigs/hour Pigs up to approx. 270 kg Machine body in hot-dip galvanized or stainless steel design Built-in control cabinet Roller equipped with 36 special clubs Electrical power: 5.5kW Installation dimensions of the machine in cm: Width: 240 Length: 340 Height: 250

Cloth lapper, polishing disc, grinding disc, coarse cleaning disc -Manufacturer: 3M Scotch-Brite, coarse cleaning disc type CG-DC Ovp 2 pieces -Art.No.: 61163 -Diameter: Ø 200 x 13 mm -Shipping/Price: complete -Transport dimensions: 205/3205/H35 mm -Weight: 0.3 kg

electric motor, three-phase motor -Manufacturer: Euromotori, electric motor type ASA 200LB-2 -Power: 37 kW -Speed: 2960 rpm -Shaft: Ø 55 x 110 mm -Design: B3 Protection class: Ex -Dimensions: 825/396/H570 mm -Weight: 335 kg

Tires, solid rubber tires, forklift tires -Manufacturer: Rota, solid rubber tires 2 pieces -Tire size: 200/50-10 RIM 6.50F-10 -Bolt circle: Ø 145 x 18 mm -Recess: Ø 110 mm -Price/Delivery: complete -Dimensions: Ø 440 x 200 mm -Weight: 34.3 kg/piece

Simatic panel, operator panel, machine control, interface panel, operating unit, control panel, keyboard, control panel teach pendant -Manufacturer: Xycom, Operator Panel from OMSO CD Printing Machine -Type: 2005 -Dimensions: 420/280/H315 mm -Weight: 6.9 kg

Key data: 300 mm

Mazatrol PC Fusion 640 T Travel X/Y/Z/B: 180/100/575/585 mm max. turning diameter 300 mm Bar passage 51 mm Main spindle 18.5 kW, max. 5,000 rpm Spindle nose A2-6 Sub-spindle 7.5 kW, max. 5,000 rpm Bcpr3pc7jma 16-speed turret, all stations for driven tools Max. speed: 4,500 rpm Tooleye Parts catcher Interface for bar feeder LNS Quick Load Servo III Bar Feeder Conveyor Streamware High Pressure Pump, 20 bar Coolant Temperature Control, Parker Hiross Hyperchill ICE005/230/1/5 Oil mist extraction Hainbuch Collet chuck for main and sub-spindle Tool Holder Package

Centrifugal pump, water pump, block pump, volute casing pump -Manufacturer: Ebara, centrifugal pump type CDXHM/A 200/20 -Flow rate: 80-250 l/min -Motor power: 1.5 kW -Speed: 2850 rpm -Pipe connection: see photos -Dimensions: 445/210/H240 mm -Weight: 15.7 kg

Pneumatic cylinders, air cylinders, standard cylinders, compressed air cylinders -Manufacturer: SMC, pneumatic cylinder double version each open on one side -Type: C95SDB 80-200 -Piston rod: Ø 25 mm -Stroke: 200 mm each -Pressure: max. 10 bar -Dimensions: 653/195/H130 mm -Total weight: 13.9 kg

turning diameter: 210 / 350 mm turning length: 400 mm control: Fanuc 0i-TC swing diameter: 500 mm travel -x axis: 195 mm travel -z axis: 430 mm spindle speed:: 3500 1/min bar diameter: 51 mm spindle bore: 75 mm C-Axis: 0,001 ° turret head: 12 Pos. taper in tailstock-quill: MK 4 tailstock travel: 100 mm diameter of quill: 80 mm rapid traverse X-axis: 30 m/min rapid traverse Z-axis: 30 m/min drive capacity - spindle motor: 11 / 15 kW voltage: 400 V total power requirement: 30 kVA weight of the machine ca.: 4,2 t dimensions of the machine ca.: 2,70 x 1,90 x 2,10 m chip conveyor: 2,80 x 0,60 x 1,30 m Transformer: 0,60 x 0,45 x 0,55 m - Serial-No.: M015356K2F - Machine ON: --- h - control: FANUC Oi-TC - Machine with C-axis and turret for driven tools (no driven tools in the accessories accessories available - Tool measuring arm - Parts collecting tray - Collet chuck device - 3-jaw chuck Ø ...

AUTO Mounter FLAMM 2000 Max. Working width = 2000 mm The printing plate with Micro Dots is placed on the conveyor belt and then glued to the print sleeve precisely and independently by the system. Several plates can be glued on. The setting data and are available again for the next job.

Interface, data acquisition device, test device, telemetry system, probe interface -Manufacturer: Renishaw, Probe Interface from coordinate measuring machine Stiefelmayer C 100 413514 -Type: PI 200 -Dimensions: 185/140/H90 mm -Weight: 1.5 kg

Crane block, crane hook, load hook, single hook, bottom block -Crane hook: Crane hook load capacity 2 t -Rope groove: Ø 10 to 14 mm -Dimensions: 450/180/90 mm -Own weight: 8.5 kg

Heavy-duty castors, heavy-duty wheels, tires, tires with rims, heavy-duty tires, forklift tires -Heavy-duty castors: 4 pieces, from electric forklift -Tires: Ø 200 x 80 mm -Hub: Ø 65 x 45 mm / Dimensions see photos -Shipping/Price: complete -Dimensions each: Ø 200 x 170 mm -Weight: 10.5 kg/piece

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: surface plate with adjustable feet -Length: 2000 mm -Width: 1515 mm -Plate thickness: 130 mm -Adjustable feet: Ø 300 x 670 mm -Transport dimensions: 2000/1515/H430 mm -Weight: 3150 kg

Cutter Manufacturer: Alpina Made of stainless steel Volume: 200 liters

thickness of jaw: 150 / 160 / 200 mm max. clamping width: 105 / 138 / 275 mm ca. high of jaw: 46 / 63 mm Condition: unused: New machine vices on rotating plate 360 °, provided with 180 ° degree scale from remaining stock at a special price. The body is made of high quality gray cast iron (FC-25), jaws made of rolled steel, hardened, replaceable. Mod.M 150: span: 105 mm, jaw height: 46 mm, dimensions: 600x200x160 mm, Weight: 26 kg, photos 1-3, price 270, - + VAT. Mod. M 160: with covered spindle, three-way adjustable via socket pin, Span: 275 mm, jaw height: 63 mm, dimensions: 800x270x200 mm, weight: 43 kg, photos 4-6, price 700, - + VAT. Mod.M 200: span: 138 mm, jaw height: 63 mm, dimensions: 700x260x200 mm Weight: 54 kg, photos 7-9, price 495, - + VAT. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping plate, marking-out, welding table, welding table, straightening plate, marking-out plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2000 x 1515 mm -Table height: 800 mm -Plate thickness: 130 mm -Transport dimensions: 2000/1515/H800 mm -Weight: 3250 kg

Used Stork UHT Plant – Model 2000 Reliable UHT processing plant designed for the sterilization and treatment of dairy and plant-based beverages. The Stork Model 2000 offers efficient thermal processing and is suitable for medium-capacity production of UHT products. General Information - Manufacturer: Stork - Model: 2000 - Refurbishment: Completely refurbished in 2015 - Condition: Very good used condition Technical Specifications - Capacity: 1,600 l/h - Control System: Siemens S7 PLC Suitable Products - The plant is designed for processing a wide range of UHT beverages, including: - UHT milk (plain / white) - Chocolate milk - Flavoured milk - Soya UHT drinks Key Advantages - Reliable Stork UHT processing technology - Completely refurbished in 2015 - Suitable for dairy and plant-based beverages - Equipped with Siemens S7 PLC control system - Compact solutio ...

Key data: 370 mm, 1 mm

Year of construction 11-2017 Commissioning 2018 Smooth G control Travel: X1/X2 axle: 207 /141 mm Y1/Y2 axis: 100/70 mm Z1/Z2 axle: 1,225/1,280 mm Max. swing diameter (upper turret) 370 mm Max. swing diameter (lower turret) 320 mm Max. turning diameter (upper turret) 344 mm Max. turning diameter (lower turret) 210 mm Max. bar passage: 65 mm Main spindle 22/15 kW, A2-6 spindle nose Main spindle max. speed 5,000 rpm Main spindle C-axis: 0.0001° Sub-spindle 22/15 kW, A2-6 spindle nose Sub-spindle max. speed 5,000 rpm Sub-spindle C-axis: 0.0001° 2 pcs 12-cavity turret with 12 driven tool stations Max. speed driven tools 6,000 rpm Cylinder interpolation Interface bar feeder Bar Loading Magazine, Hydrafeed Multifeed MX-1B 3-jaw chuck Kitagawa BB08 for main spindle Collet chuck Hainbuch 52 mm, axfix for sub-spindle

PLC controller, central assembly, RAM, CPU, central processing unit, central device Manufacturer: Siemens, Simatic central assembly -Type: ET 200SP F-CPU 6ES7512-1SK01-0AB0 -Dimensions: 100/80/H120 mm -Weight: 0.4 kg

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version -Length: 665 mm -Material: Steel -Quantity: 2x mounting cubes available Price: per piece -Dimensions: 665/200/H250 mm -Weight: 117 kg/unit

Silo 2 m³ volume, payload 3.2 to, dead weight 690 kg Dimensions 1200 x 1600 mm, height 2200 / 2980 mm Spout height 1100 mm Outlet NW 250 Inspection/filling lid in silo roof NW 500 Silo butterfly valve

Chuck flange, flange mount, chuck flange, drive flange, intermediate flange, chuck faceplate -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 200 mm -Bolt circle: Ø134 mm -Socket: Short cone 6, cone Ø 101 - 106 mm -Overall dimensions: Ø 200 x 145 mm -Weight: 7.6 kg

Laser welding machine with 200 watt laser power - Lamp-pumped YAG laser - Point welding machine for the finest welding tasks - for jewelry, optics, precision engineering, etc. - Welding spot from 0.1 to 3mm - For practically all metals (steel, stainless steel, silver, gold, titanium, etc.) - incl. optical microscope (10x) - Additional CCD microscope with reticle - Current, pulse width, repetition rate, frequency at the controller adjustable - incl. inert gas connection - Nd3+:YAG laser (metal cavity with xenon flash lamp) - Lamp-pumped Nd:YAG laser with 200Watt power - External cooling - Power connection 230Volt / 32 Amp. Machine dimensions approx.: Width: 60cm Height: 120cm Depth: 110cm Weight: approx. 150kg

Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 200 mm -Mount: Short cone 4 / Cone Ø 61-63 mm Short cone flange with camlock fastening -Bolt circle: Ø 82 mm -Through hole: Ø 41 mm -Dimensions: Ø 200 x 125 mm -Weight: 9.5 kg

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center height: 300 mm Center width: 2000 mm Circumferential Ø: over bed 620 mm Spindle bore: 83 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 14 - 1000 rpm Feeds: longitudinal/flat 0.086-4.842/0.04-2.258 mm/rev Thread pitches: 0.5 - 28 mm Electrical connection: 380/400 V, 15 kW Space requirement: 3600 x 1200 x 1350 mm Weight: 3400 kg

PLC control, digital output, PLC expansion module -Manufacturer: Siemens, Simatic ET 200eco PN Digital Output Module -Type: 6ES7 142-6BR00-0AB0 6ES7142-6BR00-0AB0 -Number: 7 modules available - Price: per piece -Dimensions: 175/60/H50 mm -Weight: 0.9 kg/pc

Operating mode: fully automatic/inline or manual Belt Feeding/Insertion: Automatic Band width: 5 mm Output: approx. 36 p/min Option: With Parcel Press and Parcel Stopper Transport speed table belts: Infinitely adjustable Technical documentation: fully available Odometer reading: approx. 50,000 strapping

Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide -Manufacturer: Festo: Mini slide type DGSL-20-200-Y3A -Stroke: 200 mm -Shaft: Ø 10 mm -Dimensions: 450/85/H50 mm -Weight: 4.3 kg

Fan filter, fan array, air cooler, control cabinet fan, filter fan, cabinet cooler, axial fan -Manufacturer: Shen Zhen, axial fan type FP-20060EX S1-B -Voltage: 220-240 V / 65 W -Number: 5 fans available -Price: per piece -Dimensions: 200/200/H60 mm -Weight: 1.4 kg

Offer 24191 Specifications: - Welding current max 250 A 30% ED - 180 A 60% ED - 140 A 100% ED - Welding current adjustable in 8 stages - 30 A / 15 V - 300 A / 30 V - 4 roller wire feeders infinitely adjustable - 2 stroke + 4 stroke regulation - Weld seam lengths - time setting - Hosepack air-cooled approx. 3 m - Ground cable -Reducer - Connection 400 V - Space requirement approx. W 550 x H 1090 x D 950 mm - Weight approx. 140 kg