tetra pak 200 used for sale

ype: KRAMER + GREBE MW 200 Completely made of special stainless steel Specialized for grinding cheese and yellow cheese BLOCKS Hole plate diameter: 200 mm Hopper capacity: approx. 400 liters Synchronized speed for shatter and feed screw Working worm Machine dimensions in сm: Width: 215,0 Depth: 150,0 Height: 196,0 Main Motor Power: 45 kW Installed Power approx. 65 kW Voltage: 380 V, 50 Hz

8 Sulzer TPS Terry Looms 360cm Year 2000 8 Colours 16 Frames 20 Levers 1.25 Beams 1 Cloth roll 2 Weft feeders on the loom (total 29 pcs for 8 looms) Staubli dobby 2668 Heald wires and droppers 5000 Total number of beams are 20 for 8 machines

Briquetting press 1000 kg/h approx. 55 kW Diameter 75 mm

Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Number of shaker bottles: 1 piece -Cable length: approx. 6 m -Weight: 72 kg -Functionally tested

Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Number of vibrating bottles: 1 -Cable length: approx. 6 m -Weight: 105 kg

Grinding wheel, cup wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 50 mm -Outer diameter: Ø 200 mm -Width: 40 mm -Number: 12 grinding discs available Price: per piece -Weight: 2.1 kg

Offer 22569 Specifications: - Max. working width 2040 mm - max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - Motorized stroke upper beam - Max. stroke upper beam 85 mm - Max. adjustment of bending beam 80 mm - Manual bending process is supported by eccentric weight - Connection 400 V - Space requirement approx. W 3700 x H 1250 x D 450 mm - Weight approx. 1700 kg

Screed, vibrating screed, concrete trowel -electrically powered -Connection: 230 volts -Working width: 1500 mm -Dimensions: 1500/350/H450 mm -Weight: 17 kg

Vernier caliper, caliper, vernier caliper -Manufacturer: Massi, Vernier caliper with fine adjustment according to TGL 9252 -Measuring range: 0-2000 mm -Dimensions: 2260/302/H17 mm -Weight: 7.4 kg

Machine vice, sturdy vice, drill press vice -Machine vice: rotatable -Clamping jaws 200 x 55 mm -Clamping depth: 200 mm -Dimensions: 510/228/H190 mm -Weight: 64 kg

Offer up to 2 UTX Techlon 200 round slings (polyester) here. WLL: 20000kg EWL: 5m Unfortunately, they have been dragged over the hall floor a few times and are now quite dark, but they are technically very well preserved, have no cracks or cuts and the blue shield is completely present. Last test 01/2021, no more use after 07/2021

ELEKTRISCHER KASTENOFEN Verwendungszweck : Pulverhärtung Maximale Temperatur : 220ºC Das Heizsystem des Ofens ist als Zwangskonvektionssystem ausgelegt. Es basiert auf dem Prinzip, dass die Luft des Ofenvolumens mit Hilfe eines Umwälzgebläses in den Ofen gepumpt wird und die Ofentemperatur durch die Wärmeübertragung der Luft, die durch die Heizeinheit strömt, erhöht wird. Die Wände des Ofens und der Heizeinheit bestehen aus modularen Blechen und hochdichten Isolierplatten. Luftverteilungskanäle mit regulierbaren Klappen im Inneren des Ofens sorgen dafür, dass die Ofentemperatur an jedem Punkt gleichmäßig ist. Die Temperaturregelung ist digital und ermöglicht eine präzise Einstellung der Ofentemperatur. Die Heizeinheit wird seitlich, hinten oder oben am Ofen angebracht und besteht aus einer isolierten Heizkammer, einer Heizzelle mit Widerstand im Inneren, eine ...

T9STELA AIR HEATER indirect 2000 KW, SLI 2000; Weishauptbrenner L9T OIL Tel. 01715213204

Key data: 380 mm, 280 mm, 130 mm

Vest bezel range 200-380mm incl pins with rollers

Grinding wheel, cup wheel, bench grinder, surface grinder, cylindrical grinder -Manufacturer: Niles, grinding wheel - Inside: Ø 32 mm -Outside: Ø 200 mm -Width: 20 mm -Number: 2x discs available -Price per piece -Weight: 1.4 kg/pc.

Grinding wheel, cup wheel, bench grinder, surface grinder, cylindrical grinder -Manufacturer: Niles, grinding wheel 20 Jot - Inside: Ø 32 mm -Outside: Ø 200 mm -Width: 20 mm -Weight: 1.3 kg

• Stirring volume max. 200 l • Stirring speeds 100-1,000 rpm • Mounting plate 180 x 180 mm • Effective power 80 W • Max. Shaft torque 50 Ncm • Control unit Cimarec Telemodul 40 M (stirring start, stirring time, speed) • Mounted on a mobile stainless steel frame with inclined mounting plate with counter support (format part) for mounting a vessel with Ø 235 mm • Drive 230V/50-60Hz

Gear motor, electric motor, electric gear motor -Manufacturer: VEM, geared motor with brake -Type: G12-10/DK 84-200L -Speed: 40 rpm -Power: 0.75 kW -Construction: B3 -Shaft: Ø 25 x 50 mm -Protection class: IP 65 -Brake: 5 Nm -Dimension: 570/235/H195 mm -Weight: 34 kg

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic control valve, angle seat valve, valve -Manufacturer: Bürkert, pneumatically operated 2/2-way angle seat valve -Type: 2000A 40.0 PTFE VA -Connection: DN40 PN16 -Dimension: 220/100/H240 mm -Weight: 2.9 kg

Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck -Manufacturer: Schmid, rotary table with three-jaw chuck -Type: TWS200 -Mouth size: Ø 200 mm -Dimensions: 250/250/H365 mm -Weight: 52 kg

Lindner Micromat MS 2000 Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: approx. 80 rpm at 50 Hz. Rotor blade: 104 pcs. New Rotor blade shape: 43x43x19.5 mm Infill opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Wiper comb:yes Counter knife: yes Hydraulic power unit: complete Hydraulic cylinder sieve cassette:sieves 50x50 mm Total weight approx. 11 t Dimensions LxWxH mm: approx. 4520 x2970 x 2660 mm Viewing and trial run possible by appointment. Shipping time: immediately

Abrasive paper, emery paper, abrasive cloth, abrasive discs, abrasive bodies, bench grinder disc -Manufacturer: Rondo, bench grinder disc -Size/type: 200 x 32 x 51 -Material: SCg 80 I 5V40 -Weight: 1.7 kg

4-sided planer and roll forming machine with 5 shafts Finished dimensions 240 x 170

Effort 2000t moving matrix 280 mm landing pad 570 mm landing slider after closing the matrices 390 mm Number of moves of the ram, stroke / min 25 Electric motor power 160 kW Dimensions, mm: LWH = 856053604850, the level above the floor is 3200. Weight of the car without electricity: 239.8 tons. Weight of the bed: Front part: 82 tons. Rear part: 55t. Weight 270 ton

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Towing cube: heavy version -Material: cast iron -Holes: Ø 25 mm -Dimensions: 505/200/H150 mm -Weight: 30 kg

Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Stall bolts: Solar fasteners 49 pieces -Type: M10 x 200 -Price/Delivery: complete -Complete weight: 5 kg

Hackeranlage Rudnick Enners 650/200 Motor 37kw vibrorinen Metaldetector kratzforder Containerbefillen

max. plate width: 80 cm stamp width: 425 mm serial no.: 174 plate punch autoplate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DIXIE UNION, DIXIEVAC2000 Thermoformer, 400 Volt, 50 HZ, in working condition

Abrasive paper, emery paper, abrasive cloth, abrasive discs, abrasive bodies -Manufacturer: Tyrolit, grinding wheel 200x120x51.A170x80 unused original packaging -Type: SK-140499B.EOOB -Number: 3x grinding wheel available -Price per piece -Dimensions Ø 200 x 120 mm -Weight: 3.3 kg

Cover for electric hand pallet trucks -Handover: in its current condition as inspected -Damage: see photos -Manufacturer: Linde Cover from electric hand pallet truck -Dimensions: Ø 300 x 200 mm -Weight: 1 kg

Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering -Manufacturer: Logitrans, drawbar completely from pedestrian stacker SGL 2000V -Number: 1x drawbar available -Price per piece -Dimensions: 930/345/H110 mm -Weight: 12 kg/pc.

Notching width: max. 200 mm Notching depth: 40 mm Profile height: max. 100 mm Vise span: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by actuating the foot switch Profile tension by means of infinitely swivelling vice.

- Bread Slicer Slicer & Bread Packing Machine -Manufacturer: P+S Mako Verpackungsmaschinen GmbH Pfitzenmaier & Söhne - Type packaging: Rianta 84-CSS/2000

Gauge block, gauge blocks, gauge block holders -Manufacturer: Koba, End gauge holder with quick adjustment -Type: 100-200 -Dimensions: 105/70/H325 mm -Weight: 1.3 kg

SMI TEC COSMOS 2000 Digital Servo Drive / Servodriv NEW Quantity: 2 pieces Price: 2500 per piece

Inductive conductivity transmitter, conductivity transmitter, conductivity measurement -Manufacturer: EH Endress + Hauser, conductivity transmitter -Type: conducta XR 2 -Measurement range: 0 to 200 mS -Voltage: 220V 50/60Hz -Dimension: 180/95/H95 mm -Weight: 0.8 kg

V-belt pulley, belt pulley -V-belt pulley: pulley 1 grooved 200/1 with bearing - V-belt width: 17 mm -Intake: Ø 45 mm -Number: 1x pulley available -Dimension: Ø 186 x 32 mm -Weight: 5.5kg

Transport trolleys, pipe frame trolleys, drum trolleys, drum tippers -Barrel trolley: Barrel tipper for 200 liter barrel -Barrel support: 2 metal rollers Ø60 x 400 mm -Wheel equipment: 2 castors, 2 wheels -Bracket: for drip tray -Dimension: 990/610/H680 mm -Weight: 20 kg

UPS Effekta Pegasus 200 kVA Uninterruptible power supply 3 phases Batteries were renewed 06/2019 and are tested all still have between 12.9 and 13.0 V and that after 3 months, are stored on a separate pallet the power supply is in 1A condition and does not come from the manufacturing industry 2 months return policy

Siemens combined X-ray recording and fluoroscopy device Iconos R 200 with the following system components: Generator Polydoros SX 65 Tube Optitop 150/40/80 HC 0,6/1,0 Digital image processing Fluorospot Compact Sirecon 33-4 HDR image intensifier • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • The installation, commissioning and configuration of the system or system components must be carried out by the manufactur ...

Can depalletizer Kahl & Schlichterle type can DP 20000 capacity: up to 20.000 cph The palletizer is adjustable for one pallet size (has to be clarified) incl. manual loading per forklift construction in stainless steel pallet lifting system automatic carboard layer removal layer magazine control panel incl. Siemens S 7 The can depallitizer will handle two pallet formats and five different can sizes

Barrel rack, barrel support, barrel pallet, barrel trolley, barrel tipper -Keg rack: keg pallet for 200 liter kegs -Recording: can be transported with a forklift, see photos -Number: 2x frame available -Price per piece -Dimension: 1300/800/H275 mm -Weight: 25 kg/pc.

Probe, touch probe, 3D probe, stylus, probe head, digimatic indicator, scanning head, measuring head -Manufacturer: Heidenhain, scanning head -Type: LIDA 19/200 -ID No.: 233 039-16 -Number: 2x scanning head available -Price per piece -Dimension: 180/90/H40 mm -Weight: 0.3kg/pc.

Sell a Budmasz WEB 200 concrete and screed cutter. Working width: 195mm Drive Type: Electricity Suction possible. The machine is in good condition, functional and tested.

Sell a GUK folding machine Cartonac 2000-2 on behalf of a customer More information on request.

Several used old-type tanks from the 80s, capacity approximately 10.000-20.000 liters

Four-jaw chuck, 4-jaw chuck -Four-jaw chuck: chuck size Ø 200 mm -Passage: Ø 60 mm -Bolt circle: Ø 175 mm -Weight: 13.8kg

Flat pulley, belt pulley, drive pulley, roller pulley -Pulley: flat pulley material cast aluminum Ø 290 mm -Width 200mm -Intake: Ø 60 x 120 mm -Bolt circle: Ø 80 mm M6 -Dimensions: Ø 290 x 200 mm -Weight: 6.3 kg