tetra pak 200 used for sale

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 54 mm -Rezess: Ø 159 mm -Hole circle: 176 mm -Weight: 14.2 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -threaded mounting -Through hole: Ø 53 mm -Weight: 19.7 kg

Clipping machine Technopack KDCVT 200 Type: KDCVT 200 Dimensions: 100x60x190cm Maximum closing diameter: 120mm Delivery time: 30 working days after advanced payment

cleaned & checked 220 Volt / 1500 Watt / 50-60 cycles (Hz)

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Hole circle: 156 mm -Passage: Ø 54 mm -Weight: 12.7 kg

Flange mounting, driving flange -Chuck flange with: driving pin -Outer diameter: 200 mm -Short taper mount for: bayonet disc mounting DIN 55027 -Cone size: 5 -Hole circle: Ø 104.8 mm -Weight: 9 kg

Offer 08533 Measurement.- Richt. and welding plate Specifications: - Length approx. 2000 mm - Width approx. 1500 mm - Material thickness of the upper plate approx. 40 mm - Total height of the ribbed plate approx. 180 mm - Total height plate with steel base approx. 850 mm - Weight approx. 1800 kg

Plasma Cutter VCS 2000, HiPerformance Plasma HPR 260 XD and suction Filtercube 4H 7500 m³/h volume flow. To be visited in operation.

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Admission recess: Ø 168 mm -Passage: Ø 55 mm -Weight: 12 kg

Corundum disc mill & excenter screw pump Manufacturer: Fryma Type: MK-200 Power: 15 kW with double jacket (heating & cooling) new grinding discs, with new spare grinding disc pair with pressure gauge with vessel (LBH: 730 x 730 x 900 mm) with excenter screw pump: speed-controlled, with sight glass Power: 0.55 kW LBH: 1100 x 230 x 270 mm LBH corundum disc mill: 650 x 450 x 950 mm

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 200 mm -Piston diameter: 43 mm -Piston rod: 25 mm -Total length: 390 mm -Total length extended: 590 mm -Price: per piece -Quantity: 2 available -Dimensions: 100/100/H390 mm -Weight: 6.5 kg/piece

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 200 mm -Piston diameter: 60 mm -Piston rod: 32 mm -Total length: 425 mm -Total length extended: 625 mm -Price: per piece -Number: 2x available -Dimensions: 150/150/H425 mm -Weight: 12.1 kg/piece

Micrometer, micrometer screw -Measuring range: 200 - 225 mm -without: test piece -Also other sizes: available -Weight: 1.4 kg

Electric motor, three-phase motor -Volt: 415 V. -Power: 0.063/0.4 kW -Speed: 460/2840 rpm -Shaft: Ø 17 x 35 mm -Construction: B14 -Protection class: IP 65 -Dimensions: 330/220/H170 mm -Weight: 9 kg

Specifications: - Grinding wheel diameter approx. 200 mm - Grinding wheel width approx. 25 mm - Grinding wheel bore approx. 51 mm - Disc speed 1450 rpm - Drive 400 V / 0.7 kW - Space requirement approx. W 600 x H 400 x D 350 mm - Weight approx. 30 kg - Console for wall mounting

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 55 mm -Weight: 12 kg

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 54 mm -with: base plate -Weight: 26 kg

Jabsco 200 pump Stainless pump, 18l hopper, up to 200L per min, 316 stainless, temp 4'C - 70'C, ideaf for pumping foods, sauces, dough, meat pastes, liquid egg, yogurts, creams, dairy products, pharmaceutical products and lots more, 1.5Kw motor, 3Ph

Three-phase motor, electric motor -Power: 30 kW -Speed: 2945 rpm -Protection class: IP 55 -Construction: B5 -Shaft: Ø 55 mm -Number: 1x available (1x without fan cover and fan disc) -Price: per piece -Dimensions: 760/400/H500 mm -Weight: 237 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 500 x 200 mm -4x T slots: 14 mm -Clamping angle: rotatable, swiveling, tiltable -Foot recording: mm -Dimensions: 500/300/H210 mm -Weight: 50.5 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.75 kW -Speed: 3000 rpm -Max. grinding wheels: Ø 200 x 32 mm -Operating voltage: 380 volts -Dimensions: 540/280/H1230 mm -Weight: 116 kg

WE OFFER AN NICE CONDITION LVD , WE CAN MAKE FOR CUSTOMER AS WELL START UP OF MACHINE INCLUDING TRAINING CUTTING CAPACITY 4KW CUTTING PLATES 6000 X 2000 MACHINE WAS COMPLETE OWERHAULED 2 YEARS AGO - SERVIS COST WAS 35000 EUR LAST SERVICE WAS MADE 6 MONTHS AGO MACHINE RUNNING IN THE PRODUCTION TILL FIRST WEEK IN MARCH 2022 WE OFFER MACHINE LOADED ON TRUCK. NEEDS 2 TRUCK FOR TRANSPORT, NORMAL TRUCK FOR CLIENT WE CAN ORGANIZE TRANSPORT AS WELL WE OFFER MACHINE FREE LOADED ON TRUCK. LASER- GE FANUC C4000 - MODEL E TRANSPORT FOR CUSTOMER WE CAN ORGANIZE AS WELL

Gear motor, electric motor, three-phase motor, electric gear motor -Transfer in current condition as seen -Speed: 112/224 rpm -Power: 0.5/0.7 kW -Construction: B3 -Diameter shaft: Ø 24 mm -Protection class: IP 54 -Dimensions: 400/220/H205 mm -Weight: 23 kg

Dear Sir or Madam, we have now available used transformer stations Year of construction : 2001-2002 Power : 1600KVA Primary voltage : 20kV Secondary voltage: 690V, Switching group: DYN5 Switchgear: SF6 total weight per station is 12.5 tons Dimensions: Length = Width = Height = Immediately ready for use and available, nationwide cheap delivery. If you have any further questions, Mr. Schmidt Techn. Purchasing is there for you, available Monday to Saturday from 8 a.m. to 10 p.m. and in case of emergency 24 hours

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 200 mm -Passage: Ø 50 mm -one set: hard interchangeable jaws -Weight: 15 kg

Paneling Finn-Power Bending Automation Mod. Bending Cell Type BC 2550 200 year 1999 Hours: 27.800 This machine is in good condition and worked for few hours. I point out to you that there is an oil leak wich comes from a cylinder. The machine is functioning and in case of your visit, it can be connected again.

Specifications: - working length 3500 mm - Stand passage 3050 mm - max pressing force 2000 kN - Distance table / ram max. 480 mm - Stand projection 260 mm - Ram stroke approx. 300 mm - Lifting speeds - Downspeed idle max. 100 mm/sec - Boost speed 80 mm/sec - Downward pressing speed max. 10 mm/sec - Total drive power 25 kW - Space requirement approx. W 4500 x H 3150 x D 2100 mm - Weight approx. 16000 kg -with: - CNC control CYBELEC renewed in 2008 - controlled crowning device - controlled backgauge with height adjustment 5 - 1000 mm - hydr. Tool clamping - Upper tool + universal die tool - Material requirements - Two-hand control panel

Available in stock 5 x Used Capstone Smart Proportional Valves. We have the following units available: - 3 x SPV Assy P/N 503044-200 complete with gaseous fuel valve P/N 506617-100 (Op. Press. 50 PSIG / Proof Press. 3500 PSIG); - 1 x SPV 25 24VOLTS P/N 511978-100R complete with gaseous fuel valve (Op. Press. 0-100 PSIG); - 1 x GSPV 12VOLTSD P/N 509736-100 complete with gaseous fuel valve (Op. Press. 75 PSIG / Proof Press 3500 PSIG): The unit are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Key data: 1200 , 800

Clamping table in absoult as good as new condition! (Distort pictures, but table is straight!) The table comes from the area of a turbine assembly and is in top condition! Metrics: Width 1.200mm Depth 800mm Height 800mm Weight 700kg Number of T-slots 7 pieces T-slot table

Mixer 200 liters - NEW Hopper capacity: 200 l Two levels of hoper Two working shafts with paddles Power: 2.2 kW Dimensions L/W/H– 1400/750/1250 Weight: 300 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 200 mm -hard: interchangeable jaws -Base plate for: machine table -Passage: Ø 54 mm -Weight: 22 kg

Three-jaw chuck, three-jaw lathe chuck -without: interchangeable jaws -Mouth size: Ø 200 mm -Recess: Ø 162 mm -Bolt circle: 3 x 180 mm -Passage: Ø 52 mm -Weight: 13 kg

Used bread line W&P -Refurbished- 1) Haton CR-59 Kegerundwirker, heated, lubrication, frequency control, automatic slide 2) Haton AF 2002 proofer, fully automated, digital control 3) Conveyor belt 4) Haton Combi U long roller table, very flexible 5) By-Pass tape to bypass the proofer, directly to the Combi U long roller The entire line is completely overhauled and in perfect condition! Warranty 6 months Please note: The V-300 dough divider is not part of this offer as it is already sold! Alternatively, a RHEON VX 202 Twin Divider can be offered for high-quality Artisan products.

Beading machine Prinzing Type SME 200/11 Year of construction 2006 Projection 1100mm Connected load 5,5KW sheet thickness 1.5mm VA Control Siemens Siematic OP7 Extras: -Parallel lining of the top roll with rolling bearing working shafts -infinitely variable motor for drive -motorized delivery of the harmonic, infinitely variable -Feed control for automatic with sensor control Sheet metal guide device in table design Total weight 6700kg The offer is aimed exclusively at traders within the meaning of § 14 BGB No sale to private individuals!

The scope of delivery includes: 01x Holder f. Push-through protection, used Material color: sendzimir galvanized Manufacturer: SLP Leg A: approx. 200 x 140 mm Leg B: approx. 200 x 38 mm Opening dimension: approx. 52 x 32 mm for rectangular tube: 50 x 30 mm

Here, you will find no hidden costs. The advertisement concerns the basic version of the machine. All optional extras and their prices can be seen on the received sales quote or by contacting our specialist. We always present the final amount to be paid on sales quotes if the contract is signed within the quote valid period. We always evaluate transport costs from our warehouse in Poland. QC12Y 4x2000 SMO-2004-N Hydraulic press brake Specifications - Maximum thickness mild steel (PN-EN S235): up to 4.0 mm - Maximum working length: 2000 mm - Cutting angle: 0.5 - 1.5° Eufzrzpm0 - Strokes/minute: 6 - 20 - Backgauge retract distance: 600 mm - Motor power: 4.0 kW - Length: 2700 mm - Width: 1500 mm - Height: 1650 mm - Total mass: 2500.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working len ...

new ! all stainless steel closed lid with seal 2 mixing directions (manual or automatic) CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.300 x 600 x 1.300 mm Perfectly suitable for dry products, such as: spices, ingredients, powders, granulates, nuts, grains, seeds, kernels, dried fruit, Granola, ..

You will find no hidden costs with us We always present the final amount on sales quotes if the contract is signed within the quote valid period. We always evaluate shipping costs from our warehouse in Poland. Laser welder LWH-2000-N The kit includes: - laser welder with cooling system - welding gun with adjustable focal length and set of accessories - fiber laser source MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz Welding and cutting Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual pla ...

Three-jaw chuck, 3-jaw chuck -Type: DHB 200x3x5 TGL 30 2332 -Mouth size: Ø 200 mm -Passage: Ø 54 mm -max.: 3000 rpm -Short taper mount: Ø 105 mm -Weight: 24 kg

Clamping angle for workpiece clamping -Dimensions: 200/320/H220 mm -Thickness: 25 mm -Groove: 20 mm -Surface: milled -Weight: 22.7 kg

Function generator, oscilloscope -Frequency range: 0.2 Hz to 240 kHz -Dimensions: 225/225/H85 mm -Weight: 1.2 kg

Mixer-grinder 200 mm 200 mm hole plate diameter Almost completely made of solid stainless steel 2-speed working worm 1-speed mixing paddle motor, approx. 1,5 kW with 2 mixing arms, independent of working worm, with automatic drive Hopper capacity approx. 300 litres (mixing capacity approx. 150 kg) Integrated lifting device, for standard meat bins Machine dimensions in cm: Width: 265,0 Depth: 175,0 Height: 190,0 Power of the motor: 37,0 kW Installed power: 40,0 kW Voltage: 380 V, 50 Hz Machine weight: approx. 1200 kg

Workbench, work table, assembly bench -Width: 2000 mm -Depth: 950 mm -Height: 875 mm -Number: 1x drawers -with storage space for a tool trolley -Weight: 108 kg

Airprofi 853/200 Compressor Maximum volume flow: 850 l/min Filling capacity approx.: 680 l/min Maximum pressure: 10 bar Container capacity 200 l Speed: 1240 1/min Motor power: 5.5 kW Weight: 139 kg Sound pressure level: 95 dB(A) G&STÜ-2018832

Spiral kneader with vat trolley Diosna SP 240 AD Incl. 3 vat trolleys 2 speed, traditional control Power in dough: 200 kg Vat diameter: 900 mm Friction wheel drive Pliers locking

Lid Maho DMC-200 U serie 1512 5-axis CNC universal machining center, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameter x height: 1950x1100 mm Travel X-axis: 1800 mm Travel Y-axis: 2000 mm Travel Z-axis: 1100 mm C-axis table rotation: 360° B-axis travel: -7/187° Spindle speed: 18000 1/min Spindle cone: HSK-A63 Spindle motor: 28/19 kW Magazine capacity: 120 Required footprint: 11200x12300 mm Height: 4375 mm Weight: 58000 kg For any questions about the machine, as well as a scheduling for the inspection, we ask you to contact us by phone or e-mail.

width of the strips: 75 mm band length: 2000 mm band speed: 30 - 34 m/sec total power requirement: 4,1 HP weight of the machine ca.: 75 Kg dimensions of the machine ca.: 1,2 x 0,5 x 0,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Extraction dedusting Walther NOVA 2000 with 2 extraction arms mobile on wheels 2 pieces available Very good operational condition!

Electric motor, three-phase motor -Volt: 415 V. -Power: 0.063/0.4 kW -Speed: 460/2840 rpm -Shaft: Ø 17 x 35 mm -Construction: B14 -Protection class: IP 65 -Price: per piece -Number: 3x available -Dimensions: 395/210/H190 mm -Weight: 7 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Piston: Ø 50 mm stroke: 200 mm -Piston rod: Ø 20 mm -Quantity: 1x available --Dimensions: 65/65/H580 mm -Weight: 4.2 kg